* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* Refactor signature of Application.CheckTx
* Refactor signature of Application.DeliverTx
* Refactor example variable names for clarity and consistency
* Rename method variables for consistency
* Rename method variables for consistency
* add a changelog entry
* update docs
## PR
This PR introduces a fundamental breaking change to the structure of ABCI response and tx tags and the way they're processed. Namely, the SDK can support more complex and aggregated events for distribution and slashing. In addition, block responses can include duplicate keys in events.
Implement new Event type. An event has a type and a list of KV pairs (ie. list-of-lists). Typical events may look like:
"rewards": [{"amount": "5000uatom", "validator": "...", "recipient": "..."}]
"sender": [{"address": "...", "balance": "100uatom"}]
The events are indexed by {even.type}.{even.attribute[i].key}/.... In this case a client would subscribe or query for rewards.recipient='...'
ABCI response types and related types now include Events []Event instead of Tags []cmn.KVPair.
PubSub logic now publishes/matches against map[string][]string instead of map[string]string to support duplicate keys in response events (from #1385). A match is successful if the value is found in the slice of strings.
closes: #1859closes: #2905
## Commits:
* Implement Event ABCI type and updates responses to use events
* Update messages_test.go
* Update kvstore.go
* Update event_bus.go
* Update subscription.go
* Update pubsub.go
* Update kvstore.go
* Update query logic to handle slice of strings in events
* Update Empty#Matches and unit tests
* Update pubsub logic
* Update EventBus#Publish
* Update kv tx indexer
* Update godocs
* Update ResultEvent to use slice of strings; update RPC
* Update more tests
* Update abci.md
* Check for key in validateAndStringifyEvents
* Fix KV indexer to skip empty keys
* Fix linting errors
* Update CHANGELOG_PENDING.md
* Update docs/spec/abci/abci.md
Co-Authored-By: Federico Kunze <31522760+fedekunze@users.noreply.github.com>
* Update abci/types/types.proto
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update docs/spec/abci/abci.md
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update libs/pubsub/query/query.go
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update match function to match if ANY value matches
* Implement TestSubscribeDuplicateKeys
* Update TestMatches to include multi-key test cases
* Update events.go
* Update Query interface godoc
* Update match godoc
* Add godoc for matchValue
* DRY-up tx indexing
* Return error from PublishWithEvents in EventBus#Publish
* Update PublishEventNewBlockHeader to return an error
* Fix build
* Update events doc in ABCI
* Update ABCI events godoc
* Implement TestEventBusPublishEventTxDuplicateKeys
* Update TestSubscribeDuplicateKeys to be table-driven
* Remove mod file
* Remove markdown from events godoc
* Implement TestTxSearchDeprecatedIndexing test
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
* Remove deprecated PanicXXX functions from codebase
As per discussion over
[here](https://github.com/tendermint/tendermint/pull/3456#discussion_r278423492),
we need to remove these `PanicXXX` functions and eliminate our
dependence on them. In this PR, each and every `PanicXXX` function call
is replaced with a simple `panic` call.
* add a changelog entry
Fixes#3457
The topic of the issue is that : write a BlockRequest int requestsCh channel will create an timer at the same time that stop the peer 15s later if no block have been received . But pop a BlockRequest from requestsCh and send it out may delay more than 15s later. So that the peer will be stopped for error("send nothing to us").
Extracting requestsCh into its own goroutine can make sure that every BlockRequest been handled timely.
Instead of the requestsCh handling, we should probably pull the didProcessCh handling in a separate go routine since this is the one "starving" the other channel handlers. I believe the way it is right now, we still have issues with high delays in errorsCh handling that might cause sending requests to invalid/ disconnected peers.
When remove peer, block pool simple remove bpPeer,
but do not stop timer, that cause stopError for recorrected
peers. Stop timer when remove from pool.
* changelog: use issue number instead of PR number
* follow up to #3291
- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()
* cmd/show_validator: wrap err to make it more clear
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* types.NewCommit
* use types.NewCommit everywhere
* fix log in unsafe_reset
* memoize height and round in constructor
* notes about deprecating toVote
* bring back memoizeHeightRound
* types: memoize height/round in commit instead of first vote
* types: commit.ValidateBasic in VerifyCommit
* types: new CommitSig alias for Vote
In preparation for reducing the redundancy in Commits, we introduce the
CommitSig as an alias for Vote. This is non-breaking on the protocol,
and minor breaking on the Go API, as Commit now contains a list of
CommitSig instead of Vote.
* remove dependence on ToVote
* update some comments
* fix tests
* fix tests
* fixes from review
* Begin simple merkle compatibility PR
* Fix query_test
* Use trillian test vectors
* Change the split point per RFC 6962
* update spec
* refactor innerhash to match spec
* Update changelog
* Address @liamsi's comments
* Write the comment requested by @liamsi
* p2p/conn: FlushStop. Use in pex. Closes#2092
In seed mode, we call StopPeer immediately after Send.
Since flushing msgs to the peer happens in the background,
the peer connection is often closed before the messages are
actually sent out. The new FlushStop method allows all msgs
to first be written and flushed out on the conn before it is closed.
* fix dummy peer
* typo
* fixes from review
* more comments
* ensure pex doesn't call FlushStop more than once
FlushStop is not safe to call more than once,
but we call it from Receive in a go-routine so Receive
doesn't block.
To ensure we only call it once, we use the lastReceivedRequests
map - if an entry already exists, then FlushStop should already have
been called and we can return.
* validate reactor messages
Refs #2683
* validate blockchain messages
Refs #2683
* validate evidence messages
Refs #2683
* todo
* check ProposalPOL and signature sizes
* add a changelog entry
* check addr is valid when we add it to the addrbook
* validate incoming netAddr (not just nil check!)
* fixes after Bucky's review
* check timestamps
* beef up block#ValidateBasic
* move some checks into bcBlockResponseMessage
* update Gopkg.lock
Fix
```
grouped write of manifest, lock and vendor: failed to export github.com/tendermint/go-amino: fatal: failed to unpack tree object 6dcc6ddc14
```
by running `dep ensure -update`
* bump year since now we check it
* generate test/p2p/data on the fly using tendermint testnet
* allow sync chains older than 1 year
* use full path when creating a testnet
* move testnet gen to test/docker/Dockerfile
* relax LastCommitRound check
Refs #2737
* fix conflicts after merge
* add small comment
* some ValidateBasic updates
* fixes
* AppHash length is not fixed
* p2p: NodeInfo is an interface
* (squash) fixes from review
* (squash) more fixes from review
* p2p: remove peerConn.HandshakeTimeout
* p2p: NodeInfo is two interfaces. Remove String()
* fixes from review
* remove test code from peer.RemoteIP()
* p2p: remove peer.OriginalAddr(). See #2618
* use a mockPeer in peer_set_test.go
* p2p: fix testNodeInfo naming
* p2p: remove unused var
* remove testRandNodeInfo
* fix linter
* fix retry dialing self
* fix rpc
We are swapping the exisiting listener implementation with the newly
introduced Transport and its default implementation MultiplexTransport,
removing a large chunk of old connection setup and handling scattered
over the Peer and Switch code. The Switch requires a Transport now and
handles externally passed Peer filters.
* remove ConsensusParams.TxSize and ConsensusParams.BlockGossip
Refs #2347
* block part size is now fixed
Refs #2347
* use max data size, not max bytes for tx limit
Refs #2347
- state.MakeBlock takes a proposerAddr
- validateBlock only checks that the ProposerAddress is in the validator
set
- fix raceyness from bad proposer test:
- use privValidator to get the proposer address (instead of racy
state)
- note we had to remove the test that checked the correct proposer was
included for higher rounds because we don't have a good way to test
this with multiple consensus states and not using the
privValidator.Address while calling createProposalBlock was a hack!
Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.
Ref discussion: https://github.com/tendermint/tendermint/pull/1966Closes#1956
This commit switches all usage of math/rand to cmn's rand. The only
exceptions are within the random file itself, the tools package, and the
crypto package. In tools you don't want it to lock between the go-routines.
The crypto package doesn't use it so the crypto package have no other
dependencies within tendermint/tendermint for easier portability.
Crypto/rand usage is unadjusted.
Closes#1343
Anca Zamfir
Marko
Thane Thomson
Alexander Bezobchuk
Anton Kaliaev
JamesRay
zjubfd
Ismail Khoffi
Alessio Treglia
Ethan Buchman
Dev Ojha
Zach
Alexander Simmerl
Zarko Milosevic
peerlink
VenkatDatta
Jae Kwon
ValarDragon