* base verifier: bc->bv and check chainid
* improve some comments
* comments in dynamic verifier
* fix comment in doc about BaseVerifier
It requires the validator set to perfectly match.
* failing test for #2862
* move errTooMuchChange to types. fixes#2862
* changelog, comments
* ic -> dv
* update comment, link to issue
* more proposer priority tests
- test that we don't reset to zero when updating / adding
- test that same power validators alternate
* add another test to track / simulate similar behaviour as in #2960
* address some of Chris' review comments
* address some more of Chris' review comments
* temporarily pushing branch with the following changes:
The total power might change if:
- a validator is added
- a validator is removed
- a validator is updated
Decrement the accums (of all validators) directly after any of these events
(by the inverse of the change)
* Fix 2960 by re-normalizing / scaling priorities to be in bounds of total
power, additionally:
- remove heap where it doesn't make sense
- avg. only at the end of IncrementProposerPriority instead of each
iteration
- update (and slightly improve)
TestAveragingInIncrementProposerPriorityWithVotingPower to reflect
above changes
* Fix 2960 by re-normalizing / scaling priorities to be in bounds of total
power, additionally:
- remove heap where it doesn't make sense
- avg. only at the end of IncrementProposerPriority instead of each
iteration
- update (and slightly improve)
TestAveragingInIncrementProposerPriorityWithVotingPower to reflect
above changes
* fix tests
* add comment
* update changelog pending & some minor changes
* comment about division will floor the result & fix typo
* Update TestLargeGenesisValidator:
- remove TODO and increase large genesis validator's voting power
accordingly
* move changelog entry to P2P Protocol
* Ceil instead of flooring when dividing & update test
* quickly fix failing TestProposerPriorityDoesNotGetResetToZero:
- divide by Ceil((maxPriority - minPriority) / 2*totalVotingPower)
* fix typo: rename getValWitMostPriority -> getValWithMostPriority
* test proposer frequencies
* return absolute value for diff. keep testing
* use for loop for div
* cleanup, more tests
* spellcheck
* get rid of using floats: manually ceil where necessary
* Remove float, simplify, fix tests to match chris's proof (#3157)
* consensus: createProposalBlock function
* blockExecutor.CreateProposalBlock
- factored out of consensus pkg into a method on blockExec
- new private interfaces for mempool ("txNotifier") and evpool with one function each
- consensus tests still require more mempool methods
* failing test for CreateProposalBlock
* Fix bug in include evidece into block
* evidence: change maxBytes to maxSize
* MaxEvidencePerBlock
- changed to return both the max number and the max bytes
- preparation for #2590
* changelog
* fix linter
* Fix from review
Co-Authored-By: ebuchman <ethan@coinculture.info>
* Begin simple merkle compatibility PR
* Fix query_test
* Use trillian test vectors
* Change the split point per RFC 6962
* update spec
* refactor innerhash to match spec
* Update changelog
* Address @liamsi's comments
* Write the comment requested by @liamsi
* Consistent order fields of Timestamp/BlockID fields in CanonicalVote and
CanonicalProposal
* update spec too
* Introduce and use IsZero & IsComplete:
- update IsZero method according to spec and introduce IsComplete
- use methods in validate basic to validate: proposals come with a
"complete" blockId and votes are either complete or empty
- update spec: BlockID.IsNil() -> BlockID.IsZero() and fix typo
* BlockID comes first
* fix tests
* Validating that there are txs in the query results before loop throught the array
* Created tests to validate the error has been fixed
* Added comments
* Fixing misspeling
* check if the variable "skipCount" is bigger than zero. If it is not, we set it to 0. If it, we do not do anything.
* using function that validates the skipCount variable
* undo Gopkg.lock changes
* Close and recreate a RemoteSigner on err
* Update changelog
* Address Anton's comments / suggestions:
- update changelog
- restart TCPVal
- shut down on `ErrUnexpectedResponse`
* re-init remote signer client with fresh connection if Ping fails
- add/update TODOs in secret connection
- rename tcp.go -> tcp_client.go, same with ipc to clarify their purpose
* account for `conn returned by waitConnection can be `nil`
- also add TODO about RemoteSigner conn field
* Tests for retrying: IPC / TCP
- shorter info log on success
- set conn and use it in tests to close conn
* Tests for retrying: IPC / TCP
- shorter info log on success
- set conn and use it in tests to close conn
- add rwmutex for conn field in IPC
* comments and doc.go
* fix ipc tests. fixes#2677
* use constants for tests
* cleanup some error statements
* fixes#2784, race in tests
* remove print statement
* minor fixes from review
* update comment on sts spec
* cosmetics
* p2p/conn: add failing tests
* p2p/conn: make SecretConnection thread safe
* changelog
* IPCVal signer refactor
- use a .reset() method
- don't use embedded RemoteSignerClient
- guard RemoteSignerClient with mutex
- drop the .conn
- expose Close() on RemoteSignerClient
* apply IPCVal refactor to TCPVal
* remove mtx from RemoteSignerClient
* consolidate IPCVal and TCPVal, fixes#3104
- done in tcp_client.go
- now called SocketVal
- takes a listener in the constructor
- make tcpListener and unixListener contain all the differences
* delete ipc files
* introduce unix and tcp dialer for RemoteSigner
* rename files
- drop tcp_ prefix
- rename priv_validator.go to file.go
* bring back listener options
* fix node
* fix priv_val_server
* fix node test
* minor cleanup and comments
* Don't use pointer receivers for PubKeyMultisigThreshold
* test that showcases panic when PubKeyMultisigThreshold are used in sdk:
- deserialization will fail in `readInfo` which tries to read a
`crypto.PubKey` into a `localInfo` (called by
cosmos-sdk/client/keys.GetKeyInfo)
* Update changelog
* Rename routeTable to nameTable, multisig key is no longer a pointer
* sed -i 's/PubKeyAminoRoute/PubKeyAminoName/g' `grep -lrw PubKeyAminoRoute .`
upon Jae's request
* AminoRoutes -> AminoNames
* sed -e 's/PrivKeyAminoRoute/PrivKeyAminoName/g'
* Update crypto/encoding/amino/amino.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* split immutable and mutable parts of priv_validator.json
* fix bugs
* minor changes
* retrig test
* delete scripts/wire2amino.go
* fix test
* fixes from review
* privval: remove mtx
* rearrange priv_validator.go
* upgrade path
* write tests for the upgrade
* fix for unsafe_reset_all
* add test
* add reset test
* config: cors options are arrays of strings, not strings
Fixes#2980
* docs: update tendermint-core/configuration.html page
* set allow_duplicate_ip to false
* in `tendermint testnet`, set allow_duplicate_ip to true
Refs #2712
* fixes after Ismail's review
* crypto: revert to mainline Go crypto lib
We used to use a fork for a modified bcrypt so we could pass our own
randomness but this was largely unecessary, unused, and a burden.
So now we just use the mainline Go crypto lib.
* changelog
* fix tests
* version and changelog
* config: cors options are arrays of strings, not strings
Fixes#2980
* docs: update tendermint-core/configuration.html page
* set allow_duplicate_ip to false
* in `tendermint testnet`, set allow_duplicate_ip to true
Refs #2712
* fixes after Ismail's review
* Revert "set allow_duplicate_ip to false"
This reverts commit 24c1094ebc.
* optimize addProposalBlockPart
* optimize addProposalBlockPart
* if ProposalBlockParts and LockedBlockParts both exist,let LockedBlockParts overwrite ProposalBlockParts.
* fix tryAddBlock
* broadcast lockedBlockParts in higher priority
* when appHeight==0, it's better fetch genDoc than state.validators.
* not save state if replay from height 1
* only save state if replay from height 1 when stateHeight is also 1
* only save state if replay from height 1 when stateHeight is also 1
* only save state if replay from height 0 when stateHeight is also 0
* handshake info's response version only update when stateHeight==0
* save the handshake responseInfo appVersion
(left after committing a block)
Fixes#2961
--------------
ORIGINAL ISSUE
Tendermint version : 0.26.4-b771798d
ABCI app : kv-store
Environment:
OS (e.g. from /etc/os-release): macOS 10.14.1 What happened: Set
mempool.recheck = false and create empty block = false in config.toml.
When transactions get added right between a new empty block is being
proposed and committed, the proposer won't propose new block for that
transactions immediately after. That transactions are stuck in the
mempool until a new transaction is added and trigger the proposer.
What you expected to happen: If there is a transaction left in the
mempool, new block should be proposed immediately.
Have you tried the latest version: yes
How to reproduce it (as minimally and precisely as possible): Fire two
transaction using broadcast_tx_sync with specific delay between them.
(You may need to do it multiple time before the right delay is found, on
my machine the delay is 0.98s)
Logs (paste a small part showing an error (< 10 lines) or link a
pastebin, gist, etc. containing more of the log file):
https://pastebin.com/0Wt6uhPF
Config (you can paste only the changes you've made): [mempool] recheck =
false create_empty_block = false
Anything else we need to know: In mempool.go, we found that proposer
will immediately propose new block if
Last committed block has some transaction (causing AppHash to changed)
or mem.notifyTxsAvailable() is called. Our scenario is as followed.
A transaction is fired, it will create 1 block with 1 tx (line 1-4 in
the log) and 1 empty block. After the empty block is proposed but before
it is committed, second transaction is fired and added to mempool. (line
8-16) Now, since the last committed block is empty and
mem.notifyTxsAvailable() will be called only if mempool.recheck = true.
The proposer won't immediately propose new block, causing the second
transaction to stuck in mempool until another transaction is added to
mempool and trigger mem.notifyTxsAvailable().
Fixes#2715
In crawlPeersRoutine, which is performed when seedMode is run, there is
logic that disconnects the peer's state information at 3-hour intervals
through the duration value. The duration value is calculated by
referring to the created value of MConnection. When MConnection is
created for the first time, the created value is not initiated, so it is
not disconnected every 3 hours but every time it is disconnected. So,
normal nodes are connected to seedNode and disconnected immediately, so
address exchange does not work properly.
https://github.com/tendermint/tendermint/blob/master/p2p/pex/pex_reactor.go#L629
This point is not work correctly.
I think,
https://github.com/tendermint/tendermint/blob/master/p2p/conn/connection.go#L148
created variable is missing the current time setting.
deliverTxResCh, like any other eventBus (pubsub) channel, is closed when
eventBus is stopped. We must check if the channel is still open. The
alternative approach is to not close any channels, which seems a bit
odd.
Fixes#2408
* types: ValidatorSet.Update preserves ProposerPriority
This solves the other issue discovered as part of #2718,
where Accum (now called ProposerPriority) is reset to
0 every time a validator is updated.
* update changelog
* add test
* update comment
* Update types/validator_set_test.go
Co-Authored-By: ebuchman <ethan@coinculture.info>
* Enforce validators can only use the correct pubkey type
* adapt to variable renames
* Address comments from #2636
* separate updating and validation logic
* update spec
* Add test case for TestStringSliceEqual, clarify slice copying code
* Address @ebuchman's comments
* Split up testing validator update execution, and its validation
Modify lookForHeight to return a height only there's a equal operator.
Previously, it was returning a height even for range conditions: "height
< 10000".
Fixes#2759
Ethan Buchman
Ismail Khoffi
Anton Kaliaev
Dev Ojha
Gian Felipe
Alessio Treglia
yutianwu
Zach
Jae Kwon
JamesRay
mircea-c
Daniil Lashin
srmo
Jernej Kos