Re-organize configuration options to allow non-patented/un-licensed builds.
Include AAC and WMA codecs without BUILD_PATENTED
Signed-off-by: Ted Hess <thess@kitschensync.net>
Bug: If DHCPv4 MAC are used to infer SLAAC and the forth position of
the subnet /64 is 0 (X:X:X:0::/64), then DNS records where malformed.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
PulseAudio in some cases does not detect the ARM CPU's capabilities
correctly and enables NEON ASM while it is not supported. For example
when compiling for arm_arm1176jzf-s_vfp the assembler rejects this and
the compile fails:
{standard input}: Assembler messages:
{standard input}:27: Error: selected processor does not support `vld1.16 {d0},[r1]!' in ARM mode
{standard input}:28: Error: selected processor does not support `vmovl.s16 q0,d0' in ARM mode
{standard input}:29: Error: selected FPU does not support instruction -- `vcvt.f32.s32 q0,q0,#15'
{standard input}:31: Error: selected processor does not support `vst1.32 {q0},[r2]!' in ARM mode
{standard input}:70: Error: selected processor does not support `vld1.32 {q0},[r1]!' in ARM mode
{standard input}:71: Error: selected FPU does not support instruction -- `vcvt.s32.f32 q0,q0,#31'
{standard input}:72: Error: selected processor does not support `vqrshrn.s32 d0,q0,#16' in ARM mode
{standard input}:74: Error: selected processor does not support `vst1.16 {d0},[r2]!' in ARM mode
Makefile:8668: recipe for target 'pulsecore/libpulsecore_sconv_neon_la-sconv_neon.lo' failed
To fix this tell PulseAudio explicitly when to use the NEON ASM and when
not to.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
- Add domain_forward to permit designated domains to forward instead
of recurse as listed in resolve.conf.auto from DHCP WAN client
- Update rebind_protection and add rebind_interface to protect IP6
GLA locally just like RFC 1918 protection
- Rename trigger to trigger_interface with backwards compatability
- Update odhcpd script for efficiency handling many clients
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
We need always three of the firewall mask value for
* default routing table
* blackhole
* unreachable
the other will be used for the interfaces.
* If we have set the mmx_mask to max 0xFF00 (8 bit set) we could use max 252
interfaces.
* If we have set the mmx_mask to min 0x0E00 (3 bit set) we could use max 4
interfaces.
Only the ones are counting from the firewall mask value.
Minimal three firewall mask bit vaules must be set.
Maximal eight firewall mask bit vaules could be set.
Table overview mmx_mask value bits vs. max interfaces
mmx_mask value bits set 1 -> not usefull
mmx_mask value bits set 2 -> not usefull
mmx_mask value bits set 3 -> 4 Interfaces (mask example 0x0E)
mmx_mask value bits set 4 -> 12 Interfaces
mmx_mask value bits set 5 -> 28 Interfaces
mmx_mask value bits set 6 -> 60 Interfaces
mmx_mask value bits set 7 -> 124 Interfaces
mmx_mask value bits set 8 -> 252 Interfaces (mask example 0xFF)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Add a new ACTIONs:
* connected ACTION is called once if mwan3track reach all configured track_ips
* disconnected ACTION is called once if mwan3track is unable to reach the track_ips
The connected/disconnected will called only by mwan3track in opposite
the ACTIONs ifup/ifdown will also be called by netifd.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
f056af0 Fix bug: double free when execute a command timeout
69260b6 Fix bug: Error class did not match the server
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
The code assumes pre-C99 inlining. This causes issues with GCC7 which assumes C11. Add std=gnu89 to restore proper behavior.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Changes since 2.8.2 as recorded in NEWS-2.8.2
- NSH implementation now conforms to latest draft (draft-ietf-sfc-nsh-28).
- Bug fixes
0006-adapt-ovs-scripts.patch was splited into two separate patches as
the original patch does not apply against 2.8.2 anymore. Other patches
are just re-numbered without actual function change
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Report https://github.com/openwrt/packages/issues/5638
It was mentioned that this causes build failures on Mac OS X.
The default behavior [in the setup.py script] is to check whether
`--with-system-ffi` is present in the CONFIG_ARGS env var.
However that back-fires a bit when `--with-system-ffi=no`, because the
condition `not '--with-system-ffi' in sysconfig.get_config_var("CONFIG_ARGS")`
evaluates to true.
This is a small bug in the `setup.py` script, but it looks like the
easiest/cleanest way to address it on our end is to just remove it entirely
from the HOST_CONFIGURE_ARGS.
At least that's how it looks like when testing on a Linux machine.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This change was introduced in commit 1c54e2b0fb to address build
issues on Ubuntu 12.04.
However it was reported to cause issues on Mac OS X.
Report: https://github.com/openwrt/packages/issues/5310
It was also reported that removing this on MacOS X fixes the issue.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
From the package description:
PageKite is a system for running publicly visible servers (generally
web servers) on machines without a direct connection to the Internet,
such as mobile devices or computers behind restrictive firewalls.
PageKite works around NAT, firewalls and IP-address limitations by
using a combination of tunnels and reverse proxies.
This package provides an implementation of the PageKite Protocol in C,
optimized for high-performance or embedded applications.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
Vincent Riou
Daniel Golle
Ted Hess
Rosen Penev
Dirk Brenken
Eric Luehrsen
Hannu Nyman
tripolar
Jianhui Zhao
Sebastian Kemper
Peter Wagner
Florian Eckert
Alexander Ryzhov
Paul Wassi
Alexander Couzens
Yousong Zhou
Alexandru Ardelean
Karl Palsson