net/mwan3: deviate max interface value from mmx_mask value

We need always three of the firewall mask value for
* default routing table
* blackhole
* unreachable
the other will be used for the interfaces.

* If we have set the mmx_mask to max 0xFF00 (8 bit set) we could use max 252
  interfaces.
* If we have set the mmx_mask to min 0x0E00 (3 bit set) we could use max 4
  interfaces.

Only the ones are counting from the firewall mask value.
Minimal three firewall mask bit vaules must be set.
Maximal eight firewall mask bit vaules could be set.

Table overview mmx_mask value bits vs. max interfaces

mmx_mask value bits set 1 -> not usefull
mmx_mask value bits set 2 -> not usefull
mmx_mask value bits set 3 ->   4 Interfaces (mask example 0x0E)
mmx_mask value bits set 4 ->  12 Interfaces
mmx_mask value bits set 5 ->  28 Interfaces
mmx_mask value bits set 6 ->  60 Interfaces
mmx_mask value bits set 7 -> 124 Interfaces
mmx_mask value bits set 8 -> 252 Interfaces (mask example 0xFF)

Signed-off-by: Florian Eckert <fe@dev.tdt.de>

net/mwan3/files/lib/mwan3/mwan3.sh

@@ -10,6 +10,7 @@ CONNTRACK_FILE="/proc/net/nf_conntrack"
 
 MWAN3_STATUS_DIR="/var/run/mwan3"
 MWAN3TRACK_STATUS_DIR="/var/run/mwan3track"
+MWAN3_INTERFACE_MAX=""
 DEFAULT_LOWEST_METRIC=256
 MMX_MASK=""
 MMX_DEFAULT=""
@@ -65,11 +66,18 @@ mwan3_init()
 	# mwan3's MARKing mask (at least 3 bits should be set)
 	if [ -e "${MWAN3_STATUS_DIR}/mmx_mask" ]; then
 		MMX_MASK=$(cat "${MWAN3_STATUS_DIR}/mmx_mask")
+		MWAN3_INTERFACE_MAX=$(uci_get_state mwan3 globals iface_max)
 	else
 		config_load mwan3
 		config_get MMX_MASK globals mmx_mask '0xff00'
 		echo "$MMX_MASK" > "${MWAN3_STATUS_DIR}/mmx_mask"
 		$LOG notice "Using firewall mask ${MMX_MASK}"
+
+		bitcnt=$(mwan3_count_one_bits MMX_MASK)
+		mmdefault=$(((1<<bitcnt)-1))
+		MWAN3_INTERFACE_MAX=$(($mmdefault-3))
+		uci_toggle_state mwan3 globals iface_max "$MWAN3_INTERFACE_MAX"
+		$LOG notice "Max interface count is ${MWAN3_INTERFACE_MAX}"
 	fi
 
 	# mark mask constants

net/mwan3/files/usr/sbin/mwan3

@@ -145,7 +145,7 @@ stop()
 
 	for IP in "$IP4" "$IP6"; do
 
-		for route in $($IP route list table all | sed 's/.*table \([^ ]*\) .*/\1/' |  awk '{print $1}' | awk '{for(i=1;i<=NF;i++) if($i+0>0) if($i+0<255) {print;break}}'); do
+		for route in $(seq 1 $MWAN3_INTERFACE_MAX); do
 			$IP route flush table $route &> /dev/null
 		done