* Pin range scope vars
* Don't disable scopelint
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=scopelint
Contributes to #3262
* Remove unnecessary type conversions
* Consolidate repeated strings into consts
* Clothe return statements
* Update blockchain/v1/reactor_fsm_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=unconvert
golangci-lint run --no-config --disable-all=true --enable=goconst
golangci-lint run --no-config --disable-all=true --enable=nakedret
Contributes to #3262
* Add test for bcBlockRequestMessage ValidateBasic method
* Add test for bcNoBlockResponseMessage ValidateBasic method
* Add test for bcStatusRequestMessage ValidateBasic method
* Add test for bcStatusResponseMessage ValidateBasic method
* Add blockchain v1 reactor ValidateBasic tests
* Add test for NewRoundStepMessage ValidateBasic method
* Add test for NewValidBlockMessage ValidateBasic method
* Test BlockParts Size
* Import cmn package
* Add test for ProposalPOLMessage ValidateBasic method
* Add test for BlockPartMessage ValidateBasic method
* Add test for HasVoteMessage ValidateBasic method
* Add test for VoteSetMaj23Message ValidateBasic method
* Add test for VoteSetBitsMessage ValidateBasic method
* Fix linter errors
* Improve readability
* Add test for BaseConfig ValidateBasic method
* Add test for RPCConfig ValidateBasic method
* Add test for P2PConfig ValidateBasic method
* Add test for MempoolConfig ValidateBasic method
* Add test for FastSyncConfig ValidateBasic method
* Add test for ConsensusConfig ValidateBasic method
* Add test for InstrumentationConfig ValidateBasic method
* Add test for BlockID ValidateBasic method
* Add test for SignedHeader ValidateBasic method
* Add test for MockGoodEvidence and MockBadEvidence ValidateBasic methods
* Remove debug logging
Co-Authored-By: Marko <marbar3778@yahoo.com>
* Update MempoolConfig field
* Test a single struct field at a time, for maintainability
Fixes#2740
+ use `trySend` the replicate peer sending
+ expose `next()` as a chan of events as output
+ expose `final()` as a chan of error, for the final error
+ add `ready()` as chan struct when routine is ready
* (1/2) of replace errors.go with github.com/pkg/errors
ref #3862
- step one in removing instances of errors.go in favor of github.com/pkg/errors
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* gofmt
* add in /store
+ ensure that we stop accepting messages once `stop` has been called
to avoid the case in which we attempt to write to a channel which
has already been closed
+ `routine.send` returns false when routine is not running
+ this will prevent panics sending to channels which have been
closed
+ Make output channels routine specific removing the risk of someone
writting to a channel which was closed by another touine.
+ consistency changes between the routines and the demuxer
* Add Schedule:
+ The schedule is a data structure used to determine the optimal
schedule of requests to the optimal set of peers in order to perform
fast-sync as fast and efficiently as possible.
* Add some doc strings
* fix golangci
* Add Schedule:
+ The schedule is a data structure used to determine the optimal
schedule of requests to the optimal set of peers in order to perform
fast-sync as fast and efficiently as possible.
* Add some doc strings
* remove globals from tests
cleanup to add linter
grpc change:
https://godoc.org/google.golang.org/grpc#WithContextDialerhttps://godoc.org/google.golang.org/grpc#WithDialer
grpc/grpc-go#2627
prometheous change:
due to UninstrumentedHandler, being deprecated in the future
empty branch = empty if or else statement
didn't delete them entirely but commented
couldn't find a reason to have them
could not replicate the issue #3406
but if want to keep it commented then we should comment out the if statement as well
* Renamed wire.go to codec.go
- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* ide error
* rename amino.go to codec.go
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
cleanup to add linter
grpc change:
https://godoc.org/google.golang.org/grpc#WithContextDialerhttps://godoc.org/google.golang.org/grpc#WithDialer
grpc/grpc-go#2627
prometheous change:
due to UninstrumentedHandler, being deprecated in the future
empty branch = empty if or else statement
didn't delete them entirely but commented
couldn't find a reason to have them
could not replicate the issue #3406
but if want to keep it commented then we should comment out the if statement as well
* Renamed wire.go to codec.go
- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* ide error
* rename amino.go to codec.go
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* Refactor signature of Application.CheckTx
* Refactor signature of Application.DeliverTx
* Refactor example variable names for clarity and consistency
* Rename method variables for consistency
* Rename method variables for consistency
* add a changelog entry
* update docs
## PR
This PR introduces a fundamental breaking change to the structure of ABCI response and tx tags and the way they're processed. Namely, the SDK can support more complex and aggregated events for distribution and slashing. In addition, block responses can include duplicate keys in events.
Implement new Event type. An event has a type and a list of KV pairs (ie. list-of-lists). Typical events may look like:
"rewards": [{"amount": "5000uatom", "validator": "...", "recipient": "..."}]
"sender": [{"address": "...", "balance": "100uatom"}]
The events are indexed by {even.type}.{even.attribute[i].key}/.... In this case a client would subscribe or query for rewards.recipient='...'
ABCI response types and related types now include Events []Event instead of Tags []cmn.KVPair.
PubSub logic now publishes/matches against map[string][]string instead of map[string]string to support duplicate keys in response events (from #1385). A match is successful if the value is found in the slice of strings.
closes: #1859closes: #2905
## Commits:
* Implement Event ABCI type and updates responses to use events
* Update messages_test.go
* Update kvstore.go
* Update event_bus.go
* Update subscription.go
* Update pubsub.go
* Update kvstore.go
* Update query logic to handle slice of strings in events
* Update Empty#Matches and unit tests
* Update pubsub logic
* Update EventBus#Publish
* Update kv tx indexer
* Update godocs
* Update ResultEvent to use slice of strings; update RPC
* Update more tests
* Update abci.md
* Check for key in validateAndStringifyEvents
* Fix KV indexer to skip empty keys
* Fix linting errors
* Update CHANGELOG_PENDING.md
* Update docs/spec/abci/abci.md
Co-Authored-By: Federico Kunze <31522760+fedekunze@users.noreply.github.com>
* Update abci/types/types.proto
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update docs/spec/abci/abci.md
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update libs/pubsub/query/query.go
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update match function to match if ANY value matches
* Implement TestSubscribeDuplicateKeys
* Update TestMatches to include multi-key test cases
* Update events.go
* Update Query interface godoc
* Update match godoc
* Add godoc for matchValue
* DRY-up tx indexing
* Return error from PublishWithEvents in EventBus#Publish
* Update PublishEventNewBlockHeader to return an error
* Fix build
* Update events doc in ABCI
* Update ABCI events godoc
* Implement TestEventBusPublishEventTxDuplicateKeys
* Update TestSubscribeDuplicateKeys to be table-driven
* Remove mod file
* Remove markdown from events godoc
* Implement TestTxSearchDeprecatedIndexing test
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
* Remove deprecated PanicXXX functions from codebase
As per discussion over
[here](https://github.com/tendermint/tendermint/pull/3456#discussion_r278423492),
we need to remove these `PanicXXX` functions and eliminate our
dependence on them. In this PR, each and every `PanicXXX` function call
is replaced with a simple `panic` call.
* add a changelog entry
Fixes#3457
The topic of the issue is that : write a BlockRequest int requestsCh channel will create an timer at the same time that stop the peer 15s later if no block have been received . But pop a BlockRequest from requestsCh and send it out may delay more than 15s later. So that the peer will be stopped for error("send nothing to us").
Extracting requestsCh into its own goroutine can make sure that every BlockRequest been handled timely.
Instead of the requestsCh handling, we should probably pull the didProcessCh handling in a separate go routine since this is the one "starving" the other channel handlers. I believe the way it is right now, we still have issues with high delays in errorsCh handling that might cause sending requests to invalid/ disconnected peers.
When remove peer, block pool simple remove bpPeer,
but do not stop timer, that cause stopError for recorrected
peers. Stop timer when remove from pool.
Marko
Sean Braithwaite
Phil Salant
Anca Zamfir
Thane Thomson
Alexander Bezobchuk
Anton Kaliaev
JamesRay
zjubfd
Ismail Khoffi