## Description
Check block protocol version in header validate basic.
I tried searching for where we check the P2P protocol version but was unable to find it. When we check compatibility with a node we check we both have the same block protocol and are on the same network, but we do not check if we are on the same P2P protocol. It makes sense if there is a handshake change because we would not be able to establish a secure connection, but a p2p protocol version bump may be because of a p2p message change, which would go unnoticed until that message is sent over the wire. Is this purposeful?
Closes: #4790
## Description
partially cleanup in preparation for errcheck
i ignored a bunch of defer errors in tests but with the update to go 1.14 we can use `t.Cleanup(func() { if err := <>; err != nil {..}}` to cover those errors, I will do this in pr number two of enabling errcheck.
ref #5059
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
Followup from #4588. Allow the first `SaveBlock()` call in an empty block store to be at any height, to start from a truncated block history. Subsequent `SaveBlock()` calls must be for contiguous blocks.
______
For contributor use:
- [x] Wrote tests
- [ ] ~Updated CHANGELOG_PENDING.md~
- [x] Linked to Github issue with discussion and accepted design OR link to spec that describes this work.
- [x] Updated relevant documentation (`docs/`) and code comments
- [x] Re-reviewed `Files changed` in the Github PR explorer
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* dep: update tm-db to 0.4.0
- update 0.4.0 as it is a breaking change and cannot be handled by depndabot
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more work towards error handling
* error and emtpy bytes handling
* work on tests
* add changelog entry, change some error handling
* address some pr comments
* panic in a few more places
* move error higher up
* redo some error handling
* fix some bz == nil to len(bz) == 0
* change statebytes
* types: change `Commit` to consist of just signatures
These are final changes towards removing votes from commit and leaving
only signatures (see ADR-25)
Fixes#1648
* bring back TestCommitToVoteSetWithVotesForAnotherBlockOrNilBlock
+ add absent flag to Vote to indicate that it's for another block
* encode nil votes as CommitSig with BlockIDFlagAbsent
+ make Commit#Precommits array of non-pointers
because precommit will never be nil
* add NewCommitSigAbsent and Absent() funcs
* uncomment validation in CommitSig#ValidateBasic
* add comments to ValidatorSet funcs
* add a changelog entry
* break instead of continue
continue does not make sense in these cases
* types: rename Commit#Precommits to Signatures
* swagger: fix /commit response
* swagger: change block_id_flag type
* fix merge conflicts
* Removal of TotalTx & NumTx
- Removed totalTx and numTx
closes#2521
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* abci proto changes
* proto number fix
* txfilter_test fix
* comments on PR
* further changes
* bring back metrics
* fix indexer
* fix TestBlockMaxDataBytes and TestBlockMaxDataBytesUnknownEvidence
* indexer service back to header
* statistics.go fix
* fix ci
* listen for blocks, not headers
to be able to record txs throughput
* fix TestNetworkNewBlock
* fix tests
* fix tests in types package
* fixes after Anton's review
* fix tests
* bring back `consensus_total_txs` metric
I mistakenly thought it was removed.
* improve changelog
* remove LastBlockTotalTx from state
* docs: remove getNumTxs from BeginBlock Java example
* Pin range scope vars
* Don't disable scopelint
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=scopelint
Contributes to #3262
* (1/2) of replace errors.go with github.com/pkg/errors
ref #3862
- step one in removing instances of errors.go in favor of github.com/pkg/errors
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* gofmt
* add in /store
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* changelog: use issue number instead of PR number
* follow up to #3291
- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()
* cmd/show_validator: wrap err to make it more clear
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* types.NewCommit
* use types.NewCommit everywhere
* fix log in unsafe_reset
* memoize height and round in constructor
* notes about deprecating toVote
* bring back memoizeHeightRound
* types: memoize height/round in commit instead of first vote
* types: commit.ValidateBasic in VerifyCommit
* types: new CommitSig alias for Vote
In preparation for reducing the redundancy in Commits, we introduce the
CommitSig as an alias for Vote. This is non-breaking on the protocol,
and minor breaking on the Go API, as Commit now contains a list of
CommitSig instead of Vote.
* remove dependence on ToVote
* update some comments
* fix tests
* fix tests
* fixes from review
* Begin simple merkle compatibility PR
* Fix query_test
* Use trillian test vectors
* Change the split point per RFC 6962
* update spec
* refactor innerhash to match spec
* Update changelog
* Address @liamsi's comments
* Write the comment requested by @liamsi
Add tests to test store, to the fullest reasonable extent for
paths that can taken by input arguments altering internal behavior,
as well as by mutating content in the DB.
Erik Grinaker
Marko
Anton Kaliaev
Phil Salant
Anca Zamfir
Alessio Treglia
Ethan Buchman
Dev Ojha
Zarko Milosevic
Zach Ramsay
Jae Kwon
Liamsi
Adrian Brink
Emmanuel Odeke