Executed a local network using simapp and looked for logs that seemed superfluous. This isn't by any means an exhaustive grooming, but should drastically help legibility of logs.


ref: #5912

Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>

Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>

@p4u from vocdoni.io reported that the mempool might behave incorrectly under a
high load. The consequences can range from pauses between blocks to the peers
disconnecting from this node.

My current theory is that the flowrate lib we're using to control flow
(multiplex over a single TCP connection) was not designed w/ large blobs
(1MB batch of txs) in mind.

I've tried decreasing the Mempool reactor priority, but that did not
have any visible effect. What actually worked is adding a time.Sleep
into mempool.Reactor#broadcastTxRoutine after an each successful send ==
manual control flow of sort.

As a temporary remedy (until the mempool package
is refactored), the max-batch-bytes was disabled. Transactions will be sent
one by one without batching

Closes #5796

When set to true, an invalid transaction will be kept in the cache (this may help some applications to protect against spam).

NOTE: this is a temporary config option. The more correct solution would be to add a TTL to each transaction (i.e. CheckTx may return a TTL in ResponseCheckTx).

Closes: #5751

time_iota_ms is intended to ensure that an honest validator always generates timestamps 
with time increasing monotonically. For this purpose, it always suffices to have this parameter
set to `1ms`. Allowing users to choose different numbers increases bug surface area.
Thus the code now ignores the user provided time_iota_ms parameter (marking it as unused), 
and uses 1ms internally.

The MTU (Maximum Transmission Unit) for Ethernet is 1500 bytes.
The IP header and the TCP header take up 20 bytes each at least (unless
optional header fields are used) and thus the max for (non-Jumbo frame)
Ethernet is 1500 - 20 -20 = 1460
Source: https://stackoverflow.com/a/3074427/820520

Removes `p2p.FuzzedConnection`, since it does not appear to be in use. While these sorts of test wrappers may be useful, they should be injected directly instead of bleeding through into the main application configuration. We'll implement something similar if and when necessary, for the new P2P abstractions in #2067.

Reduces the state sync discovery time from 20 to 15 seconds, and makes it configurable.

Closes #625

also, document consensus parameters.
https://forum.cosmos.network/t/consensus-timeouts-explained/1421

Closes #4489

* config: rename prof_laddr to pprof_laddr and move it to rpc

also, remove `/unsafe_start_cpu_profiler`, `/unsafe_stop_cpu_profiler`
and `/unsafe_write_heap_profile` in favor of pprof server functionality.

Closes #5303

* update changelog

* log start

## Description

make state sync trust period consistent with the default in the `tendermint light` cmd

Closes: #XXX

Implementation spec of Double Signing Risk Reduction [ADR-51](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-051-double-signing-risk-reduction.md) by B-Harvest
- Add `DoubleSignCheckHeight` config variable to ConsensusConfig for "How many blocks looks back to check existence of the node's consensus votes when before joining consensus"
- Add `consensus.double_sign_check_height` to `config.toml` and `tendermint node` as flag for set `DoubleSignCheckHeight`
- Set default `consensus.double_sign_check_height` to `0`  ( it could be adjustable in this PR, disable when 0  )

Refs

- [ADR-51](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-051-double-signing-risk-reduction.md)
- [https://github.com/tendermint/tendermint/issues/4059](https://github.com/tendermint/tendermint/issues/4059)
- [https://github.com/tendermint/tendermint/pull/4262](https://github.com/tendermint/tendermint/pull/4262)

* db: add support for badgerdb

* add badgerdb comment for Config.DBBackend

Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>

## Description

left over variable

Fixes #828. Adds state sync, as outlined in [ADR-053](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-053-state-sync-prototype.md). See related PRs in Cosmos SDK (https://github.com/cosmos/cosmos-sdk/pull/5803) and Gaia (https://github.com/cosmos/gaia/pull/327).

This is split out of the previous PR #4645, and branched off of the ABCI interface in #4704. 

* Adds a new P2P reactor which exchanges snapshots with peers, and bootstraps an empty local node from remote snapshots when requested.

* Adds a new configuration section `[statesync]` that enables state sync and configures the light client. Also enables `statesync:info` logging by default.

* Integrates state sync into node startup. Does not support the v2 blockchain reactor, since it needs some reorganization to defer startup.

The old format was deprecated in v0.28. It's time we remove it.

Closes #3831

The support for rocksdb was added a while back in
https://github.com/tendermint/tm-db/pull/12. This commit merely updates
the documentation.

* Rename Tag(s) to Event(s)

- tag was replaced with event, but in some places it still mentions tag, would be easier to understand if we tried to replace it with event to not confuse people.

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* more  changes from tag -> event

* rename events to compositeKeys and keys

* Apply suggestions from code review

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* add minor documentation on how composite keys are constructed

* rename eventkey to compositekey

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* add changelog entry & add info to regenerate confid to changelog entry

implementation spec of Improved Trusted Peering ADR-050 by B-Harvest

- add unconditional_peer_ids and persistent_peers_max_dial_period to config
- add unconditionalPeerIDs map to Switch struct

default config value of persistent_peers_max_dial_period is 0s(disabled)

Refs #4072, #4053

* Fix long line errors in abci, crypto, and libs packages

* Fix long lines in p2p and rpc packages

* Fix long lines in abci, state, and tools packages

* Fix long lines in behaviour and blockchain packages

* Fix long lines in cmd and config packages

* Begin fixing long lines in consensus package

* Finish fixing long lines in consensus package

* Add lll exclusion for lines containing URLs

* Fix long lines in crypto package

* Fix long lines in evidence package

* Fix long lines in mempool and node packages

* Fix long lines in libs package

* Fix long lines in lite package

* Fix new long line in node package

* Fix long lines in p2p package

* Ignore gocritic warning

* Fix long lines in privval package

* Fix long lines in rpc package

* Fix long lines in scripts package

* Fix long lines in state package

* Fix long lines in tools package

* Fix long lines in types package

* Enable lll linter

* New lint version upgrade

- linter was upgraded

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* enable-a;; is deprecated

* minor change

* another try

* some more changes

* some more changes

* reenable prealloc

* add version till bot is fixed

* update gogo/protobuf version from v1.2.1 to v1.3.0

Also errcheck from v1.1.0 to v1.2.0

See full diff in
- https://github.com/gogo/protobuf/compare/v1.2.1...v1.3.0
- https://github.com/kisielk/errcheck/compare/v1.1.0...v1.2.0

Changelog:

Tested versions:

go 1.12.9
protoc 3.7.1
Improvements:

    plugin/stringer - Handle repeated and/or nullable types a bit better now.
    plugin/size - Remove the loop in sovXXX by using bit twiddling.
        Thanks: https://github.com/apelisse
    plugin/marshalto - Implemented a reverse marshal strategy which allows for faster marshalling. This now avoids a recursive (and repeated) call to Size().
        Thanks: https://github.com/apelisse
    plugin/compare - Added support for for oneof types.

Bug fixes:

    protoc-gen-gogo/generator - Fix assignment to entry in nil map.
        Thanks: https://github.com/tgulacsi
    protoc-gen-gogo/generator - Allows plugins to call RecordTypeUse without panicking.
        Thanks: https://github.com/fedenusy
    proto/extensions - Fixed set extension regression. We did not clear the extensions before setting.
    io/uint32 - fix uint32reader bug that causes ReadMsg to recreate buffer when lengths are the same.
        Thanks: https://github.com/SebiSujar
    proto/table_merge: Fix merge of non-nullable slices.
        Thanks: https://github.com/euroelessar

Upstream commits:

    merged in golang/protobuf commit 318d17de72 - Add UnimplementedServer for server interface
    merged in golang/protobuf commit b85cd75de7 - protoc-gen-go/grpc: inline errUnimplemented function
    merged in golang/protobuf commit d3c38a4eb4 - protoc-gen-go/grpc: use status and code packages only if needed
    merged in golang/protobuf commit e91709a02e - fix indentation in jsonpb with Any messages
    merged in golang/protobuf commit 8d0c54c124 - protoc-gen-go: generate XXX_OneofWrappers instead of XXX_OneofFuncs

Misc:

    extensions.md - Markdown update.
        Thanks: https://github.com/TennyZhuang
    Readme.md - Added user.
    go/protoc update - Updated to go1.12.x and protoc 3.7.1
    Makefile update - fix go vet shadow tool reference
    test/mixbench - Update mixbench tool. Expose runnable benchmarks via flags.

* update certstrap

* update golangci-lint from v1.13.2 to v1.17.1

* update gox as well

* test

* comment out golangci temporary

* comment out go-deadlock deps

Fix #3868 (comment)

Commits:

* mempool: make `max_tx_bytes` configurable instead of `max_msg_bytes`

* update CHANGELOG_PENDING

* apply suggestions from code review

* go routines in blockchain reactor

* Added reference to the go routine diagram

* Initial commit

* cleanup

* Undo testing_logger change, committed by mistake

* Fix the test loggers

* pulled some fsm code into pool.go

* added pool tests

* changes to the design

added block requests under peer

moved the request trigger in the reactor poolRoutine, triggered now by a ticker

in general moved everything required for making block requests smarter in the poolRoutine

added a simple map of heights to keep track of what will need to be requested next

added a few more tests

* send errors to FSM in a different channel than blocks

send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests

* more pool tests

* lint errors

* more tests

* more tests

* switch fast sync to new implementation

* fixed data race in tests

* cleanup

* finished fsm tests

* address golangci comments :)

* address golangci comments :)

* Added timeout on next block needed to advance

* updating docs and cleanup

* fix issue in test from previous cleanup

* cleanup

* Added termination scenarios, tests and more cleanup

* small fixes to adr, comments and cleanup

* Fix bug in sendRequest()

If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.

While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.

* remove bpPeer's didTimeout field

* Use distinct err codes for peer timeout and FSM timeouts

* Don't allow peers to update with lower height

* review comments from Ethan and Zarko

* some cleanup, renaming, comments

* Move block execution in separate goroutine

* Remove pool's numPending

* review comments

* fix lint, remove old blockchain reactor and duplicates in fsm tests

* small reorg around peer after review comments

* add the reactor spec

* verify block only once

* review comments

* change to int for max number of pending requests

* cleanup and godoc

* Add configuration flag fast sync version

* golangci fixes

* fix config template

* move both reactor versions under blockchain

* cleanup, golint, renaming stuff

* updated documentation, fixed more golint warnings

* integrate with behavior package

* sync with master

* gofmt

* add changelog_pending entry

* move to improvments

* suggestion to changelog entry

* mempool: make max_msg_bytes configurable

* apply suggestions from code review

* update changelog pending

* apply suggestions from code review again

* rpc: make max_body_bytes and max_header_bytes configurable

* update changelog pending

* Make RPC bind to localhost by default

* Add CHANGELOG_PENDING entry

* Allow testnet command to override RPC listen address

* Update localnet test to bind RPC to 0.0.0.0

* Update p2p test to bind RPC to 0.0.0.0

* Remove rpc-laddr parameter

* Update localnet to use config template with RPC listen address override

* Use config template override method for RPC listen address

* Build config template into localnode image

* Build localnode image locally before starting localnet

* Move testnet config overrides into templates

* Revert deletion of config overrides

* Remove extraneous config parameter overrides

* libs/db: conditional compilation

For cleveldb: go build -tags cleveldb
For boltdb: go build -tags boltdb

Fixes #3611

* document db_backend param better

* remove deprecated LevelDBBackend

* update changelog

* add missing lines

* add new line

* fix TestRemoteDB

* add a line about boltdb tag

* Revert "remove deprecated LevelDBBackend"

This reverts commit 1aa85453f7.

* make PR non breaking

* change DEPRECATED label format

https://stackoverflow.com/a/36360323/820520

Refs #3419

* Make sure config.TimeoutBroadcastTxCommit < rpcserver.WriteTimeout()

* remove redundant comment

* libs/rpc/http_server: move Read/WriteTimeout into Config

* increase defaults for read/write timeouts

Based on this article
https://www.digitalocean.com/community/tutorials/how-to-optimize-nginx-configuration

* WriteTimeout should be larger than TimeoutBroadcastTxCommit

* set a deadline for subscribing to txs

* extract duration into const

* add two changelog entries

* Update CHANGELOG_PENDING.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* Update CHANGELOG_PENDING.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* 12 -> 10

* changelog

* changelog

* limit number of /subscribe clients and queries per client

Add the following config variables (under [rpc] section):
  * max_subscription_clients
  * max_subscriptions_per_client
  * timeout_broadcast_tx_commit

Fixes #2826

new HTTPClient interface for subscriptions

finalize HTTPClient events interface

remove EventSubscriber

fix data race

```
WARNING: DATA RACE
Read at 0x00c000a36060 by goroutine 129:
  github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1()
      /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0

Previous write at 0x00c000a36060 by goroutine 132:
  github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
      /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0
  github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
      /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
  github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
      /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
  testing.tRunner()
      /usr/local/go/src/testing/testing.go:827 +0x162

Goroutine 129 (running) created at:
  github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
      /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7
  github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
      /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
  github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
      /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
  testing.tRunner()
      /usr/local/go/src/testing/testing.go:827 +0x162

Goroutine 132 (running) created at:
  testing.(*T).Run()
      /usr/local/go/src/testing/testing.go:878 +0x659
  github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync()
      /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186
  testing.tRunner()
      /usr/local/go/src/testing/testing.go:827 +0x162
==================
```

lite client works (tested manually)

godoc comments

httpclient: do not close the out channel

use TimeoutBroadcastTxCommit

no timeout for unsubscribe

but 1s Local (5s HTTP) timeout for resubscribe

format code

change Subscribe#out cap to 1

and replace config vars with RPCConfig

TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout

rpc: Context as first parameter to all functions

reformat code

fixes after my own review

fixes after Ethan's review

add test stubs

fix config.toml

* fixes after manual testing

- rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes
Tendermint resources (pubsub)
- rpc: better error in Subscribe and BroadcastTxCommit
- HTTPClient: do not resubscribe if err = ErrAlreadySubscribed

* fixes after Ismail's review

* Update rpc/grpc/grpc_test.go

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* make BlockTimeIota a consensus parameter, not a locally configurable option

Refs #2920

* make TimeIota int64 ms

Refs #2920

* update Gopkg.toml

* fixes after Ethan's review

* fix TestRemoteSignerProposalSigningFailed

* update changelog

* bound mempool memory usage

Closes #3079

* rename SizeBytes to TxsTotalBytes

and other small fixes after Zarko's review

* rename MaxBytes to MaxTxsTotalBytes

* make ErrMempoolIsFull more informative

* expose mempool's txs_total_bytes via RPC

* test full response

* fixes after Ethan's review

* config: rename mempool.size to mempool.max_txs

https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004

* test more cases

https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532

* simplify test

* Revert "config: rename mempool.size to mempool.max_txs"

This reverts commit 39bfa36961.

* rename count back to n_txs

to make a change non-breaking

* rename max_txs_total_bytes to max_txs_bytes

* format code

* fix TestWALPeriodicSync

The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.

* Apply suggestions from code review

* split immutable and mutable parts of priv_validator.json

* fix bugs

* minor changes

* retrig test

* delete scripts/wire2amino.go

* fix test

* fixes from review

* privval: remove mtx

* rearrange priv_validator.go

* upgrade path

* write tests for the upgrade

* fix for unsafe_reset_all

* add test

* add reset test

* config: cors options are arrays of strings, not strings

Fixes #2980

* docs: update tendermint-core/configuration.html page

* set allow_duplicate_ip to false

* in `tendermint testnet`, set allow_duplicate_ip to true

Refs #2712

* fixes after Ismail's review

* config: cors options are arrays of strings, not strings

Fixes #2980

* docs: update tendermint-core/configuration.html page

* set allow_duplicate_ip to false

* in `tendermint testnet`, set allow_duplicate_ip to true

Refs #2712

* fixes after Ismail's review

* Revert "set allow_duplicate_ip to false"

This reverts commit 24c1094ebc.

* Introduce a structured logging option

* rename StructuredLog to LogFormat

* add changelog entry

* move log_format under log_level

* only invoke InitWAL/CloseWAL if WalPath is not empty

Closes #2717

* panic if WAL is not initialized when calling CloseWAL

* add a changelog entry

* Fix termination issues and improve tests

* Improve formatting and tests based on reviewer feedback

* specify time unit for FlushThrottleTimeout in TestP2PConfig
Refs #2555
* [tm-bench] refactor code
https://github.com/tendermint/tendermint/pull/2405#pullrequestreview-157166387