Closes: #4537
Uses SignedHeaderBefore to find header before unverified header and then bisection to verify the header. Only when header is between first and last trusted header height else if before the first trusted header height then regular backwards verification is used.
- defined what variables needed to be changed in the `config.toml` in order to run a validator.
- Briefly explained how a sentry node archtecture should look
- add section explaing importance of key secruity
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
Closes: #4546
The algorithm uses an array to store the headers and validators and populates it at every bisection (which is an unsuccessful verification). When a successful verification finally occurs it updates the new trusted header, trims that header from the cache (the array) and sets the depth pointer back to 0. Instead of retrieving new headers it will use the cached headers, incrementing in depth until it reaches the end of the cache which by then it will start to retrieve new headers from the provider.
Mathematically, this method doesn't properly bisect after the first round but it will always choose a pivot header that is within 1/8th of the upper header's height. I.e. if we are trying to jump 128 headers, the maximum offset from bisection height (64) is 64 + 16(128/8) = 80, therefore a better heuristic would be to obtain the new pivot header height as the middle of these two numbers which would therefore mean to multiply it by 9/16ths instead of 1/2 (sorry this might be a bit more complicated in writing but I can try better explain if someone is interested). Therefore I would also, upon consensus, propose that we change the pivot height to 9/16th's of the previous height
* update theme
* Update version
* Updated Questions section in the footer
* Remove links to Riot chat
* Typo
* Add Discord link
* Update docs theme to the latest version
* Use docs-staging branch for staging website
* Resolve merge conflicts
* Update version
* Add google analytics
Co-authored-by: Marko <marbar3778@yahoo.com>
* adr: crypto encoding for proto work
- this adr is meant to help with deciding on how to move forward with keys in tendermint.
* minor change
* fix gomod
* add a third option
* fix spelling
* add first part of descision
* breakdown keys and where they are used
* add some wording
* minor wording fix
* question
* change proto messages
* minor update
* undo go.mod changes
* add a few things based on comemnts
* push, push it real good
* minor explanation on interface type
* touch up
error itself is not enough since it only signals if there were any
errors. Either (types.SignedHeader) or (success bool) is needed to
indicate the status of the operation. Returning a header is optimal
since most of the clients will want to get a newly verified header
anyway.
We first introduced auto-update as a separate struct AutoClient, which
was wrapping Client and calling Update periodically.
// AutoClient can auto update itself by fetching headers every N seconds.
type AutoClient struct {
base *Client
updatePeriod time.Duration
quit chan struct{}
trustedHeaders chan *types.SignedHeader
errs chan error
}
// NewAutoClient creates a new client and starts a polling goroutine.
func NewAutoClient(base *Client, updatePeriod time.Duration) *AutoClient {
c := &AutoClient{
base: base,
updatePeriod: updatePeriod,
quit: make(chan struct{}),
trustedHeaders: make(chan *types.SignedHeader),
errs: make(chan error),
}
go c.autoUpdate()
return c
}
// TrustedHeaders returns a channel onto which new trusted headers are posted.
func (c *AutoClient) TrustedHeaders() <-chan *types.SignedHeader {
return c.trustedHeaders
}
// Err returns a channel onto which errors are posted.
func (c *AutoClient) Errs() <-chan error {
return c.errs
}
// Stop stops the client.
func (c *AutoClient) Stop() {
close(c.quit)
}
func (c *AutoClient) autoUpdate() {
ticker := time.NewTicker(c.updatePeriod)
defer ticker.Stop()
for {
select {
case <-ticker.C:
lastTrustedHeight, err := c.base.LastTrustedHeight()
if err != nil {
c.errs <- err
continue
}
if lastTrustedHeight == -1 {
// no headers yet => wait
continue
}
newTrustedHeader, err := c.base.Update(time.Now())
if err != nil {
c.errs <- err
continue
}
if newTrustedHeader != nil {
c.trustedHeaders <- newTrustedHeader
}
case <-c.quit:
return
}
}
}
Later we merged it into the Client itself with the assumption that most clients will want it.
But now I am not sure. Neither IBC nor cosmos/relayer are using it. It increases complexity (Start/Stop methods).
That said, I think it makes sense to remove it until we see a need for it (until we better understand usage behavior). We can always introduce it later 😅. Maybe in the form of AutoClient.
* lite2: fix tendermint lite sub command
- better logging
- chainID as an argument
- more examples
* one more log msg
* lite2: fire update right away after start
* turn off auto update in verification tests
Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>
closes: #4455
Verifying backwards checks that the trustedHeader hasn't expired both before and after the loop in case of verifying many headers (a longer operation), but not during the loop itself.
TrustedHeader() no longer checks whether the header saved in the store has expired.
Tests have been updated to reflect the changes
## Commits:
* verify headers backwards out of trust period
* removed expiration check in trusted header func
* modified tests to reflect changes
* wrote new tests for backwards verification
* modified TrustedHeader and TrustedValSet functions
* condensed test functions
* condensed test functions further
* fix build error
* update doc
* add comments
* remove unnecessary declaration
* extract latestHeight check into a separate func
Co-authored-by: Callum Waters <cmwaters19@gmail.com>
Before we were storing trustedHeader (height=1) and trustedNextVals
(height=2).
After this change, we will be storing trustedHeader (height=1) and
trustedVals (height=1). This a) simplifies the code b) fixes#4399
inconsistent pairing issue c) gives a relayer access to the current
validator set #4470.
The only downside is more jumps during bisection. If validator set
changes between trustedHeader and the next header (by 2/3 or more), the
light client will be forced to download the next header and check that
2/3+ signed the transition. But we don't expect validator set change too
much and too often, so it's an acceptable compromise.
Closes#4470 and #4399
The work includes the reactor which ties together all the seperate routines involved in the design of the blockchain v2 refactor. This PR replaces #4067 which got far too large and messy after a failed attempt to rebase.
## Commits:
* Blockchainv 2 reactor:
+ I cleaner copy of the work done in #4067 which fell too far behind and was a nightmare to rebase.
+ The work includes the reactor which ties together all the seperate routines involved in the design of the blockchain v2 refactor.
* fixes after merge
* reorder iIO interface methodset
* change iO -> IO
* panic before send nil block
* rename switchToConsensus -> trySwitchToConsensus
* rename tdState -> tmState
* Update blockchain/v2/reactor.go
Co-Authored-By: Bot from GolangCI <42910462+golangcibot@users.noreply.github.com>
* remove peer when it sends a block unsolicited
* check for not ready in markReceived
* fix error
* fix the pcFinished event
* typo fix
* add documentation for processor fields
* simplify time.Since
* try and make the linter happy
* some doc updates
* fix channel diagram
* Update adr-043-blockchain-riri-org.md
* panic on nil switch
* liting fixes
* account for nil block in bBlockResponseMessage
* panic on duplicate block enqueued by processor
* linting
* goimport reactor_test.go
Co-authored-by: Bot from GolangCI <42910462+golangcibot@users.noreply.github.com>
Co-authored-by: Anca Zamfir <ancazamfir@users.noreply.github.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* update theme
* Update version
* Updated Questions section in the footer
* Remove links to Riot chat
* Typo
* Add Discord link
Co-authored-by: Marko <marbar3778@yahoo.com>
* adr: light client implementation
Closes#2133
* note on chain IDs
* explain why witnesses are required
* if chain forks maliciously, chain ID stays the same
* add a note about min witnesses while cross-checking
* make: remove sentry setup cmds
removal of make comands for sentry setup. it was unclear if they were being maintained and there has not been a mention of people using them
- closes#4379
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* remove depreacted readme
* add not being maintained section to docs
* update guides with correct path to libs/kv proto files
* Apply suggestions from code review
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* format something to rerun ci
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* docs: update links to rpc
- links to rpc have not been updated. thank you @okwme
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* Update docs/app-dev/indexing-transactions.md
* docs: minor doc fixes
- minor doc fixes that i ran into while reading things
- test if we have github actions
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* no github actions yet
* add with
* revert and change wording
* Separate ADR Tendermint Mode from ADR-051
* Update docs/architecture/adr-052-tendermint-mode.md
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Marko <marbar3778@yahoo.com>
* Apply suggestions from code review
Co-Authored-By: Marko <marbar3778@yahoo.com>
* remove line of mode info of rpc
* Add link to ADR table of contents
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Fullnode mode : fullnode mode does not have any capability to participate on consensus
Validator mode : this mode is exactly same as existing state machine behavior. sync without voting on consensus, and participate consensus when fully synced
Seed mode : lightweight seed mode only for maintain an address book, p2p like TenderSeed
Separate ADR Tendermint Mode from ADR-051 #4262
* evidence: introduce time.Duration to evidence params
- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height
- closes#2565
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing and genesis cfg in signer harness
* remove debugging fmt
* change maxageheight to maxagenumblocks, rename other things to block instead of height
* further check of duration
* check duration to not send peers outdated evidence
* change some lines, onward and upward
* refactor evidence package
* add a changelog pending entry
* make mockbadevidence have time and use it
* add what could possibly be called a test case
* remove mockbadevidence and mockgoodevidence in favor of mockevidence
* add a comment for err that is returned
* add a changelog for removal of good & bad evidence
* add a test for adding evidence
* fix test
* add ev to types in testcase
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update evidence/pool_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* fix tests
* fix linting
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* prometheus/metrics: two new metrics for consensus
- add consensus_validator_power metric so if a node is a validator it can see its own power in prometheus
- add last_signed_height metric so if a node is a validator it can be aware of at which height the most recent time it signed.
- closes: #3773
- closes: #3083
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* check if signature is present
* minor change and check if sig is not absent
* add changelog entry
* Update consensus/state.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
* add label with validator address
* change address to vali_address
* add metric missed blocks
* add changelog entry for missed blocks metric
* address naming & add docs
## Issue
Implement a new subcommand: tendermint debug. This subcommand itself has two subcommands:
$ tendermint debug kill <pid> </path/to/out.zip> --home=</path/to/app.d>
Writes debug info into a compressed archive. The archive will contain the following:
├── config.toml
├── consensus_state.json
├── net_info.json
├── stacktrace.out
├── status.json
└── wal
The Tendermint process will be killed.
$ tendermint debug dump </path/to/out> --home=</path/to/app.d>
This command will perform similar to kill except it only polls the node and dumps debugging data every frequency seconds to a compressed archive under a given destination directory. Each archive will contain:
├── consensus_state.json
├── goroutine.out
├── heap.out
├── net_info.json
├── status.json
└── wal
Note:
goroutine.out and heap.out will only be written if a profile address is provided and is operational.
This command is blocking and will log any error.
replaces: #3327closes: #3249
## Commits:
* Implement debug tool command stubs
* Implement net getters and zip logic
* Update zip dir API and add home flag
* Add simple godocs for kill aux functions
* Move IO util to new file and implement copy WAL func
* Implement copy config function
* Implement killProc
* Remove debug fmt
* Validate output file input
* Direct STDERR to file
* Godoc updates
* Sleep prior to killing tail proc
* Minor cleanup of godocs
* Move debug command and add make target
* Rename command handler function
* Add example to command long descr
* Move current implementation to cmd/tendermint/commands/debug
* Update kill cmd long description
* Implement dump command
* Add pending log entry
* Add gosec nolint
* Add error check for Mkdir
* Add os.IsNotExist(err)
* Add to debugging section in running-in-prod doc
* libs/common: Refactor libs/common 5
- move mathematical functions and types out of `libs/common` to math pkg
- move net functions out of `libs/common` to net pkg
- move string functions out of `libs/common` to strings pkg
- move async functions out of `libs/common` to async pkg
- move bit functions out of `libs/common` to bits pkg
- move cmap functions out of `libs/common` to cmap pkg
- move os functions out of `libs/common` to os pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix testing issues
* fix tests
closes#41417
woooooooooooooooooo kill the cmn pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* fix goimport issues
* run gofmt
Closes#4202
- nobody's supporting them
- users who want to try TM should use pre-build binaries
- devs should be able to install using git clone (or use Vagrant)
- validators don't use them (my guess)
* libs/common: Refactor libs/common 01
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* regenerate proto files, move intslice to where its used
* update kv.KVPair(s) to kv.Pair(s)
* add changelog entry
* make intInSlice private
Marko
Denis Fadeev
Erik Grinaker
Anton Kaliaev
Callum Waters
mergify[bot]
Erik Grinaker
Sean Braithwaite
Tess Rinearson
dongsamb
Ethan Buchman
Ayush Kaul
Alexander Bezobchuk