OpenWrt toolchains already use correct CFLAGS for every ARM target
There is no reason to use conservative CFLAGS now
It also causes compile error with GCC 9.1.0
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Moving the DNSDIST package into the IP Addresses and Names subcategory under Network. This will make it easier to find since it will be with other DNS tools.
Signed-off-by: James Taylor <james@jtaylor.id.au>
With this change it is now possible to combine interface action events.
If an interface action is generated by netifd or mwan3 for example ifup,
ifdown, connectd or disconnected and this action is configured in the inteface
uci section, then the conntrack table is flushed by mwan3.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This fixes a crash that happens when dhcpd is configured with a failover
peer, and the failover peer goes down. The crash is due to a dereference
of a freed object. When tracing is enabled (which is the default) the
object in question is referenced by the tracing code and so doesn't get
freed prematurely. I have observed this crash on two different target
platforms (mips and x86_64), and it is reproducible on non-OpenWRT
distros by building isc-dhcpd using --disable-tracing.
This has been reported to ISC, but their response was that it's a low
priority as the simple work-around is to leave tracing enabled.
Re-enabling the tracing code only increases the size of the executable
by about 24KB.
Signed-off-by: Heath Kehoe <yaheath@gmail.com>
Current version in OpenWrt (3.16.2) fails against the Arch Linux
in System Rescue CD's NBD as rootfs (to allow sharing ISO across
network). Based on resolved issues and web searching it seems
nbd had endianness issues (which affected my ath79 device).
This updates to 3.19 which allows System Rescue CD PXE boot with
NBD rootfs to work.
Removed patches no longer required due to upstream changes, and
added new configure option (--without-libnl) required to avoid
linking against full libnl and libnl-genl (if present in build).
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
* change iptables whitelist target from 'ACCEPT' to 'RETURN'
to stop traversing the banIP chain and resume at the next chain
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Add patch that detects when -latomic is needed.
Fix compilation without deprecated OpenSSL APIs.
Hard-code lua to avoid luajit dependency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Commit 32aaaaa led to failures when openwrt ARCH did not match kernel
ARCH, and this may not be its only side-effect.
This restores the previous Build/Compile and Build/Install, using the
default ones only when using external toolchain; in this case, ARCH is
set to LINUX_KARCH.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Two seperate package names were chosen instead of menu selected options
because dependents need a ready (large) package in release directory.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Expressions '-o', '-a', and '\( \)' within test or '[ ]' are obsolete.
POSIX allows few arguments to test, so long expressions are not
portable. '[ p -a q ]' can be replaced with '[ p ] && [ q ]' instead.
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
This removes radicale-py2, the Py2 variant, and renames radicale-py3 to
radicale.
This also makes a number of changes:
* Actually use the Python package build system (from python3-package.mk)
* Download source from PyPI instead of GitHub git repo
* Remove unnecessary PKG_DEFAULT_DEPENDS definition
* Depend on python3-urllib instead of python3-email (now that urllib is
separate from python3-light and has python3-email as a direct
dependency)
* Move package description from menuconfig help to the actual
description field
* Remove unnecessary preinst script (default prerm will stop the
service now that the package name matches the init.d script name)
* Remove unnecessary lib/upgrade/keep.d entry (changed conffiles are
preserved by sysupgrade by default)
* Remove unnecessary postinst script (Python build system will set the
correct shebang)
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
libevhtp 1.2.18 made API changes, and unbundled oniguruma.
To adapt seafile-server, some patches from Alexandre Rossi's debian
packaging at http://sousmonlit.zincube.net/~niol/repositories.git/
were applied.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Instead, use @jow-'s suggestion of just checking for the presence of the
executables to find the installed web servers.
Fixes#8529.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Libevhtp is building a static library, used by seafile-server.
Every time the libevhtp binary changes, seafile-server needs a release
bump.
Leave a note in the libevhtp Makefile, as a reminder.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
The Makefile currently redefine the Compile and Install functions.
This is not working when using an external toolchain because some
flags are not interpreted, like CROSS_COMPILE. It is possible to
override the MAKE_FLAGS and MAKE_INSTALL_FLAGS instead.
Signed-off-by: Sébastien Blin <sebastien.blin@savoirfairelinux.com>
Update to latest stable release 5.54
Add new options ticketKeySecret and ticketMacSecret to uci validation.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Maintainer: me
Compile tested: armv7l, OpenWRT SDK
Run tested: armv7l Linksys WRT1900ACS, OpenWrt SNAPSHOT, r9987-655fff1571 -
confirmed dnsdist links correctly against dependencies and doesn't experience
errors at run-time when enabling features.
Description:
dnsdist is a highly DNS-, DoS- and abuse-aware loadbalancer. Its goal in life is
to route traffic to the best server, delivering top performance to legitimate
users while shunting or blocking abusive traffic.
dnsdist is dynamic, its configuration language is Lua and it can be changed at
runtime, and its statistics can be queried from a console-like interface or an
HTTP API.
https://dnsdist.org/Closes: PowerDNS/pdns#3294
Signed-off-by: James Taylor <james@jtaylor.id.au>
Simplified the Makefile and fixes compilation with uClibc-ng. Also added
IPv6 support.
Took the time to clean up the Makefile with other useful options.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
BIND now requires POSIX thread and IPv6 support to build
Add filter-AAAA plugin
Remove unrecognized options
Remove patch that no longer needed
- 002-autoconf-ar-fix.patch
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* remove needless sort step to reduce system load
* change maxqueue default in backend and LuCI frontend
to '4' to reduce (default) system load
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Major new release of mosquitto.
This release rolls up the initial 1.6.0 release, plus the subsequent
build/bug fixes of 1.6.1 and 1.6.2.
Original upstream changelogs:
https://mosquitto.org/blog/2019/04/version-1-6-released/https://mosquitto.org/blog/2019/04/version-1-6-1-released/https://mosquitto.org/blog/2019/04/version-1-6-2-released/
Major features of interest:
* MQTTv5 support
* performance improvements
* ALPN support
* OCSP staping support
* OpenSSL Engine support
* TLSv1.0 support dropped
Currently adds two patches to continue supporting OpenSSL engine support
being disabled, and a missing header include. These are both tracked
upstream and are expected to be dropped in a subsequent release.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Marko Ratkaj
Daniel Golle
Deng Qingfang
Rosen Penev
Alexander Ryzhov
James Taylor
Jo-Philipp Wich
Florian Keller
Florian Eckert
Maxim Storchak
Heath Kehoe
liudf0716
Daniel F. Dickinson
Dirk Brenken
Nikos Mavrogiannopoulos
Jianhui Zhao
Eneas U de Queiroz
Eric Luehrsen
Jeffery To
Peter Wagner
Lucian Cristian
Toke Høiland-Jørgensen
Sébastien Blin
W. Michael Petullo
Andy Walsh
Karl Palsson
Moritz Warning
Miroslav Lichvar