* proactively scan and switch to a higher prioritized uplink,
despite of an already existing connection,
this is configurable via 'trm_proactive' option
(default '1', enabled)
* fix some minor list trim issues
* optimize wlan scanning behavior
* refine debug messages
Signed-off-by: Dirk Brenken <dev@brenken.org>
A multi-year DNSSEC root key update is in progress, as described at
https://www.isc.org/downloads/bind/bind-keys/. This change refreshes the
bind.keys file, ensuring that the new key, in place as of 2018-10-11,
will be recognized and trusted.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
delv is a tool for sending DNS queries and validating the results, using the
same internal resolver and validator logic as named.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
This includes the fix for CVE-2018-5738: When recursion is enabled but the
allow-recursion and allow-query-cache ACLs are not specified, they should be
limited to local networks, but they were inadvertently set to match the default
allow-query, thus allowing remote queries.
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
- fix AXFR zones to delay a potentially large download with ntp-hotplug
- fix odhcpd link script to properly delete expired lease data from DNS
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
If we set the option "local_source" in the globals mwan3 section to "none",
traffic generated by the router it self will always use the default route from
the wan interface with the lowest metric. If this interface is down
the router traffic still uses the connection with the lowest metric but
this is disconnected. Load balancing and failover from the lan site is
still possible. Only router generated traffic is not load balanced and
could not use failover.
To solve this issue with router initiated traffic add the additional
option "online_metric" to the mwan3 interface section.
If the interface is connected then this lower "online metric" is set in the
default routing table.
With this change we have at least a failover with router initiated
traffic.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
During runntime of mwan3 we could add dynamicly networks to this ipset
which would then treated as connected networks by mwan3.
This is also usefull for ipsec.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
With the list param "rt_table_lookup" in the mwan3 section globals,
it is now possible to add a additional routing table numbers which would get
also parsed and will be added to the connected network.
So mwan3 will treat them as they are directly connected to this device.
This could be usefull if we use ipsec.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The generation for reporting the policies uses the same code add a
common function to reduce duplication.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This adds a couple of patches when setting some openssl options:
* ECDSA code in openssh-compat.h and libressl-api-compat.c needs to be
be guarded by OPENSSL_HAS_ECC; otherwise, it will not build with
openssl compiled without ECC support.
* Fix openssl version number in openbsd-compat/openssl-compat.c which
failed to compile --with-ssl-engine; this option is used when
CONFIG_OPENSSL_ENGINE_CRYPTO=y
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Signed-off-by: Peter Wagner <tripolar@gmx.at>
This package forces the use of Google and Bing safe search by default.
It does this by adding hosts files for dnsmasq to use. These hosts replace the
normal IP addresses for Google and Bing with addresses that force safe
search to be turned on all the time.
Google and Bing Safe Search are suitable for most businesses, schools, and
families who wish to block adult content. This package also offers
YouTube's restricted and 'restricted moderate' via a configuration
option. The reason that this is not enabled is that it is probably more
suitable for children rather than a wide audience.
This package is designed so that other services that offer safe search can be
added easily in the future.
For more information about safe search please visit these URLs:
- https://support.google.com/websearch/answer/186669
- https://help.bing.microsoft.com/#apex/18/en-US/10003/0
- https://support.google.com/a/answer/6212415
Signed-off-by: Gregory L. Dietsche <gregory.dietsche@cuw.edu>
Disable PCRE process searching to avoid linking against libprce, which
would cause the build to fail due to a missing dependency. With the
--without-pcre switch, build fails due to an undefined reference, so do
it via CONFIGURE_VARS instead.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[disable PCRE process searching]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
darkstat includes its own strlcat and strlcpy, making the dependency
somewhat pointless.
Fixes compilation ever since glibc dependency on libbsd was removed.
Also removed std=gnu99 as it's not needed with GCC7.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Switch to codeload for simplicity. Rearranged Makefile a bit for consistency between Makefiles.
Removed version dependency for seafile-server to avoid breaking builds.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit brings UCI support to the stubby package.
o All options are documented in the README.md file.
o The README.md file has been re-written to include a short usage
manual.
o The default configuration now includes more Cloudflare addresses.
o The stubby service is (re)started using procd triggers from a
specified interface with a configurable time delay.
o Round robin use of upstream resolvers is now activated by
default.
o Client privacy is now activated by default.
o Options are added for specifying the log level of the daemon and
command line options passed to the stubby command.
Signed-off-by: Jonathan G. Underwood <jonathan.underwood@gmail.com>
Get downtime information for the tracked mwan3 wan interfaces.
The information shows how long this interface is in disconnected state.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Get uptime information for the tracked mwan3 wan interfaces.
The information shows how long this interface is in connected state.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If a interface is down, call ubus will return an null message which is
used to json_load, it causes json_get_vars gets value from last load and
l3_device various is nonzero.
Signed-off-by: Kyson Lok <kysonlok@gmail.com>
Added PKG_USE_MIPS16 as it seems not to build under mipsel.
Error: opcode not supported on this processor: mips32r2 (mips32r2) `sync'
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The first is needed for 4.14 (maybe the relevant parts got packported and
the second is for when OpenWrt migrates to 4.19.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
PR includes switch to codeload tarballs and rename from netopeer2 to
Netopeer2 for better codeload integration.
Signed-off-by: Mislav Novakovic <mislav.novakovic@sartura.hr>
Currently luci-app-sqm provided by sqm-scripts depends on luci-base instead
of selecting it, this leads to an indirect circular dependency in kconfig:
tmp/.config-package.in:34646:error: recursive dependency detected!
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:34646: symbol PACKAGE_iptables is selected by PACKAGE_sqm-scripts
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:961: symbol PACKAGE_sqm-scripts is selected by PACKAGE_luci-app-sqm
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:22421: symbol PACKAGE_luci-app-sqm depends on PACKAGE_luci-base
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:21387: symbol PACKAGE_luci-base is selected by PACKAGE_luci-lib-iptparser
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:22899: symbol PACKAGE_luci-lib-iptparser is selected by PACKAGE_luci-app-splash
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:22402: symbol PACKAGE_luci-app-splash is selected by PACKAGE_luci-mod-freifunk-community
For a resolution refer to Documentation/kbuild/kconfig-language.txt
subsection "Kconfig recursive dependency limitations"
tmp/.config-package.in:21552: symbol PACKAGE_luci-mod-freifunk-community depends on PACKAGE_iptables
Solve the issue by turning the dependencies into selecting ones which also
matches the behaviour of other LuCI applications.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This should fix compilation as wolfSSL currently does not define
wolfTLSv1_client_method. And as the comment suggests, this is only TLS 1,
not 1.0 and above.
SSLv23 is TLS 1.1 and above as currently configured in the wolfssl package
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Add the ipvsadm command line tool to set up, maintain or inspect the virtual
server table in the Linux kernel.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Dirk Brenken
Noah Meyerhans
Yousong Zhou
Rosen Penev
Philip Prindeville
brv phoenix
Eric Luehrsen
Daniel Golle
Florian Eckert
Peter Wagner
Stijn Tintel
Jacob Siverskog
Karl Palsson
Gregory L. Dietsche
Christian Lachner
Jaehoon You
Andy Walsh
Jonathan G. Underwood
Daniel Salzman
Kyson Lok
David Yang
Mislav Novakovic
Jo-Philipp Wich
Chen Minqiang