As some ipq40xx CPUs support frequency scaling, enable building
collectd-mod-cpufreq for ipq40xx (for private builds) and
its package architecture brcm2708_bcm2709 (for buildbot)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Update collectd to 5.10.0
* leave new plugins as disabled for now (procevent, sysevent)
* refresh patches. Remove unenecessary version fix
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Upstream project's behaviour of reporting this data source in range 0-1
is used by at least CentOS 7 collectd 5.8.1, very likely the same
behaviour is also in widely use by other distributions.
The change is important for providing consistent experience across
collectd deployments on different environments
Ref: https://github.com/collectd/collectd/pull/3244
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
The only action the Threshold plugin takes itself is to generate and
dispatch a notification. Other plugins can register to receive
notifications and perform appropriate further actions.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Redmine-patch-id: 3680
If I build an image with the imagebuilder I get the following output
during image building:
../root-x86/etc/init.d/collectd: line 4: /usr/share/libubox/jshn.sh:
No such file or directory
To remove this messsage move include to the needed postion, so that the
message does not occur during image building on the host system anymore.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Update collectd to version 5.9.0
* remove backported upstream patches (sensors, modbus)
* remove lua patch that has been been implemented upstream
(See collectd PR 3144)
* refresh patches and accommodate into upstream path changes
* place the 'stations' datatype for iwinfo in alpbetically
correct place in types.db
* add libmnl dependency to 'processes' plugin required for the
new Linux process Delay Accounting capability.
(Alternatively the capability & requirement might be patched away
in Makefile.am, HAVE_LIBTASKSTATS from collectd_4ea7a572)
* new plugins (disabled): ampq1, gpu_nvidia, pcie_errors,
write_stackdriver, write_syslog
compile-tested: ar71xx/WNDR3700 (all plugins)
run-tested: ar71xx/WNDR3700 (selected plugins)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
If you want to register more than one lua plugin, you cannot start the
collectd.
You get always the error message:
"The read function "lua/(null)" is already registered. Check for
duplicates in your configuration!"
This is not what I expect and what the documenation says.
With this change it is now possible to registrate more then one lua
Script.
See https://github.com/collectd/collectd/pull/2379
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* 938897a2 Add scale and shift to modbus plugin
* 60280b80 correcting all the wrongs
* a00ab529 Add support for RS485 to modbus plugin
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Backport an upstream patch to remove the upper limit of
lm-sensors version check, so that using lm-sensors 3.5.0
will work.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The ethstat plugin for collectd provides a convenient way to track a large list
of variables associated with network interfaces such as channel busy time and
many others.
A list of the available variables for a given interface may be acquired by
running ethtool -S <interface>
Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
This is a long overdue followup commit to openwrt/openwrt@5d9eeab
("build: remove obsolete references to cris and avr32")
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Even on a powerful platform a collectd process'
activities are sometimes affecting throoughput and
latency. This is a backgroud process, that should not
be running with default priority.
Even if it is a little deplayed, that is not a worry in
this case. The routing should be the main priority,
stats collection can wait a bit.
Tested on Netgear R7800
Signed-off-by: Marc Benoit <marcb62185@gmail.com>
Make niceness more moderate, bump version.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Support for little-endian word-order of 32-bit fields was added
upstream recently. Import the corresponding PR
https://github.com/collectd/collectd/pull/2660
into a local patch and bump package release.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The collectd network plugin has the ability to sign and/or encrypt its
traffic, allowing secure interaction with other collectd instances. This
had been disabled due to issues with the collectd build system.
Fix up the configure parameters to work correctly and re-add the option.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
This patch upgrades the collectd package from 5.7.2 to 5.8.2.
All openwrt patches got either updated or deleted in case they
are already included into upstream collectd.
The new collectd 5.8.0 package compiles and got tested on current
lede trunk with latest luci on an PCengines APU. All default plugins
(enabled via Openwrt Makefile) - so also iwinfo - are running fine
with the new version.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Amended with the following changes:
* preserve git file history by avoiding unnecessary patch renames
* mark new plugins introduced with 5.8 branch as disabled
Compile tested all plugins with ipq806x
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Uptime plugin fails to adjust for system time changes after boot.
As Openwrt/LEDE routers usually do not have a RTC, the system time
gets adjusted with NTP possibly after collectd has already started.
But collectd continues to use the initial time set by 'sysfixtime',
which can lead to incorrect uptime calculations.
Apply a proposed fix from upstream that uses /proc/uptime
Reference to https://github.com/collectd/collectd/pull/2034Fixes#4819
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Enable collectd-mod-cpufreq also for armvirt to make it
available for ipq806x devices in LEDE buildbot snapshots.
LEDE phase2 buildbot for arm_cortex-a15_neon-vfpv4 that is
the package arch for ipq806x, uses armvirt SDK instead of
ipq806x SDK.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Buildbot revealed that Collectd 5.7.1 uses libcap to evaluate system
capabilities and display advice on some plugins (dns, iptables, exec,
ping, ceph, turbostat).
Disable the check in configure.ac in order to avoid a dependency
for libcap. (It is not that big, only 6 kB .ipk, but still avoid that.)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Marcin Jurkowski
Hannu Nyman
Florian Eckert
Jan Pavlinec
Yousong Zhou
Sven Roederer
Daniel Golle
Petko Bordjukov
Sebastian Kemper
Marc Benoit
Jonathan McDowell
Thomas Huehn
Miroslav Lichvar