Switched to codeload tarballs. Simplified the Makefile as a result.
Fixed license information.
Added PKG_BUILD_PARALLEL for faster compilation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
$(FPIC) evaluates to -fpic on ARM64, breaking compilation:
The dnsdist build system handles it properly anyway. Added --with-pic to
make it explicit.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Allocate dynamic buffer memory for decoding post data and allow post
requsts up to 128KB compared to the previos 1KB limit.
Also support downloading /proc and /sys files by falling back to
chunked transfer encoding when the file size cannot be determined.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jool as well as the jool-siit package depend on jool-common, which isn't
currently built nur packages up. Compile and include jool-common with
the jool package to fix this.
The iptables component is currently also not packaged up. Fix this also.
Signed-off-by: David Bauer <mail@david-bauer.net>
Since the brcm2708 target has been renamed to bcm27xx in openwrt
repo, update the dependency to the target in this package.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
fb3be84 Split out ebtables anti-leak rules in phantap-early, improve logs
e3fbe61 phantap-learn: use libnl instead of ip executable
b2c2514 phantap/Readme: Warn about OpenWrt failsafe leak
394d3b7 Readme: Update to add blogpost link and detection via Internet traffic
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* ksmbd: update to 3.1.3
* ksmbd-tools: update to 3.2.1
* add new package build option "KSMBD_SMB_INSECURE_SERVER"
* enable smb1 support to kmod by default
* add new UCI option "allow_legacy_protocols" to section [globals]
* ksmbd: release 3.1.3 version
* ksmbd: lock SMB2_QUERY_INFO_HE request with read lock
* ksmbd: fix potential racy between query_dir and ksmbd_vfs_empty_dir
* ksmbd: fix racy issue between deleting file and checking empty directory
* ksmbd: don't register interface which are member of bridge
* ksmbd: SO_REUSEADDR is no property of tcp_setsockopt
* ksmbd: release 3.1.2 version
* ksmbd: fix read caching buffer size as max_read_size
* ksmbd: fix the infinite loop of handling FSCTL_QUERY_ALLOCATED_RANGES
* ksmbd: use compounding for smb2 flush
* ksmbd: downgrade error message to debug in get_file_all_info
* ksmbd: rename usmbd to ksmbd.mountd in trvis-ci
* ksmbd: release 3.1.1 version
* ksmbd: does not work if ipv6 module is not loaded or compiled in
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: capsule ifdef CONFIG_SMB_INSECURE_SERVER with smb1 codes
* ksmbd: update README file
* ksmbd-tools: release 3.2.1 version
* ksmbd-tools: revert "remove glib2.0 dependancy" patch
* ksmbd-tools: release 3.2.0 version
* ksmbd-tools: update how to restart ksmbd in README file
* Revert "ksmbd-tools: disable tbuf and rbuf caching by default"
* ksmbd-tools: disable tbuf and rbuf caching by default
* ksmbd-tools: replace usmbd prefix with ksmbd prefix
* ksmbd-tools: update README file
* ksmbd-tools: fix warning ignoring return value of 'fread'
* ksmbd-tools: downgrade unsupported command print to debug
* ksmbd-tools: remove GLIB_LIBS in Makefiles
* ksmbd-tools: rename usmbd, smbuseradd, smbshareadd to ksmbd.mountd, ksmbd.adduser and ksmbd.addshare
* ksmbd-tools: fix null pointer dereference in _list_remove
* ksmbd-tools: fix the sanity check fails depending on the password length
* ksmbd-tools: fix build error(not found glib.h)
* ksmbd-tools: remove glib-2.0 dependancy
* ksmbd-tools: update README to add libglib2.0-dev for Ubuntu preprequisite packages
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Add tests for nginx-ssl-util and nginx-ssl-util-nopcre using (fake)chroot.
Clean the code up making nginx-ssl-util a header file.
Both changes are for better (future) code quality only.
There are minor functional improvements:
* fix compiler error of gcc7 by using std=c++17
* fix error if there is no lan/loopback interface
* notice instead of error message if there is no default server
* add ipv6-prefix-assignment.*.local-address.address for LAN
* add CONFLICTS in Makefile for choosing the right version
* add cast to release of unique_ptr to avoid warning
* add version message to help message
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
It was provided by both the freeradius3 and freeradius3-mod-realm packages.
Now provided by the freeradius3 package only.
Signed-off-by: Robby K <robbyke@gmail.com>
gettid happens to be supported by all glibc, musl and uclibc, but
configure cannot detect it when cross-compiling. This adds a configure
variable for it.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Added missing limits header. This is normally included in fortify-headers,
which I have disabled locally.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Properly quote arguments when assembling the command line and eval the
proto_run_command() invocation in order to prevent the shell from
improperly splitting the command arguments on $IFS.
Fixes: #10137
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
- Major version jump from v2.0 to v2.1
- Update haproxy download URL and hash
- Add new patches (see https://www.haproxy.org/bugs/bugs-2.1.2.html)
- Stop building LUA 5.3 in the haproxy build-process and use liblua5.3 as a dependency instead
Signed-off-by: Christian Lachner <gladiac@gmail.com>
Changelog:
* Fix OpenWRT with existing forwarder + fix dnsmasq restore issue
* Refactor service execution to better report errors
* Refactor merlin tz setup so it does not need to curl on boot
* Improve upgrade command for install.sh
* Do not mask curl error on install
* Fix timezone logging issue with Merlin
* Add support for Merlin John's fork
* Add raspbian support to installer
* Fix upgrade not reinstalling service
* Limit the aarch64 fix to merlin
* Reset DHCP DNS to self on Merlin router setup
* Fix memory issue with aarch64 based router
* Update Go version
* Allow override of detected env
* Setup timezone correctly on Merlin init script
* Don't ignore curl error on install
* Fix Asus Merlin John’s fork trust store issue
* Fix synology auto setup
* Fix report client info not enabled with setup-router option
* Add support for edgeos DHCP lease file locations
* Fix signal handling when running as a service
* Fix exit menu keyboard shortcut
* Do not fail on upgrade if uninstall failed
* Fix exit menu in installer
* Remove failing upx (for now)
* Make sure nextdns keeps running once ssh session is closed
* Add auto setup of Synology with DHCP server enabled
* Use router's DNS to discover more names
* Get A/AAAA from both answer and addition sections
* Ignore certain invalid names during discovery
* Fix activate with setup-router
* Fix serveral install issues
* Add exponential backoff to mdns probe retry
* Correctly end dhcp lease probing when discovery is cancelled
* Store DHCP/MDNS discovered addrs separately to avoid ping/pong
discovery
* Add DHCP lease support to client discovery
* Do not report mdns listen unreachable error as start will retry
* Reimplement mdns client discovery
* Fix installer GOARCH detection with arm6+
* Fix bin install on platforms needing sudo
* Correctly detect edgeos and ddwrt as routers
* Fix install.sh sudo
* Disable upx as it break many platforms
* Fix installer regression with merlin
* Fix mips64 detection
* Fix OpenWRT detection
* Fix UPX post build script
* Fix install with John's Asuswrt-Merlin fork
* Fix more DDWRT
* Fix DDWRT support
* Fix merlin service add/remove
* Use UPX to compress binaries typicially used on routers
* Revert "Remove direct dep on reflect"
* Use letters for installer menus
* Fix install script for upgrades not working if binary is running
* Do not return an error on mdns listen if at least one interface worked
* Fix installer for synology
* Fix pfSense support
* Remove the logs for each server on each connect
* Move install instructions to wiki
* Fix install.sh uid detection with merlin
* Fix install.sh for arm6+
* Add Synology init system support
* Fix install.sh
* Add a generic router setup that just changes the listen to public
* Update README
* Add auto setup support for EdgeOS
* Restore per OS install instruction in readme during installer beta
* Refactor install.sh
* Remove dep on golang.org/x/net/ipv[4|6]
* Remove direct dep on reflect
* Rewrite the zeroconf code to use dnsmessage instead miekg/dns
* Add auto setup support for DD-WRT
* Improve arch detection
* Add auto setup support for OpenWRT
* Add automatic router setup support
* Fix service
* Remove dep en seq on sysv style init scripts
* Add Entware init system support
* Report init system used on install and in UA
* Add EdgeOS support
* Reads /etc/hosts before forwarding queries to the upstream
* Fix localhost resolution with Linux arch empty /etc/hosts
* Use /etc/hosts file to resolve listen address and list on all IPs
listed
* Add support for multiple router firmware
* Fix hardened privacy disabling dual stack
* Add a config set sub command and refactor commands handling
* Add support for activate on freebsd
* Fix inverted MAC matching
* Add unit test for conf prefix match #35
* Activate uses listen address instead of static 127.0.0.1
* Improve FreeBSD integration
* Add FreeBSD support
* Fix a typo
* Use zip for windows archive
Signed-off-by: Olivier Poitrey <rs@nextdns.io>
Edited PKG_RELEASE to 1
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Compile tested: arm_cortex-a15_neon-vfpv4, TP-Link Archer C2600, master
Run tested: TP-Link Archer C2600
Change log for v2.99:
[FIX] Fixed broken JSON parsing (include missing uuid_site).
[FIX] FreeBSD: Fixed 10x support.
[FIX] OPNsense: Fixed path to xmllint.
[IMP] Switched to libtcmalloc minimal.
[IMP] Added metadata extraction from SSDP queries/responses.
[IMP] Added automatic building of bundled gperftools when enabled.
[IMP] Removed bundled packages that are no longer needed.
[IMP] Always display JSON status even when stale.
[IMP] CentOS: Added support for CentOS 8.
[IMP] CentOS: Removed support for CentOS 6.
[IMP] OPNsense: Added support for OPNsense 19x.
Signed-off-by: Darryl Sokoloski <darryl@sokoloski.ca>
Instead of the default nginx.conf file this file is a small variant
without examples that enables the /etc/nginx/conf.d/ directory.
It will pull in all configuration files from the conf.d directory.
So, other packages can add their server parts in the conf.d directory
without modifying the main nginx.conf file (cf. #9860).
Changed also the default logging behavior:
error_log stderr; # the init forwards it to logd
access_log off;
See the updated documentation at:
https://openwrt.org/docs/guide-user/services/webserver/nginx
Signed-off-by: Peter Stadler <peter.stadler@student.uibk.ac.at>
Rosen Penev
David Bauer
Christian Lachner
Jo-Philipp Wich
W. Michael Petullo
Jan Pavlinec
Aleksander Morgado
Xingwang Liao
Adrian Schmutzler
DENG Qingfang
Etienne Champetier
Moritz Warning
Andy Walsh
Greg Dietsche
Peter Stadler
Robby K
Sebastian Kemper
Andreas Nilsen
Josef Schlehofer
Dirk Brenken
Olivier Poitrey
Darryl Sokoloski