The configuration for the ksmbd service is auto-generated when
the OpenWRT configuration changes, and also during startup,
hence ksmbd.init has to reload the kernel module. It does that by
calling kill_server, which does not perform cleanup. This results
in ksmbd being killed but not restarted properly during boot.
This patch resolves the issue by using stop_service, which performs
proper cleanup.
https://forum.openwrt.org/t/ksmbd-samba3-4-alternative-ex-cifsd-smbd-package-support-thread/51695/68
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
- Update haproxy download URL and hash
- Switched over to using USE_LIBATOMIC in favor of -latomic
- Added a patch which fixes nossl builds
Signed-off-by: Christian Lachner <gladiac@gmail.com>
7bf79a2 ubus: set scan duration to roam scan interval
b4eb49e policy: only select nodes with better signal when roaming
5d5a0be ubus: don't request measurement from unsupported STAs
abc6fe0 local-node: update STA RRM capabilites
5ec713b node: determine roamability when selecting neighbors
d0cd65b node: save created time for node
a5c21ae ubus: prioritize neighbor reports on bss transition
532a48d local-node: prioritize neighbor candidates
4862080 node: keep track of roam-sources and roam-destinations
6a20591 sta-info: add last_connected field
Signed-off-by: David Bauer <mail@david-bauer.net>
Commit 1038ac1235 ("openvswitch: add support for definining bridge ports...")
added two new options:
- drop_unknown_ports
- ports
They are missing from the README, so add them.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
libxslt/host is complaing that static libxml2 should be with -fPIC.
Unconditionally enable -fPIC for for host build of libxml2.
Fixes: dc701d61b ("libxml2: don't build host shared libraries")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
There's been a bit of overlapping opinions on some of these packages.
The best thing to do here is to reduce ownership and relinquish my
control.
This patch does that.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2021-09-27 v1.11.0 "Smew Duck"
This maintenance release adds support for VBR mode in VP9 rate control
interface, new codec controls to get quantization parameters and loop filter
levels, and includes several improvements to NEON and numerous bug fixes.
- Upgrading:
New codec control is added to get quantization parameters and loop filter
levels.
VBR mode is supported in VP9 rate control library.
- Enhancement:
Numerous improvements for Neon optimizations.
Code clean-up and refactoring.
Calculation of rd multiplier is changed with BDRATE gains.
- Bug fixes:
Fix to overflow on duration.
Fix to several instances of -Wunused-but-set-variable.
Fix to avoid chroma resampling for 420mpeg2 input.
Fix to overflow in calc_iframe_target_size.
Fix to disallow skipping transform and quantization.
Fix some -Wsign-compare warnings in simple_encode.
Fix input file path in simple_encode_test.
Fix valid range for under/over_shoot pct.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Those devices don't have 'device' propery, only 'l3_device', which
causes 'attempt to concatenate field 'device' (a nil value)' lua error.
Use 'l3_device' as a fallback in this case.
Signed-off-by: Jacek Konieczny <jajcus@jajcus.net>
Fixes 'transmission-web' for users which didn't manually configure the
'web_home' option.
Assume transmission's default in case 'web_home' isn't defined and
mount the directory so it can be accessed from inside the jail.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add missing "inotify_add_watch", "inotify_init1" and "inotify_rm_watch"
syscalls to seccomp filter which are needed in case watch_dir feature
of transmission is used.
Fixes#16972
Reported-by: @siwind
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
As written in the commit message:
Depending on your conntrackd configuration, events might get lost,
leaving stuck entries in the cache forever. Skip checking the conntrack
ID to allow for lazy cleanup by when a new entry that is represented by
the same tuple is added.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Manually re-applied:
008-distutils-use-python-sysroot.patch
016-adjust-config-paths.patch
Drop patch: 003-do-not-run-distutils-tests.patch
There is now a configure option '--disable-test-modules'
And seems we left the '_ctypes_test' around for quite some time.
Dropped now.
Refs:
https://bugs.python.org/issue27640https://bugs.python.org/issue43282
Drop patch: 013-getbuildinfo-date-time-source-date-epoch.patch
Python build honors SOURCE_DATE_EPOCH pretty well now.
Drop setuptools patches. Setuptools should be reproducible with Python 3.6+
according to a mention here:
https://github.com/pypa/setuptools/pull/1690#issuecomment-536517456
It's time to let upstream fix Setuptools reproduce-ability.
Drop patch: 010-do-not-add-rt-lib-dirs-when-cross-compiling.patch
I can't seem to fully remember why it's there.
And it seem to build fine without it.
Drop patch: 015-abort-on-failed-modules.patch
Python build supports a similar PYTHONSTRICTEXTENSIONBUILD=1 env-var
option.
Add patch: 026-openssl-feature-flags.patch
We need to keep this in our tree for a while.
See:
https://bugs.python.org/issue45627
Backport patch: 027-bpo-43158-Use-configure-values-for-building-_uuid-ex.patch
Link: https://github.com/python/cpython/pull/29353
Fixes the build for uuid C module.
Add patch: 028-host-python-support-ssl-with-libressl.patch
We need the _ssl module working on the host-side with LibreSSL for pip to
work to download from https://pypi.org
Refs: https://github.com/openwrt/openwrt/pull/4749
Add patch: 029-disable-deprecation-warning.patch
Fixes apparmor build. The warning causes a configure error.
Refreshed the rest of patches.
Some old build-flags were removed. They don't seem to be necessary anymore.
Split python3-uuid from python3-light. To better manage the libuuid library
(if needed). Also, fixing the uuid C module build. Seems this was failing,
and was falling back to using hashlib.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Open vSwitch does not bring up ports automatically. This is not a
problem for wireless ports, or for ports configured in
/etc/config/network, but other ports will be down, and require manual
interaction to be brought up. Configuring them with proto none will
cause netifd to do some actions on them, which might cause undefined
results, and will also bloat the UCI config file.
The cleanest solution is to bring all member ports up as part of the
init script.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Matt Merhar
Georgi Valkov
Tianling Shen
George Iv
Christian Lachner
David Bauer
Eneas U de Queiroz
Stijn Tintel
Oskari Rauta
Daniel Golle
Moritz Warning
Alexandru Ardelean
Luiz Angelo Daros de Luca
Noah Meyerhans
Kerma Gérald
Gerard Ryan
Jacek Konieczny
Michael Heimpold
Igor Bezzubchenko
Nick Hainke
Stan Grishin
Stan Grishin
Olivier Poitrey
Jonathan Pagel
Jeffery To