This change bumps Python3 version to 3.7.1.
Patch `002-fix-implicit-dh-free-declaration.patch` is now included in
upstream.
This also fixes CVE-2018-1061.
https://www.cvedetails.com/cve/CVE-2018-1061/
Compile & run-tested on x86.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The linker option -rpath is required to find libs in staging_dir. Now it
is included when building host modules. Without it the import test of
the _ctypes and _uuid modules would fail. The _ctypes module uses
libffi.so.6 from staging, but OpenSUSE LEAP 15 has libffi.so.7.
It will also fail on LEAP 42.x, Fedora28 and 29 and future or old
versions of Ubuntu.
Fix needed in master and 18.06 branches.
Signed-off-by: Jan Kardell <jan.kardell@telliq.com>
No idea how this creeped up. Probably OpenSSL been has updated recently.
Will send this patch upstream as well, but in the meantime we should fix
the Python3 build.
Build error seems to be:
```
<openwrt>/build_dir/target-i386_pentium4_musl/Python-3.7.0/Modules/_ssl.c:4000:5: error: implicit declaration of function 'DH_free'; did you mean 'lh_free'? [-Werror=implicit-function-declaration]
DH_free(dh);
^~~~~~~
lh_free
cc1: some warnings being treated as errors
Python build finished successfully!
The necessary bits to build these optional modules were not found:
_tkinter _uuid nis
To find the necessary bits, look in setup.py in detect_modules() for the module's name.
The following modules found by detect_modules() in setup.py, have been
built by the Makefile instead, as configured by the Setup files:
_abc atexit pwd
time zlib
Failed to build these modules:
_ssl
Makefile:618: recipe for target 'sharedmods' failed
```
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
zlib is now a host tool and the zlib/host package was removed. this
dependency is not needed any more as there will always be a zlib host
library.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Report https://github.com/openwrt/packages/issues/5638
It was mentioned that this causes build failures on Mac OS X.
The default behavior [in the setup.py script] is to check whether
`--with-system-ffi` is present in the CONFIG_ARGS env var.
However that back-fires a bit when `--with-system-ffi=no`, because the
condition `not '--with-system-ffi' in sysconfig.get_config_var("CONFIG_ARGS")`
evaluates to true.
This is a small bug in the `setup.py` script, but it looks like the
easiest/cleanest way to address it on our end is to just remove it entirely
from the HOST_CONFIGURE_ARGS.
At least that's how it looks like when testing on a Linux machine.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This change was introduced in commit 1c54e2b0fb to address build
issues on Ubuntu 12.04.
However it was reported to cause issues on Mac OS X.
Report: https://github.com/openwrt/packages/issues/5310
It was also reported that removing this on MacOS X fixes the issue.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Since `lang/python` is it's own folder of Python packages
(for both Python 2 & 3), and these build rules are needed
in a lot of packages [especially Python packages],
putting them here makes sense architecturally,
to be shared.
This also helps get rid of the `include_mk` construct
which relies on OpenWrt core to provide, and seems
like a broken design idea that has persisted for a while.
Reason is: it requires that Python 2/3 be built to provide
these mk files for other Python packages,
which seems like a bad idea.
Long-term, there could be an issue where some other feeds
would require these mk files [e.g. telephony] for
some Python packages.
We'll see how we handle this a bit later.
For now we limit this to this feed.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The .mk snippets are not really usable at the moment, as they cannot be
considered for metadata collection (package DUMP) when included through
include_mk. Python packages do not use include_mk anymore for this reason,
so the install commands can be removed as well.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
The Modules/getbuildinfo.c allows the use of DATE and TIME
macros to be defined via CFLAGS.
These vars, control the build date & time when the
interpreter is opened, and can be read via the
`platform._sys_version()` function.
So, a conversion from SOURCE_DATE_EPOCH to DATE & TIME
is required at build-time.
This is especially needed for `platform._sys_version()`
to work.
The installation of pip seems to rely on this.
The logic has been adapted from:
https://wiki.debian.org/ReproducibleBuilds/TimestampsProposal#Makefile
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This reverts commits 4333d1dcbf and
074d2863be, making Python packages
discoverable again by pkg_resources.
Fixes#5361.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This reverts commit 3c6d14021e.
( which is a revert of commit c764f77dc1 )
The initiall commit ( c764f77dc1 )
was reverted, becase zlib did not have a host-build.
Now it does:
cbe71649bc
So, now it should be good to put this in.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Re-worked patch `003-do-not-run-distutils-tests.patch`
to reduce patch-size.
Removed `011-fix-ncursesw-definition-colisions.patch`
it is fixed upstream.
Refreshed with `make package/python3/refresh`
Resetting PKG_RELEASE to 1.
This variable was never used for pip3 & setuptools, since
VERSION is specified in the package definitions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
See:
https://github.com/openwrt/packages/issues/5278
This should make Python & Python3 packages reproducible
when building.
In my local tests, I got the same sha256 for a sample
.pyc file, so likely this is the solution that should address
this.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This reverts commit c764f77dc1.
The commit caused warnings to be displayed at make defconfig etc.
WARNING: Makefile 'package/feeds/packages/python/python/Makefile'
has a host build dependency on 'zlib/host' but
'package/libs/zlib/Makefile' does not implement a 'host' build type
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This should fix the zlibmodule build on the host side.
Usually, if zlib is not found, Python/Python3 builds fine
without it, but there are some cases where the Python/Python3
interpreter on the host-side requires zlib to run.
At the moment, zlib does not have a host-build.
This should be available when this PR gets merged:
https://github.com/lede-project/source/pull/1329
[ or a similar one that contains host-build support for zlib ].
In the meantime, this change can go into Python/Python3.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
It was reported via
https://github.com/openwrt/packages/pull/5122#issuecomment-347395472
that if bluez-libs is selected as an installable package,
then the error below will show up:
```
* satisfy_dependencies_for: Cannot satisfy the following dependencies for python-light:
* bluez-libs *
* opkg_install_cmd: Cannot install package python-light.
```
This looks like a limitation in the design of package deps,
and maybe a misuse of conditional deps (i.e. PACKAGE_bluez-libs:bluez-libs).
So, to fix this, an idea we're adding an extra symbol
that enfoces installation of bluez-libs if selected.
We also need to add a way to disable bluetooth build
if PYTHON(3)_BLUETOOTH_SUPPORT is de-selected.
Otherwise, bluetooth is installed and the socket
module is broken due to linker errors.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This should hopefully fix the Python3 build on buildbot.
For a while I assumed it may be a build-bot issue, but
then looking through the packages repo [and finding
the bluez package] it looks like, if you try
to build all packages, Python3 detects the bluetooth
headers installed by bluez.
It looks like Python's bluetooth support was somewhat
broken ; it was not detecting the <bluetooth/bluetooth.h>
header, so a backport from Python3 to Python fixed that.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
That way some python packages can choose
to keep their egg-info dirs, if they want to, or they're needed.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Not sure how it can happen that the files are not
installed via the host build.
Maybe some SDK-like build.
Let's make sure they are installed via InstallDev rule too.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
If you build python/python3 and later decide to build
python(3)-setuptools and/or python(3)-pip, the build won't
re-run without adding `CONFIG_PACKAGE_python(3)-setuptools`
and `CONFIG_PACKAGE_python(3)-pip`.
Seems to resolve issue:
https://github.com/openwrt/packages/issues/4529
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Seems it's called underlinking that's happening only
on Ubuntu 12.04 with libressl (that comes from LEDE's
tools folder).
Link here:
https://ubuntuforums.org/showthread.php?t=1870586
I'm still reading about this a bit.
Since I don't really get it.
But applying that fix (as in the link) seems to fix compiling
on Ubuntu 12.04, and tried also on 16.04 (to make sure).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The Build/InstallDev rule is activated only for target builds.
But if someone needs only the host Python, then
these files need to be installed in this phase, and not Build/InstallDev
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
If there is only Python bytecodes, then
the __init__.py script will be concatenated, and
the __init__.pyc as well.
This is becase this bit `path = os.path.join(path, '__init__'+extension)`
is iterated twice.
This is a bug in Python3, also because we ship bytecodes
instead of source code [ with Python & Python3 ].
Python is not affected.
Reported-by: Mirko Vogt <mirko@nanl.de>
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This is in essence fixes pip3.
That means pip3 will ship without Python byte-codes
for a while, until I'll find a better way to fix it.
I couldn't think of a not-very hack-ish way of doing it.
The only draw-back of this, will be that pip3 will run
a bit slower ; but that should be ok for a while.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
I admit this may be be a bit aggressive, but the lang
folder is getting cluttered/filled up with Python, PHP, Perl,
Ruby, etc. packages.
Makes sense to try to group them into per-lang folders.
I took the Pythons.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Well, this slipped by for some time.
This should make the Python core packages even more lighter.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Technically, this just updates build details.
No functionality change to package itself.
So, no need to increase PKG_RELEASE on this change.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Python 3.6 comes with some new cross-compilation logic that
generates filenames/paths with arch, abiflags and mach
included (in filename & path).
Problem is that the generated paths/filenames are not
consistent across archs (noticed on x86_64 & ar71xx),
so patch `016-adjust-config-paths.patch` was added
to mitigate this (by removing extra stuff in paths).
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
And move \`python3-package.mk\` include, same as in python package.
This is mostly to have consistency/similarity between python & python3
packages.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
--sysconfigdir and --sbindir are obtained from --prefix
and --exec-prefix, so no need to have them explicitly
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Alexandru Ardelean
Jan Kardell
Karol Wrona
Martin Strobel
Hauke Mehrtens
Matthias Schiffer
Jeffery To
Hannu Nyman
Mirko Vogt