Enabling OPENVSWITCH in the kernel config selects MPLS. This exposes the
MPLS_ROUTING symbol, which is missing if kmod-mpls is not enabled. On
kernel 5.4 this problem doesn't show up, as the Open vSwitch package
uses the in-tree kernel modules rather than the upstream ones.
Restore the kmod-mpls dependency when using the upstream kernel modules
to fix build.
Reported-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The ifeq check for CONFIG_OPENVSWITCH_WITH_LIBUNBOUND does not evaluate
correctly within the menuconfig, resulting in libunbound not being
selected, resulting in a failing libunbound.so.8 dependency.
Instead add this condition:dependency in the manner defined in the
OpenWrt developer guide.
Signed-off-by: Matthew Hagan <mathagan@fb.com>
ovs_libovsdb_depends and ovs_libofproto_depends append the libatomic
dependency. However in these cases these variables were not previously
defined and thus a reader may search the Makefile for the definition.
Therefore change the operator to explicitly define these dependency
variables, rather than append. In addition add a space after operator to
improve readability and conform to other dependency definitions in the
Makefile.
Signed-off-by: Matthew Hagan <mathagan@fb.com>
Rather than defining dependencies, then appending the libatomic
dependency on the following line, merge all into one definition.
Simultaneously, sort by alphabetical order.
Signed-off-by: Matthew Hagan <mathagan@fb.com>
1. prctl() check is not required for host-compile on any OS due to prctl
is not used in rpcgen which is only one is compiled during host-compile
phase. prctl() check is disabled via HOST_CONFIGURE_VARS in OpenWrt makefile
2. __DARWIN_ONLY_64_BIT_INO_T is true on macos arm64 so struct stat64
and stat64() are not available. This patch defines stat64 as stat if
__DARWIN_ONLY_64_BIT_INO_T is true
Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
Breaking changes:
The database has been replaced with boltdb to try to solve the problem
of database corruption.
Note that the data will not be migrated, but the previous data will be
retained. If you need the previous data, just downgrade v2rayA (v1.5.4).
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
depend on libpcre2 instead of libpcre
also remove patches incorporated upstream into lighttpd 1.4.62
Signed-off-by: Glenn Strauss <gstrauss@gluelogic.com>
route-override IPAM works as meta CNI plugin to override IP route given by previous CNI plugins. It is useful in a case with network-attachment-definition.
Currently route-override verified its feature with podman and crio(with Kubernetes).
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
SpeedTest++
Yet another unofficial speedtest.net client cli interface
For users who instead of python based speedtest client want
to use something that was written in c++...
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
Currently banip matches nginx log entries starting with
nginx[number]:...
I am running a containerized nginx with alpine as base, which
ends up adding log entries without [number] part..
like this:
nginx:...
This patch updates regex for nginx log entry search to include
both versions.
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
The configuration for the ksmbd service is auto-generated when
the OpenWRT configuration changes, and also during startup,
hence ksmbd.init has to reload the kernel module. It does that by
calling kill_server, which does not perform cleanup. This results
in ksmbd being killed but not restarted properly during boot.
This patch resolves the issue by using stop_service, which performs
proper cleanup.
https://forum.openwrt.org/t/ksmbd-samba3-4-alternative-ex-cifsd-smbd-package-support-thread/51695/68
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Django 1.x is not compatible with python 3.10.
Mark the package as BROKEN. Since its dependent packages will also
select it, they will need to be marked BROKEN as well to avoid recursive
dependencies--packages not marked as BROKEN will be able to select the
broken package.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
- Update haproxy download URL and hash
- Switched over to using USE_LIBATOMIC in favor of -latomic
- Added a patch which fixes nossl builds
Signed-off-by: Christian Lachner <gladiac@gmail.com>
7bf79a2 ubus: set scan duration to roam scan interval
b4eb49e policy: only select nodes with better signal when roaming
5d5a0be ubus: don't request measurement from unsupported STAs
abc6fe0 local-node: update STA RRM capabilites
5ec713b node: determine roamability when selecting neighbors
d0cd65b node: save created time for node
a5c21ae ubus: prioritize neighbor reports on bss transition
532a48d local-node: prioritize neighbor candidates
4862080 node: keep track of roam-sources and roam-destinations
6a20591 sta-info: add last_connected field
Signed-off-by: David Bauer <mail@david-bauer.net>
Commit 1038ac1235 ("openvswitch: add support for definining bridge ports...")
added two new options:
- drop_unknown_ports
- ports
They are missing from the README, so add them.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Fixes 'transmission-web' for users which didn't manually configure the
'web_home' option.
Assume transmission's default in case 'web_home' isn't defined and
mount the directory so it can be accessed from inside the jail.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add missing "inotify_add_watch", "inotify_init1" and "inotify_rm_watch"
syscalls to seccomp filter which are needed in case watch_dir feature
of transmission is used.
Fixes#16972
Reported-by: @siwind
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
As written in the commit message:
Depending on your conntrackd configuration, events might get lost,
leaving stuck entries in the cache forever. Skip checking the conntrack
ID to allow for lazy cleanup by when a new entry that is represented by
the same tuple is added.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Open vSwitch does not bring up ports automatically. This is not a
problem for wireless ports, or for ports configured in
/etc/config/network, but other ports will be down, and require manual
interaction to be brought up. Configuring them with proto none will
cause netifd to do some actions on them, which might cause undefined
results, and will also bloat the UCI config file.
The cleanest solution is to bring all member ports up as part of the
init script.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Miroslav Lichvar
Stijn Tintel
Matthew Hagan
Richard Yu
Tianling Shen
Sergey V. Lobanov
W. Michael Petullo
Kerma Gérald
Glenn Strauss
David Bauer
Eric Luehrsen
Josef Schlehofer
Othmar Truniger
Moritz Warning
Oskari Rauta
Olivier Poitrey
Jo-Philipp Wich
Martijn Atema
Peter Gransdorfer
George Giannou
Georgi Valkov
Eneas U de Queiroz
George Iv
Christian Lachner
Noah Meyerhans
Daniel Golle
Nick Hainke
Stan Grishin
Darryl Sokoloski
Wout Bertrums
Matthew Hagan