Major new release of mosquitto.
This release rolls up the initial 1.6.0 release, plus the subsequent
build/bug fixes of 1.6.1 and 1.6.2.
Original upstream changelogs:
https://mosquitto.org/blog/2019/04/version-1-6-released/https://mosquitto.org/blog/2019/04/version-1-6-1-released/https://mosquitto.org/blog/2019/04/version-1-6-2-released/
Major features of interest:
* MQTTv5 support
* performance improvements
* ALPN support
* OCSP staping support
* OpenSSL Engine support
* TLSv1.0 support dropped
Currently adds two patches to continue supporting OpenSSL engine support
being disabled, and a missing header include. These are both tracked
upstream and are expected to be dropped in a subsequent release.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Correct option is "password_file" not "passwd_file"
Originally reported as: https://github.com/openwrt/packages/pull/8642
Added the package bump.
Signed-off-by: Karl Palsson <karlp@etactica.com>
This is a minor bugfix release. Full changelog available at:
https://mosquitto.org/blog/2019/02/version-1-5-7-released/
Most relevant to OpenWrt are probably:
* fixing persistent store bloat
* fix sorting of included config files
* fix errors related to per_listener_settings
Signed-off-by: Karl Palsson <karlp@etactica.com>
This is a bugfix and security release.
CVE-2018-12551: If Mosquitto is configured to use a password file for
authentication, any malformed data in the password file will be
treated as valid. This typically means that the malformed data becomes
a username and no password. If this occurs, clients can circumvent
authentication and get access to the broker by using the malformed
username. In particular, a blank line will be treated as a valid empty
username. Other security measures are unaffected.
=> Users who have only used the mosquitto_passwd utility to create and
modify their password files are unaffected by this vulnerability.
CVE-2018-12550: If an ACL file is empty, or has only blank lines or
comments, then mosquitto treats the ACL file as not being defined,
which means that no topic access is denied. Although denying access to
all topics is not a useful configuration, this behaviour is unexpected
and could lead to access being incorrectly granted in some
circumstances.
CVE-2018-12546. If a client publishes a retained message to a topic
that they have access to, and then their access to that topic is
revoked, the retained message will still be delivered to future
subscribers. This behaviour may be undesirable in some applications,
so a configuration option `check_retain_source` has been introduced to
enforce checking of the retained message source on publish.
Plus the following bugfixes:
* wills not sent to websocket clients
* spaces now allowed in bridge usernames
* durable clients not receiving offline messages with
per_listener_settings==true
* compilation with openssl without deprecated apis
* TLS working over SOCKS
* better comment handling in config files
Full changelog available at: https://github.com/eclipse/mosquitto/blob/fixes/ChangeLog.txt#L1
Signed-off-by: Karl Palsson <karlp@etactica.com>
Adds support for acl_plugin, and acl_opt_* options.
acl_opt_* requires some care as it relies on the internal behaviour of
cfg_load setting environment variables in a certain form. However,
given that _all_ of the cfg_load infrastructure relies on that, we can
be pretty sure that it won't change in a way that will hurt us.
Originally reported as: https://github.com/openwrt/packages/pull/7434
Signed-off-by: Karl Palsson <karlp@etactica.com>
Full changelog at https://github.com/eclipse/mosquitto/blob/v1.5.3/ChangeLog.txt
Primary change:
CVE fix for CVE-2018-12543 - prevent crash on topics that begin with $
but are not $SYS
Selected other fixes relevant to OpenWrt since 1.5.1:
- Fix retained messages not sent by bridges on outgoing topics at the first
connection. Closes#701.
- Fix duplicate clients being added to by_id hash before the old client was
removed. Closes#645.
- Fix excessive CPU usage when the number of sockets exceeds the system limit.
Closes#948.
- Fix for bridge connections when using WITH_ADNS=yes.
- Fix round_robin false behaviour. Closes#481.
- Fix segfault on HUP when bridges and security options are configured.
Closes#965.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Install the .pc files to staging directory to help other packages
to find the libraries.
Since the build does not use CMake, we need to manually install the
files and replace two variables using sed.
Filed upstream as https://github.com/eclipse/mosquitto/pull/950
Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com>
Tested-by: Karl Palsson <karlp@etactica.com>
Bugfix release. Full changelog at:
https://mosquitto.org/blog/2018/08/version-151-released/
Of most interest to OpenWrt:
* Remove use of AI_ADDRCONFIG, which means the broker can be used on systems where only the loopback interface is defined.
* Fix IPv6 addresses not being able to be used as bridge addresses.
* Fix problem opening listeners on Pi caused by unsigned char being default.
* Fix segfault on startup if bridge CA certificates could not be read.
* Fix possible endian issue when reading the memory_limit option.
* library and client bugfixes including: https://github.com/openwrt/packages/issues/6765
Signed-off-by: Karl Palsson <karlp@etactica.com>
This is a major release.
https://mosquitto.org/blog/2018/05/version-1-5-released/
Performance, configurability, protection from fuzzing and bad data,
customizable SSL contexts, all sorts of goodies.
Signed-off-by: Karl Palsson <karlp@etactica.com>
OpenSSL grew the ability to turn off TLS-PSK support. Make sure that
mosquitto turns on/off TLS-PSK support based on this OpenSSL config.
Fixes https://github.com/openwrt/packages/issues/5633
Signed-off-by: Karl Palsson <karlp@etactica.com>
Remove build timestamp. Using currently proposed upstream patch.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Karl Palsson <karlp@etactica.com>
Can't use DEPENDS:= +libname when libname is now a virtual package.
Switch to plain DEPENDS:= libname.
Fixes Github issue 4751
Signed-off-by: Karl Palsson <karlp@etactica.com>
Primarily a bugfix release for a CVE that doesn't affect lede/openwrt,
but also includes some websockets perfomance fixes.
Release notes at https://mosquitto.org/2017/07/version-1-4-13-released/
Signed-off-by: Karl Palsson <karlp@etactica.com>
Full changelog available at:
https://mosquitto.org/2017/02/version-1-4-11-released/
Mostly ipv6 and websockets fixes, but requires a patch (submitted
upstream) to work around an accidental glibc dependency upstream.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Earlier, PROVIDES handling was clarified for the broker and the library.
Use the same style to properly provide the -client-ssl and -client-nossl
packages.
Signed-off-by: Karl Palsson <karlp@etactica.com>
The virtual package declared by PROVIDES must not have the same name as the
variant declaring it, otherwise buildroot will fail with errors like:
cp: '.../pkginfo/mosquitto.provides' and '.../pkginfo/mosquitto.provides' are the same file
In order to fix the above error, rename the existing "mosquitto" and
"libmosquitto" packages into "mosquitto-ssl" and "libmosquitto-ssl"
respectively.
Also substitute use of $(PKG_NAME) with literal "mosquitto" in
Package/* defines to improve readability of the Makefile.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Adding PROVIDES to both the daemon and library and -nossl variants allow
downstream packages to simply declare a single dependency.
mosquitto-client however, still needs to explicitly depend on the ssl or
nossl variant however.
Signed-off-by: Karl Palsson <karlp@etactica.com>
This fixes a bug when mosquitto is crosscompiled in LEDE on OS X.
UNAME is explicitly executed on the host, when we want it to be treated
as a regular linux build.
This patch passes the proper UNAME=Linux variable to the mosquitto
make file in order to respect linux as cross-compiler.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
Reviewed-by: Karl Palsson <karlp@tweak.net.au>
Instead of manually copying files and renaming on install, use the nice
clean "files/<mirror>" structure and just $(CP) them into place.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Building both variants improperly tried to include the passwd utility
for the non-ssl variant, as the variable was set for the ssl variant.
Use properly separated install tasks to install additional files, rather
than hacking around inside the single target.
Signed-off-by: Karl Palsson <karlp@remake.is>
Many users of the SSL build of mosquitto need the passwd utility for
managing keys.
Fixes github issue #1909
Signed-off-by: Karl Palsson <karlp@remake.is>
Patch suggested from upstream. Bumping release and including the patch
directly until a point release is available.
Signed-off-by: Karl Palsson <karlp@remake.is>
Of particular note, this adds optional support for websockets. This
defaults to enabled, as it's the biggest new feature in this release.
A config item is provided to disable it for manual use.
Full release notes: http://mosquitto.org/2015/02/version-1-4-released/
This also remove some build workarounds that are no longer required for
newer versions of mosquitto.
Signed-off-by: Karl Palsson <karlp@remake.is>
Karl Palsson
Dirk Feytons
Michael Heimpold
Jo-Philipp Wich
Thomas Huehn
Karl Palsson
Karl Palsson
Jo-Philipp Wich
Nicolas Thill
Ian Leonard