ed79e4fa quirks: changes touchpad pressure Lenovo Yoga 2 Pro
797a66c1 doc/user: fix broken link to "Observations on trackpoint input data"
7db2a339 quirks: add ModelBouncingKeys for A4Tech X-710BK Mouse
5e7bae44 quirks: Dell 15R touchpad settings for firmware v3
54275910 gestures: cancel hold gestures on thumb detection
033aee76 doc/user: fix broken link to systemd 60-evdev.hwdb
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
1.5.0 - 27 January 2022, Ludovic Rousseau
- Add support of
- ACS ACR1281U
- Circle CCR7125 ICC
- Circle CIR125 ICC
- Circle CIR125-DOT ICC
- Circle CIR215 CL with iProduct 0x2100
- Circle CIR315 DI
- Circle CIR315 with idProduct: 0x0324
- Circle CIR315 with idProduct: 0x7004
- Circle CIR415 CL
- Circle CIR515 ICC
- Circle CIR615 CL
- Circle CIR615 CL & 1S
- ELYCTIS CL reader
- Nitrokey Nitrokey 3
- Thales Shield M4 Reader
- Add support of simultaneous slot access on multi slots readers
- Use FeliCa instead of Felica on SONY request
- Fix SafeNet eToken 5110 SC issue
- Allow vendor control commands for Omnikey 5427 CK
- always compute readTimeout to use a value greater than default 3 seconds
- Check the bSeq value when receiving a CCID frame
- Avoid logging errors when a reader is removed
- Some other minor improvements
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
1.9.5: Ludovic Rousseau 4 December 2021
- pcscd: autoexit even if no client connects
- Fix variable substitution in systemd units
- fix potential race conditions with powerState handling
- Add and use tag TAG_IFD_DEVICE_REMOVED
- UnitaryTests: port code to Python 3
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
This package (more specifically, the host version) was added for mesa in
the video feed[1]; no packages in the packages feed require this
package.
As mesa will be updated to install Mako using host pip[2], there is no
need to continue maintaining the package here. It will be imported into
the abandoned packages repo[3].
[1]: 2e17cb9a1b (commitcomment-63047904)
[2]: https://github.com/openwrt/video/pull/25
[3]: https://github.com/openwrt/packages-abandoned/pull/26
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Fixes multiple security issues:
* CVE-2022-0667 -- An assertion could occur in resume_dslookup() if the
fetch had been shut down earlier
* CVE-2022-0635 -- Lookups involving a DNAME could trigger an INSIST when
"synth-from-dnssec" was enabled
* CVE-2022-0396 -- A synchronous call to closehandle_cb() caused
isc__nm_process_sock_buffer() to be called recursively,
which in turn left TCP connections hanging in the CLOSE_WAIT
state blocking indefinitely when out-of-order processing was
disabled.
* CVE-2021-25220 -- The rules for acceptance of records into the cache
have been tightened to prevent the possibility of
poisoning if forwarders send records outside the
configured bailiwick
Signed-off-by: Noah Meyerhans <frodo@morgul.net>
Patch taken from Alpine Linux git. The problem is missing -lintl linker
flag. Placed in a separate directory as the patch interferes with the
way libintl is implemented in OpenWrt.
Also removed rpath hack, which is not needed as all libraries are
static.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This reverts commit ca21bbf2ed.
5bf74f2 removed the host build of expat and updated packages to use
tools/expat instead.
ca21bbf re-added the host build of expat for mesa (actually wayland) in
the video feed.
Changing wayland to use tools/expat is the proper fix, and there is a
PR[1] open with this change. Therefore this commit can and should be
reverted.
[1]: https://github.com/openwrt/video/pull/24
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
This adds a recipe, Py3Build/InstallBuildDepends, that installs the
requirements listed in HOST_PYTHON3_PACKAGE_BUILD_DEPENDS. This allows
other (non-Python) packages to install host Python packages by calling
this recipe, without having to know the internals of python3-package.mk.
This also updates apparmor to call this recipe.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
The function udev_enumarte_scan_devices returns a value less than 0 on
failure. If this is the case then we terminate the read for this smart
information.
This change was already send upstream. And could be delete in feature
collectd versions.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
This was not a real fix but a workaround. It is no longer clear to me
why this was necessary. Deleting the patch restores the upstream
behaviour of the collected for the smart plugin. I have tested it and on
my system the hard disk to be monitored is recognised.
root@system ~ # cat /sys/class/block/sda/uevent
MAJOR=8
MINOR=0
DEVNAME=sda
DEVTYPE=disk
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Fixes:
Packages 'bsdtar' and 'bsdtar-noopenssl' do not conflict while providing same file: /usr/bin/bsdtar
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
This change added the latest upstream changes since version 1.0.0.
When using the smart plugin from collectd, there are problems with the
function udev_enumerate_scan_devices. This function is blocked and no
longer returns. Backporting the latest fixes from libudev-zero solves
the problem.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2.10.1:
- [Bug]: (CVE-2022-24302) Creation of new private key files using
PKey subclasses was subject to a race condition between file creation
& mode modification, which could be exploited by an attacker with
knowledge of where the Paramiko-using code would write out such
files.
- This has been patched by using os.open and os.fdopen to ensure new
files are opened with the correct mode immediately. We’ve left the
subsequent explicit chmod in place to minimize any possible
disruption, though it may get removed in future backwards-
incompatible updates.
- Thanks to Jan Schejbal for the report & feedback on the solution,
and to Jeremy Katz at Tidelift for coordinating the disclosure.
2.10.0:
- [Feature] Add support for OpenSSH’s Windows agent as a fallback
when Putty/WinPageant isn’t available or functional. Reported by
@benj56 with patches/PRs from @lewgordon and Patrick Spendrin.
- [Feature] Add support for the %C token when parsing SSH config
files. Foundational PR submitted by @jbrand42.
- [Bug] Significantly speed up low-level read/write actions on
SFTPFile objects by using bytearray/memoryview. This is unlikely to
change anything for users of the higher level methods like
SFTPClient.get or SFTPClient.getfo, but users of SFTPClient.open will
likely see orders of magnitude improvements for files larger than a
few megabytes in size.
- Thanks to @jkji for the original report and to Sevastian Tchernov
for the patch.
- [Support] Add six explicitly to install-requires; it snuck into
active use at some point but has only been indicated by transitive
dependency on bcrypt until they somewhat-recently dropped it. This
will be short-lived until we drop Python 2 support. Thanks to
Sondre Lillebø Gundersen for catch & patch.
Signed-off-by: Javier Marcet <javier@marcet.info>
As per the discussion in PR #18047, split the MTR package into
two, one with jansson enabled for JSON output, and one without.
This commit also bumps the version to 0.95. Since the MTR project
website does not seem to be updated with builds any longer, switch
to GitHub Codeload instead.
Also enable PKG_FIXUP:=autoreconf so that MTRs bootstrap.sh process
is executed properly.
Signed-off-by: Marc Egerton <marc@malloc.me>
* remove upstreamed gcc10 and cerrno patches
* disable SSO and OIDC as it needs Rust/Cargo support
Signed-off-by: Moritz Warning <moritzwarning@web.de>
What's Changed:
- use plain text progress when ansi=never is set by @ndeloof
- build full compose model from resources, then filter by services by
@ndeloof
- add run with dependencies e2e test by @glours
- add support for device_cgroup_rules by @ndeloof
- composeService to use dockerCli's In/Out/Err streams by @ndeloof
- fix generated YAML missing an "examples" section, and update
cli-docs-tool to v0.4.0 by @thaJeztah
Signed-off-by: Javier Marcet <javier@marcet.info>
- No need to explicitly state two times section and category since this is
already done in define Package/chicken-scheme/Default
- Also add TITLE to Default
- Add conflict between chicken-scheme-interpreter and
chicken-scheme-full
They both provide the same files:
/usr/lib/libchicken.so
/usr/lib/chicken/11/chicken.time.import.so
/usr/lib/chicken/11/chicken.fixnum.import.so
/usr/lib/chicken/11/chicken.internal.import.so
/usr/lib/chicken/11/chicken.tcp.import.so
/usr/lib/chicken/11/chicken.continuation.import.so
/usr/lib/chicken/11/chicken.port.import.so
/usr/lib/chicken/11/chicken.random.import.so
/usr/lib/chicken/11/chicken.compiler.user-pass.import.so
/usr/lib/chicken/11/chicken.process-context.import.so
/usr/lib/chicken/11/chicken.bitwise.import.so
/usr/lib/chicken/11/srfi-4.import.so
/usr/lib/chicken/11/chicken.load.import.so
/usr/lib/chicken/11/chicken.blob.import.so
/usr/lib/chicken/11/chicken.time.posix.import.so
/usr/lib/chicken/11/chicken.file.posix.import.so
/usr/lib/chicken/11/chicken.flonum.import.so
/usr/lib/chicken/11/chicken.condition.import.so
/usr/lib/chicken/11/chicken.pretty-print.import.so
/usr/lib/chicken/11/types.db
/usr/lib/chicken/11/chicken.foreign.import.so
/usr/lib/chicken/11/chicken.repl.import.so
/usr/lib/chicken/11/chicken.pathname.import.so
/usr/lib/chicken/11/chicken.sort.import.so
/usr/lib/chicken/11/chicken.keyword.import.so
/usr/lib/chicken/11/chicken.process.signal.import.so
/usr/lib/chicken/11/chicken.platform.import.so
/usr/lib/chicken/11/chicken.base.import.so
/usr/lib/chicken/11/chicken.syntax.import.so
/usr/lib/chicken/11/chicken.file.import.so
/usr/lib/chicken/11/chicken.memory.import.so
/usr/lib/chicken/11/chicken.gc.import.so
/usr/lib/chicken/11/chicken.io.import.so
/usr/lib/chicken/11/chicken.memory.representation.import.so
/usr/lib/chicken/11/chicken.process.import.so
/usr/lib/chicken/11/chicken.plist.import.so
/usr/lib/chicken/11/chicken.string.import.so
/usr/lib/chicken/11/chicken.errno.import.so
/usr/lib/chicken/11/chicken.format.import.so
/usr/lib/chicken/11/chicken.eval.import.so
/usr/lib/chicken/11/chicken.irregex.import.so
/usr/lib/chicken/11/chicken.process-context.posix.import.so
/usr/lib/chicken/11/chicken.read-syntax.import.so
/usr/lib/chicken/11/chicken.csi.import.so
/usr/lib/chicken/11/chicken.locative.import.so
/usr/bin/csi
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
I can't seem to see any package that needs it.
This was added for cryptography, since it was needed up to version 2.7
asn1-crypto doesn't have a user since commit 9d892e3cf8
So, remove it.
Abandoned packaged PR: https://github.com/openwrt/packages-abandoned/pull/23
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
- add missing runtime depency catatonit
- removed SELinux variant, add config option for it instead, I do not believe we need variant of EVERY SELinux support capable software
- add config option for iptables firewall setup in default cni network config, otherwise skip iptables part (part of nftables transition, use cni-plugins-nft for nftables fw support or better; forget about cni fw completely, instead use openwrt's own as that way your rules for containers do not disappear on firewall restart)
Signed-off-by: Oskari Rauta <oskari.rauta@gmail.com>
With the removal of Seafile, these library packages no longer have any
in-repo users. They will be imported into the abandoned packages
repo[1].
[1]: https://github.com/openwrt/packages-abandoned/pull/24
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
With the removal of Seafile, there are no more in-repo users of this
package. It will be imported into the abandoned packages repo[1].
[1]: https://github.com/openwrt/packages-abandoned/pull/25
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Enable AUTORELEASE in a separate commit so that the next commit can be
reverted without having to manually re-introduce it.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The configure option --enable-more-warnings and --without-udev are not
recognized by configure.
Buildlog:
configure: WARNING: unrecognized options: --disable-nls,
--enable-more-warnings, --without-udev
Therefore this unkown configure options are removed with this commit.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
The configure option --enable-more-warnings is not recognized by
configure.
Buildlog:
configure: WARNING: unrecognized options: --disable-nls, --enable-more-warnings
Therefore this configure option is removed with this commit.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Note that on 32-bit ARM with MUSL we don't have Unwind_GetIP() so
we need to disable backtraces.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Unless we're using "mktemp -u ..." (not recommended), it will
create the temp file as part of its safety checking. Thus you
should only create the name (file) if you're going to use it,
and always remove it if you have created it.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
If named is configured to not listen on any IPv6 interfaces,
then we should run 'nsupdate' with the '-4' argument.
Also:
* cleanup RFC-1918 address detection;
* don't generate PTR records for domain entries that aren't
RFC-1918 addresses or these will generate NOTAUTH failures;
We're assuming that we're doing DNS split-horizon and that
internal addresses aren't routable.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Daniel Golle
David Bauer
Michael Heimpold
Stan Grishin
Chris Osgood
Jeffery To
Noah Meyerhans
Rosen Penev
Nita Vesa
Tianling Shen
Philip Prindeville
Florian Eckert
Michal Vasilek
Josef Schlehofer
Christian Lachner
Javier Marcet
Marc Egerton
Moritz Warning
Alexandru Ardelean
Oskari Rauta
Stijn Tintel