It was requested as it can be useful under certain circumstances.
Disabled rpc_whitelist by default. Not only is there a firewall, but it denies access when IP address of the device is changed.
Added group support in UCI. Fixes cases where group does not match the user (nobody:nogroup).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
Considering that ipv6 NPT/NAT/NETMAP is done manually by user,
mwan3 can balance ipv6 interfaces as it does with ipv4.
Interface wan2 was renamed to wanb as wan2, wan3, ... will eventually
colide with OpenWrt with default wan6 interface when more than 6
interfaces are in use.
New interfaces, members for wan6 and wanb6 where created, both disabled
by default. Policies where adapted as well.
The option "family" is set respectively in each interface. When missing,
mwan3 assumes ipv4, that will fail when interface is IPv6 only.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Add missing globals config section with default values.
Without the correctly named section, mwan3 startup will fail with the error - Warning: mwan3 is global disabled. Usage: /etc/init.d/mwan3 start.
Compile: not required
Run tested: LEDE 17.01.04
Author-name: Rob White
Maintainer: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Rob White <rob@blue-wave.net>
Commit 384c2a8cfd added support for symlinking
net-snmp-config into $(STAGING_DIR)/usr/bin but forgot to install first
$(STAGING_DIR)/usr/bin resulting into a compile issue if
$(STAGING_DIR)/usr/bin is not yet present.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Allow specifying NTP servers, search domains, etc. by the administrator
directly specifying DHCP options (per interface, i.e. per pool).
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Setting a domain now results in 'option domain-name "xyzzy";'
being generated globally.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
The IPsec ip route table has the default number 220.
If mwan3 has more then 7 bits set (124 interfaces) then if mwan3 down is
executed the table is also cleared. To solve this set default max 7
bits in the mmx_mask for mwan3.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
xinetd.org has been defunct for a long time and it seems the main developer moved everything to GitHub.
Discovered with uscan.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
be35e54 Optimized by use ipset
2dcc126 Optimize kernel module code
08231b4 Remove url param of login api
bf7b435 Support compile kernel module on ubuntu for test
ffca07a Optimize kernel module
b03c757 Optimize code
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
Adjust the dependency from ip-full back to ip.
Returning back to "ip" is now possible as busybox does not provide
"ip" any more, making "ip" again reference to ip-tiny or ip-full.
Reference to discussion in #5747
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Bug: If DHCPv4 MAC are used to infer SLAAC and the forth position of
the subnet /64 is 0 (X:X:X:0::/64), then DNS records where malformed.
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
- Add domain_forward to permit designated domains to forward instead
of recurse as listed in resolve.conf.auto from DHCP WAN client
- Update rebind_protection and add rebind_interface to protect IP6
GLA locally just like RFC 1918 protection
- Rename trigger to trigger_interface with backwards compatability
- Update odhcpd script for efficiency handling many clients
Signed-off-by: Eric Luehrsen <ericluehrsen@hotmail.com>
We need always three of the firewall mask value for
* default routing table
* blackhole
* unreachable
the other will be used for the interfaces.
* If we have set the mmx_mask to max 0xFF00 (8 bit set) we could use max 252
interfaces.
* If we have set the mmx_mask to min 0x0E00 (3 bit set) we could use max 4
interfaces.
Only the ones are counting from the firewall mask value.
Minimal three firewall mask bit vaules must be set.
Maximal eight firewall mask bit vaules could be set.
Table overview mmx_mask value bits vs. max interfaces
mmx_mask value bits set 1 -> not usefull
mmx_mask value bits set 2 -> not usefull
mmx_mask value bits set 3 -> 4 Interfaces (mask example 0x0E)
mmx_mask value bits set 4 -> 12 Interfaces
mmx_mask value bits set 5 -> 28 Interfaces
mmx_mask value bits set 6 -> 60 Interfaces
mmx_mask value bits set 7 -> 124 Interfaces
mmx_mask value bits set 8 -> 252 Interfaces (mask example 0xFF)
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Add a new ACTIONs:
* connected ACTION is called once if mwan3track reach all configured track_ips
* disconnected ACTION is called once if mwan3track is unable to reach the track_ips
The connected/disconnected will called only by mwan3track in opposite
the ACTIONs ifup/ifdown will also be called by netifd.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
As it currently stands, the version of coova-chilli the packages feed
will not compile against 4fd8722056
I've quasi-backported (could not find a single commit which fixes these
particular issues) https://github.com/coova/coova-chilli 's formatting
on the impacted sections, and it compiles.
Once a new version is added to the feed this patch can likely be
dropped.
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
The code assumes pre-C99 inlining. This causes issues with GCC7 which assumes C11. Add std=gnu89 to restore proper behavior.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Changes since 2.8.2 as recorded in NEWS-2.8.2
- NSH implementation now conforms to latest draft (draft-ietf-sfc-nsh-28).
- Bug fixes
0006-adapt-ovs-scripts.patch was splited into two separate patches as
the original patch does not apply against 2.8.2 anymore. Other patches
are just re-numbered without actual function change
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
From the package description:
PageKite is a system for running publicly visible servers (generally
web servers) on machines without a direct connection to the Internet,
such as mobile devices or computers behind restrictive firewalls.
PageKite works around NAT, firewalls and IP-address limitations by
using a combination of tunnels and reverse proxies.
This package provides an implementation of the PageKite Protocol in C,
optimized for high-performance or embedded applications.
Signed-off-by: Karl Palsson <karlp@tweak.net.au>
* The mwan3 scripts sources ". /usr/share/libubox/jshn.sh"
* Mwan3 only works if ip-full is installed
Error -> "ip: invalid argument '0xfd00/0xff00' to 'fwmark'"
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert
Rosen Penev
Daniel Engberg
Dirk Brenken
Andy Walsh
Miroslav Lichvar
Luiz Angelo Daros de Luca
Hannu Nyman
Wojciech Dubowik
Jianhui Zhao
Rob White
Hans Dedecker
Philip Prindeville
Lucian Cristian
Othmar Truniger
Peter Wagner
Vincent Riou
Eric Luehrsen
Marty E. Plummer
Alexander Ryzhov
Yousong Zhou
Karl Palsson
Felix Fietkau