* properly install config file
* prevent smsd from starting right after installation to prevent loss of data
(make default device unavailable by turning configuration into comments)
* move init script to procd
* update init script priority to sane value
* log to syslog - at the moment via stdout and procd
this is a workaround to force smsd to stay in the foreground
* the init script can't do a modem reset anymore
use an alarmhandler script instead
* add a local patch to make all processes terminate if the main process dies
* take over the package as new maintainer
Signed-off-by: Harald Geyer <harald@ccbib.org>
scrapes bmx6 status and connected links.
example output:
bmx6_status{id="qMp-LibreMesh-1706",version="BMX6-0.1-alpha",address="fd66:66:66:a:6670:2ff:fe3e:9d28"} 1
bmx6_link_rxRate{target="UPC-CN-C6-E104-Alix",source="qMp-LibreMesh-1706",dev="wlan0-mesh_12"} 100
bmx6_link_txRate{target="UPC-CN-C6-E104-Alix",source="qMp-LibreMesh-1706",dev="wlan0-mesh_12"} 100
bmx6_link_rxRate{target="UPC-CN-C6-E104-Alix-Paul",source="qMp-LibreMesh-1706",dev="wlan1-adhoc_12"} 100
bmx6_link_txRate{target="UPC-CN-C6-E104-Alix-Paul",source="qMp-LibreMesh-1706",dev="wlan1-adhoc_12"} 100
bmx6_link_rxRate{target="UPC-CN-C6-E104-Turoffner",source="qMp-LibreMesh-1706",dev="wlan0-mesh_12"} 97
bmx6_link_txRate{target="UPC-CN-C6-E104-Turoffner",source="qMp-LibreMesh-1706",dev="wlan0-mesh_12"} 100
node_scrape_collector_duration_seconds{collector="bmx6"} 0.0025260448455811
node_scrape_collector_success{collector="bmx6"} 1
scrapes bmx7 status and connected links.
example output:
bmx7_status{id="C68791D2",revision="3a52f89",name="smpl-18f4ce",address="fd70:c687:91d2:8ab3:1a88:6b14:bad0:2b18"} 1
bmx7_cpu_usage 0.7
bmx7_mem_usage 3204000
bmx7_link_rxRate{target="F48239CD",dev="wlan0-mesh_13",source="C68791D2",name="smpl-07889a"} 54000
bmx7_link_txRate{target="F48239CD",dev="wlan0-mesh_13",source="C68791D2",name="smpl-07889a"} 52729
node_scrape_collector_duration_seconds{collector="bmx7"} 0.0020999908447266
node_scrape_collector_success{collector="bmx7"} 1
prometheus-node-exporter-lua: bmx6/7 netjson format
adds labels called source and target to links instead of only the target
previously called "id".
Retrieving all *links* from prometheus now makes it easier to create
a valid netjson(.org) graph.
It's not feasible to use *instance* as *source* as for instance likely
the name is used for dns, instead of the ID. Using the *name* instead of
*id* for netjson linking results in a bad graph when two devices have
the same (default) hostname.
Signed-off-by: Paul Spooren <spooren@informatik.uni-leipzig.de>
Supersedes #5173 and bumps the version to latest. Tested on ramips (mt7621).
Signed-off-by: Eugene Chekanskiy <echekanskiy@gmail.com>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
The collectd network plugin has the ability to sign and/or encrypt its
traffic, allowing secure interaction with other collectd instances. This
had been disabled due to issues with the collectd build system.
Fix up the configure parameters to work correctly and re-add the option.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
"sensors -s" needs to happen at boot-time so that any "set"
statements in sensors.conf file can take effect.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
This guarantees for the package feeds that
the mk files will always be available for all packages.
Will need to see about external-feed Python packages
a bit later.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Build depends refer to source package names, not binary package names.
In many cases, PKG_BUILD_DEPENDS simply duplicated runtime dependencies of
a source package's binary packages; as the corresponding source packages
are implicitly added as bulid dependencies, PKG_BUILD_DEPENDS can simply be
dropped in these cases. In the other cases, *_BUILD_DEPENDS is fixed to
refer to the correct source package name.
Dependency of mysql-server is adjusted from libncursesw to libncurses
(as libncursesw is a virtual package provided by libncurses), so the build
dependency on ncurses is emitted unconditionally.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Compile tested: brcm47xx, OpenWRT rb8edaf4
Run tested: brcm47xx, ASUS RT-N16, DESIGNATED DRIVER (Bleeding Edge, 5014x5)
Signed-off-by: Ben Smith <le.ben.smith@gmail.com>
This will add the rtl_433 package. The project can be found: https://github.com/merbanan/rtl_433
It is based on a recent trunk since the latest release is negligible.
Signed-off-by: Jasper Scholte <NightNL@outlook.com>
The URL git://dev.cloudtrax.com/ap51-flash.git is not the actual public
source repository URL for ap51-flash. It is not even accessible in the
moment. The official repository can now be found at github.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
This packages setserial, the standard Linux program for setting serial
device attributes such as baud rate, flow control etc.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
LXC requires newuidmap and newguidmap with SUID to run unprivileged
containers. This package should help users make sure they are available.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Remove igawk references as it's obsolete and not provided anymore.
Reported here: https://github.com/openwrt/packages/issues/5110
Fix package URL
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
nat_traffic is too verbose to be really useful by default
netstat is broken by default on OpenWrt/LEDE
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
Harald Geyer
Hannu Nyman
Paul Spooren
Jianhui Zhao
Rosen Penev
Andy Walsh
Vladimir Ulrich
Alif M. Ahmad
Jonathan McDowell
Philip Prindeville
Yousong Zhou
Lucian Cristian
Alexandru Ardelean
Daniel Engberg
Matthias Schiffer
Jeffery To
Daniel Golle
Álvaro Fernández Rojas
Ben Smith
Jasper Scholte
Nuno Goncalves
Maxim Storchak
Sven Eckelmann
Ted Hess
Jo-Philipp Wich
Rafał Miłecki
Alexander Couzens
Etienne Champetier