* limit number of /subscribe clients and queries per client
Add the following config variables (under [rpc] section):
* max_subscription_clients
* max_subscriptions_per_client
* timeout_broadcast_tx_commit
Fixes#2826
new HTTPClient interface for subscriptions
finalize HTTPClient events interface
remove EventSubscriber
fix data race
```
WARNING: DATA RACE
Read at 0x00c000a36060 by goroutine 129:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0
Previous write at 0x00c000a36060 by goroutine 132:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 129 (running) created at:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 132 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
==================
```
lite client works (tested manually)
godoc comments
httpclient: do not close the out channel
use TimeoutBroadcastTxCommit
no timeout for unsubscribe
but 1s Local (5s HTTP) timeout for resubscribe
format code
change Subscribe#out cap to 1
and replace config vars with RPCConfig
TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout
rpc: Context as first parameter to all functions
reformat code
fixes after my own review
fixes after Ethan's review
add test stubs
fix config.toml
* fixes after manual testing
- rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes
Tendermint resources (pubsub)
- rpc: better error in Subscribe and BroadcastTxCommit
- HTTPClient: do not resubscribe if err = ErrAlreadySubscribed
* fixes after Ismail's review
* Update rpc/grpc/grpc_test.go
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
Also
- init substructures to avoid panic in pb2tm.ConsensusParams
Before: if csp.Block is nil and we later try to access/write to it,
we'll panic.
After: if csp.Block is nil and we later try to access/write to it,
there'll be no panic.
When scaling and averaging is invoked, it is possible to have validators
with close priorities ending up with same priority. With the current code,
this makes it impossible to verify the priority orders before and after updates.
Fixes#3383
Refs #3262
This fixes two small bugs:
1) lite/dbprovider: return `ok` instead of true in parse* functions. It's weird that we're ignoring `ok` value before.
2) consensus/state: previously because of the shadowing we almost never output "Error with msg". Now we declare both `added` and `err` in the beginning of the function, so there's no shadowing.
Although the version we were pinning to is from Nov. 2016 there were no substantial changes:
jmhodges/levigo@2b8c778 added go-modules support (no code changes)
jmhodges/levigo@853d788 added a badge to the readme
closes#3381
We're pinning repos without releases because it's very easy to upgrade all the dependencies by executing dep ensure --upgrade. Instead, we should just never run this command directly, only dep ensure --upgrade <some repo>. And we can defend that in PRs.
Refs #3374
The problem with pinning to exact revisions: people who import Tendermint as a library (e.g. abci/types) are stuck with these revisions even though the code they import may not even use them.
https://tools.ietf.org/html/rfc6962#section-2.1
"The largest power of two less than the number of items" is actually correct!
For n > 1, let k be the largest power of two smaller than n (i.e.,
k < n <= 2k).
* fix failure in TestProposerFrequency
* Add test to check priority order after updates
* Changed applyRemovals() and removed Remove()
Changed applyRemovals() similar to applyUpdates()
Removed function Remove()
Updated comments
* review comments
* simplify applyRemovals and add more comments
* small correction in comment
* Fix check in test
* Fix priority check for centering, address review comments
* fix assert for priority centering
* review comments
* review comments
* cleanup and review comments
added upper limit check for validator voting power
moved check for empty validator set earlier
moved panic on potential negative set length in verifyRemovals
added more tests
* review comments
Fixes: #3378
* Add stats to cleveldb implementation
* update changelog
* remote TODO
also
- sort keys
- preallocate memory
* fix const initializer []string literal is not a constant
* add test
* make BlockTimeIota a consensus parameter, not a locally configurable option
Refs #2920
* make TimeIota int64 ms
Refs #2920
* update Gopkg.toml
* fixes after Ethan's review
* fix TestRemoteSignerProposalSigningFailed
* update changelog
Before we're using it to get a round state in tests. Now it can be done
by calling csX.GetRoundState. We will need to rewrite
TestStateSlashingPrevotes and TestStateSlashingPrecommits, which are
commented right now, to not rely on EventDataRoundState#RoundState
field.
Refs #1527
1."abci_query": rpcserver.NewRPCFunc(c.ABCIQuery, "path,data,prove")
"validators": rpcserver.NewRPCFunc(c.Validators, "height"),
the parameters and function do not match, cause index out of range error.
2. the prove of query is forced to be true, while default option is false.
3. fix the wrong key of merkle
When remove peer, block pool simple remove bpPeer,
but do not stop timer, that cause stopError for recorrected
peers. Stop timer when remove from pool.
* fix dirty data in peerset
startInitPeer before PeerSet add the peer,
once mconnection start and Receive of one
Reactor faild, will try to remove it from PeerSet
while PeerSet still not contain the peer. Fix
this by change the order.
* fix test FilterDuplicate
* fix start/stop race
* fix err
This issue is related to #3107
This is a first renaming/refactoring step before reworking and removing heartbeats.
As discussed with @Liamsi , we preferred to go for a couple of independent and separate PRs to simplify review work.
The changes:
Help to clarify the relation between the validator and remote signer endpoints
Differentiate between timeouts and deadlines
Prepare to encapsulate networking related code behind RemoteSigner in the next PR
My intention is to separate and encapsulate the "network related" code from the actual signer.
SignerRemote ---(uses/contains)--> SignerValidatorEndpoint <--(connects to)--> SignerServiceEndpoint ---> SignerService (future.. not here yet but would like to decouple too)
All reconnection/heartbeat/whatever code goes in the endpoints. Signer[Remote/Service] do not need to know about that.
I agree Endpoint may not be the perfect name. I tried to find something "Go-ish" enough. It is a common name in go-kit, kubernetes, etc.
Right now:
SignerValidatorEndpoint:
handles the listener
contains SignerRemote
Implements the PrivValidator interface
connects and sets a connection object in a contained SignerRemote
delegates PrivValidator some calls to SignerRemote which in turn uses the conn object that was set externally
SignerRemote:
Implements the PrivValidator interface
read/writes from a connection object directly
handles heartbeats
SignerServiceEndpoint:
Does most things in a single place
delegates to a PrivValidator IIRC.
* cleanup
* Refactoring step 1
* Refactoring step 2
* move messages to another file
* mark for future work / next steps
* mark deprecated classes in docs
* Fix linter problems
* additional linter fixes
* docs: explain create_empty_blocks configurations
Closes#3307
* Vagrantfile: install nodejs for docs
* update docs instructions
npm install does not make sense since there's no packages.json file
* explain broadcast_tx_* tx format
Closes#536
* docs: explain how transaction ordering works
Closes#2904
* bring in consensus parameters explained
* example for create_empty_blocks_interval
* bring in explanation from https://github.com/tendermint/tendermint/issues/2487#issuecomment-424899799
* link to formatting instead of duplicating info
* libs/common: TrapSignal accepts logger as a first parameter
and does not block anymore
* previously it was dumping "captured ..." msg to os.Stdout
* TrapSignal should not be responsible for blocking thread of execution
Refs #3238
* exit with zero (0) code upon receiving SIGTERM/SIGINT
Refs #3238
* fix formatting in docs/app-dev/abci-cli.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* fix formatting in docs/app-dev/abci-cli.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* bound mempool memory usage
Closes#3079
* rename SizeBytes to TxsTotalBytes
and other small fixes after Zarko's review
* rename MaxBytes to MaxTxsTotalBytes
* make ErrMempoolIsFull more informative
* expose mempool's txs_total_bytes via RPC
* test full response
* fixes after Ethan's review
* config: rename mempool.size to mempool.max_txs
https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004
* test more cases
https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532
* simplify test
* Revert "config: rename mempool.size to mempool.max_txs"
This reverts commit 39bfa36961.
* rename count back to n_txs
to make a change non-breaking
* rename max_txs_total_bytes to max_txs_bytes
* format code
* fix TestWALPeriodicSync
The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.
* Apply suggestions from code review
* reject the shared secret if is all zeros in case the blacklist was not
sufficient
* Add test that verifies lower order pub-keys are rejected at the DH step
* Update changelog
* fix typo in test-comment
* green pubsub tests :OK:
* get rid of clientToQueryMap
* Subscribe and SubscribeUnbuffered
* start adapting other pkgs to new pubsub
* nope
* rename MsgAndTags to Message
* remove TagMap
it does not bring any additional benefits
* bring back EventSubscriber
* fix test
* fix data race in TestStartNextHeightCorrectly
```
Write at 0x00c0001c7418 by goroutine 796:
github.com/tendermint/tendermint/consensus.TestStartNextHeightCorrectly()
/go/src/github.com/tendermint/tendermint/consensus/state_test.go:1296 +0xad
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Previous read at 0x00c0001c7418 by goroutine 858:
github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote()
/go/src/github.com/tendermint/tendermint/consensus/state.go:1631 +0x1366
github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote()
/go/src/github.com/tendermint/tendermint/consensus/state.go:1476 +0x8f
github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg()
/go/src/github.com/tendermint/tendermint/consensus/state.go:667 +0xa1e
github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine()
/go/src/github.com/tendermint/tendermint/consensus/state.go:628 +0x794
Goroutine 796 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
testing.runTests.func1()
/usr/local/go/src/testing/testing.go:1119 +0xa8
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
testing.runTests()
/usr/local/go/src/testing/testing.go:1117 +0x4ee
testing.(*M).Run()
/usr/local/go/src/testing/testing.go:1034 +0x2ee
main.main()
_testmain.go:214 +0x332
Goroutine 858 (running) created at:
github.com/tendermint/tendermint/consensus.(*ConsensusState).startRoutines()
/go/src/github.com/tendermint/tendermint/consensus/state.go:334 +0x221
github.com/tendermint/tendermint/consensus.startTestRound()
/go/src/github.com/tendermint/tendermint/consensus/common_test.go:122 +0x63
github.com/tendermint/tendermint/consensus.TestStateFullRound1()
/go/src/github.com/tendermint/tendermint/consensus/state_test.go:255 +0x397
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
```
* fixes after my own review
* fix formatting
* wait 100ms before kicking a subscriber out
+ a test for indexer_service
* fixes after my second review
* no timeout
* add changelog entries
* fix merge conflicts
* fix typos after Thane's review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* reformat code
* rewrite indexer service in the attempt to fix failing test
https://github.com/tendermint/tendermint/pull/3227/#issuecomment-462316527
* Revert "rewrite indexer service in the attempt to fix failing test"
This reverts commit 0d9107a098.
* another attempt to fix indexer
* fixes after Ethan's review
* use unbuffered channel when indexing transactions
Refs https://github.com/tendermint/tendermint/pull/3227#discussion_r258786716
* add a comment for EventBus#SubscribeUnbuffered
* format code
As per #3043, this adds a ticker to sync the WAL every 2s while the WAL is running.
* Flush WAL every 2s
This adds a ticker that flushes the WAL every 2s while the WAL is
running. This is related to #3043.
* Fix spelling
* Increase timeout to 2mins for slower build environments
* Make WAL sync interval configurable
* Add TODO to replace testChan with more comprehensive testBus
* Remove extraneous debug statement
* Remove testChan in favour of using system time
As per
https://github.com/tendermint/tendermint/pull/3300#discussion_r255886586,
this removes the `testChan` WAL member and replaces the approach with a
system time-oriented one. In this new approach, we keep track of the
system time at which each flush and periodic flush successfully
occurred.
The naming of the various functions is also updated here to be more
consistent with "flushing" as opposed to "sync'ing".
* Update naming convention and ensure lock for timestamp update
* Add Flush method as part of WAL interface
Adds a `Flush` method as part of the WAL interface to enforce the idea
that we can manually trigger a WAL flush from outside of the WAL. This
is employed in the consensus state management to flush the WAL prior to
signing votes/proposals, as per https://github.com/tendermint/tendermint/issues/3043#issuecomment-453853630
* Update CHANGELOG_PENDING
* Remove mutex approach and replace with DI
The dependency injection approach to dealing with testing concerns could
allow similar effects to some kind of "testing bus"-based approach. This
commit introduces an example of this, where instead of relying on
(potentially fragile) timing of things between the code and the test, we
inject code into the function under test that can signal the test
through a channel.
This allows us to avoid the `time.Sleep()`-based approach previously
employed.
* Update comment on WAL flushing during vote signing
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Simplify flush interval definition
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Expand commentary on WAL disk flushing
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Add broken test to illustrate WAL sync test problem
Removes test-related state (dependency injection code) from the WAL data
structure and adds test code to illustrate the problem with using
`WALGenerateNBlocks` and `wal.SearchForEndHeight` to test periodic
sync'ing.
* Fix test error messages
* Use WAL group buffer size to check for flush
A function is added to `libs/autofile/group.go#Group` in order to return
the size of the buffered data (i.e. data that has not yet been flushed
to disk). The test now checks that, prior to a `time.Sleep`, the group
buffer has data in it. After the `time.Sleep` (during which time the
periodic flush should have been called), the buffer should be empty.
* Remove config root dir removal from #3291
* Add godoc for NewWAL mentioning periodic sync
ref: [#3010 (comment)](https://github.com/tendermint/tendermint/issues/3010#issuecomment-464287627)
> I tried searching for code where we authenticate a peer against its NetAddress.ID and couldn't find it. I don't see a reason to switch to Noise, but a need to ensure that the node's ID is authenticated e.g. after dialing from the address book.
* p2p: check secret conn id matches dialed id
* Fix all p2p tests & make code compile
* add simple test for dialing with wrong ID
* update changelog
* address review comments
* yet another place where to use IDAddressString and fix
testSetupMultiplexTransport
* changelog: use issue number instead of PR number
* follow up to #3291
- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()
* cmd/show_validator: wrap err to make it more clear
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
Anton Kaliaev
srmo
Anca Zamfir
Ethan Buchman
Yumin Xia
mircea-c
Ismail Khoffi
YOSHIDA Masanori
Silas Davis
Jack Zampolin
zjubfd
Sven-Hendrik Haase
Juan Leni
Daniil Lashin
Thane Thomson
Alessio Treglia