small typo

A few notes:

- this is not all the deletion that we can do, but this is the most
  "simple" case: it leaves in shims, and there's some trivial
  additional cleanup to the transport that can happen but that
  requires writing more code, and I wanted this to be easy to review
  above all else.
  
- This should land *after* we cut the branch for 0.35, but I'm
  anticipating that to happen soon, and I wanted to run this through
  CI.

## Description

- Add deprecated to config values in toml
- update config in configuration doc
- explain how to set up a node with the new network

- add sentence about not needing to fork tendermint for built-in tutorial
 - closes #6865 
- add note to use a released version of tendermint with the tutorials. This is to avoid unknown issues prior to a release.

The 0.35 release cycle renamed the 'fastsync' functionality to 'blocksync'. This change brings the configuration parameters in line with that change. Namely, it updates the configuration file `[fastsync]` field to be `[blocksync]` and changes the command line flag and config file parameters `--fast-sync` and `fast-sync` to `--enable-block-sync` and `enable-block-sync` respectively.

Error messages were added to help users encountering these changes be able to quickly make the needed update to their files/scripts.

When using the old command line argument for fast-sync, the following is printed

```
./build/tendermint start --proxy-app=kvstore --consensus.create-empty-blocks=false --fast-sync=false
ERROR: invalid argument "false" for "--fast-sync" flag: --fast-sync has been deprecated, please use --enable-block-sync
```

When using one of the old config file parameters, the following is printed:
```
./build/tendermint start --proxy-app=kvstore --consensus.create-empty-blocks=false
ERROR: error in config file: a configuration parameter named 'fast-sync' was found in the configuration file. The 'fast-sync' parameter has been renamed to 'enable-block-sync', please update the 'fast-sync' field in your configuration file to 'enable-block-sync'
```

This reverts commit 167fa738a3.

## Description

Update for logging changes

Co-authored-by: dongsam <dongsamb@gmail.com>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>

## Description

changes requested in https://github.com/tendermint/tendermint/pull/6035 but the bot merged the PR prior to applying them

## Description

- add note to recommend setting external address

## Description

add section on configuring log levels

Closes: #XXX

Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>

@p4u from vocdoni.io reported that the mempool might behave incorrectly under a
high load. The consequences can range from pauses between blocks to the peers
disconnecting from this node.

My current theory is that the flowrate lib we're using to control flow
(multiplex over a single TCP connection) was not designed w/ large blobs
(1MB batch of txs) in mind.

I've tried decreasing the Mempool reactor priority, but that did not
have any visible effect. What actually worked is adding a time.Sleep
into mempool.Reactor#broadcastTxRoutine after an each successful send ==
manual control flow of sort.

As a temporary remedy (until the mempool package
is refactored), the max-batch-bytes was disabled. Transactions will be sent
one by one without batching

Closes #5796

When set to true, an invalid transaction will be kept in the cache (this may help some applications to protect against spam).

NOTE: this is a temporary config option. The more correct solution would be to add a TTL to each transaction (i.e. CheckTx may return a TTL in ResponseCheckTx).

Closes: #5751

## Description

- separate docs related to running nodes into the nodes dir. 
- keep old files but dont display them
- bring over debugging like a pro blog

Closes: #XXX

## Description

Add information on p2p settings in documentation 

Closes: #XXX

Closes #625

also, document consensus parameters.
https://forum.cosmos.network/t/consensus-timeouts-explained/1421

Closes #4489

* config: rename prof_laddr to pprof_laddr and move it to rpc

also, remove `/unsafe_start_cpu_profiler`, `/unsafe_stop_cpu_profiler`
and `/unsafe_write_heap_profile` in favor of pprof server functionality.

Closes #5303

* update changelog

* log start

Implementation spec of Double Signing Risk Reduction [ADR-51](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-051-double-signing-risk-reduction.md) by B-Harvest
- Add `DoubleSignCheckHeight` config variable to ConsensusConfig for "How many blocks looks back to check existence of the node's consensus votes when before joining consensus"
- Add `consensus.double_sign_check_height` to `config.toml` and `tendermint node` as flag for set `DoubleSignCheckHeight`
- Set default `consensus.double_sign_check_height` to `0`  ( it could be adjustable in this PR, disable when 0  )

Refs

- [ADR-51](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-051-double-signing-risk-reduction.md)
- [https://github.com/tendermint/tendermint/issues/4059](https://github.com/tendermint/tendermint/issues/4059)
- [https://github.com/tendermint/tendermint/pull/4262](https://github.com/tendermint/tendermint/pull/4262)

## Description

Updates to various sections of docs. 
Fix docs deployment

Closes: #XXX

* db: add support for badgerdb

* add badgerdb comment for Config.DBBackend

## Description

migration of blockchain reactors to protobuf

Closes: #XXX

This PR removes lite & renames lite2 to light throughout the repo

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

Closes: #4944

Closes #3831

The support for rocksdb was added a while back in
https://github.com/tendermint/tm-db/pull/12. This commit merely updates
the documentation.

* Rename Tag(s) to Event(s)

- tag was replaced with event, but in some places it still mentions tag, would be easier to understand if we tried to replace it with event to not confuse people.

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* more  changes from tag -> event

* rename events to compositeKeys and keys

* Apply suggestions from code review

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* add minor documentation on how composite keys are constructed

* rename eventkey to compositekey

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* add changelog entry & add info to regenerate confid to changelog entry

* docs theme

* vuepress-theme-cosmos

* version bump

* changes to docs

* more code changes

* sidebar order fix

* moar changes

* fixed dev sessions title

* fixed dev sessions title, again

* specs should show up in sidebar

* contents cards

* version bump

* sidebar, rpc

* version bump

* custom footer and super naive search

* version

* minor change to vuepress

* move swagger file

* pre and post scripts

* build

* changed docs build process

* added deployment config

* updated versions file and added deployment filters

Fixes #4026

Fix #3868 (comment)

Commits:

* mempool: make `max_tx_bytes` configurable instead of `max_msg_bytes`

* update CHANGELOG_PENDING

* apply suggestions from code review

* config: move max_msg_bytes into mempool section

It was incorrectly placed in fastsync section during
4d7cd8055b (diff-092cdc48047eeb4c0bca311a2e1b8ae6)
merge.

Fixes #3868

* add changelog entry

* go routines in blockchain reactor

* Added reference to the go routine diagram

* Initial commit

* cleanup

* Undo testing_logger change, committed by mistake

* Fix the test loggers

* pulled some fsm code into pool.go

* added pool tests

* changes to the design

added block requests under peer

moved the request trigger in the reactor poolRoutine, triggered now by a ticker

in general moved everything required for making block requests smarter in the poolRoutine

added a simple map of heights to keep track of what will need to be requested next

added a few more tests

* send errors to FSM in a different channel than blocks

send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests

* more pool tests

* lint errors

* more tests

* more tests

* switch fast sync to new implementation

* fixed data race in tests

* cleanup

* finished fsm tests

* address golangci comments :)

* address golangci comments :)

* Added timeout on next block needed to advance

* updating docs and cleanup

* fix issue in test from previous cleanup

* cleanup

* Added termination scenarios, tests and more cleanup

* small fixes to adr, comments and cleanup

* Fix bug in sendRequest()

If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.

While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.

* remove bpPeer's didTimeout field

* Use distinct err codes for peer timeout and FSM timeouts

* Don't allow peers to update with lower height

* review comments from Ethan and Zarko

* some cleanup, renaming, comments

* Move block execution in separate goroutine

* Remove pool's numPending

* review comments

* fix lint, remove old blockchain reactor and duplicates in fsm tests

* small reorg around peer after review comments

* add the reactor spec

* verify block only once

* review comments

* change to int for max number of pending requests

* cleanup and godoc

* Add configuration flag fast sync version

* golangci fixes

* fix config template

* move both reactor versions under blockchain

* cleanup, golint, renaming stuff

* updated documentation, fixed more golint warnings

* integrate with behavior package

* sync with master

* gofmt

* add changelog_pending entry

* move to improvments

* suggestion to changelog entry

* mempool: make max_msg_bytes configurable

* apply suggestions from code review

* update changelog pending

* apply suggestions from code review again

* rpc: make max_body_bytes and max_header_bytes configurable

* update changelog pending

* Quick link fixes throughout docs and repo

- used markdown link tester to find broken links

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* minor change remove slash

* pr comments

* minor fix

* remove docker.develop

* remove master tag

* Add blockchain reactor refactor ADR

* docs: Correct markdown and go syntax in adr-036

* Update docs/architecture/adr-036-blockchain-reactor-refactor.md

Co-Authored-By: milosevic <zarko@interchain.io>

* Add comments and address reviewer comments

* Improve formating

* Small improvements

* adr-036 -> adr-040

* libs/db: conditional compilation

For cleveldb: go build -tags cleveldb
For boltdb: go build -tags boltdb

Fixes #3611

* document db_backend param better

* remove deprecated LevelDBBackend

* update changelog

* add missing lines

* add new line

* fix TestRemoteDB

* add a line about boltdb tag

* Revert "remove deprecated LevelDBBackend"

This reverts commit 1aa85453f7.

* make PR non breaking

* change DEPRECATED label format

https://stackoverflow.com/a/36360323/820520

Refs #3419

* Make sure config.TimeoutBroadcastTxCommit < rpcserver.WriteTimeout()

* remove redundant comment

* libs/rpc/http_server: move Read/WriteTimeout into Config

* increase defaults for read/write timeouts

Based on this article
https://www.digitalocean.com/community/tutorials/how-to-optimize-nginx-configuration

* WriteTimeout should be larger than TimeoutBroadcastTxCommit

* set a deadline for subscribing to txs

* extract duration into const

* add two changelog entries

* Update CHANGELOG_PENDING.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* Update CHANGELOG_PENDING.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* 12 -> 10

* changelog

* changelog

* limit number of /subscribe clients and queries per client

Add the following config variables (under [rpc] section):
  * max_subscription_clients
  * max_subscriptions_per_client
  * timeout_broadcast_tx_commit

Fixes #2826

new HTTPClient interface for subscriptions

finalize HTTPClient events interface

remove EventSubscriber

fix data race

```
WARNING: DATA RACE
Read at 0x00c000a36060 by goroutine 129:
  github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1()
      /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0

Previous write at 0x00c000a36060 by goroutine 132:
  github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
      /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0
  github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
      /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
  github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
      /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
  testing.tRunner()
      /usr/local/go/src/testing/testing.go:827 +0x162

Goroutine 129 (running) created at:
  github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
      /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7
  github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
      /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
  github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
      /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
  testing.tRunner()
      /usr/local/go/src/testing/testing.go:827 +0x162

Goroutine 132 (running) created at:
  testing.(*T).Run()
      /usr/local/go/src/testing/testing.go:878 +0x659
  github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync()
      /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186
  testing.tRunner()
      /usr/local/go/src/testing/testing.go:827 +0x162
==================
```

lite client works (tested manually)

godoc comments

httpclient: do not close the out channel

use TimeoutBroadcastTxCommit

no timeout for unsubscribe

but 1s Local (5s HTTP) timeout for resubscribe

format code

change Subscribe#out cap to 1

and replace config vars with RPCConfig

TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout

rpc: Context as first parameter to all functions

reformat code

fixes after my own review

fixes after Ethan's review

add test stubs

fix config.toml

* fixes after manual testing

- rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes
Tendermint resources (pubsub)
- rpc: better error in Subscribe and BroadcastTxCommit
- HTTPClient: do not resubscribe if err = ErrAlreadySubscribed

* fixes after Ismail's review

* Update rpc/grpc/grpc_test.go

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

* docs: explain create_empty_blocks configurations

Closes #3307

* Vagrantfile: install nodejs for docs

* update docs instructions

npm install does not make sense since there's no packages.json file

* explain broadcast_tx_* tx format

Closes #536

* docs: explain how transaction ordering works

Closes #2904

* bring in consensus parameters explained

* example for create_empty_blocks_interval

* bring in explanation from https://github.com/tendermint/tendermint/issues/2487#issuecomment-424899799

* link to formatting instead of duplicating info

* bound mempool memory usage

Closes #3079

* rename SizeBytes to TxsTotalBytes

and other small fixes after Zarko's review

* rename MaxBytes to MaxTxsTotalBytes

* make ErrMempoolIsFull more informative

* expose mempool's txs_total_bytes via RPC

* test full response

* fixes after Ethan's review

* config: rename mempool.size to mempool.max_txs

https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004

* test more cases

https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532

* simplify test

* Revert "config: rename mempool.size to mempool.max_txs"

This reverts commit 39bfa36961.

* rename count back to n_txs

to make a change non-breaking

* rename max_txs_total_bytes to max_txs_bytes

* format code

* fix TestWALPeriodicSync

The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.

* Apply suggestions from code review