@p4u from vocdoni.io reported that the mempool might behave incorrectly under a
high load. The consequences can range from pauses between blocks to the peers
disconnecting from this node.
My current theory is that the flowrate lib we're using to control flow
(multiplex over a single TCP connection) was not designed w/ large blobs
(1MB batch of txs) in mind.
I've tried decreasing the Mempool reactor priority, but that did not
have any visible effect. What actually worked is adding a time.Sleep
into mempool.Reactor#broadcastTxRoutine after an each successful send ==
manual control flow of sort.
As a temporary remedy (until the mempool package
is refactored), the max-batch-bytes was disabled. Transactions will be sent
one by one without batching
Closes#5796
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
## Description
This PR wraps the stdlib sync.(RW)Mutex & godeadlock.(RW)Mutex. This enables using go-deadlock via a build flag instead of using sed to replace sync with godeadlock in all files
Closes: #3242
## Description
To provide the ability to add more message types without needing to cause a breaking change the mempool message was migrated to a oneof.
Closes: #XXX
* proto: move mempool to proto
- changes according to moving the mempool reactor to proto
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
Closes: #2883
to prevent malicious nodes from sending us large messages (~21MB, which
is the default `RecvMessageCapacity`)
This allows us to remove unnecessary `maxMsgSize` check in `decodeMsg`. Since each channel has a msg capacity set to `maxMsgSize`, there's no need to check it again in `decodeMsg`.
Closes#1503
Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.
* Include sender when logging rejected txns
* Log as peerID to be consistent with other log messages
* Updated CHANGELOG_PENDING
* Handle nil source
* Updated PR link in CHANGELOG_PENDING
* Renamed TxInfo.SenderAddress and peerAddress til PeerFullID
* Renamed PeerFullID to PeerP2PID
* Forgot to rename a couple of references
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
* mempool: add a safety check, write tests for mempoolIDs
and document 65536 limit in the mempool reactor spec
follow-up to https://github.com/tendermint/tendermint/pull/2778
* rename the test
* fixes after Ismail's review
Refs #3306, irisnet@fdbb676
I ran an irishub validator. After the validator node ran several days, I dump the whole goroutine stack. I found that there were hundreds of broadcastTxRoutine. However, the connected peer quantity was less than 30. So I belive that there must be broadcastTxRoutine leakage issue.
According to my analysis, I think the root cause of this issue locate in below code:
select {
case <-next.NextWaitChan():
// see the start of the for loop for nil check
next = next.Next()
case <-peer.Quit():
return
case <-memR.Quit():
return
}
As we know, if multiple paths are avaliable in the same time, then a random path will be selected. Suppose that next.NextWaitChan() and peer.Quit() are both avaliable, and next.NextWaitChan() is chosen.
// send memTx
msg := &TxMessage{Tx: memTx.tx}
success := peer.Send(MempoolChannel, cdc.MustMarshalBinaryBare(msg))
if !success {
time.Sleep(peerCatchupSleepIntervalMS * time.Millisecond)
continue
}
Then next will be non-empty and the peer send operation won't be success. As a result, this go routine will be track into infinite loop and won't be released.
My proposal is to check peer.Quit() and memR.Quit() in every loop no matter whether next is nil.
Closes#1798
This is done by making every mempool tx maintain a list of peers who its received the tx from. Instead of using the 20byte peer ID, it instead uses a local map from peerID to uint16 counter, so every peer adds 2 bytes. (Word aligned to probably make it 8 bytes)
This also required resetting the callback function on every CheckTx. This likely has performance ramifications for instruction caching. The actual setting operation isn't costly with the removal of defers in this PR.
* Make the mempool not gossip txs back to peers its received it from
* Fix adversarial memleak
* Don't break interface
* Update changelog
* Forgot to add a mtx
* forgot a mutex
* Update mempool/reactor.go
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Update mempool/mempool.go
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Use unknown peer ID
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* fix compilation
* use next wait chan logic when skipping
* Minor fixes
* Add TxInfo
* Add reverse map
* Make activeID's auto-reserve 0
* 0 -> UnknownPeerID
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Switch to making the normal case set a callback on the reqres object
The recheck case is still done via the global callback, and stats
are also set via global callback
* fix merge conflict
* Addres comments
* Add cache tests
* add cache tests
* minor fixes
* update metrics in reqResCb and reformat code
* goimport -w mempool/reactor.go
* mempool: update memTx senders
I had to introduce txsMap for quick mempoolTx lookups.
* change senders type from []uint16 to sync.Map
Fixes DATA RACE:
```
Read at 0x00c0013fcd3a by goroutine 183:
github.com/tendermint/tendermint/mempool.(*MempoolReactor).broadcastTxRoutine()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:195 +0x3c7
Previous write at 0x00c0013fcd3a by D[2019-02-27|10:10:49.058] Read PacketMsg switch=3 peer=35bc1e3558c182927b31987eeff3feb3d58a0fc5@127.0.0.1
:46552 conn=MConn{pipe} packet="PacketMsg{30:2B06579D0A143EB78F3D3299DE8213A51D4E11FB05ACE4D6A14F T:1}"
goroutine 190:
github.com/tendermint/tendermint/mempool.(*Mempool).CheckTxWithInfo()
/go/src/github.com/tendermint/tendermint/mempool/mempool.go:387 +0xdc1
github.com/tendermint/tendermint/mempool.(*MempoolReactor).Receive()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:134 +0xb04
github.com/tendermint/tendermint/p2p.createMConnection.func1()
/go/src/github.com/tendermint/tendermint/p2p/peer.go:374 +0x25b
github.com/tendermint/tendermint/p2p/conn.(*MConnection).recvRoutine()
/go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:599 +0xcce
Goroutine 183 (running) created at:
D[2019-02-27|10:10:49.058] Send switch=2 peer=1efafad5443abeea4b7a8155218e4369525d987e@127.0.0.1:46193 channel=48 conn=MConn{pipe} m
sgBytes=2B06579D0A146194480ADAE00C2836ED7125FEE65C1D9DD51049
github.com/tendermint/tendermint/mempool.(*MempoolReactor).AddPeer()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:105 +0x1b1
github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
/go/src/github.com/tendermint/tendermint/p2p/switch.go:683 +0x13b
github.com/tendermint/tendermint/p2p.(*Switch).addPeer()
/go/src/github.com/tendermint/tendermint/p2p/switch.go:650 +0x585
github.com/tendermint/tendermint/p2p.(*Switch).addPeerWithConnection()
/go/src/github.com/tendermint/tendermint/p2p/test_util.go:145 +0x939
github.com/tendermint/tendermint/p2p.Connect2Switches.func2()
/go/src/github.com/tendermint/tendermint/p2p/test_util.go:109 +0x50
I[2019-02-27|10:10:49.058] Added good transaction validator=0 tx=43B4D1F0F03460BD262835C4AA560DB860CFBBE85BD02386D83DAC38C67B3AD7 res="&{CheckTx:gas_w
anted:1 }" height=0 total=375
Goroutine 190 (running) created at:
github.com/tendermint/tendermint/p2p/conn.(*MConnection).OnStart()
/go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:210 +0x313
github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
/go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
github.com/tendermint/tendermint/p2p.(*peer).OnStart()
/go/src/github.com/tendermint/tendermint/p2p/peer.go:179 +0x56
github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
/go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
github.com/tendermint/tendermint/p2p.(*peer).Start()
<autogenerated>:1 +0x43
github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
```
* explain the choice of a map DS for senders
* extract ids pool/mapper to a separate struct
* fix literal copies lock value from senders: sync.Map contains sync.Mutex
* use sync.Map#LoadOrStore instead of Load
* fixes after Ismail's review
* rename resCbNormal to resCbFirstTime
* use READ lock/unlock in ConsensusState#GetLastHeight
Refs #2721
* do not use defers when there's no need
* fix peer formatting (output its address instead of the pointer)
```
[54310]: E[11-02|11:59:39.851] Connection failed @ sendRoutine module=p2p peer=0xb78f00 conn=MConn{74.207.236.148:26656} err="pong timeout"
```
https://github.com/tendermint/tendermint/issues/2721#issuecomment-435326581
* panic if peer has no state
https://github.com/tendermint/tendermint/issues/2721#issuecomment-435347165
It's confusing that sometimes we check if peer has a state, but most of
the times we expect it to be there
1. add79700b5/mempool/reactor.go (L138)
2. add79700b5/rpc/core/consensus.go (L196) (edited)
I will change everything to always assume peer has a state and panic
otherwise
that should help identify issues earlier
* abci/localclient: extend lock on app callback
App callback should be protected by lock as well (note this was already
done for InitChainAsync, why not for others???). Otherwise, when we
execute the block, tx might come in and call the callback in the same
time we're updating it in execBlockOnProxyApp => DATA RACE
Fixes#2721
Consensus state is locked
```
goroutine 113333 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00180009c, 0xc0000c7e00)
/usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*RWMutex).RLock(0xc001800090)
/usr/local/go/src/sync/rwmutex.go:50 +0x4e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).GetRoundState(0xc001800000, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:218 +0x46
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).queryMaj23Routine(0xc0017def80, 0x11104a0, 0xc0072488f0, 0xc007248
9c0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:735 +0x16d
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).AddPeer
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:172 +0x236
```
because localClient is locked
```
goroutine 1899 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0xc0000cb500)
/usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
/usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).SetResponseCallback(0xc0001fb560, 0xc007868540)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:32 +0x33
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnConsensus).SetResponseCallback(0xc00002f750, 0xc007868540)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:57 +0x40
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.execBlockOnProxyApp(0x1104e20, 0xc002ca0ba0, 0x11092a0, 0xc00002f750, 0xc0001fe960, 0xc000bfc660, 0x110cfe0, 0xc000090330, 0xc9d12, 0xc000d9d5a0, ...)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:230 +0x1fd
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.(*BlockExecutor).ApplyBlock(0xc002c2a230, 0x7, 0x0, 0xc000eae880, 0x6, 0xc002e52c60, 0x16, 0x1f927, 0xc9d12, 0xc000d9d5a0, ...)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:96 +0x142
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).finalizeCommit(0xc001800000, 0x1f928)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1339 +0xa3e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryFinalizeCommit(0xc001800000, 0x1f928)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1270 +0x451
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit.func1(0xc001800000, 0x0, 0x1f928)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1218 +0x90
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit(0xc001800000, 0x1f928, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1247 +0x6b8
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xc003bc7ad0, 0xc003bc7b10)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1659 +0xbad
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xf1, 0xf1)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1517 +0x59
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg(0xc001800000, 0xd98200, 0xc0070dbed0, 0xc000cf4cc0, 0x28)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:660 +0x64b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine(0xc001800000, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:617 +0x670
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).OnStart
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:311 +0x132
```
tx comes in and CheckTx is executed right when we execute the block
```
goroutine 111044 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0x0)
/usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
/usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).CheckTxAsync(0xc0001fb0e0, 0xc002d94500, 0x13f, 0x280, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:85 +0x47
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnMempool).CheckTxAsync(0xc00002f720, 0xc002d94500, 0x13f, 0x280, 0x1)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:114 +0x51
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool.(*Mempool).CheckTx(0xc002d3a320, 0xc002d94500, 0x13f, 0x280, 0xc0072355f0, 0x0, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool/mempool.go:316 +0x17b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core.BroadcastTxSync(0xc002d94500, 0x13f, 0x280, 0x0, 0x0, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core/mempool.go:93 +0xb8
reflect.Value.call(0xd85560, 0x10326c0, 0x13, 0xec7b8b, 0x4, 0xc00663f180, 0x1, 0x1, 0xc00663f180, 0xc00663f188, ...)
/usr/local/go/src/reflect/value.go:447 +0x449
reflect.Value.Call(0xd85560, 0x10326c0, 0x13, 0xc00663f180, 0x1, 0x1, 0x0, 0x0, 0xc005cc9344)
/usr/local/go/src/reflect/value.go:308 +0xa4
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.makeHTTPHandler.func2(0x1102060, 0xc00663f100, 0xc0082d7900)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/handlers.go:269 +0x188
net/http.HandlerFunc.ServeHTTP(0xc002c81f20, 0x1102060, 0xc00663f100, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:1964 +0x44
net/http.(*ServeMux).ServeHTTP(0xc002c81b60, 0x1102060, 0xc00663f100, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:2361 +0x127
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.maxBytesHandler.ServeHTTP(0x10f8a40, 0xc002c81b60, 0xf4240, 0x1102060, 0xc00663f100, 0xc0082d7900)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:219 +0xcf
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.RecoverAndLogHandler.func1(0x1103220, 0xc00121e620, 0xc0082d7900)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:192 +0x394
net/http.HandlerFunc.ServeHTTP(0xc002c06ea0, 0x1103220, 0xc00121e620, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:1964 +0x44
net/http.serverHandler.ServeHTTP(0xc001a1aa90, 0x1103220, 0xc00121e620, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:2741 +0xab
net/http.(*conn).serve(0xc00785a3c0, 0x11041a0, 0xc000f844c0)
/usr/local/go/src/net/http/server.go:1847 +0x646
created by net/http.(*Server).Serve
/usr/local/go/src/net/http/server.go:2851 +0x2f5
```
* consensus: use read lock in Receive#VoteMessage
* use defer to unlock mutex because application might panic
* use defer in every method of the localClient
* add a changelog entry
* drain channels before Unsubscribe(All)
Read 55362ed766/libs/pubsub/pubsub.go (L13)
for the detailed explanation of the issue.
We'll need to fix it someday. Make sure to keep an eye on
https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-033-pubsub.md
* retry instead of panic when peer has no state in reactors other than consensus
in /dump_consensus_state RPC endpoint, skip a peer with no state
* rpc/core/mempool: simplify error messages
* rpc/core/mempool: use time.After instead of timer
also, do not log DeliverTx result (to be consistent with other memthods)
* unlock before calling the callback in reqRes#SetCallback
* updateToState exits early if the state isn't new, which happens after
* fast syncing. This results in not sending a NewRoundStep message. The mempool
* reactor depends on PeerState, which is updated by NewRoundStep
* messages. If the peer never sends a NewRoundStep, the mempool reactor
* will think they're behind, and never forward transactions. Note this
* only happens when `create_empty_blocks = false`, because otherwise
* peers will move through the consensus state and send a NewRoundStep
* for a new step soon anyways. Simple fix is just to send the
* NewRoundStep message during updateToState even if exit early
https://play.golang.org/p/gN21yO9IRs3
```
func waitWithCancel(f func() *clist.CElement, ctx context.Context) *clist.CElement {
el := make(chan *clist.CElement, 1)
select {
case el <- f():
```
will just run f() blockingly, so this doesn't change much in terms of behavior.
Leaking goroutine:
```
114 @ 0x42f2bc 0x42f3ae 0x440794 0x4403b9 0x468002 0x9fe32d 0x9ff78f 0xa025ed 0x45e571
```
Explanation:
it blocks on an empty clist forever. so unless theres txs coming in,
this go routine will just sit there, holding onto the peer too.
if we're constantly reconnecting to some peer, old instances are not
garbage collected, leading to memory leak.
Fixes https://github.com/cosmos/gaia/issues/108
Previous attempt https://github.com/tendermint/tendermint/pull/1156
comment out failing consensus tests for now
rewrite rpc httpclient to use new pubsub package
import pubsub as tmpubsub, query as tmquery
make event IDs constants
EventKey -> EventTypeKey
rename EventsPubsub to PubSub
mempool does not use pubsub
rename eventsSub to pubsub
new subscribe API
fix channel size issues and consensus tests bugs
refactor rpc client
add missing discardFromChan method
add mutex
rename pubsub to eventBus
remove IsRunning from WSRPCConnection interface (not needed)
add a comment in broadcastNewRoundStepsAndVotes
rename registerEventCallbacks to broadcastNewRoundStepsAndVotes
See https://dave.cheney.net/2014/03/19/channel-axioms
stop eventBuses after reactor tests
remove unnecessary Unsubscribe
return subscribe helper function
move discardFromChan to where it is used
subscribe now returns an err
this gives us ability to refuse to subscribe if pubsub is at its max
capacity.
use context for control overflow
cache queries
handle err when subscribing in replay_test
rename testClientID to testSubscriber
extract var
set channel buffer capacity to 1 in replay_file
fix byzantine_test
unsubscribe from single event, not all events
refactor httpclient to return events to appropriate channels
return failing testReplayCrashBeforeWriteVote test
fix TestValidatorSetChanges
refactor code a bit
fix testReplayCrashBeforeWriteVote
add comment
fix TestValidatorSetChanges
fixes from Bucky's review
update comment [ci skip]
test TxEventBuffer
update changelog
fix TestValidatorSetChanges (2nd attempt)
only do wg.Done when no errors
benchmark event bus
create pubsub server inside NewEventBus
only expose config params (later if needed)
set buffer capacity to 0 so we are not testing cache
new tx event format: key = "Tx" plus a tag {"tx.hash": XYZ}
This should allow to subscribe to all transactions! or a specific one
using a query: "tm.events.type = Tx and tx.hash = '013ABF99434...'"
use TimeoutCommit instead of afterPublishEventNewBlockTimeout
TimeoutCommit is the time a node waits after committing a block, before
it goes into the next height. So it will finish everything from the last
block, but then wait a bit. The idea is this gives it time to hear more
votes from other validators, to strengthen the commit it includes in the
next block. But it also gives it time to hear about new transactions.
waitForBlockWithUpdatedVals
rewrite WAL crash tests
Task:
test that we can recover from any WAL crash.
Solution:
the old tests were relying on event hub being run in the same thread (we
were injecting the private validator's last signature).
when considering a rewrite, we considered two possible solutions: write
a "fuzzy" testing system where WAL is crashing upon receiving a new
message, or inject failures and trigger them in tests using something
like https://github.com/coreos/gofail.
remove sleep
no cs.Lock around wal.Save
test different cases (empty block, non-empty block, ...)
comments
add comments
test 4 cases: empty block, non-empty block, non-empty block with smaller part size, many blocks
fixes as per Bucky's last review
reset subscriptions on UnsubscribeAll
use a simple counter to track message for which we panicked
also, set a smaller part size for all test cases
Anton Kaliaev
Tess Rinearson
Marko
Erik Grinaker
Jun Kimura
HaoyangLiu
Dev Ojha
Ethan Buchman
Zach Ramsay
Alexander Simmerl
Liamsi
Jae Kwon