blockchain/vX reactor priority was decreased because during the normal operation
(i.e. when the node is not fast syncing) blockchain priority can't be
the same as consensus reactor priority. Otherwise, it's theoretically possible to
slow down consensus by constantly requesting blocks from the node.
NOTE: ideally blockchain/vX reactor priority would be dynamic. e.g. when
the node is fast syncing, the priority is 10 (max), but when it's done
fast syncing - the priority gets decreased to 5 (only to serve blocks
for other nodes). But it's not possible now, therefore I decided to
focus on the normal operation (priority = 5).
evidence and consensus critical messages are more important than
the mempool ones, hence priorities are bumped by 1 (from 5 to 6).
statesync reactor priority was changed from 1 to 5 to be the same as
blockchain/vX priority.
Refs https://github.com/tendermint/tendermint/issues/5816
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
Before: scheduler receives psBlockProcessed event, but does not mark block as processed because peer timed out (or was removed for other reasons) and all associated blocks were rescheduled.
After: scheduler receives psBlockProcessed event and marks block as processed in any case (even if peer who provided this block errors).
Closes#5387
When a peer is stopped due to some network issue, the Reactor calls scheduler#handleRemovePeer, which removes the peer from the scheduler. BUT the peer stays in the processor, which sometimes could lead to "duplicate block enqueued by processor" panic WHEN the same block is requested by the scheduler again from a different peer. The solution is to return scPeerError, which will be propagated to the processor. The processor will clean up the blocks associated with the peer in purgePeer.
Closes#5513, #5517
## Description
This PR wraps the stdlib sync.(RW)Mutex & godeadlock.(RW)Mutex. This enables using go-deadlock via a build flag instead of using sed to replace sync with godeadlock in all files
Closes: #3242
- drop Height & Base from StatusRequest
It does not make sense nor it's used anywhere currently. Also, there
seem to be no trace of these fields in the ADR-40 (blockchain reactor
v2).
- change PacketMsg#EOF type from int32 to bool
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
Integrates the blockchain v2 reactor with state sync, fixes#4765. This mostly involves deferring fast syncing until after state sync completes. I tried a few different approaches, this was the least effort:
* `Reactor.events` is `nil` if no fast sync is in progress, in which case events are not dispatched - most importantly `AddPeer`.
* Accept status messages from unknown peers in the scheduler and register them as ready. On fast sync startup, broadcast status requests to all existing peers.
* When switching from state sync, first send a `bcResetState` message to the processor and scheduler to update their states - most importantly the initial block height.
* When fast sync completes, shut down event loop, scheduler and processor, and set `events` channel to `nil`.
Predominantly following the discussions regarding the conventions of using mocks, I have decided to revert back to the previous state where mocks were specialized and stored in the separate packages that used them rather then have a generalized mock in the evidence package.
This also was a problem as the state package were running tests too slow and occasionally timing out unnecessarily.
For the replay file I renamed mockEvidencePool to emptyEvidencePool to illustrate that it was intentionally like this and not give the impression that testing software was being used in production
Closes: #4786
The event loop uses a `select` on multiple channels. However, reading from a closed channel in Go always yields the channel's zero value. The processor and scheduler close their channels when done, and since these channels are always ready to receive, the event loop keeps spinning on them.
This changes `routine.terminate()` to not close the channel, and also removes `stopDemux` and instead uses `events` channel closure to signal event loop termination.
Fixes#4687.
Fixes#828. Adds state sync, as outlined in [ADR-053](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-053-state-sync-prototype.md). See related PRs in Cosmos SDK (https://github.com/cosmos/cosmos-sdk/pull/5803) and Gaia (https://github.com/cosmos/gaia/pull/327).
This is split out of the previous PR #4645, and branched off of the ABCI interface in #4704.
* Adds a new P2P reactor which exchanges snapshots with peers, and bootstraps an empty local node from remote snapshots when requested.
* Adds a new configuration section `[statesync]` that enables state sync and configures the light client. Also enables `statesync:info` logging by default.
* Integrates state sync into node startup. Does not support the v2 blockchain reactor, since it needs some reorganization to defer startup.
to prevent malicious nodes from sending us large messages (~21MB, which
is the default `RecvMessageCapacity`)
This allows us to remove unnecessary `maxMsgSize` check in `decodeMsg`. Since each channel has a msg capacity set to `maxMsgSize`, there's no need to check it again in `decodeMsg`.
Closes#1503
## Description
Fixes a bug where the reactor would broadcast a base with height=0.
______
For contributor use:
- [ ] Wrote tests
- [ ] Updated CHANGELOG_PENDING.md
- [ ] Linked to Github issue with discussion and accepted design OR link to spec that describes this work.
- [ ] Updated relevant documentation (`docs/`) and code comments
- [x] Re-reviewed `Files changed` in the Github PR explorer
<!-- < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < < ☺
v ✰ Thanks for creating a PR! ✰
v Before smashing the submit button please review the checkboxes.
v If a checkbox is n/a - please still include it but + a little note why
☺ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -->
Fixes an issue reported in https://github.com/tendermint/tendermint/issues/4595#issuecomment-612667441.
Not sure if this is sufficient to fully remove the reactor, but it fixes the immediate problem.
______
For contributor use:
- [x] Wrote tests
- [x] ~Updated CHANGELOG_PENDING.md~
- [x] Linked to Github issue with discussion and accepted design OR link to spec that describes this work.
- [x] ~Updated relevant documentation (`docs/`) and code comments~
- [x] Re-reviewed `Files changed` in the Github PR explorer
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* test functions take time.Now and other minor changes
* updated remaining test files
* Update validation_test.go
* fix typo
* go fmt
* import time
Co-authored-by: Marko <marbar3778@yahoo.com>
The work includes the reactor which ties together all the seperate routines involved in the design of the blockchain v2 refactor. This PR replaces #4067 which got far too large and messy after a failed attempt to rebase.
## Commits:
* Blockchainv 2 reactor:
+ I cleaner copy of the work done in #4067 which fell too far behind and was a nightmare to rebase.
+ The work includes the reactor which ties together all the seperate routines involved in the design of the blockchain v2 refactor.
* fixes after merge
* reorder iIO interface methodset
* change iO -> IO
* panic before send nil block
* rename switchToConsensus -> trySwitchToConsensus
* rename tdState -> tmState
* Update blockchain/v2/reactor.go
Co-Authored-By: Bot from GolangCI <42910462+golangcibot@users.noreply.github.com>
* remove peer when it sends a block unsolicited
* check for not ready in markReceived
* fix error
* fix the pcFinished event
* typo fix
* add documentation for processor fields
* simplify time.Since
* try and make the linter happy
* some doc updates
* fix channel diagram
* Update adr-043-blockchain-riri-org.md
* panic on nil switch
* liting fixes
* account for nil block in bBlockResponseMessage
* panic on duplicate block enqueued by processor
* linting
* goimport reactor_test.go
Co-authored-by: Bot from GolangCI <42910462+golangcibot@users.noreply.github.com>
Co-authored-by: Anca Zamfir <ancazamfir@users.noreply.github.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* Add processor prototype
* Change processor API
+ expose a simple `handle` function which mutates internal state
* schedule event handling
* rename schedule -> scheduler
* fill in handle function
* processor tests
* fix gofmt and ohter golangci issues
* scopelint var on range scope
* add check for short block received
* small test reorg
* ci fix changes
* go.mod revert
* some cleanup and review comments
* scheduler fixes and unit tests, also small processor changes.
changed scPeerPruned to include a list of pruned peers
touchPeer to check peer state and remove the blocks from blockStates if the peer removal causes the max peer height to be lower.
remove the block at sc.initHeight
changed peersInactiveSince, peersSlowerThan, getPeersAtHeight check peer state
prunablePeers to return a sorted list of peers
lastRate in markReceived() attempted to divide by 0, temp fix.
fixed allBlocksProcessed conditions
maxHeight() and minHeight() to return sc.initHeight if no ready peers present
make selectPeer() deterministic.
added handleBlockProcessError()
added termination cond. (sc.allBlocksProcessed()) to handleTryPrunePeer() and others.
changed pcBlockVerificationFailure to include peer of H+2 block along with the one for H+1
changed the processor to call purgePeer on block verification failure.
fixed processor tests
added scheduler tests.
* typo and ci fixes
* remove height from scBlockRequest, golangci fixes
* limit on blockState map, updated tests
* remove unused
* separate test for maxHeight(), used for sched. validation
* use Math.Min
* fix golangci
* Document the semantics of blockStates in the scheduler
* better docs
* distinguish between unknown and invalid blockstate
* Standardize peer filtering methods
* feedback
* s/getPeersAtHeight/getPeersAtHeightOrAbove
* small notes
* Update blockchain/v2/scheduler.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update comments based on feedback
* Add enum offset
* panic on nil block in processor
* remove unused max height calculation
* format shorter line
* Add processor prototype
* Change processor API
+ expose a simple `handle` function which mutates internal state
* processor tests
* fix gofmt and ohter golangci issues
* scopelint var on range scope
* add check for short block received
* fix formatting
* small test reorg
* ignore unused for now
* ci fix changes
* go.mod revert
Anton Kaliaev
Tess Rinearson
Marko
Callum Waters
Erik Grinaker
Shivani Joshi
Sean Braithwaite