While working on tendermint my colleague @jinmannwong fixed a few of the unit tests that we found to be flaky in our CI. We thought that you might find this useful, see below for comments.
## Description
partially cleanup in preparation for errcheck
i ignored a bunch of defer errors in tests but with the update to go 1.14 we can use `t.Cleanup(func() { if err := <>; err != nil {..}}` to cover those errors, I will do this in pr number two of enabling errcheck.
ref #5059
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
Predominantly following the discussions regarding the conventions of using mocks, I have decided to revert back to the previous state where mocks were specialized and stored in the separate packages that used them rather then have a generalized mock in the evidence package.
This also was a problem as the state package were running tests too slow and occasionally timing out unnecessarily.
For the replay file I renamed mockEvidencePool to emptyEvidencePool to illustrate that it was intentionally like this and not give the impression that testing software was being used in production
Closes: #4786
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* test functions take time.Now and other minor changes
* updated remaining test files
* Update validation_test.go
* fix typo
* go fmt
* import time
Co-authored-by: Marko <marbar3778@yahoo.com>
* types: change `Commit` to consist of just signatures
These are final changes towards removing votes from commit and leaving
only signatures (see ADR-25)
Fixes#1648
* bring back TestCommitToVoteSetWithVotesForAnotherBlockOrNilBlock
+ add absent flag to Vote to indicate that it's for another block
* encode nil votes as CommitSig with BlockIDFlagAbsent
+ make Commit#Precommits array of non-pointers
because precommit will never be nil
* add NewCommitSigAbsent and Absent() funcs
* uncomment validation in CommitSig#ValidateBasic
* add comments to ValidatorSet funcs
* add a changelog entry
* break instead of continue
continue does not make sense in these cases
* types: rename Commit#Precommits to Signatures
* swagger: fix /commit response
* swagger: change block_id_flag type
* fix merge conflicts
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* Pin range scope vars
* Don't disable scopelint
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=scopelint
Contributes to #3262
* Add test for bcBlockRequestMessage ValidateBasic method
* Add test for bcNoBlockResponseMessage ValidateBasic method
* Add test for bcStatusRequestMessage ValidateBasic method
* Add test for bcStatusResponseMessage ValidateBasic method
* Add blockchain v1 reactor ValidateBasic tests
* Add test for NewRoundStepMessage ValidateBasic method
* Add test for NewValidBlockMessage ValidateBasic method
* Test BlockParts Size
* Import cmn package
* Add test for ProposalPOLMessage ValidateBasic method
* Add test for BlockPartMessage ValidateBasic method
* Add test for HasVoteMessage ValidateBasic method
* Add test for VoteSetMaj23Message ValidateBasic method
* Add test for VoteSetBitsMessage ValidateBasic method
* Fix linter errors
* Improve readability
* Add test for BaseConfig ValidateBasic method
* Add test for RPCConfig ValidateBasic method
* Add test for P2PConfig ValidateBasic method
* Add test for MempoolConfig ValidateBasic method
* Add test for FastSyncConfig ValidateBasic method
* Add test for ConsensusConfig ValidateBasic method
* Add test for InstrumentationConfig ValidateBasic method
* Add test for BlockID ValidateBasic method
* Add test for SignedHeader ValidateBasic method
* Add test for MockGoodEvidence and MockBadEvidence ValidateBasic methods
* Remove debug logging
Co-Authored-By: Marko <marbar3778@yahoo.com>
* Update MempoolConfig field
* Test a single struct field at a time, for maintainability
Fixes#2740
* (1/2) of replace errors.go with github.com/pkg/errors
ref #3862
- step one in removing instances of errors.go in favor of github.com/pkg/errors
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* gofmt
* add in /store
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* Refactor signature of Application.CheckTx
* Refactor signature of Application.DeliverTx
* Refactor example variable names for clarity and consistency
* Rename method variables for consistency
* Rename method variables for consistency
* add a changelog entry
* update docs
## PR
This PR introduces a fundamental breaking change to the structure of ABCI response and tx tags and the way they're processed. Namely, the SDK can support more complex and aggregated events for distribution and slashing. In addition, block responses can include duplicate keys in events.
Implement new Event type. An event has a type and a list of KV pairs (ie. list-of-lists). Typical events may look like:
"rewards": [{"amount": "5000uatom", "validator": "...", "recipient": "..."}]
"sender": [{"address": "...", "balance": "100uatom"}]
The events are indexed by {even.type}.{even.attribute[i].key}/.... In this case a client would subscribe or query for rewards.recipient='...'
ABCI response types and related types now include Events []Event instead of Tags []cmn.KVPair.
PubSub logic now publishes/matches against map[string][]string instead of map[string]string to support duplicate keys in response events (from #1385). A match is successful if the value is found in the slice of strings.
closes: #1859closes: #2905
## Commits:
* Implement Event ABCI type and updates responses to use events
* Update messages_test.go
* Update kvstore.go
* Update event_bus.go
* Update subscription.go
* Update pubsub.go
* Update kvstore.go
* Update query logic to handle slice of strings in events
* Update Empty#Matches and unit tests
* Update pubsub logic
* Update EventBus#Publish
* Update kv tx indexer
* Update godocs
* Update ResultEvent to use slice of strings; update RPC
* Update more tests
* Update abci.md
* Check for key in validateAndStringifyEvents
* Fix KV indexer to skip empty keys
* Fix linting errors
* Update CHANGELOG_PENDING.md
* Update docs/spec/abci/abci.md
Co-Authored-By: Federico Kunze <31522760+fedekunze@users.noreply.github.com>
* Update abci/types/types.proto
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update docs/spec/abci/abci.md
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update libs/pubsub/query/query.go
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* Update match function to match if ANY value matches
* Implement TestSubscribeDuplicateKeys
* Update TestMatches to include multi-key test cases
* Update events.go
* Update Query interface godoc
* Update match godoc
* Add godoc for matchValue
* DRY-up tx indexing
* Return error from PublishWithEvents in EventBus#Publish
* Update PublishEventNewBlockHeader to return an error
* Fix build
* Update events doc in ABCI
* Update ABCI events godoc
* Implement TestEventBusPublishEventTxDuplicateKeys
* Update TestSubscribeDuplicateKeys to be table-driven
* Remove mod file
* Remove markdown from events godoc
* Implement TestTxSearchDeprecatedIndexing test
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* types.NewCommit
* use types.NewCommit everywhere
* fix log in unsafe_reset
* memoize height and round in constructor
* notes about deprecating toVote
* bring back memoizeHeightRound
Hlib Kanunnikov
Callum Waters
JayT106
Sam Kleinman
Erik Grinaker
Aleksandr Bezobchuk
Marko
n-hutton
Anton Kaliaev
Shivani Joshi
Phil Salant
Anca Zamfir
Thane Thomson
JamesRay
Alessio Treglia
Ethan Buchman