Migrates the `rpc` package to use new JSON encoder in #4955. Branched off of that PR.
Tests pass, but I haven't done any manual testing beyond that. This should be handled as part of broader 0.34 testing.
Closes#4603
Commands used (VIM):
```
:args `rg -l errors.Wrap`
:argdo normal @q | update
```
where q is a macros rewriting the `errors.Wrap` to `fmt.Errorf`.
Integrates the blockchain v2 reactor with state sync, fixes#4765. This mostly involves deferring fast syncing until after state sync completes. I tried a few different approaches, this was the least effort:
* `Reactor.events` is `nil` if no fast sync is in progress, in which case events are not dispatched - most importantly `AddPeer`.
* Accept status messages from unknown peers in the scheduler and register them as ready. On fast sync startup, broadcast status requests to all existing peers.
* When switching from state sync, first send a `bcResetState` message to the processor and scheduler to update their states - most importantly the initial block height.
* When fast sync completes, shut down event loop, scheduler and processor, and set `events` channel to `nil`.
Fixes#828. Adds state sync, as outlined in [ADR-053](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-053-state-sync-prototype.md). See related PRs in Cosmos SDK (https://github.com/cosmos/cosmos-sdk/pull/5803) and Gaia (https://github.com/cosmos/gaia/pull/327).
This is split out of the previous PR #4645, and branched off of the ABCI interface in #4704.
* Adds a new P2P reactor which exchanges snapshots with peers, and bootstraps an empty local node from remote snapshots when requested.
* Adds a new configuration section `[statesync]` that enables state sync and configures the light client. Also enables `statesync:info` logging by default.
* Integrates state sync into node startup. Does not support the v2 blockchain reactor, since it needs some reorganization to defer startup.
Closes: #4530
This PR contains logic for both submitting an evidence by the light client (lite2 package) and receiving it on the Tendermint side (/broadcast_evidence RPC and/or EvidenceReactor#Receive). Upon receiving the ConflictingHeadersEvidence (introduced by this PR), the Tendermint validates it, then breaks it down into smaller pieces (DuplicateVoteEvidence, LunaticValidatorEvidence, PhantomValidatorEvidence, PotentialAmnesiaEvidence). Afterwards, each piece of evidence is verified against the state of the full node and added to the pool, from which it's reaped upon block creation.
* rpc/client: do not pass height param if height ptr is nil
* rpc/core: validate incoming evidence!
* only accept ConflictingHeadersEvidence if one
of the headers is committed from this full node's perspective
This simplifies the code. Plus, if there are multiple forks, we'll
likely to receive multiple ConflictingHeadersEvidence anyway.
* swap CommitSig with Vote in LunaticValidatorEvidence
Vote is needed to validate signature
* no need to embed client
http is a provider and should not be used as a client
* blockchain: enable v2 to be set
- enable v2 to be set via config params
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* replace tab with space
* correctly spell usability
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* dep: update tm-db to 0.4.0
- update 0.4.0 as it is a breaking change and cannot be handled by depndabot
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more work towards error handling
* error and emtpy bytes handling
* work on tests
* add changelog entry, change some error handling
* address some pr comments
* panic in a few more places
* move error higher up
* redo some error handling
* fix some bz == nil to len(bz) == 0
* change statebytes
* libs/common: refactor libs common 3
- move nil.go into types folder and make private
- move service & baseservice out of common into service pkg
ref #4147
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add changelog entry
* Rename Tag(s) to Event(s)
- tag was replaced with event, but in some places it still mentions tag, would be easier to understand if we tried to replace it with event to not confuse people.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more changes from tag -> event
* rename events to compositeKeys and keys
* Apply suggestions from code review
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* add minor documentation on how composite keys are constructed
* rename eventkey to compositekey
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* add changelog entry & add info to regenerate confid to changelog entry
implementation spec of Improved Trusted Peering ADR-050 by B-Harvest
- add unconditional_peer_ids and persistent_peers_max_dial_period to config
- add unconditionalPeerIDs map to Switch struct
default config value of persistent_peers_max_dial_period is 0s(disabled)
Refs #4072, #4053
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* New lint version upgrade
- linter was upgraded
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* enable-a;; is deprecated
* minor change
* another try
* some more changes
* some more changes
* reenable prealloc
* add version till bot is fixed
This PR is related to #3107 and a continuation of #3351
It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction.
Given two hosts A and B:
Host A is listener/client
Host B is dialer/server (contains the secret key)
When A requires a signature, it needs to wait for B to dial in before it can issue a request.
A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect.
The original rationale behind this design was based on security.
Host B only allows outbound connections to a list of whitelisted hosts.
It is not possible to reach B unless B dials in. There are no listening/open ports in B.
This PR results in the following changes:
Refactors ping/heartbeat to avoid previously existing race conditions.
Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow.
Unifies and abstracts away the differences between unix and tcp sockets.
A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj)
The signer request handler (server side) is customizable to increase testability.
Updates and extends unit tests
A high level overview of the classes is as follows:
Transport (endpoints): The following classes take care of establishing a connection
SignerDialerEndpoint
SignerListeningEndpoint
SignerEndpoint groups common functionality (read/write/timeouts/etc.)
Signing (client/server): The following classes take care of exchanging request/responses
SignerClient
SignerServer
This PR also closes#3601
Commits:
* refactoring - work in progress
* reworking unit tests
* Encapsulating and fixing unit tests
* Improve tests
* Clean up
* Fix/improve unit tests
* clean up tests
* Improving service endpoint
* fixing unit test
* fix linter issues
* avoid invalid cache values (improve later?)
* complete implementation
* wip
* improved connection loop
* Improve reconnections + fixing unit tests
* addressing comments
* small formatting changes
* clean up
* Update node/node.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* check during initialization
* dropping connecting when writing fails
* removing break
* use t.log instead
* unifying and using cmn.GetFreePort()
* review fixes
* reordering and unifying drop connection
* closing instead of signalling
* refactored service loop
* removed superfluous brackets
* GetPubKey can return errors
* Revert "GetPubKey can return errors"
This reverts commit 68c06f19b4.
* adding entry to changelog
* Update CHANGELOG_PENDING.md
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* updating node.go
* review fixes
* fixes linter
* fixing unit test
* small fixes in comments
* addressing review comments
* addressing review comments 2
* reverting suggestion
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* do not expose brokenSignerDialerEndpoint
* clean up logging
* unifying methods
shorten test time
signer also drops
* reenabling pings
* improving testability + unit test
* fixing go fmt + unit test
* remove unused code
* Addressing review comments
* simplifying connection workflow
* fix linter/go import issue
* using base service quit
* updating comment
* Simplifying design + adjusting names
* fixing linter issues
* refactoring test harness + fixes
* Addressing review comments
* cleaning up
* adding additional error check
* node: allow replacing existing p2p.Reactor(s)
using [`CustomReactors`
option](https://godoc.org/github.com/tendermint/tendermint/node#CustomReactors).
Warning: beware of accidental name clashes. Here is the list of existing
reactors: MEMPOOL, BLOCKCHAIN, CONSENSUS, EVIDENCE, PEX.
* check the absence of "CUSTOM" prefix
* merge 2 tests
* add doc.go to node package
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* change invocation of NewNode across
* custom reactor name are prefixed with CUSTOM_
* upgate changelog pending
* improve comments
* node: refactor NewNode to use functional options
* node: fix a bug where `nil` is recorded as node's address
Solution
AddOurAddress when we know it
sw.NetAddress is nil in createAddrBookAndSetOnSwitch
it's set by n.transport.Listen function, which is called during start
Fixes#3716
* use addr instead of n.sw.NetAddress
* add both ExternalAddress and ListenAddress as our addresses
Fixes#3521
The function NewNetAddressStringWithOptionalID is from a time when peer
IDs were optional. They're not anymore. So this should be renamed to
NewNetAddressString and should ensure the ID is provided.
* update changelog
* use NewNetAddress in transport tests
* use NewNetAddress in TestTransportMultiplexAcceptMultiple
* Move GenesisDocProvider and DefaultGenesisDocProviderFunc
GenesisDocProvider, being a provider of *types.GenesisDoc, makes sense
to be part of the types package.
DefaultGenesisDocProviderFunc, which relies on *config.Config to produce
a types.GenesisDocProvider, makes sense being part of the config
package.
* Add aliases to avoid breaking node package API
* Revert to original structure
After discussion, it appears as though the best place for the relocated
structures is still in the node package. This means that for the v0.31.6
release and into the future, there will be no changes two these two
entities' APIs.
## Description
also
handle errors from DialPeersAsync
remove nil addr from log msg
fix TestPEXReactorDoesNotDisconnectFromPersistentPeerInSeedMode
This is a follow-up from
#3593 (review)
Fixes most of the #3617, except #3593 (comment)
## Commits
* rpc: /dial_peers: only mark peers as persistent if flag is on
also
- handle errors from DialPeersAsync
- remove nil addr from log msg
- fix TestPEXReactorDoesNotDisconnectFromPersistentPeerInSeedMode
This is a follow-up from
https://github.com/tendermint/tendermint/pull/3593#pullrequestreview-233556909
* remove a call to AddPersistentPeers
TestDialFail will trigger a reconnect
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
Erik Grinaker
Marko
Anton Kaliaev
Erik Grinaker
dongsamb
Phil Salant
Juan Leni
Anca Zamfir
Jun Kimura
Runchao Han
Thane Thomson