Predominantly following the discussions regarding the conventions of using mocks, I have decided to revert back to the previous state where mocks were specialized and stored in the separate packages that used them rather then have a generalized mock in the evidence package.
This also was a problem as the state package were running tests too slow and occasionally timing out unnecessarily.
For the replay file I renamed mockEvidencePool to emptyEvidencePool to illustrate that it was intentionally like this and not give the impression that testing software was being used in production
Closes: #4786
* Added BlockStore.DeleteBlock()
* Added initial block pruner prototype
* wip
* Added BlockStore.PruneBlocks()
* Added consensus setting for block pruning
* Added BlockStore base
* Error on replay if base does not have blocks
* Handle missing blocks when sending VoteSetMaj23Message
* Error message tweak
* Properly update blockstore state
* Error message fix again
* blockchain: ignore peer missing blocks
* Added FIXME
* Added test for block replay with truncated history
* Handle peer base in blockchain reactor
* Improved replay error handling
* Added tests for Store.PruneBlocks()
* Fix non-RPC handling of truncated block history
* Panic on missing block meta in needProofBlock()
* Updated changelog
* Handle truncated block history in RPC layer
* Added info about earliest block in /status RPC
* Reorder height and base in blockchain reactor messages
* Updated changelog
* Fix tests
* Appease linter
* Minor review fixes
* Non-empty BlockStores should always have base > 0
* Update code to assume base > 0 invariant
* Added blockstore tests for pruning to 0
* Make sure we don't prune below the current base
* Added BlockStore.Size()
* config: added retain_blocks recommendations
* Update v1 blockchain reactor to handle blockstore base
* Added state database pruning
* Propagate errors on missing validator sets
* Comment tweaks
* Improved error message
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option
* remove State.RetainHeight, return value instead
* fix minor issues
* rename pruneHeights() to pruneBlocks()
* noop to fix GitHub borkage
Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>
* format: add format cmd & goimport repo
- replaced format command
- added goimports to format command
- ran goimports
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* fix outliers & undo proto file changes
* test functions take time.Now and other minor changes
* updated remaining test files
* Update validation_test.go
* fix typo
* go fmt
* import time
Co-authored-by: Marko <marbar3778@yahoo.com>
* lint: golint issue fixes
- on my local machine golint is a lot stricter than the bot so slowly going through and fixing things.
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* more fixes from golint
* remove isPeerPersistentFn
* add changelog entry
* libs/common: refactor libs/common 2
- move random function to there own pkg
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* change imports and usage throughout repo
* fix goimports
* add changelog entry
* types: change `Commit` to consist of just signatures
These are final changes towards removing votes from commit and leaving
only signatures (see ADR-25)
Fixes#1648
* bring back TestCommitToVoteSetWithVotesForAnotherBlockOrNilBlock
+ add absent flag to Vote to indicate that it's for another block
* encode nil votes as CommitSig with BlockIDFlagAbsent
+ make Commit#Precommits array of non-pointers
because precommit will never be nil
* add NewCommitSigAbsent and Absent() funcs
* uncomment validation in CommitSig#ValidateBasic
* add comments to ValidatorSet funcs
* add a changelog entry
* break instead of continue
continue does not make sense in these cases
* types: rename Commit#Precommits to Signatures
* swagger: fix /commit response
* swagger: change block_id_flag type
* fix merge conflicts
BREAKING
Example response:
```json
{
"jsonrpc": "2.0",
"id": "",
"result": {
"height": "2109",
"txs_results": null,
"begin_block_events": null,
"end_block_events": null,
"validator_updates": null,
"consensus_param_updates": null
}
}
```
Old result consisted of ABCIResponses struct and height. Exposing
internal ABCI structures (which we store in state package) in RPC seems
bad to me for the following reasons:
1) high risk of breaking the API when somebody changes internal structs
(HAPPENED HERE!)
2) RPC is aware of ABCI, which I'm not sure we want
* cs: panic only when WAL#WriteSync fails
- modify WAL#Write and WAL#WriteSync to return an error
* fix test
* types: validate Part#Proof
add ValidateBasic to crypto/merkle/SimpleProof
* cs: limit max bit array size and block parts count
* cs: test new limits
* cs: only assert important stuff
* update changelog and bump version to 0.32.7
* fixes after Ethan's review
* align max wal msg and max consensus msg sizes
* fix tests
* fix test
* add change log for 31.11
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* Pin range scope vars
* Don't disable scopelint
This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=scopelint
Contributes to #3262
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
As per #2127, this refactors the RequestCheckTx ProtoBuf struct to allow for a flag indicating whether a query is a recheck or not (and allows for possible future, more nuanced states).
In order to pass this extended information through to the ABCI app, the proxy.AppConnMempool (and, for consistency, the proxy.AppConnConsensus) interface seems to need to be refactored along with abcicli.Client.
And, as per this comment, I've made the following modification to the protobuf definition for the RequestCheckTx structure:
enum CheckTxType {
New = 0;
Recheck = 1;
}
message RequestCheckTx {
bytes tx = 1;
CheckTxType type = 2;
}
* Refactor ABCI CheckTx to notify of recheck
As per #2127, this refactors the `RequestCheckTx` ProtoBuf struct to allow for:
1. a flag indicating whether a query is a recheck or not (and allows for
possible future, more nuanced states)
2. an `additional_data` bytes array to provide information for those more
nuanced states.
In order to pass this extended information through to the ABCI app, the
`proxy.AppConnMempool` (and, for consistency, the
`proxy.AppConnConsensus`) interface seems to need to be refactored.
Commits:
* Fix linting issue
* Add CHANGELOG_PENDING entry
* Remove extraneous explicit initialization
* Update ABCI spec doc to include new CheckTx params
* Rename method param for consistency
* Rename CheckTxType enum values and remove additional_data param
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
* check every block appHash
Fixes#3460
Not really needed, but it would detect if the app changed in a way it
shouldn't have.
* add a changelog entry
* no need to return an error if we panic
* rename methods
* rename methods once again
* add a test
* correct error msg
plus fix a few go-lint warnings
* better panic msg
* green pubsub tests :OK:
* get rid of clientToQueryMap
* Subscribe and SubscribeUnbuffered
* start adapting other pkgs to new pubsub
* nope
* rename MsgAndTags to Message
* remove TagMap
it does not bring any additional benefits
* bring back EventSubscriber
* fix test
* fix data race in TestStartNextHeightCorrectly
```
Write at 0x00c0001c7418 by goroutine 796:
github.com/tendermint/tendermint/consensus.TestStartNextHeightCorrectly()
/go/src/github.com/tendermint/tendermint/consensus/state_test.go:1296 +0xad
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Previous read at 0x00c0001c7418 by goroutine 858:
github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote()
/go/src/github.com/tendermint/tendermint/consensus/state.go:1631 +0x1366
github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote()
/go/src/github.com/tendermint/tendermint/consensus/state.go:1476 +0x8f
github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg()
/go/src/github.com/tendermint/tendermint/consensus/state.go:667 +0xa1e
github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine()
/go/src/github.com/tendermint/tendermint/consensus/state.go:628 +0x794
Goroutine 796 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
testing.runTests.func1()
/usr/local/go/src/testing/testing.go:1119 +0xa8
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
testing.runTests()
/usr/local/go/src/testing/testing.go:1117 +0x4ee
testing.(*M).Run()
/usr/local/go/src/testing/testing.go:1034 +0x2ee
main.main()
_testmain.go:214 +0x332
Goroutine 858 (running) created at:
github.com/tendermint/tendermint/consensus.(*ConsensusState).startRoutines()
/go/src/github.com/tendermint/tendermint/consensus/state.go:334 +0x221
github.com/tendermint/tendermint/consensus.startTestRound()
/go/src/github.com/tendermint/tendermint/consensus/common_test.go:122 +0x63
github.com/tendermint/tendermint/consensus.TestStateFullRound1()
/go/src/github.com/tendermint/tendermint/consensus/state_test.go:255 +0x397
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
```
* fixes after my own review
* fix formatting
* wait 100ms before kicking a subscriber out
+ a test for indexer_service
* fixes after my second review
* no timeout
* add changelog entries
* fix merge conflicts
* fix typos after Thane's review
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* reformat code
* rewrite indexer service in the attempt to fix failing test
https://github.com/tendermint/tendermint/pull/3227/#issuecomment-462316527
* Revert "rewrite indexer service in the attempt to fix failing test"
This reverts commit 0d9107a098.
* another attempt to fix indexer
* fixes after Ethan's review
* use unbuffered channel when indexing transactions
Refs https://github.com/tendermint/tendermint/pull/3227#discussion_r258786716
* add a comment for EventBus#SubscribeUnbuffered
* format code
As per #3043, this adds a ticker to sync the WAL every 2s while the WAL is running.
* Flush WAL every 2s
This adds a ticker that flushes the WAL every 2s while the WAL is
running. This is related to #3043.
* Fix spelling
* Increase timeout to 2mins for slower build environments
* Make WAL sync interval configurable
* Add TODO to replace testChan with more comprehensive testBus
* Remove extraneous debug statement
* Remove testChan in favour of using system time
As per
https://github.com/tendermint/tendermint/pull/3300#discussion_r255886586,
this removes the `testChan` WAL member and replaces the approach with a
system time-oriented one. In this new approach, we keep track of the
system time at which each flush and periodic flush successfully
occurred.
The naming of the various functions is also updated here to be more
consistent with "flushing" as opposed to "sync'ing".
* Update naming convention and ensure lock for timestamp update
* Add Flush method as part of WAL interface
Adds a `Flush` method as part of the WAL interface to enforce the idea
that we can manually trigger a WAL flush from outside of the WAL. This
is employed in the consensus state management to flush the WAL prior to
signing votes/proposals, as per https://github.com/tendermint/tendermint/issues/3043#issuecomment-453853630
* Update CHANGELOG_PENDING
* Remove mutex approach and replace with DI
The dependency injection approach to dealing with testing concerns could
allow similar effects to some kind of "testing bus"-based approach. This
commit introduces an example of this, where instead of relying on
(potentially fragile) timing of things between the code and the test, we
inject code into the function under test that can signal the test
through a channel.
This allows us to avoid the `time.Sleep()`-based approach previously
employed.
* Update comment on WAL flushing during vote signing
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Simplify flush interval definition
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Expand commentary on WAL disk flushing
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Add broken test to illustrate WAL sync test problem
Removes test-related state (dependency injection code) from the WAL data
structure and adds test code to illustrate the problem with using
`WALGenerateNBlocks` and `wal.SearchForEndHeight` to test periodic
sync'ing.
* Fix test error messages
* Use WAL group buffer size to check for flush
A function is added to `libs/autofile/group.go#Group` in order to return
the size of the buffered data (i.e. data that has not yet been flushed
to disk). The test now checks that, prior to a `time.Sleep`, the group
buffer has data in it. After the `time.Sleep` (during which time the
periodic flush should have been called), the buffer should be empty.
* Remove config root dir removal from #3291
* Add godoc for NewWAL mentioning periodic sync
* changelog: use issue number instead of PR number
* follow up to #3291
- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()
* cmd/show_validator: wrap err to make it more clear
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* types.NewCommit
* use types.NewCommit everywhere
* fix log in unsafe_reset
* memoize height and round in constructor
* notes about deprecating toVote
* bring back memoizeHeightRound
* types: memoize height/round in commit instead of first vote
* types: commit.ValidateBasic in VerifyCommit
* types: new CommitSig alias for Vote
In preparation for reducing the redundancy in Commits, we introduce the
CommitSig as an alias for Vote. This is non-breaking on the protocol,
and minor breaking on the Go API, as Commit now contains a list of
CommitSig instead of Vote.
* remove dependence on ToVote
* update some comments
* fix tests
* fix tests
* fixes from review
* consensus: createProposalBlock function
* blockExecutor.CreateProposalBlock
- factored out of consensus pkg into a method on blockExec
- new private interfaces for mempool ("txNotifier") and evpool with one function each
- consensus tests still require more mempool methods
* failing test for CreateProposalBlock
* Fix bug in include evidece into block
* evidence: change maxBytes to maxSize
* MaxEvidencePerBlock
- changed to return both the max number and the max bytes
- preparation for #2590
* changelog
* fix linter
* Fix from review
Co-Authored-By: ebuchman <ethan@coinculture.info>
* split immutable and mutable parts of priv_validator.json
* fix bugs
* minor changes
* retrig test
* delete scripts/wire2amino.go
* fix test
* fixes from review
* privval: remove mtx
* rearrange priv_validator.go
* upgrade path
* write tests for the upgrade
* fix for unsafe_reset_all
* add test
* add reset test
* WIP: switching to fixed offsets for SignBytes
* add version field to sign bytes and update order
* more comments on test-cases and add a tc with a chainID
* remove amino:"write_empty" tag
- it doesn't affect if default fixed size fields ((u)int64) are
written or not
- add comment about int->int64 casting
* update CHANGELOG_PENDING
* update documentation
* add back link to issue #1622 in documentation
* remove JSON tags and add (failing test-case)
* fix failing test
* update test-vectors due to added `Type` field
* change Type field from string to byte and add new type alias
- SignedMsgType replaces VoteTypePrevote, VoteTypePrecommit and adds new
ProposalType to separate votes from proposal when signed
- update test-vectors
* fix remains from rebasing
* use SignMessageType instead of byte everywhere
* fixes from review
Handshaker was removed from proxy package so it can be called
independently of starting the abci app connections and can return a
result to the caller.
* remove ConsensusParams.TxSize and ConsensusParams.BlockGossip
Refs #2347
* block part size is now fixed
Refs #2347
* use max data size, not max bytes for tx limit
Refs #2347
This PR changes ABCI time format from int64 (Unix seconds) to WKT (WellKnownType) google.protobuf.Timestamp.
Refs #1857
Reasons:
better precision
standard DT for proto
* update Gopkg.lock
* [makefile] remove extra grep
- go list excludes vendor by default now
* proto3 timestamp
* [docs/abci-spec] note about serialisation format
* make time non-nullable
Anton Kaliaev
Callum Waters
Erik Grinaker
Marko
Shivani Joshi
Erik Grinaker
Prince Sinha
Phil Salant
Thane Thomson
JamesRay
Alessio Treglia
Ethan Buchman
Ismail Khoffi
yutianwu
Dev Ojha
Zarko Milosevic