- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool

Refs #2659

Breaking changes in the mempool package:

- Mempool now an interface
- old Mempool renamed to CListMempool

Breaking changes to state package:

- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package

* mempool: resCb -> globalCb

* reqResCb takes an externalCb

* failing test for #3509

* txsMap is sync.Map

* update changelog

* mempool: add a safety check, write tests for mempoolIDs

and document 65536 limit in the mempool reactor spec

follow-up to https://github.com/tendermint/tendermint/pull/2778

* rename the test

* fixes after Ismail's review

Refs #3306, irisnet@fdbb676

I ran an irishub validator. After the validator node ran several days, I dump the whole goroutine stack. I found that there were hundreds of broadcastTxRoutine. However, the connected peer quantity was less than 30. So I belive that there must be broadcastTxRoutine leakage issue.

According to my analysis, I think the root cause of this issue locate in below code:

		select {
		case <-next.NextWaitChan():
			// see the start of the for loop for nil check
			next = next.Next()
		case <-peer.Quit():
			return
		case <-memR.Quit():
			return
		}

As we know, if multiple paths are avaliable in the same time, then a random path will be selected. Suppose that next.NextWaitChan() and peer.Quit() are both avaliable, and next.NextWaitChan() is chosen.

                // send memTx
		msg := &TxMessage{Tx: memTx.tx}
		success := peer.Send(MempoolChannel, cdc.MustMarshalBinaryBare(msg))
		if !success {
			time.Sleep(peerCatchupSleepIntervalMS * time.Millisecond)
			continue
		}

Then next will be non-empty and the peer send operation won't be success. As a result, this go routine will be track into infinite loop and won't be released.

My proposal is to check peer.Quit() and memR.Quit() in every loop no matter whether next is nil.

Closes #1798

This is done by making every mempool tx maintain a list of peers who its received the tx from. Instead of using the 20byte peer ID, it instead uses a local map from peerID to uint16 counter, so every peer adds 2 bytes. (Word aligned to probably make it 8 bytes)

This also required resetting the callback function on every CheckTx. This likely has performance ramifications for instruction caching. The actual setting operation isn't costly with the removal of defers in this PR.

* Make the mempool not gossip txs back to peers its received it from

* Fix adversarial memleak

* Don't break interface

* Update changelog

* Forgot to add a mtx

* forgot a mutex

* Update mempool/reactor.go

Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>

* Update mempool/mempool.go

Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>

* Use unknown peer ID

Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>

* fix compilation

* use next wait chan logic when skipping

* Minor fixes

* Add TxInfo

* Add reverse map

* Make activeID's auto-reserve 0

* 0 -> UnknownPeerID

Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>

* Switch to making the normal case set a callback on the reqres object

The recheck case is still done via the global callback, and stats
are also set via global callback

* fix merge conflict

* Addres comments

* Add cache tests

* add cache tests

* minor fixes

* update metrics in reqResCb and reformat code

* goimport -w mempool/reactor.go

* mempool: update memTx senders

I had to introduce txsMap for quick mempoolTx lookups.

* change senders type from []uint16 to sync.Map

Fixes DATA RACE:

```
Read at 0x00c0013fcd3a by goroutine 183:
  github.com/tendermint/tendermint/mempool.(*MempoolReactor).broadcastTxRoutine()
      /go/src/github.com/tendermint/tendermint/mempool/reactor.go:195 +0x3c7

Previous write at 0x00c0013fcd3a by D[2019-02-27|10:10:49.058] Read PacketMsg                               switch=3 peer=35bc1e3558c182927b31987eeff3feb3d58a0fc5@127.0.0.1
:46552 conn=MConn{pipe} packet="PacketMsg{30:2B06579D0A143EB78F3D3299DE8213A51D4E11FB05ACE4D6A14F T:1}"
goroutine 190:
  github.com/tendermint/tendermint/mempool.(*Mempool).CheckTxWithInfo()
      /go/src/github.com/tendermint/tendermint/mempool/mempool.go:387 +0xdc1
  github.com/tendermint/tendermint/mempool.(*MempoolReactor).Receive()
      /go/src/github.com/tendermint/tendermint/mempool/reactor.go:134 +0xb04
  github.com/tendermint/tendermint/p2p.createMConnection.func1()
      /go/src/github.com/tendermint/tendermint/p2p/peer.go:374 +0x25b
  github.com/tendermint/tendermint/p2p/conn.(*MConnection).recvRoutine()
      /go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:599 +0xcce

Goroutine 183 (running) created at:
D[2019-02-27|10:10:49.058] Send                                         switch=2 peer=1efafad5443abeea4b7a8155218e4369525d987e@127.0.0.1:46193 channel=48 conn=MConn{pipe} m
sgBytes=2B06579D0A146194480ADAE00C2836ED7125FEE65C1D9DD51049
  github.com/tendermint/tendermint/mempool.(*MempoolReactor).AddPeer()
      /go/src/github.com/tendermint/tendermint/mempool/reactor.go:105 +0x1b1
  github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
      /go/src/github.com/tendermint/tendermint/p2p/switch.go:683 +0x13b
  github.com/tendermint/tendermint/p2p.(*Switch).addPeer()
      /go/src/github.com/tendermint/tendermint/p2p/switch.go:650 +0x585
  github.com/tendermint/tendermint/p2p.(*Switch).addPeerWithConnection()
      /go/src/github.com/tendermint/tendermint/p2p/test_util.go:145 +0x939
  github.com/tendermint/tendermint/p2p.Connect2Switches.func2()
      /go/src/github.com/tendermint/tendermint/p2p/test_util.go:109 +0x50

I[2019-02-27|10:10:49.058] Added good transaction                       validator=0 tx=43B4D1F0F03460BD262835C4AA560DB860CFBBE85BD02386D83DAC38C67B3AD7 res="&{CheckTx:gas_w
anted:1 }" height=0 total=375
Goroutine 190 (running) created at:
  github.com/tendermint/tendermint/p2p/conn.(*MConnection).OnStart()
      /go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:210 +0x313
  github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
      /go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
  github.com/tendermint/tendermint/p2p.(*peer).OnStart()
      /go/src/github.com/tendermint/tendermint/p2p/peer.go:179 +0x56
  github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
      /go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
  github.com/tendermint/tendermint/p2p.(*peer).Start()
      <autogenerated>:1 +0x43
  github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
```

* explain the choice of a map DS for senders

* extract ids pool/mapper to a separate struct

* fix literal copies lock value from senders: sync.Map contains sync.Mutex

* use sync.Map#LoadOrStore instead of Load

* fixes after Ismail's review

* rename resCbNormal to resCbFirstTime

* bound mempool memory usage

Closes #3079

* rename SizeBytes to TxsTotalBytes

and other small fixes after Zarko's review

* rename MaxBytes to MaxTxsTotalBytes

* make ErrMempoolIsFull more informative

* expose mempool's txs_total_bytes via RPC

* test full response

* fixes after Ethan's review

* config: rename mempool.size to mempool.max_txs

https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004

* test more cases

https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532

* simplify test

* Revert "config: rename mempool.size to mempool.max_txs"

This reverts commit 39bfa36961.

* rename count back to n_txs

to make a change non-breaking

* rename max_txs_total_bytes to max_txs_bytes

* format code

* fix TestWALPeriodicSync

The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.

* Apply suggestions from code review

* changelog: use issue number instead of PR number

* follow up to #3291

- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()

* cmd/show_validator: wrap err to make it more clear

* improve ResetTestRootWithChainID() concurrency safety

Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.

* Update config/toml.go

Co-Authored-By: alessio <quadrispro@ubuntu.com>

* clean up test directories after completion

Closes: #1034

* Remove redundant EnsureDir call

* s/PanicSafety()/panic()/s

* Put create dir functionality back in ResetTestRootWithChainID

* Place test directories in OS's tempdir

In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.

* Set 0700 to a const

* rootsDirs -> configRootDirs

* Don't double remove directories

* Avoid global variables

* Fix consensus tests

* Reduce defer stack

* Address review comments

* Try to fix tests

* Update CHANGELOG_PENDING.md

Co-Authored-By: alessio <quadrispro@ubuntu.com>

* Update consensus/common_test.go

Co-Authored-By: alessio <quadrispro@ubuntu.com>

* Update consensus/common_test.go

Co-Authored-By: alessio <quadrispro@ubuntu.com>

* not related to linter: remove obsolete constants:
 - `Insecure` and `Secure` and type `Security` are not used anywhere

* not related to linter: update example

 - NewInsecure was deleted; change example to NewRemoteDB

* address: Binds to all network interfaces (gosec):

 - bind to localhost instead of 0.0.0.0
 - regenerate test key and cert for this purpose (was valid for ::) and
 otherwise we would see:
 transport: authentication handshake failed: x509: certificate is
 valid for ::, not 127.0.0.1\"

(used https://github.com/google/keytransparency/blob/master/scripts/gen_server_keys.sh
to regenerate certs)

* use sha256 in tests instead of md5; time difference is negligible

* nolint usage of math/rand in test and add comment on its import

 - crypto/rand is slower and we do not need sth more secure in tests

* enable linter in circle-ci

* another nolint math/rand in test

* replace another occurrence of md5

* consistent comment about importing math/rand

Before: Unexpected tx response from proxy during recheck\n Expected: {r.CheckTx.Data}, got: {memTx.tx}
After: Unexpected tx response from proxy during recheck\n Expected: {memTx.tx}, got: {tx}

Closes #3214

As per conversation here: https://github.com/tendermint/tendermint/pull/3218#discussion_r251364041

This is the result of running the following code on the repo:

```bash
find . -name '*.go' | grep -v 'vendor/' | xargs -n 1 goimports -w
```

- fixes #3008
- reactor requires encoded messages are less than maxMsgSize
- requires size of tx + amino-overhead to not exceed maxMsgSize

* add "chain_id" label for all metrics

Refs #3082

* fix labels extraction

because we pop txs from the front if the cache is full

Refs #3035

because we pop txs from the front if the cache is full

Refs #3035

(left after committing a block)

Fixes #2961

--------------
ORIGINAL ISSUE

Tendermint version : 0.26.4-b771798d

ABCI app : kv-store

Environment:

OS (e.g. from /etc/os-release): macOS 10.14.1 What happened: Set
mempool.recheck = false and create empty block = false in config.toml.
When transactions get added right between a new empty block is being
proposed and committed, the proposer won't propose new block for that
transactions immediately after. That transactions are stuck in the
mempool until a new transaction is added and trigger the proposer.

What you expected to happen: If there is a transaction left in the
mempool, new block should be proposed immediately.

Have you tried the latest version: yes

How to reproduce it (as minimally and precisely as possible): Fire two
transaction using broadcast_tx_sync with specific delay between them.
(You may need to do it multiple time before the right delay is found, on
my machine the delay is 0.98s)

Logs (paste a small part showing an error (< 10 lines) or link a
pastebin, gist, etc. containing more of the log file):
https://pastebin.com/0Wt6uhPF

Config (you can paste only the changes you've made): [mempool] recheck =
false create_empty_block = false

Anything else we need to know: In mempool.go, we found that proposer
will immediately propose new block if

Last committed block has some transaction (causing AppHash to changed)
or mem.notifyTxsAvailable() is called. Our scenario is as followed.

A transaction is fired, it will create 1 block with 1 tx (line 1-4 in
the log) and 1 empty block. After the empty block is proposed but before
it is committed, second transaction is fired and added to mempool. (line
8-16) Now, since the last committed block is empty and
mem.notifyTxsAvailable() will be called only if mempool.recheck = true.
The proposer won't immediately propose new block, causing the second
transaction to stuck in mempool until another transaction is added to
mempool and trigger mem.notifyTxsAvailable().

Refs #2994

This is only one part of #2989. We also need to fix the application,
and add rules to consensus to ensure this.

Within every tx in the mempool, we store a 64 bit counter,
as an index for when it was inserted into the mempool.
This counter doesn't really serve any purpose.
It was likely added for debugging at one point,
Removing the counter reclaims memory,
which enables greater mempool sizes / mitigates resources at the same size.

Closes #2835

We should add txs that come in from mempool.Update to the mempool's
cache, so that they never hit a potentially expensive check tx.

Originally posted by @ValarDragon in #2846
https://github.com/tendermint/tendermint/issues/2846#issuecomment-439216656

Refs #2855

- rename filterTxs to removeTxs
- move txsMap into removeTxs func
- rename goodTxs to txsLeft

* use READ lock/unlock in ConsensusState#GetLastHeight

Refs #2721

* do not use defers when there's no need

* fix peer formatting (output its address instead of the pointer)

```
[54310]: E[11-02|11:59:39.851] Connection failed @ sendRoutine              module=p2p peer=0xb78f00 conn=MConn{74.207.236.148:26656} err="pong timeout"
```

https://github.com/tendermint/tendermint/issues/2721#issuecomment-435326581

* panic if peer has no state

https://github.com/tendermint/tendermint/issues/2721#issuecomment-435347165

It's confusing that sometimes we check if peer has a state, but most of
the times we expect it to be there

1. add79700b5/mempool/reactor.go (L138)
2. add79700b5/rpc/core/consensus.go (L196) (edited)

I will change everything to always assume peer has a state and panic
otherwise

that should help identify issues earlier

* abci/localclient: extend lock on app callback

App callback should be protected by lock as well (note this was already
done for InitChainAsync, why not for others???). Otherwise, when we
execute the block, tx might come in and call the callback in the same
time we're updating it in execBlockOnProxyApp => DATA RACE

Fixes #2721

Consensus state is locked

```
goroutine 113333 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00180009c, 0xc0000c7e00)
        /usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*RWMutex).RLock(0xc001800090)
        /usr/local/go/src/sync/rwmutex.go:50 +0x4e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).GetRoundState(0xc001800000, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:218 +0x46
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).queryMaj23Routine(0xc0017def80, 0x11104a0, 0xc0072488f0, 0xc007248
9c0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:735 +0x16d
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).AddPeer
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:172 +0x236
```

because localClient is locked

```
goroutine 1899 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0xc0000cb500)
        /usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
        /usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).SetResponseCallback(0xc0001fb560, 0xc007868540)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:32 +0x33
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnConsensus).SetResponseCallback(0xc00002f750, 0xc007868540)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:57 +0x40
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.execBlockOnProxyApp(0x1104e20, 0xc002ca0ba0, 0x11092a0, 0xc00002f750, 0xc0001fe960, 0xc000bfc660, 0x110cfe0, 0xc000090330, 0xc9d12, 0xc000d9d5a0, ...)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:230 +0x1fd
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.(*BlockExecutor).ApplyBlock(0xc002c2a230, 0x7, 0x0, 0xc000eae880, 0x6, 0xc002e52c60, 0x16, 0x1f927, 0xc9d12, 0xc000d9d5a0, ...)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:96 +0x142
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).finalizeCommit(0xc001800000, 0x1f928)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1339 +0xa3e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryFinalizeCommit(0xc001800000, 0x1f928)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1270 +0x451
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit.func1(0xc001800000, 0x0, 0x1f928)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1218 +0x90
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit(0xc001800000, 0x1f928, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1247 +0x6b8
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xc003bc7ad0, 0xc003bc7b10)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1659 +0xbad
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xf1, 0xf1)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1517 +0x59
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg(0xc001800000, 0xd98200, 0xc0070dbed0, 0xc000cf4cc0, 0x28)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:660 +0x64b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine(0xc001800000, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:617 +0x670
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).OnStart
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:311 +0x132
```

tx comes in and CheckTx is executed right when we execute the block

```
goroutine 111044 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0x0)
        /usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
        /usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).CheckTxAsync(0xc0001fb0e0, 0xc002d94500, 0x13f, 0x280, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:85 +0x47
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnMempool).CheckTxAsync(0xc00002f720, 0xc002d94500, 0x13f, 0x280, 0x1)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:114 +0x51
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool.(*Mempool).CheckTx(0xc002d3a320, 0xc002d94500, 0x13f, 0x280, 0xc0072355f0, 0x0, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool/mempool.go:316 +0x17b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core.BroadcastTxSync(0xc002d94500, 0x13f, 0x280, 0x0, 0x0, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core/mempool.go:93 +0xb8
reflect.Value.call(0xd85560, 0x10326c0, 0x13, 0xec7b8b, 0x4, 0xc00663f180, 0x1, 0x1, 0xc00663f180, 0xc00663f188, ...)
        /usr/local/go/src/reflect/value.go:447 +0x449
reflect.Value.Call(0xd85560, 0x10326c0, 0x13, 0xc00663f180, 0x1, 0x1, 0x0, 0x0, 0xc005cc9344)
        /usr/local/go/src/reflect/value.go:308 +0xa4
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.makeHTTPHandler.func2(0x1102060, 0xc00663f100, 0xc0082d7900)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/handlers.go:269 +0x188
net/http.HandlerFunc.ServeHTTP(0xc002c81f20, 0x1102060, 0xc00663f100, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:1964 +0x44
net/http.(*ServeMux).ServeHTTP(0xc002c81b60, 0x1102060, 0xc00663f100, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:2361 +0x127
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.maxBytesHandler.ServeHTTP(0x10f8a40, 0xc002c81b60, 0xf4240, 0x1102060, 0xc00663f100, 0xc0082d7900)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:219 +0xcf
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.RecoverAndLogHandler.func1(0x1103220, 0xc00121e620, 0xc0082d7900)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:192 +0x394
net/http.HandlerFunc.ServeHTTP(0xc002c06ea0, 0x1103220, 0xc00121e620, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:1964 +0x44
net/http.serverHandler.ServeHTTP(0xc001a1aa90, 0x1103220, 0xc00121e620, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:2741 +0xab
net/http.(*conn).serve(0xc00785a3c0, 0x11041a0, 0xc000f844c0)
        /usr/local/go/src/net/http/server.go:1847 +0x646
created by net/http.(*Server).Serve
        /usr/local/go/src/net/http/server.go:2851 +0x2f5
```

* consensus: use read lock in Receive#VoteMessage

* use defer to unlock mutex because application might panic

* use defer in every method of the localClient

* add a changelog entry

* drain channels before Unsubscribe(All)

Read 55362ed766/libs/pubsub/pubsub.go (L13)
for the detailed explanation of the issue.

We'll need to fix it someday. Make sure to keep an eye on
https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-033-pubsub.md

* retry instead of panic when peer has no state in reactors other than consensus

in /dump_consensus_state RPC endpoint, skip a peer with no state

* rpc/core/mempool: simplify error messages

* rpc/core/mempool: use time.After instead of timer

also, do not log DeliverTx result (to be consistent with other memthods)

* unlock before calling the callback in reqRes#SetCallback

* fix amino overhead computation for Tx:

- also count the fieldnum / typ3
- add method to compute overhead per Tx
- slightly clarify comment on MaxAminoOverheadForBlock
- add tests

* fix TestReapMaxBytesMaxGas according to amino overhead

* fix TestMempoolFilters according to amino overhead

* address review comments:

 - add a note about fieldNum = 1
 - add forgotten godoc comment

* fix and use sm.TxPreCheck

* fix test

* remove print statement

This is a follow-up from https://github.com/tendermint/tendermint/pull/2724

Closes #2761

* only invoke InitWAL/CloseWAL if WalPath is not empty

Closes #2717

* panic if WAL is not initialized when calling CloseWAL

* add a changelog entry

* mempool: ErrPreCheck and more log info

* change Pre/PostCheckFunc to return errors

also, continue execution when checking txs in mempool_test if
err=PreCheckErr

* Add additional metrics
Continues addressing https://github.com/cosmos/cosmos-sdk/issues/2169.
* Add nop metrics to fix NPE
* Tweak buckets, code review
* Update buckets
* Update docs with new metrics
* Code review updates

* remove some XXX

* config: remove Mempool.RecheckEmpty

* docs: remove recheck_empty

This change doubles the speed of the mempool's reaping.
Before:

BenchmarkReap-8   	    5000	    365390 ns/op	  122887 B/op

After:

BenchmarkReap-8   	   10000	    158274 ns/op	  122882 B/op

* Add additional metrics to p2p and consensus
Partially addresses https://github.com/cosmos/cosmos-sdk/issues/2169.
* WIP
* Updates from code review
* Updates from code review
* Add instrumentation namespace to configuration
* Fix test failure
* Updates from code review
* Add quotes
* Add atomic load
* Use storeint64
* Use addInt64 in writePacketMsgTo

* mempool: update some comments

* make build_c

* docs: notes about databases and WAL files

* docs: determinism. closes #1279

* docs: small note about query paths. closes #2090

* docs: gas

* docs: abci consensus params

This also refactors the prior mempool to filter to be known as
"precheck filter" and this new filter is called "postcheck filter"

This PR also fixes a bug where the precheck filter previously didn't
account for the amino overhead, which could a maliciously sized tx to
halt blocks from getting any txs in them.

* Move maxGas outside of function definition to avoid race condition
* Type filter funcs and make public
* Use helper method for post check
* Remove superfluous Filter suffix
* Move default pre/post checks into package
* Fix broken references
* Fix typos
* Expand on examples for checks

* follow up to removing some consensus params Refs #2382
* change args type to int64 in state#makeParams
* make valsCount and evidenceCount ints again
* MaxEvidenceBytesPerBlock: include magic number in godoc
* [spec] creating a proposal
* test state#TxFilter
* panic if MaxDataBytes is less than 0
* fixes after review
* use amino#UvarintSize to calculate overhead
0c74291f3b/encoder.go (L85-L90)
* avoid cyclic imports
* you can do better Go, come on
* remove testdouble package

Closes #2399

* Make mempool aware of MaxGas requirement

* update spec

* Add tests

* Switch GasWanted from kv store to persistent kv store

* Fix typo in test name

* switch back to using kvstore, not persistent kv store

* ReapMaxTxs: return all txs if max is negative

this mirrors ReapMaxBytes behavior

See https://github.com/tendermint/tendermint/pull/2184#discussion_r214439950

* increase MaxAminoOverheadForBlock

tested with:

```
func TestMaxAminoOverheadForBlock(t *testing.T) {

        maxChainID := ""
        for i := 0; i < MaxChainIDLen; i++ {
                maxChainID += "𠜎"
        }

        h := Header{
                ChainID:            maxChainID,
                Height:             10,
                Time:               time.Now().UTC(),
                NumTxs:             100,
                TotalTxs:           200,
                LastBlockID:        makeBlockID(make([]byte, 20), 300, make([]byte, 20)),
                LastCommitHash:     tmhash.Sum([]byte("last_commit_hash")),
                DataHash:           tmhash.Sum([]byte("data_hash")),
                ValidatorsHash:     tmhash.Sum([]byte("validators_hash")),
                NextValidatorsHash: tmhash.Sum([]byte("next_validators_hash")),
                ConsensusHash:      tmhash.Sum([]byte("consensus_hash")),
                AppHash:            tmhash.Sum([]byte("app_hash")),
                LastResultsHash:    tmhash.Sum([]byte("last_results_hash")),
                EvidenceHash:       tmhash.Sum([]byte("evidence_hash")),
                ProposerAddress:    tmhash.Sum([]byte("proposer_address")),
        }
        b := Block{
                Header:     h,
                Data:       Data{Txs: makeTxs(10000, 100)},
                Evidence:   EvidenceData{},
                LastCommit: &Commit{},
        }

        bz, err := cdc.MarshalBinary(b)
        require.NoError(t, err)

        assert.Equal(t, MaxHeaderBytes+MaxAminoOverheadForBlock-2, len(bz)-1000000-20000-1)
}
```

* fix MaxYYY constants calculation

by using math.MaxInt64

See https://github.com/tendermint/tendermint/pull/2184#discussion_r214444244

* pass mempool filter as an option

See https://github.com/tendermint/tendermint/pull/2184#discussion_r214445869

* fixes after Dev's comments

See ADR 020: Limiting txs size inside a block docs/architecture/adr-020-block-size.md

Refs #2035

* mempool: Store txs by hash inside of cache

This allows for large cachesizes, without fear of the memory
consumption growing rapidly.

* (squash this) rename hashedTx -> txHash

* mempool: Keep cache hashmap and linked list in sync

This removes bugs with the linked list being full, but hashmap empty

* address PR comments

* switch clist back to list

* libs: Remove usage of custom Fmt, in favor of fmt.Sprintf

Closes #2193

* Fix bug that was masked by custom Fmt!

This PR changes ABCI time format from int64 (Unix seconds) to WKT (WellKnownType) google.protobuf.Timestamp.

Refs #1857

Reasons:

better precision
standard DT for proto

* update Gopkg.lock
* [makefile] remove extra grep
    - go list excludes vendor by default now
* proto3 timestamp
* [docs/abci-spec] note about serialisation format
* make time non-nullable

* #1920 try to fix race condition on proposal height for published txs

- related to create_empty_blocks=false
- published height for accepted tx can be wrong (too low)
- use the actual mempool height + 1 for the proposal
- expose Height() on mempool

* #1920 add initial test for mempool.Height()

- not sure how to test the lock
- can the mutex reference be of type Locker?
-- this way, we can use a "mock" of the mutex to test triggering

* #1920 use the ConsensusState height in favor of mempool

- gets rid of indirections
- doesn't need any "+1" magic

* #1920 cosmetic

- if we use cs.Height, it's enough to evaluate right before propose

* #1920 cleanup TODO and non-needed code

* #1920 add changelog entry

This reverts commit d02c5d1e30.