There are cases where we only have a small number of addresses marked
good ("old"), but the selection mechanism keeps trying to select more of these
addresses, and hence ends up in an infinite loop. Here we fix this to
only try and select such "old" addresses if we have enough of them. Note this
means, if we don't have enough of them, we may return more "new"
addresses than otherwise expected by the newSelectionBias.

This whole GetSelectionWithBias method probably needs to be rewritten,
but this is a quick fix for the issue.

in the attempt to fix https://circleci.com/gh/tendermint/tendermint/43165

also

    code is simplified by running gofmt -s .
    remove unused vars
    enable linters we're currently passing
    remove deprecated linters

in https://github.com/tendermint/tendermint/pull/3209

> Implement a check for the blacklisted low order points, ala the X25519 has_small_order() function in libsodium

(#3010 (comment))
resolves first half of #3010

Before: Unexpected tx response from proxy during recheck\n Expected: {r.CheckTx.Data}, got: {memTx.tx}
After: Unexpected tx response from proxy during recheck\n Expected: {memTx.tx}, got: {tx}

Closes #3214

Because there's nothing worse than having to copy/paste a link from a
web page to navigate to it 😁

As per conversation here: https://github.com/tendermint/tendermint/pull/3218#discussion_r251364041

This is the result of running the following code on the repo:

```bash
find . -name '*.go' | grep -v 'vendor/' | xargs -n 1 goimports -w
```

* add go-deadlock tool to help detect deadlocks

Run it with `make test_with_deadlock`. After it's done, use Git to
cleanup `git checkout .`

Link: https://github.com/sasha-s/go-deadlock/
Replaces https://github.com/tendermint/tendermint/pull/3148

* add a target to cleanup changes

Fixes #3179

so if we did not index the last block (because of panic or smth else), we index it during replay

Closes #3186

Distinguish between user events and internal consensus events

- links to issues
 - fix a few markdown glitches
 - inline code
 - etc

* add ResetTestRootWithChainID

* modify chainid

Merge master back to develop

Release/v0.29.1

fix halting issue

Closes #3037

Closes #3180

* docs: update pubsub ADR

* third version

Closes #3192.

* close peer's connection to avoid fd leak

Fixes #2967

* rename peer#Addr to RemoteAddr

* fix test

* fixes after Ethan's review

* bring back the check

* changelog entry

* write a test for switch#acceptRoutine

* increase timeouts? :(

* remove extra assertNPeersWithTimeout

* simplify test

* assert number of peers (just to be safe)

* Cleanup in OnStop

* run tests with verbose flag on CircleCI

* spawn a reading routine to prevent connection from closing

* get port from the listener

random port is faster, but often results in

```
panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered]
        panic: listen tcp 127.0.0.1:44068: bind: address already in use

goroutine 79 [running]:
testing.tRunner.func1(0xc0001bd600)
        /usr/local/go/src/testing/testing.go:792 +0x387
panic(0x974d20, 0xc0001b0500)
        /usr/local/go/src/runtime/panic.go:513 +0x1b9
github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...)
        /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28
github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed)
        /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9
github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0)
        /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c
github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600)
        /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58
testing.tRunner(0xc0001bd600, 0xb42038)
        /usr/local/go/src/testing/testing.go:827 +0xbf
created by testing.(*T).Run
        /usr/local/go/src/testing/testing.go:878 +0x353
exit status 2
FAIL    github.com/tendermint/tendermint/p2p    0.350s
```

Merge master to develop

Release/v0.29.0

* update changelog and upgrading

* add note about max voting power in abci spec

* update version

* changelog

* spec: specify when MerkleRoot is on hashes

* remove unnecessary hash methods

* update changelog

* fix test

* base verifier: bc->bv and check chainid

* improve some comments

* comments in dynamic verifier

* fix comment in doc about BaseVerifier

It requires the validator set to perfectly match.

* failing test for #2862

* move errTooMuchChange to types. fixes #2862

* changelog, comments

* ic -> dv

* update comment, link to issue

- fixes #3008
- reactor requires encoded messages are less than maxMsgSize
- requires size of tx + amino-overhead to not exceed maxMsgSize

* types: dont hash entire ConsensusParams

* update encoding spec

* update blockchain spec

* spec: consensus params hash

* changelog

* more proposer priority tests

 - test that we don't reset to zero when updating / adding
 - test that same power validators alternate

* add another test to track / simulate similar behaviour as in #2960

* address some of Chris' review comments

* address some more of Chris' review comments

* temporarily pushing branch with the following changes:
The total power might change if:
   - a validator is added
   - a validator is removed
   - a validator is updated

Decrement the accums (of all validators) directly after any of these events
(by the inverse of the change)

* Fix 2960 by re-normalizing / scaling priorities to be in bounds of total
power, additionally:

 - remove heap where it doesn't make sense
 - avg. only at the end of IncrementProposerPriority instead of each
   iteration
 - update (and slightly improve)
   TestAveragingInIncrementProposerPriorityWithVotingPower to reflect
   above changes

* Fix 2960 by re-normalizing / scaling priorities to be in bounds of total
power, additionally:

 - remove heap where it doesn't make sense
 - avg. only at the end of IncrementProposerPriority instead of each
   iteration
 - update (and slightly improve)
   TestAveragingInIncrementProposerPriorityWithVotingPower to reflect
   above changes

* fix tests

* add comment

* update changelog pending & some minor changes

* comment about division will floor the result & fix typo

* Update TestLargeGenesisValidator:
 - remove TODO and increase large genesis validator's voting power
accordingly

* move changelog entry to P2P Protocol

* Ceil instead of flooring when dividing & update test

* quickly fix failing TestProposerPriorityDoesNotGetResetToZero:

 - divide by Ceil((maxPriority - minPriority) / 2*totalVotingPower)

* fix typo: rename getValWitMostPriority -> getValWithMostPriority

* test proposer frequencies

* return absolute value for diff. keep testing

* use for loop for div

* cleanup, more tests

* spellcheck

* get rid of using floats: manually ceil where necessary

* Remove float, simplify, fix tests to match chris's proof (#3157)

* update btcd fork for v0.1.1

* changelog

Merge master back to develop

Release/v0.28.1

```
panic: failed to unmarshal json: unexpected end of JSON input

goroutine 1 [running]:
main.main()
	/root/gelgo/src/github.com/tendermint/tendermint/scripts/json2wal/main.go:66 +0x73f
```

Closes #3146

Adding the OrderStream network client (alpha), ParadigmCore, to the `ecosystem.json` file.

* consensus: createProposalBlock function

* blockExecutor.CreateProposalBlock

- factored out of consensus pkg into a method on blockExec
- new private interfaces for mempool ("txNotifier") and evpool with one function each
- consensus tests still require more mempool methods

* failing test for CreateProposalBlock

* Fix bug in include evidece into block

* evidence: change maxBytes to maxSize

* MaxEvidencePerBlock

- changed to return both the max number and the max bytes
- preparation for #2590

* changelog

* fix linter

* Fix from review

Co-Authored-By: ebuchman <ethan@coinculture.info>

* Consolidates deadline tests for privval Unix/TCP

Following on from #3115 and #3132, this converts fundamental timeout
errors from the client's `acceptConnection()` method so that these can
be detected by the test for the TCP connection.

Timeout deadlines are now tested for both TCP and Unix domain socket
connections.

There is also no need for the additional secret connection code: the
connection will time out at the `acceptConnection()` phase for TCP
connections, and will time out when attempting to obtain the
`RemoteSigner`'s public key for Unix domain socket connections.

* Removes extraneous logging

* Adds IsConnTimeout helper function

This commit adds a helper function to detect whether an error is either
a fundamental networking timeout error, or an `ErrConnTimeout` error
specific to the `RemoteSigner` class.

* Adds a test for the IsConnTimeout() helper function

* Separates tests logically for IsConnTimeout