Addresses one of the concerns with #7041.
Provides a mechanism (via the RPC interface) to delete a single transaction, described by its hash, from the mempool. The method returns an error if the transaction cannot be found. Once the transaction is removed it remains in the cache and cannot be resubmitted until the cache is cleared or it expires from the cache.
`abci.Client`:
- Sync and Async methods now accept a context for cancellation
* grpc client uses context to cancel both Sync and Async requests
* local client ignores context parameter
* socket client uses context to cancel Sync requests and to drop Async requests before sending them if context was cancelled prior to that
- Async methods return an error
* socket client returns an error immediately if queue is full for Async requests
* local client always returns nil error
* grpc client returns an error if context was cancelled before we got response or the receiving queue had a space for response (do not confuse with the sending queue from the socket client)
- specify clients semantics in [doc.go](https://raw.githubusercontent.com/tendermint/tendermint/27112fffa62276bc016d56741f686f0f77931748/abci/client/doc.go)
`mempool.TxInfo`
- add optional `Context` to `TxInfo`, which can be used to cancel `CheckTx` request
Closes#5190
* proto: move mempool to proto
- changes according to moving the mempool reactor to proto
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
Closes: #2883
* Fix long line errors in abci, crypto, and libs packages
* Fix long lines in p2p and rpc packages
* Fix long lines in abci, state, and tools packages
* Fix long lines in behaviour and blockchain packages
* Fix long lines in cmd and config packages
* Begin fixing long lines in consensus package
* Finish fixing long lines in consensus package
* Add lll exclusion for lines containing URLs
* Fix long lines in crypto package
* Fix long lines in evidence package
* Fix long lines in mempool and node packages
* Fix long lines in libs package
* Fix long lines in lite package
* Fix new long line in node package
* Fix long lines in p2p package
* Ignore gocritic warning
* Fix long lines in privval package
* Fix long lines in rpc package
* Fix long lines in scripts package
* Fix long lines in state package
* Fix long lines in tools package
* Fix long lines in types package
* Enable lll linter
* Include sender when logging rejected txns
* Log as peerID to be consistent with other log messages
* Updated CHANGELOG_PENDING
* Handle nil source
* Updated PR link in CHANGELOG_PENDING
* Renamed TxInfo.SenderAddress and peerAddress til PeerFullID
* Renamed PeerFullID to PeerP2PID
* Forgot to rename a couple of references
* mempool: remove only valid (Code==0) txs on Update
so evil proposers can't drop valid txs in Commit stage.
Also remove invalid (Code!=0) txs from the cache so they can be
resubmitted.
Fixes#3322@rickyyangz:
In the end of commit stage, we will update mempool to remove all the txs
in current block.
// Update mempool.
err = blockExec.mempool.Update(
block.Height,
block.Txs,
TxPreCheck(state),
TxPostCheck(state),
)
Assum an account has 3 transactions in the mempool, the sequences are
100, 101 and 102 separately, So an evil proposal can only package the
101 and 102 transactions into its proposal block, and leave 100 still in
mempool, then the two txs will be removed from all validators' mempool
when commit. So the account lost the two valid txs.
@ebuchman:
In the longer term we may want to do something like #2639 so we can
validate txs before we commit the block. But even in this case we'd only
want to run the equivalent of CheckTx, which means the DeliverTx could
still fail even if the CheckTx passes depending on how the app handles
the ABCI Code semantics. So more work will be required around the ABCI
code. See also #2185
* add changelog entry and tests
* improve changelog message
* reformat code
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
* mempool: add a safety check, write tests for mempoolIDs
and document 65536 limit in the mempool reactor spec
follow-up to https://github.com/tendermint/tendermint/pull/2778
* rename the test
* fixes after Ismail's review
Closes#1798
This is done by making every mempool tx maintain a list of peers who its received the tx from. Instead of using the 20byte peer ID, it instead uses a local map from peerID to uint16 counter, so every peer adds 2 bytes. (Word aligned to probably make it 8 bytes)
This also required resetting the callback function on every CheckTx. This likely has performance ramifications for instruction caching. The actual setting operation isn't costly with the removal of defers in this PR.
* Make the mempool not gossip txs back to peers its received it from
* Fix adversarial memleak
* Don't break interface
* Update changelog
* Forgot to add a mtx
* forgot a mutex
* Update mempool/reactor.go
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Update mempool/mempool.go
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Use unknown peer ID
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* fix compilation
* use next wait chan logic when skipping
* Minor fixes
* Add TxInfo
* Add reverse map
* Make activeID's auto-reserve 0
* 0 -> UnknownPeerID
Co-Authored-By: ValarDragon <ValarDragon@users.noreply.github.com>
* Switch to making the normal case set a callback on the reqres object
The recheck case is still done via the global callback, and stats
are also set via global callback
* fix merge conflict
* Addres comments
* Add cache tests
* add cache tests
* minor fixes
* update metrics in reqResCb and reformat code
* goimport -w mempool/reactor.go
* mempool: update memTx senders
I had to introduce txsMap for quick mempoolTx lookups.
* change senders type from []uint16 to sync.Map
Fixes DATA RACE:
```
Read at 0x00c0013fcd3a by goroutine 183:
github.com/tendermint/tendermint/mempool.(*MempoolReactor).broadcastTxRoutine()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:195 +0x3c7
Previous write at 0x00c0013fcd3a by D[2019-02-27|10:10:49.058] Read PacketMsg switch=3 peer=35bc1e3558c182927b31987eeff3feb3d58a0fc5@127.0.0.1
:46552 conn=MConn{pipe} packet="PacketMsg{30:2B06579D0A143EB78F3D3299DE8213A51D4E11FB05ACE4D6A14F T:1}"
goroutine 190:
github.com/tendermint/tendermint/mempool.(*Mempool).CheckTxWithInfo()
/go/src/github.com/tendermint/tendermint/mempool/mempool.go:387 +0xdc1
github.com/tendermint/tendermint/mempool.(*MempoolReactor).Receive()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:134 +0xb04
github.com/tendermint/tendermint/p2p.createMConnection.func1()
/go/src/github.com/tendermint/tendermint/p2p/peer.go:374 +0x25b
github.com/tendermint/tendermint/p2p/conn.(*MConnection).recvRoutine()
/go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:599 +0xcce
Goroutine 183 (running) created at:
D[2019-02-27|10:10:49.058] Send switch=2 peer=1efafad5443abeea4b7a8155218e4369525d987e@127.0.0.1:46193 channel=48 conn=MConn{pipe} m
sgBytes=2B06579D0A146194480ADAE00C2836ED7125FEE65C1D9DD51049
github.com/tendermint/tendermint/mempool.(*MempoolReactor).AddPeer()
/go/src/github.com/tendermint/tendermint/mempool/reactor.go:105 +0x1b1
github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
/go/src/github.com/tendermint/tendermint/p2p/switch.go:683 +0x13b
github.com/tendermint/tendermint/p2p.(*Switch).addPeer()
/go/src/github.com/tendermint/tendermint/p2p/switch.go:650 +0x585
github.com/tendermint/tendermint/p2p.(*Switch).addPeerWithConnection()
/go/src/github.com/tendermint/tendermint/p2p/test_util.go:145 +0x939
github.com/tendermint/tendermint/p2p.Connect2Switches.func2()
/go/src/github.com/tendermint/tendermint/p2p/test_util.go:109 +0x50
I[2019-02-27|10:10:49.058] Added good transaction validator=0 tx=43B4D1F0F03460BD262835C4AA560DB860CFBBE85BD02386D83DAC38C67B3AD7 res="&{CheckTx:gas_w
anted:1 }" height=0 total=375
Goroutine 190 (running) created at:
github.com/tendermint/tendermint/p2p/conn.(*MConnection).OnStart()
/go/src/github.com/tendermint/tendermint/p2p/conn/connection.go:210 +0x313
github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
/go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
github.com/tendermint/tendermint/p2p.(*peer).OnStart()
/go/src/github.com/tendermint/tendermint/p2p/peer.go:179 +0x56
github.com/tendermint/tendermint/libs/common.(*BaseService).Start()
/go/src/github.com/tendermint/tendermint/libs/common/service.go:139 +0x4df
github.com/tendermint/tendermint/p2p.(*peer).Start()
<autogenerated>:1 +0x43
github.com/tendermint/tendermint/p2p.(*Switch).startInitPeer()
```
* explain the choice of a map DS for senders
* extract ids pool/mapper to a separate struct
* fix literal copies lock value from senders: sync.Map contains sync.Mutex
* use sync.Map#LoadOrStore instead of Load
* fixes after Ismail's review
* rename resCbNormal to resCbFirstTime
* bound mempool memory usage
Closes#3079
* rename SizeBytes to TxsTotalBytes
and other small fixes after Zarko's review
* rename MaxBytes to MaxTxsTotalBytes
* make ErrMempoolIsFull more informative
* expose mempool's txs_total_bytes via RPC
* test full response
* fixes after Ethan's review
* config: rename mempool.size to mempool.max_txs
https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004
* test more cases
https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532
* simplify test
* Revert "config: rename mempool.size to mempool.max_txs"
This reverts commit 39bfa36961.
* rename count back to n_txs
to make a change non-breaking
* rename max_txs_total_bytes to max_txs_bytes
* format code
* fix TestWALPeriodicSync
The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.
* Apply suggestions from code review
(left after committing a block)
Fixes#2961
--------------
ORIGINAL ISSUE
Tendermint version : 0.26.4-b771798d
ABCI app : kv-store
Environment:
OS (e.g. from /etc/os-release): macOS 10.14.1 What happened: Set
mempool.recheck = false and create empty block = false in config.toml.
When transactions get added right between a new empty block is being
proposed and committed, the proposer won't propose new block for that
transactions immediately after. That transactions are stuck in the
mempool until a new transaction is added and trigger the proposer.
What you expected to happen: If there is a transaction left in the
mempool, new block should be proposed immediately.
Have you tried the latest version: yes
How to reproduce it (as minimally and precisely as possible): Fire two
transaction using broadcast_tx_sync with specific delay between them.
(You may need to do it multiple time before the right delay is found, on
my machine the delay is 0.98s)
Logs (paste a small part showing an error (< 10 lines) or link a
pastebin, gist, etc. containing more of the log file):
https://pastebin.com/0Wt6uhPF
Config (you can paste only the changes you've made): [mempool] recheck =
false create_empty_block = false
Anything else we need to know: In mempool.go, we found that proposer
will immediately propose new block if
Last committed block has some transaction (causing AppHash to changed)
or mem.notifyTxsAvailable() is called. Our scenario is as followed.
A transaction is fired, it will create 1 block with 1 tx (line 1-4 in
the log) and 1 empty block. After the empty block is proposed but before
it is committed, second transaction is fired and added to mempool. (line
8-16) Now, since the last committed block is empty and
mem.notifyTxsAvailable() will be called only if mempool.recheck = true.
The proposer won't immediately propose new block, causing the second
transaction to stuck in mempool until another transaction is added to
mempool and trigger mem.notifyTxsAvailable().
Within every tx in the mempool, we store a 64 bit counter,
as an index for when it was inserted into the mempool.
This counter doesn't really serve any purpose.
It was likely added for debugging at one point,
Removing the counter reclaims memory,
which enables greater mempool sizes / mitigates resources at the same size.
Closes#2835
* use READ lock/unlock in ConsensusState#GetLastHeight
Refs #2721
* do not use defers when there's no need
* fix peer formatting (output its address instead of the pointer)
```
[54310]: E[11-02|11:59:39.851] Connection failed @ sendRoutine module=p2p peer=0xb78f00 conn=MConn{74.207.236.148:26656} err="pong timeout"
```
https://github.com/tendermint/tendermint/issues/2721#issuecomment-435326581
* panic if peer has no state
https://github.com/tendermint/tendermint/issues/2721#issuecomment-435347165
It's confusing that sometimes we check if peer has a state, but most of
the times we expect it to be there
1. add79700b5/mempool/reactor.go (L138)
2. add79700b5/rpc/core/consensus.go (L196) (edited)
I will change everything to always assume peer has a state and panic
otherwise
that should help identify issues earlier
* abci/localclient: extend lock on app callback
App callback should be protected by lock as well (note this was already
done for InitChainAsync, why not for others???). Otherwise, when we
execute the block, tx might come in and call the callback in the same
time we're updating it in execBlockOnProxyApp => DATA RACE
Fixes#2721
Consensus state is locked
```
goroutine 113333 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00180009c, 0xc0000c7e00)
/usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*RWMutex).RLock(0xc001800090)
/usr/local/go/src/sync/rwmutex.go:50 +0x4e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).GetRoundState(0xc001800000, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:218 +0x46
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).queryMaj23Routine(0xc0017def80, 0x11104a0, 0xc0072488f0, 0xc007248
9c0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:735 +0x16d
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).AddPeer
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:172 +0x236
```
because localClient is locked
```
goroutine 1899 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0xc0000cb500)
/usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
/usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).SetResponseCallback(0xc0001fb560, 0xc007868540)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:32 +0x33
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnConsensus).SetResponseCallback(0xc00002f750, 0xc007868540)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:57 +0x40
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.execBlockOnProxyApp(0x1104e20, 0xc002ca0ba0, 0x11092a0, 0xc00002f750, 0xc0001fe960, 0xc000bfc660, 0x110cfe0, 0xc000090330, 0xc9d12, 0xc000d9d5a0, ...)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:230 +0x1fd
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.(*BlockExecutor).ApplyBlock(0xc002c2a230, 0x7, 0x0, 0xc000eae880, 0x6, 0xc002e52c60, 0x16, 0x1f927, 0xc9d12, 0xc000d9d5a0, ...)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:96 +0x142
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).finalizeCommit(0xc001800000, 0x1f928)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1339 +0xa3e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryFinalizeCommit(0xc001800000, 0x1f928)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1270 +0x451
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit.func1(0xc001800000, 0x0, 0x1f928)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1218 +0x90
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit(0xc001800000, 0x1f928, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1247 +0x6b8
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xc003bc7ad0, 0xc003bc7b10)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1659 +0xbad
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xf1, 0xf1)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1517 +0x59
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg(0xc001800000, 0xd98200, 0xc0070dbed0, 0xc000cf4cc0, 0x28)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:660 +0x64b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine(0xc001800000, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:617 +0x670
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).OnStart
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:311 +0x132
```
tx comes in and CheckTx is executed right when we execute the block
```
goroutine 111044 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0x0)
/usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
/usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).CheckTxAsync(0xc0001fb0e0, 0xc002d94500, 0x13f, 0x280, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:85 +0x47
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnMempool).CheckTxAsync(0xc00002f720, 0xc002d94500, 0x13f, 0x280, 0x1)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:114 +0x51
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool.(*Mempool).CheckTx(0xc002d3a320, 0xc002d94500, 0x13f, 0x280, 0xc0072355f0, 0x0, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool/mempool.go:316 +0x17b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core.BroadcastTxSync(0xc002d94500, 0x13f, 0x280, 0x0, 0x0, 0x0)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core/mempool.go:93 +0xb8
reflect.Value.call(0xd85560, 0x10326c0, 0x13, 0xec7b8b, 0x4, 0xc00663f180, 0x1, 0x1, 0xc00663f180, 0xc00663f188, ...)
/usr/local/go/src/reflect/value.go:447 +0x449
reflect.Value.Call(0xd85560, 0x10326c0, 0x13, 0xc00663f180, 0x1, 0x1, 0x0, 0x0, 0xc005cc9344)
/usr/local/go/src/reflect/value.go:308 +0xa4
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.makeHTTPHandler.func2(0x1102060, 0xc00663f100, 0xc0082d7900)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/handlers.go:269 +0x188
net/http.HandlerFunc.ServeHTTP(0xc002c81f20, 0x1102060, 0xc00663f100, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:1964 +0x44
net/http.(*ServeMux).ServeHTTP(0xc002c81b60, 0x1102060, 0xc00663f100, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:2361 +0x127
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.maxBytesHandler.ServeHTTP(0x10f8a40, 0xc002c81b60, 0xf4240, 0x1102060, 0xc00663f100, 0xc0082d7900)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:219 +0xcf
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.RecoverAndLogHandler.func1(0x1103220, 0xc00121e620, 0xc0082d7900)
/root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:192 +0x394
net/http.HandlerFunc.ServeHTTP(0xc002c06ea0, 0x1103220, 0xc00121e620, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:1964 +0x44
net/http.serverHandler.ServeHTTP(0xc001a1aa90, 0x1103220, 0xc00121e620, 0xc0082d7900)
/usr/local/go/src/net/http/server.go:2741 +0xab
net/http.(*conn).serve(0xc00785a3c0, 0x11041a0, 0xc000f844c0)
/usr/local/go/src/net/http/server.go:1847 +0x646
created by net/http.(*Server).Serve
/usr/local/go/src/net/http/server.go:2851 +0x2f5
```
* consensus: use read lock in Receive#VoteMessage
* use defer to unlock mutex because application might panic
* use defer in every method of the localClient
* add a changelog entry
* drain channels before Unsubscribe(All)
Read 55362ed766/libs/pubsub/pubsub.go (L13)
for the detailed explanation of the issue.
We'll need to fix it someday. Make sure to keep an eye on
https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-033-pubsub.md
* retry instead of panic when peer has no state in reactors other than consensus
in /dump_consensus_state RPC endpoint, skip a peer with no state
* rpc/core/mempool: simplify error messages
* rpc/core/mempool: use time.After instead of timer
also, do not log DeliverTx result (to be consistent with other memthods)
* unlock before calling the callback in reqRes#SetCallback
* fix amino overhead computation for Tx:
- also count the fieldnum / typ3
- add method to compute overhead per Tx
- slightly clarify comment on MaxAminoOverheadForBlock
- add tests
* fix TestReapMaxBytesMaxGas according to amino overhead
* fix TestMempoolFilters according to amino overhead
* address review comments:
- add a note about fieldNum = 1
- add forgotten godoc comment
* fix and use sm.TxPreCheck
* fix test
* remove print statement
* mempool: ErrPreCheck and more log info
* change Pre/PostCheckFunc to return errors
also, continue execution when checking txs in mempool_test if
err=PreCheckErr
This also refactors the prior mempool to filter to be known as
"precheck filter" and this new filter is called "postcheck filter"
This PR also fixes a bug where the precheck filter previously didn't
account for the amino overhead, which could a maliciously sized tx to
halt blocks from getting any txs in them.
* Move maxGas outside of function definition to avoid race condition
* Type filter funcs and make public
* Use helper method for post check
* Remove superfluous Filter suffix
* Move default pre/post checks into package
* Fix broken references
* Fix typos
* Expand on examples for checks
* follow up to removing some consensus params Refs #2382
* change args type to int64 in state#makeParams
* make valsCount and evidenceCount ints again
* MaxEvidenceBytesPerBlock: include magic number in godoc
* [spec] creating a proposal
* test state#TxFilter
* panic if MaxDataBytes is less than 0
* fixes after review
* use amino#UvarintSize to calculate overhead
0c74291f3b/encoder.go (L85-L90)
* avoid cyclic imports
* you can do better Go, come on
* remove testdouble package
* Make mempool aware of MaxGas requirement
* update spec
* Add tests
* Switch GasWanted from kv store to persistent kv store
* Fix typo in test name
* switch back to using kvstore, not persistent kv store
Sam Kleinman
Aleksandr Bezobchuk
Erik Grinaker
Anton Kaliaev
Marko
Erik Grinaker
Phil Salant
Ethan Buchman
Dev Ojha
rickyyangz
Ismail Khoffi
Matthew Slipper
bradyjoestar