Closes: #4530

This PR contains logic for both submitting an evidence by the light client (lite2 package) and receiving it on the Tendermint side (/broadcast_evidence RPC and/or EvidenceReactor#Receive). Upon receiving the ConflictingHeadersEvidence (introduced by this PR), the Tendermint validates it, then breaks it down into smaller pieces (DuplicateVoteEvidence, LunaticValidatorEvidence, PhantomValidatorEvidence, PotentialAmnesiaEvidence). Afterwards, each piece of evidence is verified against the state of the full node and added to the pool, from which it's reaped upon block creation.

* rpc/client: do not pass height param if height ptr is nil

* rpc/core: validate incoming evidence!

* only accept ConflictingHeadersEvidence if one

of the headers is committed from this full node's perspective

This simplifies the code. Plus, if there are multiple forks, we'll
likely to receive multiple ConflictingHeadersEvidence anyway.

* swap CommitSig with Vote in LunaticValidatorEvidence

Vote is needed to validate signature

* no need to embed client

http is a provider and should not be used as a client

for evidence to be considered expired. otherwise, a cabal group can
  manipulate block time to make a particular evidence too old.

Refs https://github.com/tendermint/tendermint/issues/2565#issuecomment-432896645
Refs https://github.com/tendermint/tendermint/issues/2653
spec PR: tendermint/spec#87

Add Has function, create better handling of errors when adding evidence, usage of error types.

Co-authored-by: mergify[bot] <37929162+mergify[bot]@users.noreply.github.com>

* Added BlockStore.DeleteBlock()

* Added initial block pruner prototype

* wip

* Added BlockStore.PruneBlocks()

* Added consensus setting for block pruning

* Added BlockStore base

* Error on replay if base does not have blocks

* Handle missing blocks when sending VoteSetMaj23Message

* Error message tweak

* Properly update blockstore state

* Error message fix again

* blockchain: ignore peer missing blocks

* Added FIXME

* Added test for block replay with truncated history

* Handle peer base in blockchain reactor

* Improved replay error handling

* Added tests for Store.PruneBlocks()

* Fix non-RPC handling of truncated block history

* Panic on missing block meta in needProofBlock()

* Updated changelog

* Handle truncated block history in RPC layer

* Added info about earliest block in /status RPC

* Reorder height and base in blockchain reactor messages

* Updated changelog

* Fix tests

* Appease linter

* Minor review fixes

* Non-empty BlockStores should always have base > 0

* Update code to assume base > 0 invariant

* Added blockstore tests for pruning to 0

* Make sure we don't prune below the current base

* Added BlockStore.Size()

* config: added retain_blocks recommendations

* Update v1 blockchain reactor to handle blockstore base

* Added state database pruning

* Propagate errors on missing validator sets

* Comment tweaks

* Improved error message

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* use ABCI field ResponseCommit.retain_height instead of retain-blocks config option

* remove State.RetainHeight, return value instead

* fix minor issues

* rename pruneHeights() to pruneBlocks()

* noop to fix GitHub borkage

Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>

Previously, many reactors were initialized with the name "Reactor," which made it difficult to log which reactor was doing what. This changes those reactors' names to something more descriptive.

* format: add format cmd & goimport repo

- replaced format command
- added goimports to format command
- ran goimports

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* fix outliers & undo proto file changes

* dep: update tm-db to 0.4.0

- update 0.4.0 as it is a breaking change and cannot be handled by depndabot

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

*  more work towards error handling

* error and emtpy bytes handling

* work on tests

* add changelog entry, change some error handling

* address some pr comments

* panic in a few more places

* move error higher up

* redo some error handling

* fix some bz == nil to len(bz) == 0

* change statebytes

* evidence: introduce time.Duration to evidence params

- add time.duration to evidence
- this pr is taking pr #2606 and updating it to use both time and height

- closes #2565

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* fix testing and genesis cfg in signer harness

* remove debugging fmt

* change maxageheight to maxagenumblocks, rename other things to block instead of height

* further check of duration

* check duration to not send peers outdated evidence

* change some lines, onward and upward

* refactor evidence package

* add a changelog pending entry

* make mockbadevidence have time and use it

* add what could possibly be called a test case

* remove mockbadevidence and mockgoodevidence in favor of mockevidence

* add a comment for err that is returned

* add a changelog for removal of good & bad evidence

* add a test for adding evidence

* fix test

* add ev to types in testcase

* Update evidence/pool_test.go

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* Update evidence/pool_test.go

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* fix tests

* fix linting

Co-authored-by: Anton Kaliaev <anton.kalyaev@gmail.com>

* Fix many golint errors

* Fix golint errors in the 'lite' package

* Don't export Pool.store

* Fix typo

* Revert unwanted changes

* Fix errors in counter package

* Fix linter errors in kvstore package

* Fix linter error in example package

* Fix error in tests package

* Fix linter errors in v2 package

* Fix linter errors in consensus package

* Fix linter errors in evidence package

* Fix linter error in fail package

* Fix linter errors in query package

* Fix linter errors in core package

* Fix linter errors in node package

* Fix linter errors in mempool package

* Fix linter error in conn package

* Fix linter errors in pex package

* Rename PEXReactor export to Reactor

* Fix linter errors in trust package

* Fix linter errors in upnp package

* Fix linter errors in p2p package

* Fix linter errors in proxy package

* Fix linter errors in mock_test package

* Fix linter error in client_test package

* Fix linter errors in coretypes package

* Fix linter errors in coregrpc package

* Fix linter errors in rpcserver package

* Fix linter errors in rpctypes package

* Fix linter errors in rpctest package

* Fix linter error in json2wal script

* Fix linter error in wal2json script

* Fix linter errors in kv package

* Fix linter error in state package

* Fix linter error in grpc_client

* Fix linter errors in types package

* Fix linter error in version package

* Fix remaining errors

* Address review comments

* Fix broken tests

* Reconcile package coregrpc

* Fix golangci bot error

* Fix new golint errors

* Fix broken reference

* Enable golint linter

* minor changes to bring golint into line

* fix failing test

* fix pex reactor naming

* address PR comments

Refs #3262

* Fix long line errors in abci, crypto, and libs packages

* Fix long lines in p2p and rpc packages

* Fix long lines in abci, state, and tools packages

* Fix long lines in behaviour and blockchain packages

* Fix long lines in cmd and config packages

* Begin fixing long lines in consensus package

* Finish fixing long lines in consensus package

* Add lll exclusion for lines containing URLs

* Fix long lines in crypto package

* Fix long lines in evidence package

* Fix long lines in mempool and node packages

* Fix long lines in libs package

* Fix long lines in lite package

* Fix new long line in node package

* Fix long lines in p2p package

* Ignore gocritic warning

* Fix long lines in privval package

* Fix long lines in rpc package

* Fix long lines in scripts package

* Fix long lines in state package

* Fix long lines in tools package

* Fix long lines in types package

* Enable lll linter

* Pin range scope vars

* Don't disable scopelint

This PR repairs linter errors seen when running the following commands:
golangci-lint run --no-config --disable-all=true --enable=scopelint

Contributes to #3262

* tm-cmn to tm-db

* go.mod changes

* go.mod changes

* more go.mod

* fix tm-db

* ci fix, pending change

* Renamed wire.go to codec.go

- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* ide error

* rename amino.go to codec.go

* Remove db from tendemrint in favor of tendermint/tm-cmn

- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
	- https://github.com/grpc/grpc-go/releases
	- https://github.com/golang/protobuf/releases

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* changelog add

* gofmt

* more gofmt

- Govet issues fixed
- 1 gosec issue solved using nolint

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* fix peer state init to late

Peer does not have a state yet. We set it in AddPeer.
We need an new interface before mconnection is started

* pex message to soon

fix reconnection pex send too fast,
error is caused lastReceivedRequests is still
not deleted when a peer reconnected

* add test case for initpeer

* add prove case

* remove potentially infinite loop

* Update consensus/reactor.go

Co-Authored-By: guagualvcha <baifudong@lancai.cn>

* Update consensus/reactor_test.go

Co-Authored-By: guagualvcha <baifudong@lancai.cn>

* document Reactor interface better

* refactor TestReactorReceiveDoesNotPanicIfAddPeerHasntBeenCalledYet

* fix merge conflicts

* blockchain: remove peer's ID from the pool in InitPeer

Refs #3338

* pex: resetPeersRequestsInfo both upon InitPeer and RemovePeer

* ensure RemovePeer is always called before InitPeer

by removing the peer from the switch last (after we've stopped it and
removed from all reactors)

* add some comments for ConsensusReactor#InitPeer

* fix pex reactor

* format code

* fix spelling

* update changelog

* remove unused methods

* do not clear lastReceivedRequests upon error

only in RemovePeer

* call InitPeer before we start the peer!

* add a comment to InitPeer

* write a test

* use waitUntilSwitchHasAtLeastNPeers func

* bring back timeouts

* Test to ensure Receive panics if InitPeer has not been called

* evidence: NewEvidencePool takes evidenceDB

* evidence: failing TestStoreCommitDuplicate

tendermint/security#35

* GetEvidence -> GetEvidenceInfo

* fix TestStoreCommitDuplicate

* comment in VerifyEvidence

* add check if evidence was already seen
 - modify EventPool interface (EventStore is not known in ApplyBlock):
   - add IsCommitted method to iface
 - add test

* update changelog

* fix TestStoreMark:
 - priority in evidence info gets reset to zero after evidence gets committed

* review comments: simplify EvidencePool.IsCommitted
 - delete obsolete EvidenceStore.IsCommitted

* add simple test for IsCommitted

* update changelog: this is actually breaking (PR number still missing)

* fix TestStoreMark:
 - priority in evidence info gets reset to zero after evidence gets
 committed

* review suggestion: simplify return

Don't add committed evidence to evpool

in the attempt to fix https://circleci.com/gh/tendermint/tendermint/43165

also

    code is simplified by running gofmt -s .
    remove unused vars
    enable linters we're currently passing
    remove deprecated linters

As per conversation here: https://github.com/tendermint/tendermint/pull/3218#discussion_r251364041

This is the result of running the following code on the repo:

```bash
find . -name '*.go' | grep -v 'vendor/' | xargs -n 1 goimports -w
```

* consensus: createProposalBlock function

* blockExecutor.CreateProposalBlock

- factored out of consensus pkg into a method on blockExec
- new private interfaces for mempool ("txNotifier") and evpool with one function each
- consensus tests still require more mempool methods

* failing test for CreateProposalBlock

* Fix bug in include evidece into block

* evidence: change maxBytes to maxSize

* MaxEvidencePerBlock

- changed to return both the max number and the max bytes
- preparation for #2590

* changelog

* fix linter

* Fix from review

Co-Authored-By: ebuchman <ethan@coinculture.info>

- rename fields, methods, comments, tests

* fix fastsync may stuck by a wrong block

* fixes from updates

* fixes from review

* Align spec with the changes

* fmt

* use READ lock/unlock in ConsensusState#GetLastHeight

Refs #2721

* do not use defers when there's no need

* fix peer formatting (output its address instead of the pointer)

```
[54310]: E[11-02|11:59:39.851] Connection failed @ sendRoutine              module=p2p peer=0xb78f00 conn=MConn{74.207.236.148:26656} err="pong timeout"
```

https://github.com/tendermint/tendermint/issues/2721#issuecomment-435326581

* panic if peer has no state

https://github.com/tendermint/tendermint/issues/2721#issuecomment-435347165

It's confusing that sometimes we check if peer has a state, but most of
the times we expect it to be there

1. add79700b5/mempool/reactor.go (L138)
2. add79700b5/rpc/core/consensus.go (L196) (edited)

I will change everything to always assume peer has a state and panic
otherwise

that should help identify issues earlier

* abci/localclient: extend lock on app callback

App callback should be protected by lock as well (note this was already
done for InitChainAsync, why not for others???). Otherwise, when we
execute the block, tx might come in and call the callback in the same
time we're updating it in execBlockOnProxyApp => DATA RACE

Fixes #2721

Consensus state is locked

```
goroutine 113333 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00180009c, 0xc0000c7e00)
        /usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*RWMutex).RLock(0xc001800090)
        /usr/local/go/src/sync/rwmutex.go:50 +0x4e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).GetRoundState(0xc001800000, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:218 +0x46
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).queryMaj23Routine(0xc0017def80, 0x11104a0, 0xc0072488f0, 0xc007248
9c0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:735 +0x16d
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusReactor).AddPeer
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/reactor.go:172 +0x236
```

because localClient is locked

```
goroutine 1899 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0xc0000cb500)
        /usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
        /usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).SetResponseCallback(0xc0001fb560, 0xc007868540)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:32 +0x33
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnConsensus).SetResponseCallback(0xc00002f750, 0xc007868540)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:57 +0x40
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.execBlockOnProxyApp(0x1104e20, 0xc002ca0ba0, 0x11092a0, 0xc00002f750, 0xc0001fe960, 0xc000bfc660, 0x110cfe0, 0xc000090330, 0xc9d12, 0xc000d9d5a0, ...)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:230 +0x1fd
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state.(*BlockExecutor).ApplyBlock(0xc002c2a230, 0x7, 0x0, 0xc000eae880, 0x6, 0xc002e52c60, 0x16, 0x1f927, 0xc9d12, 0xc000d9d5a0, ...)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/state/execution.go:96 +0x142
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).finalizeCommit(0xc001800000, 0x1f928)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1339 +0xa3e
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryFinalizeCommit(0xc001800000, 0x1f928)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1270 +0x451
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit.func1(0xc001800000, 0x0, 0x1f928)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1218 +0x90
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).enterCommit(0xc001800000, 0x1f928, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1247 +0x6b8
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).addVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xc003bc7ad0, 0xc003bc7b10)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1659 +0xbad
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).tryAddVote(0xc001800000, 0xc003d8dea0, 0xc000cf4cc0, 0x28, 0xf1, 0xf1, 0xf1)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:1517 +0x59
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).handleMsg(0xc001800000, 0xd98200, 0xc0070dbed0, 0xc000cf4cc0, 0x28)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:660 +0x64b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).receiveRoutine(0xc001800000, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:617 +0x670
created by github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus.(*ConsensusState).OnStart
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/consensus/state.go:311 +0x132
```

tx comes in and CheckTx is executed right when we execute the block

```
goroutine 111044 [semacquire, 309 minutes]:
sync.runtime_SemacquireMutex(0xc00003363c, 0x0)
        /usr/local/go/src/runtime/sema.go:71 +0x3d
sync.(*Mutex).Lock(0xc000033638)
        /usr/local/go/src/sync/mutex.go:134 +0xff
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client.(*localClient).CheckTxAsync(0xc0001fb0e0, 0xc002d94500, 0x13f, 0x280, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/abci/client/local_client.go:85 +0x47
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy.(*appConnMempool).CheckTxAsync(0xc00002f720, 0xc002d94500, 0x13f, 0x280, 0x1)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/proxy/app_conn.go:114 +0x51
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool.(*Mempool).CheckTx(0xc002d3a320, 0xc002d94500, 0x13f, 0x280, 0xc0072355f0, 0x0, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/mempool/mempool.go:316 +0x17b
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core.BroadcastTxSync(0xc002d94500, 0x13f, 0x280, 0x0, 0x0, 0x0)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/core/mempool.go:93 +0xb8
reflect.Value.call(0xd85560, 0x10326c0, 0x13, 0xec7b8b, 0x4, 0xc00663f180, 0x1, 0x1, 0xc00663f180, 0xc00663f188, ...)
        /usr/local/go/src/reflect/value.go:447 +0x449
reflect.Value.Call(0xd85560, 0x10326c0, 0x13, 0xc00663f180, 0x1, 0x1, 0x0, 0x0, 0xc005cc9344)
        /usr/local/go/src/reflect/value.go:308 +0xa4
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.makeHTTPHandler.func2(0x1102060, 0xc00663f100, 0xc0082d7900)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/handlers.go:269 +0x188
net/http.HandlerFunc.ServeHTTP(0xc002c81f20, 0x1102060, 0xc00663f100, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:1964 +0x44
net/http.(*ServeMux).ServeHTTP(0xc002c81b60, 0x1102060, 0xc00663f100, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:2361 +0x127
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.maxBytesHandler.ServeHTTP(0x10f8a40, 0xc002c81b60, 0xf4240, 0x1102060, 0xc00663f100, 0xc0082d7900)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:219 +0xcf
github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server.RecoverAndLogHandler.func1(0x1103220, 0xc00121e620, 0xc0082d7900)
        /root/go/src/github.com/MinterTeam/minter-go-node/vendor/github.com/tendermint/tendermint/rpc/lib/server/http_server.go:192 +0x394
net/http.HandlerFunc.ServeHTTP(0xc002c06ea0, 0x1103220, 0xc00121e620, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:1964 +0x44
net/http.serverHandler.ServeHTTP(0xc001a1aa90, 0x1103220, 0xc00121e620, 0xc0082d7900)
        /usr/local/go/src/net/http/server.go:2741 +0xab
net/http.(*conn).serve(0xc00785a3c0, 0x11041a0, 0xc000f844c0)
        /usr/local/go/src/net/http/server.go:1847 +0x646
created by net/http.(*Server).Serve
        /usr/local/go/src/net/http/server.go:2851 +0x2f5
```

* consensus: use read lock in Receive#VoteMessage

* use defer to unlock mutex because application might panic

* use defer in every method of the localClient

* add a changelog entry

* drain channels before Unsubscribe(All)

Read 55362ed766/libs/pubsub/pubsub.go (L13)
for the detailed explanation of the issue.

We'll need to fix it someday. Make sure to keep an eye on
https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-033-pubsub.md

* retry instead of panic when peer has no state in reactors other than consensus

in /dump_consensus_state RPC endpoint, skip a peer with no state

* rpc/core/mempool: simplify error messages

* rpc/core/mempool: use time.After instead of timer

also, do not log DeliverTx result (to be consistent with other memthods)

* unlock before calling the callback in reqRes#SetCallback

Fixes #2740

* validate reactor messages

Refs #2683

* validate blockchain messages

Refs #2683

* validate evidence messages

Refs #2683

* todo

* check ProposalPOL and signature sizes

* add a changelog entry

* check addr is valid when we add it to the addrbook

* validate incoming netAddr (not just nil check!)

* fixes after Bucky's review

* check timestamps

* beef up block#ValidateBasic

* move some checks into bcBlockResponseMessage

* update Gopkg.lock

Fix

```
grouped write of manifest, lock and vendor: failed to export github.com/tendermint/go-amino: fatal: failed to unpack tree object 6dcc6ddc14
```

by running `dep ensure -update`

* bump year since now we check it

* generate test/p2p/data on the fly using tendermint testnet

* allow sync chains older than 1 year

* use full path when creating a testnet

* move testnet gen to test/docker/Dockerfile

* relax LastCommitRound check

Refs #2737

* fix conflicts after merge

* add small comment

* some ValidateBasic updates

* fixes

* AppHash length is not fixed

* Add ValidatorPubkeyTypes as a consensus param

Ref #2414

* update spec

* address anton's comment

* Switch to Validator and Validator Params

* Correct changelog entry

* Address bucky's comments!

* forgot to update changelog

* fix typo

* fix Params naming

Closes #2525

Also make reversing a slice more efficient

* follow up to removing some consensus params Refs #2382
* change args type to int64 in state#makeParams
* make valsCount and evidenceCount ints again
* MaxEvidenceBytesPerBlock: include magic number in godoc
* [spec] creating a proposal
* test state#TxFilter
* panic if MaxDataBytes is less than 0
* fixes after review
* use amino#UvarintSize to calculate overhead
0c74291f3b/encoder.go (L85-L90)
* avoid cyclic imports
* you can do better Go, come on
* remove testdouble package

* Implement BFT time

* set LastValidators when creating state in state helper

for heights >= 2

See ADR 020: Limiting txs size inside a block docs/architecture/adr-020-block-size.md

Refs #2035

* libs: Remove usage of custom Fmt, in favor of fmt.Sprintf

Closes #2193

* Fix bug that was masked by custom Fmt!

* Removed unnecessary onStart & onStop calls in reactor

* Refactor OnStart & OnStop in reactor

* Removed redundant OnStart func in reactor

Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.

Ref discussion: https://github.com/tendermint/tendermint/pull/1966

Closes #1956

This reverts commit d02c5d1e30.

Refs #646

except now we calculate the max size using the maxPacketMsgSize()
function, which frees developers from having to know amino encoding
details.

plus, 10 additional bytes are added to leave the room for amino upgrades
(both making it more efficient / less efficient)

This reverts commit 96a3502