If the e2e tests error, they leave all of the e2e state around including containers and networks etc.
We should clean this up when the tests shuts down, even if it exits in error.
This should address last night's failure. We've taken the perspective
of "the load generator shouldn't cause tests to fail" in recent
days/weeks, and I think this is just a next step along that line. The
e2e tests shouldn't test performance.
I included some comments indicating the ways that this isn't ideal (it
is perhaps not), and I think that if test networks could make
assertions about the required rate, that might be a cool future
improvement (and good, perhaps, for system benchmarking.)
This document attempts to capture and discuss some of the areas of Tendermint that seem to be cited as causing performance issue. I'm hoping to continue to gather feedback and input on this document to better understand what issues Tendermint performance may cause for our users.
The overall goal of this document is to allow the maintainers and community to get a better sense of these issues and to be more capably able to discuss them and weight trade-offs about any proposed performance-focused changes. This document does not aim to propose any performance improvements. It does suggest useful places for benchmarks and places where additional metrics would be useful for diagnosing and further understanding Tendermint performance.
Please comment with areas where my reasoning seems off or with additional areas that Tendermint performance may be causing user pain.
I think the `Sync` check covers our primary use case, and perhaps we
can turn this back on in the future after some kind of event-system
rewrite, or RPC rewrite that will avoid the serverside timeout.
These are mostly the timeouts that I think we're still hitting in CI.
At this point, the tests (on master) pass on my local machine (which is quite beefy) so I think this is just the first in (perhaps?) a sequence of changes that attempt to change timeouts and load patterns so that the tests pass in CI more reliably.
Communication in Tendermint among consensus nodes, applications, and operator
tools all use different message formats and transport mechanisms. In some
cases there are multiple options. Having all these options complicates both the
code and the developer experience, and hides bugs. To support a more robust,
trustworthy, and usable system, we should document which communication paths
are essential, which could be removed or reduced in scope, and what we can
improve for the most important use cases.
This document proposes a variety of possible improvements of varying size and
scope. Specific design proposals should get their own documentation.
The previous implemention of hybrid set testing, which was entirely my
own creation, was a bit peculiar, and I think this probably clears thins up.
The previous implementation had far fewer legacy nodes in hybrid
networks, *and* also for some reason that I can't quite explain,
caused a test case to fail.
Bumps [github.com/rs/zerolog](https://github.com/rs/zerolog) from 1.24.0 to 1.25.0.
<details>
<summary>Commits</summary>
<ul>
<li><a href="65adfd88ec"><code>65adfd8</code></a> Make Fields method accept both map and slice (<a href="https://github-redirect.dependabot.com/rs/zerolog/issues/352">#352</a>)</li>
<li>See full diff in <a href="https://github.com/rs/zerolog/compare/v1.24.0...v1.25.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
The responses from node RPCs encode hash values as hexadecimal strings. This
behaviour is stipulated in our OpenAPI documentation. In some cases, however,
hashes received as JSON parameters were being decoded as byte buffers, as is
the convention for JSON.
This resulted in the confusing situation that a hash reported by one request
(e.g., broadcast_tx_commit) could not be passed as a parameter to another
(e.g., tx) via JSON, without translating the hex-encoded output hash into the
base64 encoding used by JSON for opaque bytes.
Fixes#6802.
The 0.35 release cycle renamed the 'fastsync' functionality to 'blocksync'. This change brings the configuration parameters in line with that change. Namely, it updates the configuration file `[fastsync]` field to be `[blocksync]` and changes the command line flag and config file parameters `--fast-sync` and `fast-sync` to `--enable-block-sync` and `enable-block-sync` respectively.
Error messages were added to help users encountering these changes be able to quickly make the needed update to their files/scripts.
When using the old command line argument for fast-sync, the following is printed
```
./build/tendermint start --proxy-app=kvstore --consensus.create-empty-blocks=false --fast-sync=false
ERROR: invalid argument "false" for "--fast-sync" flag: --fast-sync has been deprecated, please use --enable-block-sync
```
When using one of the old config file parameters, the following is printed:
```
./build/tendermint start --proxy-app=kvstore --consensus.create-empty-blocks=false
ERROR: error in config file: a configuration parameter named 'fast-sync' was found in the configuration file. The 'fast-sync' parameter has been renamed to 'enable-block-sync', please update the 'fast-sync' field in your configuration file to 'enable-block-sync'
```
* add information on upgrading to the new p2p library
* clarify p2p backwards compatibility
* reorder p2p queue list
* add demo for p2p selection
* fix spacing in upgrading
This is a cosmetic change that restores lexicographic order to the selected
linters in the CI config. No change to which linters we run, only putting them
back in order so it's easier to spot the one you care about.
This changes the focus of the e2e suite, to (roughly) focus on
configurations that are more well used. Most production users of
tendermint run ABCI application in process and the GRPC/socket methods
cover the vast majority of the remaining use cases.
Perhaps we should consider drop support unix domain sockets in a
future release, but I think in the mean time it's useful to have the
tests *mostly* focus on the primary use cases.
Update the schema and implementation of the Postgres event indexer to improve
certain types of queries against the index. These changes address the use cases
raised by #6843, and are partly inspired by the prototype schema in that issue.
In the old schema, events were flattened, making it difficult to find all the events
associated with a particular block or transaction. In addition, events with no key/value
attributes were entirely lost, since entries were generated only for attributes.
To address these issues, this new schema records blocks, transactions, events,
and attributes in separate tables, and provides views that join these tables to
give a more convenient query surface for block and transaction events.
- All events for a given block can be queried from the `block_events` view.
- All events for a given transaction can be queried from the `tx_events` view.
- Multiple events for the same key can be indexed for both blocks and transactions.
The tests have been reworked, but all of the existing test cases for the old schema
still pass with the new implementation. Various other minor cleanups are included,
ADR-065 is also updated to reflect the updated schema.
William Banfield
Sam Kleinman
dependabot[bot]
Callum Waters
M. J. Fromberger
Peter Lai