* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
## Description
Refs #2659
Breaking changes in the mempool package:
[mempool] #2659 Mempool now an interface
old Mempool renamed to CListMempool
NewMempool renamed to NewCListMempool
Option renamed to CListOption
MempoolReactor renamed to Reactor
NewMempoolReactor renamed to NewReactor
unexpose TxID method
TxInfo.PeerID renamed to SenderID
unexpose MempoolReactor.Mempool
Breaking changes in the state package:
[state] #2659 Mempool interface moved to mempool package
MockMempool moved to top-level mock package and renamed to Mempool
Non Breaking changes in the node package:
[node] #2659 Add Mempool method, which allows you to access mempool
## Commits
* move Mempool interface into mempool package
Refs #2659
Breaking changes in the mempool package:
- Mempool now an interface
- old Mempool renamed to CListMempool
Breaking changes to state package:
- MockMempool moved to mempool/mock package and renamed to Mempool
- Mempool interface moved to mempool package
* assert CListMempool impl Mempool
* gofmt code
* rename MempoolReactor to Reactor
- combine everything into one interface
- rename TxInfo.PeerID to TxInfo.SenderID
- unexpose MempoolReactor.Mempool
* move mempool mock into top-level mock package
* add a fixme
TxsFront should not be a part of the Mempool interface
because it leaks implementation details. Instead, we need to come up
with general interface for querying the mempool so the MempoolReactor
can fetch and broadcast txs to peers.
* change node#Mempool to return interface
* save commit = new reactor arch
* Revert "save commit = new reactor arch"
This reverts commit 1bfceacd9d.
* require CListMempool in mempool.Reactor
* add two changelog entries
* fixes after my own review
* quote interfaces, structs and functions
* fixes after Ismail's review
* make node's mempool an interface
* make InitWAL/CloseWAL methods a part of Mempool interface
* fix merge conflicts
* make node's mempool an interface
As per #3043, this adds a ticker to sync the WAL every 2s while the WAL is running.
* Flush WAL every 2s
This adds a ticker that flushes the WAL every 2s while the WAL is
running. This is related to #3043.
* Fix spelling
* Increase timeout to 2mins for slower build environments
* Make WAL sync interval configurable
* Add TODO to replace testChan with more comprehensive testBus
* Remove extraneous debug statement
* Remove testChan in favour of using system time
As per
https://github.com/tendermint/tendermint/pull/3300#discussion_r255886586,
this removes the `testChan` WAL member and replaces the approach with a
system time-oriented one. In this new approach, we keep track of the
system time at which each flush and periodic flush successfully
occurred.
The naming of the various functions is also updated here to be more
consistent with "flushing" as opposed to "sync'ing".
* Update naming convention and ensure lock for timestamp update
* Add Flush method as part of WAL interface
Adds a `Flush` method as part of the WAL interface to enforce the idea
that we can manually trigger a WAL flush from outside of the WAL. This
is employed in the consensus state management to flush the WAL prior to
signing votes/proposals, as per https://github.com/tendermint/tendermint/issues/3043#issuecomment-453853630
* Update CHANGELOG_PENDING
* Remove mutex approach and replace with DI
The dependency injection approach to dealing with testing concerns could
allow similar effects to some kind of "testing bus"-based approach. This
commit introduces an example of this, where instead of relying on
(potentially fragile) timing of things between the code and the test, we
inject code into the function under test that can signal the test
through a channel.
This allows us to avoid the `time.Sleep()`-based approach previously
employed.
* Update comment on WAL flushing during vote signing
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Simplify flush interval definition
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Expand commentary on WAL disk flushing
Co-Authored-By: thanethomson <connect@thanethomson.com>
* Add broken test to illustrate WAL sync test problem
Removes test-related state (dependency injection code) from the WAL data
structure and adds test code to illustrate the problem with using
`WALGenerateNBlocks` and `wal.SearchForEndHeight` to test periodic
sync'ing.
* Fix test error messages
* Use WAL group buffer size to check for flush
A function is added to `libs/autofile/group.go#Group` in order to return
the size of the buffered data (i.e. data that has not yet been flushed
to disk). The test now checks that, prior to a `time.Sleep`, the group
buffer has data in it. After the `time.Sleep` (during which time the
periodic flush should have been called), the buffer should be empty.
* Remove config root dir removal from #3291
* Add godoc for NewWAL mentioning periodic sync
* improve ResetTestRootWithChainID() concurrency safety
Rely on ioutil.TempDir() to create test root directories and ensure
multiple same-chain id test cases can run in parallel.
* Update config/toml.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* clean up test directories after completion
Closes: #1034
* Remove redundant EnsureDir call
* s/PanicSafety()/panic()/s
* Put create dir functionality back in ResetTestRootWithChainID
* Place test directories in OS's tempdir
In modern UNIX and UNIX-like systems /tmp is very often
mounted as tmpfs. This might speed test execution a bit.
* Set 0700 to a const
* rootsDirs -> configRootDirs
* Don't double remove directories
* Avoid global variables
* Fix consensus tests
* Reduce defer stack
* Address review comments
* Try to fix tests
* Update CHANGELOG_PENDING.md
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* Update consensus/common_test.go
Co-Authored-By: alessio <quadrispro@ubuntu.com>
* split immutable and mutable parts of priv_validator.json
* fix bugs
* minor changes
* retrig test
* delete scripts/wire2amino.go
* fix test
* fixes from review
* privval: remove mtx
* rearrange priv_validator.go
* upgrade path
* write tests for the upgrade
* fix for unsafe_reset_all
* add test
* add reset test
* fix Group.RotateFile need call Flush() before rename. #2428
* fix some review issue. #2428
refactor Group's config: replace setting member with initial option
* fix a handwriting mistake
* fix a time window error between rename and write.
* fix a syntax mistake.
* change option name Get_ to With_
* fix review issue
* fix review issue
Handshaker was removed from proxy package so it can be called
independently of starting the abci app connections and can return a
result to the caller.
This is a maintenance change to move the private validator package out
of the types and to a top-level location. There is no good reason to
keep it under the types and it will more clearly coommunicate where
additions related to the privval belong. It leaves the interface and the
mock in types for now as it would introduce circular dependency between
privval and types, this should be resolved eventually.
* mv priv_validator to privval pkg
* use consistent `privval` as import
Follow-up to #1255
Marko
Anca Zamfir
Anton Kaliaev
JamesRay
Thane Thomson
Alessio Treglia
yutianwu
Ethan Buchman
goolAdapter
Dev Ojha
Zach Ramsay
Alexander Simmerl
Liamsi
Thomas Corbière
Jae Kwon
Ethan Frey