As a safety measure, don't allow a query string to be unreasonably
long. The query filter is not especially efficient, so a query that
needs more than basic detail should filter coarsely in the subscriber
and refine on the client side.
This affects Subscribe and TxSearch queries.
This follows the same model as we did in the p2p package.
Rework the indexer service constructor to take a struct of arguments,
that makes it easier to construct the optional settings.
Deprecate but do not remove the existing constructor.
Clean up node initialization a little bit.
This is part of the work described by #7156.
Remove "unbuffered subscriptions" from the pubsub service.
Replace them with a dedicated blocking "observer" mechanism.
Use the observer mechanism for indexing.
Add a SubscribeWithArgs method and deprecate the old Subscribe
method. Remove SubscribeUnbuffered entirely (breaking).
Rework the Subscription interface to eliminate exposed channels.
Subscriptions now use a context to manage lifecycle notifications.
Internalize the eventbus package.
Updates #7156, and a follow-up to #7070.
Event subscriptions in Tendermint currently use a fixed-length Go
channel as a queue. When the channel fills up, the publisher
immediately terminates the subscription. This prevents slow
subscribers from creating memory pressure on the node by not
servicing their queue fast enough.
Replace the buffered channel used to deliver events to buffered
subscribers with an explicit queue. The queue provides a soft
quota and burst credit mechanism: Clients that usually keep up
can survive occasional bursts, without allowing truly slow
clients to hog resources indefinitely.
The main (and minor) win of this PR is that the transport is fully the
responsibility of the router and the node doesn't need to be responsible for its lifecylce.
I saw one of these tests fail and it looks like it was using code that
wasn't being called anywhere, so I deleted it, and avoided the package
name aliasing.
This pull request adds a new "mesage_type" label to the send/recv bytes metrics calculated in the p2p code.
Below is a snippet of the updated metrics that includes the updated label:
```
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_HasVote",peer_id="2551a13ed720101b271a5df4816d1e4b3d3bd133"} 652
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_HasVote",peer_id="4b1068420ef739db63377250553562b9a978708a"} 631
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_HasVote",peer_id="927c50a5e508c747830ce3ba64a3f70fdda58ef2"} 631
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_NewRoundStep",peer_id="2551a13ed720101b271a5df4816d1e4b3d3bd133"} 393
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_NewRoundStep",peer_id="4b1068420ef739db63377250553562b9a978708a"} 357
tendermint_p2p_peer_receive_bytes_total{chID="32",chain_id="ci",message_type="consensus_NewRoundStep",peer_id="927c50a5e508c747830ce3ba64a3f70fdda58ef2"} 386
```
This pull request fixes a panic that exists in both mempools. The panic occurs when the ABCI client misses a response from the ABCI application. This happen when the ABCI client drops the request as a result of a full client queue. The fix here was to loop through the ordered list of recheck-tx in the callback until one matches the currently observed recheck request.
This is, perhaps, the trival final piece of #7075 that I've been
working on.
There's more work to be done:
- push more of the setup into the pacakges themselves
- move channel-based sending/filtering out of the
- simplify the buffering throuhgout the p2p stack.
This change removes the partial gRPC interface to the RPC service, which was
deprecated in resolution of #6718.
Details:
- rpc: Remove the client and server interfaces and proto definitions.
- Remove the gRPC settings from the config library.
- Remove gRPC setup for the RPC service in the node startup.
- Fix various test helpers to remove gRPC bits.
- Remove the --rpc.grpc-laddr flag from the CLI.
Note that to satisfy the protobuf interface check, this change also includes a
temporary edit to buf.yaml, that I will revert after this is merged.
This metric describes itself as 'pending' but never actual decrements when the messages are removed from the queue.
This change fixes that by decrementing the metric when the data is removed from the queue.
This PR adds an initial set of metrics for use ABCI. The initial metrics enable the calculation of timing histograms and call counts for each of the ABCI methods. The metrics are also labeled as either 'sync' or 'async' to determine if the method call was performed using ABCI's `*Async` methods.
An example of these metrics is included here for reference:
```
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0001"} 0
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.0004"} 5
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.002"} 12
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.009"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.02"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.1"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="0.65"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="2"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="6"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="25"} 13
tendermint_abci_connection_method_timing_bucket{chain_id="ci",method="commit",type="sync",le="+Inf"} 13
tendermint_abci_connection_method_timing_sum{chain_id="ci",method="commit",type="sync"} 0.007802058000000001
tendermint_abci_connection_method_timing_count{chain_id="ci",method="commit",type="sync"} 13
```
These metrics can easily be graphed using prometheus's `histogram_quantile(...)` method to pick out a particular quantile to graph or examine. I chose buckets that were somewhat of an estimate of expected range of times for ABCI operations. They start at .0001 seconds and range to 25 seconds. The hope is that this range captures enough possible times to be useful for us and operators.
Addresses one of the concerns with #7041.
Provides a mechanism (via the RPC interface) to delete a single transaction, described by its hash, from the mempool. The method returns an error if the transaction cannot be found. Once the transaction is removed it remains in the cache and cannot be resubmitted until the cache is cleared or it expires from the cache.
This code hasn't been battle tested, and seems to have grown
increasingly flaky int tests. Given our general direction of reducing
queue complexity over the next couple of releases I think it makes
sense to remove it.
A few notes:
- this is not all the deletion that we can do, but this is the most
"simple" case: it leaves in shims, and there's some trivial
additional cleanup to the transport that can happen but that
requires writing more code, and I wanted this to be easy to review
above all else.
- This should land *after* we cut the branch for 0.35, but I'm
anticipating that to happen soon, and I wanted to run this through
CI.
The race occurred as a result of a goroutine launched by `processPeerUpdate` racing with the `OnStop` method. The `processPeerUpdates` goroutine deletes from the map as `OnStop` is reading from it. This change updates the `OnStop` method to wait for the peer updates channel to be done before closing the peers. It also copies the map contents to a new map so that it will not conflict with the view of the map that the goroutine created in `processPeerUpdate` sees.
This commit should be one of the first to land as part of the v0.36
cycle *after* cutting the 0.35 branch.
The blocksync/v2 reactor was originally implemented as an experiement
to produce an implementation of the blockstack protocol that would be
easier to test and validate, but it was never appropriately
operationalized and this implementation was never fully debugged. When
the p2p layer was refactored as part of the 0.35 cycle, the v2
implementation was not refactored and it was left in the codebase but
not removed. This commit just removes all references to it.
This is intended to fix a test failure that occurs in the p2p state provider. The issue presents as the state provider timing out waiting for the consensus params response.
The reason that this can occur is because the statesync reactor has the possibility of attempting to respond to the params request before the state provider is ready to read it. This results in the reactor hitting the `default` case seen here and then never sending on the channel. The stateprovider will then block waiting for a response and never receive one because the reactor opted not to send it.
When statesync is stopped during shutdown, it has the possibility of deadlocking. A dump of goroutines reveals that this is related to the peerUpdates channel not returning anything on its `Done()` channel when `OnStop` is called. As this is occuring, `processPeerUpdate` is attempting to acquire the reactor lock. It appears that this lock can never be acquired. I looked for the places where the lock may remain locked accidentally and cleaned them up in hopes to eradicate the issue. Dumps of the relevant goroutines may be found below. Note that the line numbers below are relative to the code in the `v0.35.0-rc1` tag.
```
goroutine 36 [chan receive]:
github.com/tendermint/tendermint/internal/statesync.(*Reactor).OnStop(0xc00058f200)
github.com/tendermint/tendermint/internal/statesync/reactor.go:243 +0x117
github.com/tendermint/tendermint/libs/service.(*BaseService).Stop(0xc00058f200, 0x0, 0x0)
github.com/tendermint/tendermint/libs/service/service.go:171 +0x323
github.com/tendermint/tendermint/node.(*nodeImpl).OnStop(0xc0001ea240)
github.com/tendermint/tendermint/node/node.go:769 +0x132
github.com/tendermint/tendermint/libs/service.(*BaseService).Stop(0xc0001ea240, 0x0, 0x0)
github.com/tendermint/tendermint/libs/service/service.go:171 +0x323
github.com/tendermint/tendermint/cmd/tendermint/commands.NewRunNodeCmd.func1.1()
github.com/tendermint/tendermint/cmd/tendermint/commands/run_node.go:143 +0x62
github.com/tendermint/tendermint/libs/os.TrapSignal.func1(0xc000629500, 0x7fdb52f96358, 0xc0002b5030, 0xc00000daa0)
github.com/tendermint/tendermint/libs/os/os.go:26 +0x102
created by github.com/tendermint/tendermint/libs/os.TrapSignal
github.com/tendermint/tendermint/libs/os/os.go:22 +0xe6
goroutine 188 [semacquire]:
sync.runtime_SemacquireMutex(0xc00026b1cc, 0x0, 0x1)
runtime/sema.go:71 +0x47
sync.(*Mutex).lockSlow(0xc00026b1c8)
sync/mutex.go:138 +0x105
sync.(*Mutex).Lock(...)
sync/mutex.go:81
sync.(*RWMutex).Lock(0xc00026b1c8)
sync/rwmutex.go:111 +0x90
github.com/tendermint/tendermint/internal/statesync.(*Reactor).processPeerUpdate(0xc00026b080, 0xc000650008, 0x28, 0x124de90, 0x4)
github.com/tendermint/tendermint/internal/statesync/reactor.go:849 +0x1a5
github.com/tendermint/tendermint/internal/statesync.(*Reactor).processPeerUpdates(0xc00026b080)
github.com/tendermint/tendermint/internal/statesync/reactor.go:883 +0xab
created by github.com/tendermint/tendermint/internal/statesync.(*Reactor.OnStart
github.com/tendermint/tendermint/internal/statesync/reactor.go:219 +0xcd)
```
When shutting down blocksync, it is observed that the process can hang completely. A dump of running goroutines reveals that this is due to goroutines not listening on the correct shutdown signal. Namely, the `poolRoutine` goroutine does not wait on `pool.Quit`. The `poolRoutine` does not receive any other shutdown signal during `OnStop` becuase it must stop before the `r.closeCh` is closed. Currently the `poolRoutine` listens in the `closeCh` which will not close until the `poolRoutine` stops and calls `poolWG.Done()`.
This change also puts the `requestRoutine()` in the `OnStart` method to make it more visible since it does not rely on anything that is spawned in the `poolRoutine`.
```
goroutine 183 [semacquire]:
sync.runtime_Semacquire(0xc0000d3bd8)
runtime/sema.go:56 +0x45
sync.(*WaitGroup).Wait(0xc0000d3bd0)
sync/waitgroup.go:130 +0x65
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStop(0xc0000d3a00)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:193 +0x47
github.com/tendermint/tendermint/libs/service.(*BaseService).Stop(0xc0000d3a00, 0x0, 0x0)
github.com/tendermint/tendermint/libs/service/service.go:171 +0x323
github.com/tendermint/tendermint/node.(*nodeImpl).OnStop(0xc00052c000)
github.com/tendermint/tendermint/node/node.go:758 +0xc62
github.com/tendermint/tendermint/libs/service.(*BaseService).Stop(0xc00052c000, 0x0, 0x0)
github.com/tendermint/tendermint/libs/service/service.go:171 +0x323
github.com/tendermint/tendermint/cmd/tendermint/commands.NewRunNodeCmd.func1.1()
github.com/tendermint/tendermint/cmd/tendermint/commands/run_node.go:143 +0x62
github.com/tendermint/tendermint/libs/os.TrapSignal.func1(0xc000df6d20, 0x7f04a68da900, 0xc0004a8930, 0xc0005a72d8)
github.com/tendermint/tendermint/libs/os/os.go:26 +0x102
created by github.com/tendermint/tendermint/libs/os.TrapSignal
github.com/tendermint/tendermint/libs/os/os.go:22 +0xe6
goroutine 161 [select]:
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).poolRoutine(0xc0000d3a00, 0x0)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:464 +0x2b3
created by github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStart
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:174 +0xf1
goroutine 162 [select]:
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).processBlockSyncCh(0xc0000d3a00)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:310 +0x151
created by github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStart
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:177 +0x54
goroutine 163 [select]:
github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).processPeerUpdates(0xc0000d3a00)
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:363 +0x12b
created by github.com/tendermint/tendermint/internal/blocksync/v0.(*Reactor).OnStart
github.com/tendermint/tendermint/internal/blocksync/v0/reactor.go:178 +0x76
```
This test reliably gets hung up on network configuration, (which may
be a real issue,) but it's network setup is handcranked and we should
ensure that the test focuses on it's core assertions and doesn't fail for
test architecture reasons.
I've been noticing that there are a number of situations where the
statesync reactor blocks waiting for peers (or similar,) I've moved
things around to improve outcomes in local tests.
M. J. Fromberger
Callum Waters
Sam Kleinman
Sharad Chand
William Banfield
Marko
Jared Zhou
lklimek