The `NodeInfo` interface does not appear to serve any purpose at all, so I removed it and renamed the `DefaultNodeInfo` struct to `NodeInfo` (including the Protobuf representations). Let me know if this is actually needed for anything.
Only the Protobuf rename is listed in the changelog, since we do not officially support API stability of the `p2p` package (according to `README.md`). The on-wire protocol remains compatible.
This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog.
The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack.
The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely.
There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
Closes#5766
* memoize the scSchedulerFail error to avoid printing it every scheduleFreq
* blockchain/v2: modify switchIO funcs to accept peer instead of peerID
`Makefile` used `git branch --show-current` for branch detection. This option was introduced in Git 2.22. However, the current Debian release (Buster), which is used by the `golang:1.15` Docker image, uses Git 2.20. This gives spurious errors e.g. when running the E2E tests:
```
error: unknown option `show-current'
```
This PR changes the branch detection to be compatible with Git 2.20. The behavior appears to be the same as `git branch --show-current`, both when on a branch, on a tag, and on a detached HEAD.
closes: #5770closes: #5769
also, include node ID in the output (#5769) and modify NodeKey to use
value semantics (it makes perfect sense for NodeKey to not be a
pointer).
## Description
Bump version to get performance updates:
```
benchmark old ns/op new ns/op delta
BenchmarkVerification-8 174857 78376 -55.18%
```
Closes: #XXX
Bumps [vuepress-theme-cosmos](https://github.com/cosmos/vuepress-theme-cosmos) from 1.0.177 to 1.0.178.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a href="https://github.com/cosmos/vuepress-theme-cosmos/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Bumps [vuepress-theme-cosmos](https://github.com/cosmos/vuepress-theme-cosmos) from 1.0.176 to 1.0.177.
<details>
<summary>Commits</summary>
<ul>
<li>See full diff in <a href="https://github.com/cosmos/vuepress-theme-cosmos/commits">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/configuring-github-dependabot-security-updates)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
After a reactor has failed to parse an incoming message, it shouldn't output the "bad" data into the logs, as that data is unfiltered and could have anything in it. (We also don't think this information is helpful to have in the logs anyways.)
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Aleksandr Bezobchuk <alexanderbez@users.noreply.github.com>
Co-authored-by: Marko <marbar3778@yahoo.com>
Replace testing.T.Cleanup() with deferred function
calls in test helpers as those cleanup functions
need to be called once the helper returns and not
when the entire test ends.
This reverts a few of the changes introduced in #5723.
Thanks: @erikgrinaker for pointing this out.
Ref: #5732
*testing.T.TempDir() causes test cases to fail when
it is unable to remove the temporary directory once
the test case execution terminates. This seems to
happen often with pex reactor test cases.
I introduced a new variable - syncEnded, which is now used to prevent
sending new events to channels (which would block otherwise) if reactor
is finished syncing
Closes#4591
## Description
I'm just doing a self audit of the light client. There's a few things I've changed
- Validate trust level in `VerifyNonAdjacent` function
- Make errNoWitnesses public (it's something people running software on top of a light client should be able to parse)
- Remove `ChainID` check of witnesses on start up. We do this already when we compare the first header with witnesses
- Remove `ChainID()` from provider interface
Closes: #4538
`abci.Client`:
- Sync and Async methods now accept a context for cancellation
* grpc client uses context to cancel both Sync and Async requests
* local client ignores context parameter
* socket client uses context to cancel Sync requests and to drop Async requests before sending them if context was cancelled prior to that
- Async methods return an error
* socket client returns an error immediately if queue is full for Async requests
* local client always returns nil error
* grpc client returns an error if context was cancelled before we got response or the receiving queue had a space for response (do not confuse with the sending queue from the socket client)
- specify clients semantics in [doc.go](https://raw.githubusercontent.com/tendermint/tendermint/27112fffa62276bc016d56741f686f0f77931748/abci/client/doc.go)
`mempool.TxInfo`
- add optional `Context` to `TxInfo`, which can be used to cancel `CheckTx` request
Closes#5190
Replace defer with t.Cleanup().
Replace the combination of ioutil.TempDir, error checking
and defer os.RemoveAll() with Go testing.T's new TempDir()
helper.
Mark auxiliary functions as test helpers.
This fixes spurious `TestByzantinePrevoteEquivocation` failures by extending the block range and time spent waiting for evidence. I've seen many runs where the evidence isn't committed until e.g. height 27. Haven't looked into _why_ this happens, but as long as the evidence is committed eventually and the test doesn't spuriously fail I'm (mostly) happy. WDYT @cmwaters?
Anton Kaliaev
Callum Waters
PaddyMc
Erik Grinaker
dependabot[bot]
Tess Rinearson
Aleksandr Bezobchuk
Marko
Alessio Treglia