* Removal of TotalTx & NumTx
- Removed totalTx and numTx
closes#2521
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* abci proto changes
* proto number fix
* txfilter_test fix
* comments on PR
* further changes
* bring back metrics
* fix indexer
* fix TestBlockMaxDataBytes and TestBlockMaxDataBytesUnknownEvidence
* indexer service back to header
* statistics.go fix
* fix ci
* listen for blocks, not headers
to be able to record txs throughput
* fix TestNetworkNewBlock
* fix tests
* fix tests in types package
* fixes after Anton's review
* fix tests
* bring back `consensus_total_txs` metric
I mistakenly thought it was removed.
* improve changelog
* remove LastBlockTotalTx from state
* docs: remove getNumTxs from BeginBlock Java example
## Issue:
This is an approach to fixing secret connection that is more noise-ish than actually noise.
but it essentially fixes the problem that #3315 is trying to solve by making the secret connection handshake non-malleable. It's easy to understand and I think will be acceptable to @jaekwon
.. the formal reasoning is basically, if the "view" of the transcript between diverges between the sender and the receiver at any point in the protocol, the handshake would terminate.
The base protocol of Station to Station mistakenly assumes that if the sender and receiver arrive at shared secret they have the same view. This is only true for a DH on prime order groups.
This robustly solves the problem by having each cryptographic operation commit to operators view of the protocol.
Another nice thing about a transcript is it provides the basis for "secure" (barring cryptographic breakages, horrible design flaws, or implementation bugs) downgrades, where a backwards compatible handshake can be used to offer newer protocol features/extensions, peers agree to the common subset of what they support, and both sides have to agree on what the other offered for the transcript MAC to verify.
With something like Protos/Amino you already get "extensions" for free (TLS uses a simple TLV format https://tools.ietf.org/html/rfc8446#section-4.2 for extensions not too far off from Protos/Amino), so as long as you cryptographically commit to what they contain in the transcript, it should be possible to extend the protocol in a backwards-compatible manner.
## Commits:
* Minimal changes to remove malleability of secret connection removes the need to check for lower order points.
Breaks compatibility. Secret connections that have no been updated will fail
* Remove the redundant blacklist
* remove remainders of blacklist in tests to make the code compile again
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Apply suggestions from code review
Apply Ismail's error handling
Co-Authored-By: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* fix error check for io.ReadFull
Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Update p2p/conn/secret_connection.go
Co-Authored-By: Ismail Khoffi <Ismail.Khoffi@gmail.com>
* Update p2p/conn/secret_connection.go
Co-Authored-By: Bot from GolangCI <42910462+golangcibot@users.noreply.github.com>
* update changelog and format the code
* move hkdfInit closer to where it's used
BREAKING
Example response:
```json
{
"jsonrpc": "2.0",
"id": "",
"result": {
"height": "2109",
"txs_results": null,
"begin_block_events": null,
"end_block_events": null,
"validator_updates": null,
"consensus_param_updates": null
}
}
```
Old result consisted of ABCIResponses struct and height. Exposing
internal ABCI structures (which we store in state package) in RPC seems
bad to me for the following reasons:
1) high risk of breaking the API when somebody changes internal structs
(HAPPENED HERE!)
2) RPC is aware of ABCI, which I'm not sure we want
Fixes#4051
Function `parseRemoteAddr` is forcing protocol HTTP and protocol HTTPs to tcp. This causes the bug in the issue #4051.
I find that the tcp is only needed where `net.Dial`. So I moved the switch to makeHTTPDialer.
## Issue:
Hey, not sure if this is disallowed for any reason specifically, but it would be very beneficial to define additional types to decode tendermint key implementations from bytes, since it uses a static codec. If this is okay, let me know and I will add documentation.
Context: For Ethermint to switch to using Cosmos' keybase, decoding the keys requires this codec to be updated
Just to document, I did experiment with creating a mapping from string to objects to be able to keep track of the key types added to be able to be used in the RegisterAmino(..) call, but because of how go is compiled, cosmos would just use the base types. This may be a useful feature for someone just building on top of Tendermint and not going through Cosmos, but to not add confusion or unnecessary complexity, I left it out.
## Commits:
* Exposes amino codec to be able to decode pk bytes in application
* Change how codec is modified
* Remove unneeded comment
* Fix comment
* Fix comment
* Add registered type to nametable
* Add pending changelog entry
* Reorder change
* Added check if type is registered and added test
* Make test type private
* Remove unnecessary duplicate exists check
Added a small function to be able to change the default retry interval for the privval. The default is 100ms, this function allows to change to any time.Duration.
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
## Issue:
This PR adds an "EXISTS" condition to the event query grammar. It enables querying for the occurrence of an event without having to provide a condition for one of its attributes.
As an example, someone interested in all slashing events might currently catch them with a query such as slash.power > 0.
With this PR the event can be captured with slash.power EXISTS or just slash EXISTS to catch by event type.
## Examples:
`slash EXISTS`
## Commits:
* Add EXISTS condition to query grammar
* Gofmt files
* Move PEG instructions out of auto-generated file to prevent overwrite
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update changelog and add test case
* Merge with other changes in PR #4070
* Add EXISTS to Conditions() func
* Apply gofmt
* Addressing PR comments
when the user searches for a tx (hash=X)
This PR fixes error handling for performing a txindex search.
TxIndex.Get returns
(txresult, nil) if the transaction is found.
(nil, nil) if the transaction is not found.
(nil, error) if error is occurred.
Therefore, if res is not nil, I think TxIndex.Search should return (txresult, nil).
Previously, however, this was not a problem because errors.Wrap returns nil if its first argument err is nil.
## Issue
Why this pr:
When restarting chain node, sometimes we lost tx index about recent(around 80)blocks, and some client complains that they can't find the tx by RPC call(tx_search) when the tx do exist in the block.
I try to partially fix this issue in a simple way by writing the index data in a sync way.
There is no performance difference under 1K TPS according to our test.
It is still possible that lost index data after restarting the node, but only 2 block data will lost at most.
I try to totally fix this in https://github.com/tendermint/tendermint/pull/3847/files, but this one is simple and can solve most part of the issue. Please review first, thks.
## Comments
Anton:
BEFORE:
BenchmarkTxIndex1-2 100000 12434 ns/op
BenchmarkTxIndex500-2 300 5151564 ns/op
BenchmarkTxIndex1000-2 100 15053910 ns/op
BenchmarkTxIndex2000-2 100 18238892 ns/op
BenchmarkTxIndex10000-2 20 124287930 ns/op
AFTER:
BenchmarkTxIndex1-2 2000 795431 ns/op
BenchmarkTxIndex500-2 200 6385124 ns/op
BenchmarkTxIndex1000-2 100 11388219 ns/op
BenchmarkTxIndex2000-2 100 20514873 ns/op
BenchmarkTxIndex10000-2 20 107456004 ns/op
Performance drop is pretty steep, but I think it's the right thing to do UNTIL we have a WAL.
* cs: panic only when WAL#WriteSync fails
- modify WAL#Write and WAL#WriteSync to return an error
* fix test
* types: validate Part#Proof
add ValidateBasic to crypto/merkle/SimpleProof
* cs: limit max bit array size and block parts count
* cs: test new limits
* cs: only assert important stuff
* update changelog and bump version to 0.32.7
* fixes after Ethan's review
* align max wal msg and max consensus msg sizes
* fix tests
* fix test
* add change log for 31.11
Some linting/cleanup missed from the initial events refactor
Don't panic; instead, return false, error when matching breaks unexpectedly
Strip non-numeric chars from values when attempting to match against query values
Have the server log during send upon error
* cleanup/lint Query#Conditions and do not panic
* cleanup/lint Query#Matches and do not panic
* cleanup/lint matchValue and do not panic
* rever to panic in Query#Conditions
* linting
* strip alpha chars when attempting to match
* add pending log entries
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* build: update variable names
* update matchValue to return an error
* update Query#Matches to return an error
* update TestMatches
* log error in send
* Fix tests
* Fix TestEmptyQueryMatchesAnything
* fix linting
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update libs/pubsub/query/query.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update libs/pubsub/pubsub.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* add missing errors pkg import
* update Query#Conditions to return an error
* update query pkg unit tests
* update TxIndex#Search
* update pending changelog
* Include sender when logging rejected txns
* Log as peerID to be consistent with other log messages
* Updated CHANGELOG_PENDING
* Handle nil source
* Updated PR link in CHANGELOG_PENDING
* Renamed TxInfo.SenderAddress and peerAddress til PeerFullID
* Renamed PeerFullID to PeerP2PID
* Forgot to rename a couple of references
* tm-monitor: tweaked formatting of start time and avg tx throughput.
* tm-monitor: update health when validator number is updated.
* Updated CHANGELOG_PENDING
* Added PR number to CHANGELOG_PENDING.
Improves `tm-monitor` formatting of start time (RFC1123 without unnecessary precision) and avg tx throughput (three decimal places). The old tx throughput display was confusing during local testing where the tx rate is low and displayed as 0.
Also updates the monitor health whenever the validator number changes. It otherwise starts with moderate health and fails to update this once it discovers the validators, leading to incorrect health reporting and invalid uptime statistics. Let me know if you would like me to submit this as a separate PR.
### Before:
```
2019-09-29 20:40:00.992834 +0200 CEST m=+0.024057059 up -92030989600.42%
Height: 2518
Avg block time: 1275.496 ms
Avg tx throughput: 0 per sec
Avg block latency: 2.464 ms
Active nodes: 4/4 (health: moderate) Validators: 4
NAME HEIGHT BLOCK LATENCY ONLINE VALIDATOR
localhost:26657 2518 0.935 ms true true
localhost:26660 2518 0.710 ms true true
localhost:26662 2518 0.708 ms true true
localhost:26664 2518 0.717 ms true true
```
### After:
```
Sun, 29 Sep 2019 20:21:59 +0200 up 100.00%
Height: 2480
Avg block time: 1361.445 ms
Avg tx throughput: 0.735 per sec
Avg block latency: 4.232 ms
Active nodes: 4/4 (health: full) Validators: 4
NAME HEIGHT BLOCK LATENCY ONLINE VALIDATOR
localhost:26657 2480 1.174 ms true true
localhost:26660 2480 1.037 ms true true
localhost:26662 2480 0.981 ms true true
localhost:26664 2480 0.995 ms true true
```
* Remove omitempty from *pb.go
- remove omitempty from *pb.go files
- added command to makefile for everytime `make protoc_all` is run
- open question:
- Do we want to further remove omitempty from other places
- https://github.com/tendermint/tendermint/blob/master/rpc/lib/types/types.go#L151
- and other places
ref #3882
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* bring back omitempty to *pb.go
* Update types/tx.go
* custom marshlers
* undo benchmark `omitepmty`
* golangci lint fix
* cleanup comments
* changelog_pending entry
* Correct memory alignment for 32-bit machine.
Switching the `txsBytes` and `rechecking` fields of `CListMempool` to ensure the correct memory alignment for `atomic.LoadInt64` on 32-bit machine.
* Update CHANGELOG_PENDING.md for #3968Fixed#3968 `mempool` Memory Loading Error on 32-bit Ubuntu 16.04 Machine.
* Update CHANGELOG_PENDING.md
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* cs: check for SkipTimeoutCommit or wait timeout in handleTxsAvailable
Previously, if create_empty_blocks was set to false, TM sometimes could
create 2 consecutive blocks without actually waiting for timeoutCommit
(1 sec. by default).
```
I[2019-08-29|07:32:43.874] Executed block module=state height=47 validTxs=10 invalidTxs=0
I[2019-08-29|07:32:43.876] Committed state module=state height=47 txs=10 appHash=F88C010000000000
I[2019-08-29|07:32:44.885] Executed block module=state height=48 validTxs=2 invalidTxs=0
I[2019-08-29|07:32:44.887] Committed state module=state height=48 txs=2 appHash=FC8C010000000000
I[2019-08-29|07:32:44.908] Executed block module=state height=49 validTxs=8 invalidTxs=0
I[2019-08-29|07:32:44.909] Committed state module=state height=49 txs=8 appHash=8C8D010000000000
I[2019-08-29|07:32:45.886] Executed block module=state height=50 validTxs=2 invalidTxs=0
I[2019-08-29|07:32:45.895] Committed state module=state height=50 txs=2 appHash=908D010000000000
I[2019-08-29|07:32:45.908] Executed block module=state height=51 validTxs=8 invalidTxs=0
I[2019-08-29|07:32:45.909] Committed state module=state height=51 txs=8 appHash=A08D010000000000
```
This commit fixes that by adding a check to handleTxsAvailable.
Fixes#3908
* update changelog
* schedule timeoutCommit if StartTime is in the future
or SkipTimeoutCommit=true && we DON'T have all the votes
* fix TestReactorCreatesBlockWhenEmptyBlocksFalse
by checking if we have LastCommit or not
* address Ethan's comments
When using the RPC client in my test suite (with -race enabled), I do a lot of Subscribe/Unsubscribe operations, at some point (randomly) the race detector returns the following warning:
WARNING: DATA RACE
Read at 0x00c0009dbe30 by goroutine 31:
runtime.mapiterinit()
/usr/local/go/src/runtime/map.go:804 +0x0
github.com/tendermint/tendermint/rpc/client.(*WSEvents).redoSubscriptionsAfter()
/go/pkg/mod/github.com/tendermint/tendermint@v0.31.5/rpc/client/httpclient.go:364 +0xc0
github.com/tendermint/tendermint/rpc/client.(*WSEvents).eventListener()
/go/pkg/mod/github.com/tendermint/tendermint@v0.31.5/rpc/client/httpclient.go:393 +0x3c6
Turns out that the redoSubscriptionAfter is not protecting the access to subscriptions.
The following change protects the read access to the subscription map behind the mutex
* manually swagging
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* three definitions with polymorphism
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* added blockchain and block
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* low quality generation, commit, block_response and validators
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* genesis and consensus states endpoints
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* fix indentation
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* consensus parameters
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* fix indentation
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add height to consensus parameters endpoint
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* unconfirmed_txs and num_unconfirmed_txs
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add missing query parameter
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add ABCI queries
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* added index document for swagger documentation
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add missing routes
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* contract tests added on CCI
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* contract tests job should be in the test suite
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* simplify requirements to test
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* typo
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* build is a prerequisite to start localnet
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* reduce nodejs size, move goodman to get_tools, add docs, fix comments
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* Update scripts/get_tools.sh
That's cleaner, thanks!
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* xz not supported by cci image, let's keep it simple
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* REMOVE-indirect debug of CCI paths
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* dirty experiment, volume is empty but binary has been produced
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* dirty experiment, volume is empty but binary has been produced
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* dirty experiment going on
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* locally works, CCI have difficulties with second layaer containers volumes
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* restore experiment, use machine instead of docker for contract tests
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* simplify a bit
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* rollback on machine golang
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* Document the changes
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* Changelog
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* comments
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
This PR is related to #3107 and a continuation of #3351
It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction.
Given two hosts A and B:
Host A is listener/client
Host B is dialer/server (contains the secret key)
When A requires a signature, it needs to wait for B to dial in before it can issue a request.
A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect.
The original rationale behind this design was based on security.
Host B only allows outbound connections to a list of whitelisted hosts.
It is not possible to reach B unless B dials in. There are no listening/open ports in B.
This PR results in the following changes:
Refactors ping/heartbeat to avoid previously existing race conditions.
Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow.
Unifies and abstracts away the differences between unix and tcp sockets.
A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj)
The signer request handler (server side) is customizable to increase testability.
Updates and extends unit tests
A high level overview of the classes is as follows:
Transport (endpoints): The following classes take care of establishing a connection
SignerDialerEndpoint
SignerListeningEndpoint
SignerEndpoint groups common functionality (read/write/timeouts/etc.)
Signing (client/server): The following classes take care of exchanging request/responses
SignerClient
SignerServer
This PR also closes#3601
Commits:
* refactoring - work in progress
* reworking unit tests
* Encapsulating and fixing unit tests
* Improve tests
* Clean up
* Fix/improve unit tests
* clean up tests
* Improving service endpoint
* fixing unit test
* fix linter issues
* avoid invalid cache values (improve later?)
* complete implementation
* wip
* improved connection loop
* Improve reconnections + fixing unit tests
* addressing comments
* small formatting changes
* clean up
* Update node/node.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* check during initialization
* dropping connecting when writing fails
* removing break
* use t.log instead
* unifying and using cmn.GetFreePort()
* review fixes
* reordering and unifying drop connection
* closing instead of signalling
* refactored service loop
* removed superfluous brackets
* GetPubKey can return errors
* Revert "GetPubKey can return errors"
This reverts commit 68c06f19b4.
* adding entry to changelog
* Update CHANGELOG_PENDING.md
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* updating node.go
* review fixes
* fixes linter
* fixing unit test
* small fixes in comments
* addressing review comments
* addressing review comments 2
* reverting suggestion
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* do not expose brokenSignerDialerEndpoint
* clean up logging
* unifying methods
shorten test time
signer also drops
* reenabling pings
* improving testability + unit test
* fixing go fmt + unit test
* remove unused code
* Addressing review comments
* simplifying connection workflow
* fix linter/go import issue
* using base service quit
* updating comment
* Simplifying design + adjusting names
* fixing linter issues
* refactoring test harness + fixes
* Addressing review comments
* cleaning up
* adding additional error check
* node: allow replacing existing p2p.Reactor(s)
using [`CustomReactors`
option](https://godoc.org/github.com/tendermint/tendermint/node#CustomReactors).
Warning: beware of accidental name clashes. Here is the list of existing
reactors: MEMPOOL, BLOCKCHAIN, CONSENSUS, EVIDENCE, PEX.
* check the absence of "CUSTOM" prefix
* merge 2 tests
* add doc.go to node package
* Do not write 'Couldn't connect to any seeds' if there are no seeds
* changelog
* remove privValUpgrade
* Fix typo in changelog
* Update CHANGELOG_PENDING.md
Co-Authored-By: Marko <marbar3778@yahoo.com>
I'm setting up all peers dynamically by calling dial_peers, so p2p.seeds in configs is empty, and I'm seeing error log a lot in logs.
* p2p: fix false-positive error logging when stopping connections
This changeset fixes two types of false-positive errors occurring during
connection shutdown.
The first occurs when the process invokes FlushStop() or Stop() on a
connection. While the previous behavior did properly wait for the sendRoutine
to finish, it did not notify the recvRoutine that the connection was shutting
down. This would cause the recvRouting to receive and error when reading and
log this error. The changeset fixes this by notifying the recvRoutine that
the connection is shutting down.
The second occurs when the connection is terminated (gracefully) by the other side.
The recvRoutine would get an EOF error during the read, log it, and stop the connection
with an error. The changeset detects EOF and gracefully shuts down the connection.
* bring back the comment about flushing
* add changelog entry
* listen for quitRecvRoutine too
* we have to call stopForError
Otherwise peer won't be removed from the peer set and maybe readded
later.
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Remove db from tendemrint in favor of tendermint/tm-cmn
- remove db from `libs`
- update dependancy, there have been no breaking changes in the updated deps
- https://github.com/grpc/grpc-go/releases
- https://github.com/golang/protobuf/releases
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* changelog add
* gofmt
* more gofmt
* Release branch for v0.32.1
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* add links to changelog
* wording change
* Apply suggestions from code review
Comment from PR
Co-Authored-By: Ethan Buchman <ethan@coinculture.info>
* add link bump abci Version
* include doc change for abci/app
* moved abci change to features as it doesnt break the abci
* pr comments (#3803)
* pr comments
* abci changelog change
* Marko/update release1 (#3806)
* pr comments
* remove empty space
* more minor cleanup of libs
Remove unused `version.go`, `assert.go` and `libs/circle.yml`
* Update types/vote_set_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* spelling change
Marko
Zaki Manian
Anton Kaliaev
yk
Austin Abell
cosmostuba
Henrik Aasted Sørensen
seungyeon-hwang
Erik Grinaker
zjubfd
Alexander Bezobchuk
Hongmin
Erik Grinaker
Jon
gracenoah
Gustavo Chaín
Karoly Albert Szabo
Jun Kimura
Juan Leni
folex
Anca Zamfir
Roman Useinov