* Make sure config.TimeoutBroadcastTxCommit < rpcserver.WriteTimeout()
* remove redundant comment
* libs/rpc/http_server: move Read/WriteTimeout into Config
* increase defaults for read/write timeouts
Based on this article
https://www.digitalocean.com/community/tutorials/how-to-optimize-nginx-configuration
* WriteTimeout should be larger than TimeoutBroadcastTxCommit
* set a deadline for subscribing to txs
* extract duration into const
* add two changelog entries
* Update CHANGELOG_PENDING.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* Update CHANGELOG_PENDING.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* 12 -> 10
* changelog
* changelog
* limit number of /subscribe clients and queries per client
Add the following config variables (under [rpc] section):
* max_subscription_clients
* max_subscriptions_per_client
* timeout_broadcast_tx_commit
Fixes#2826
new HTTPClient interface for subscriptions
finalize HTTPClient events interface
remove EventSubscriber
fix data race
```
WARNING: DATA RACE
Read at 0x00c000a36060 by goroutine 129:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0
Previous write at 0x00c000a36060 by goroutine 132:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 129 (running) created at:
github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe()
/go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7
github.com/tendermint/tendermint/rpc/client.WaitForOneEvent()
/go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
Goroutine 132 (running) created at:
testing.(*T).Run()
/usr/local/go/src/testing/testing.go:878 +0x659
github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync()
/go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186
testing.tRunner()
/usr/local/go/src/testing/testing.go:827 +0x162
==================
```
lite client works (tested manually)
godoc comments
httpclient: do not close the out channel
use TimeoutBroadcastTxCommit
no timeout for unsubscribe
but 1s Local (5s HTTP) timeout for resubscribe
format code
change Subscribe#out cap to 1
and replace config vars with RPCConfig
TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout
rpc: Context as first parameter to all functions
reformat code
fixes after my own review
fixes after Ethan's review
add test stubs
fix config.toml
* fixes after manual testing
- rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes
Tendermint resources (pubsub)
- rpc: better error in Subscribe and BroadcastTxCommit
- HTTPClient: do not resubscribe if err = ErrAlreadySubscribed
* fixes after Ismail's review
* Update rpc/grpc/grpc_test.go
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* docs: explain create_empty_blocks configurations
Closes#3307
* Vagrantfile: install nodejs for docs
* update docs instructions
npm install does not make sense since there's no packages.json file
* explain broadcast_tx_* tx format
Closes#536
* docs: explain how transaction ordering works
Closes#2904
* bring in consensus parameters explained
* example for create_empty_blocks_interval
* bring in explanation from https://github.com/tendermint/tendermint/issues/2487#issuecomment-424899799
* link to formatting instead of duplicating info
* bound mempool memory usage
Closes#3079
* rename SizeBytes to TxsTotalBytes
and other small fixes after Zarko's review
* rename MaxBytes to MaxTxsTotalBytes
* make ErrMempoolIsFull more informative
* expose mempool's txs_total_bytes via RPC
* test full response
* fixes after Ethan's review
* config: rename mempool.size to mempool.max_txs
https://github.com/tendermint/tendermint/pull/3248#discussion_r254034004
* test more cases
https://github.com/tendermint/tendermint/pull/3248#discussion_r254036532
* simplify test
* Revert "config: rename mempool.size to mempool.max_txs"
This reverts commit 39bfa36961.
* rename count back to n_txs
to make a change non-breaking
* rename max_txs_total_bytes to max_txs_bytes
* format code
* fix TestWALPeriodicSync
The test was sometimes failing due to processFlushTicks being called too
early. The solution is to call wal#Start later in the test.
* Apply suggestions from code review
* config: cors options are arrays of strings, not strings
Fixes#2980
* docs: update tendermint-core/configuration.html page
* set allow_duplicate_ip to false
* in `tendermint testnet`, set allow_duplicate_ip to true
Refs #2712
* fixes after Ismail's review
* config: cors options are arrays of strings, not strings
Fixes#2980
* docs: update tendermint-core/configuration.html page
* set allow_duplicate_ip to false
* in `tendermint testnet`, set allow_duplicate_ip to true
Refs #2712
* fixes after Ismail's review
* Revert "set allow_duplicate_ip to false"
This reverts commit 24c1094ebc.
* update docs
- make install_c cmd (install)
- explain node IDs (quick-start)
- update UPGRADING section (using-tendermint)
* use git clone with JS example
JS devs may not have Go installed and we should not force them to.
* rewrite sentence
* add missing options to config.toml template and docs
Refs #2232
* config#ValidateBasic
Refs #2232
* [config] timeouts as time.Duration, not ints
Why:
- native type provides better guarantees than ", in ms" comment (harder
to shoot yourself in the leg)
- flexibility: you can change units
* docs: link consensus to blockchain spec. closes#2422
* docs: deprecate research section. closes#2401
* docs: fix some links
* docs: fix some markdown lists
* docs: fix more links
Closes#2421.
I am of the opinion that the spec is easier to read than this though,
and we shouldn't really explain this here other than that we use a variant
of station to station protocol, with X25519 for the diffie hellman, and we
describe the related security properties.
Why:
original fork is abandoned and not supported anymore.
Changes:
- LevelDB 1.19 (LevelDB and Snappy are both compiled and linked statically, so while you will not need them installed on your target machine, you should have a roughly compatible version of libstdc++.)
- snappy and lz4 libs included by default
* addr_book_strick=false on local nets
* link to spec
* spec: remove TODO, see #1749 instead
* spec: make issues from TODOs
* update docs on addr_book_strict option
* [p2p/pex] connect to more than 10 peers
also, remove DefaultMinNumOutboundPeers because a) I am not sure it's
needed b) it's super confusing
look closely
```
maxPeers := sw.config.MaxNumPeers - DefaultMinNumOutboundPeers
if maxPeers <= sw.peers.Size() {
sw.Logger.Info("Ignoring inbound connection: already have enough peers", "address", inConn.RemoteAddr().String(), "numPeers", sw.peers.Size(), "max", maxPeers)
```
we print maxPeers = config.MaxPeers - DefaultMinNumOutboundPeers. So we
may not have enough peers even though we say we have enough.
Refs #2130
* update spec
* replace MaxNumPeers with MaxNumInboundPeers/MaxNumOutboundPeers
Refs #2130
* update changelog
* make max rpc conns formula visible to users
* update spec
* docs: note max outbound peers excludes persistent
Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.
Ref discussion: https://github.com/tendermint/tendermint/pull/1966Closes#1956
* limit the number of requests in flights for Prometheus server
Closes#1804
Default to 1 because usually there's just one collector.
* config: Up default for prom connections
zjubfd
Ismail Khoffi
Anton Kaliaev
Sven-Hendrik Haase
Thane Thomson
Zach
Hleb Albau
Ethan Buchman
cong
zramsay
Matthew Slipper
ValarDragon
xiaoping
Alessio Treglia
Peng Zhong
Dev Ojha
bradyjoestar
Jeremiah Andrews