* libs/common: refactor libs/common 2

- move random function to there own pkg

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* change imports and usage throughout repo

* fix goimports

* add changelog entry

Refs #3262

Added a small function to be able to change the default retry interval for the privval. The default is 100ms, this function allows to change to any time.Duration.

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

Co-Authored-By: Bot from GolangCI <42910462+golangcibot@users.noreply.github.com>

There's no debug statement in Read func, so should be OK remove this one too.

* Fix long line errors in abci, crypto, and libs packages

* Fix long lines in p2p and rpc packages

* Fix long lines in abci, state, and tools packages

* Fix long lines in behaviour and blockchain packages

* Fix long lines in cmd and config packages

* Begin fixing long lines in consensus package

* Finish fixing long lines in consensus package

* Add lll exclusion for lines containing URLs

* Fix long lines in crypto package

* Fix long lines in evidence package

* Fix long lines in mempool and node packages

* Fix long lines in libs package

* Fix long lines in lite package

* Fix new long line in node package

* Fix long lines in p2p package

* Ignore gocritic warning

* Fix long lines in privval package

* Fix long lines in rpc package

* Fix long lines in scripts package

* Fix long lines in state package

* Fix long lines in tools package

* Fix long lines in types package

* Enable lll linter

* Fix maligned structs

* Fix interfacer errors

* Revert accidental go.mod and go.sum changes

* Revert P2PConfig struct maligned reorder

* Revert PeerRoundState struct maligned reordering

* Revert RoundState struct maligned reordering

* Reorder WSClient struct

* Revert accidental type change

* Clean up type change

* Clean up type changes

* Revert to types.ABCIApplicationServer in GRPCServer struct

* Revert maligned changes to BaseConfig struct

* Fix tests in io_test.go

* Fix client_test package tests

* Fix reactor tests in consensus package

* Fix new interfacer errors

* init of (2/2) common errors

* Remove instances of cmn.Error (2/2)

- Replace usage of cmnError and errorWrap
- ref #3862

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* comment wording

* simplify IsErrXXX functions

* log panic along with stopping the MConnection

* (1/2) of replace errors.go with github.com/pkg/errors

ref #3862

- step one in removing instances of errors.go in favor of github.com/pkg/errors

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* gofmt

* add in /store

This PR is related to #3107 and a continuation of #3351

It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction.

Given two hosts A and B:

    Host A is listener/client
    Host B is dialer/server (contains the secret key)
    When A requires a signature, it needs to wait for B to dial in before it can issue a request.
    A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect.

The original rationale behind this design was based on security.

    Host B only allows outbound connections to a list of whitelisted hosts.
    It is not possible to reach B unless B dials in. There are no listening/open ports in B.

This PR results in the following changes:

    Refactors ping/heartbeat to avoid previously existing race conditions.
    Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow.
    Unifies and abstracts away the differences between unix and tcp sockets.
    A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj)
    The signer request handler (server side) is customizable to increase testability.
    Updates and extends unit tests

A high level overview of the classes is as follows:

Transport (endpoints): The following classes take care of establishing a connection

    SignerDialerEndpoint
    SignerListeningEndpoint
    SignerEndpoint groups common functionality (read/write/timeouts/etc.)

Signing (client/server): The following classes take care of exchanging request/responses

    SignerClient
    SignerServer

This PR also closes #3601

Commits:

* refactoring - work in progress

* reworking unit tests

* Encapsulating and fixing unit tests

* Improve tests

* Clean up

* Fix/improve unit tests

* clean up tests

* Improving service endpoint

* fixing unit test

* fix linter issues

* avoid invalid cache values (improve later?)

* complete implementation

* wip

* improved connection loop

* Improve reconnections + fixing unit tests

* addressing comments

* small formatting changes

* clean up

* Update node/node.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_client.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_client_test.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* check during initialization

* dropping connecting when writing fails

* removing break

* use t.log instead

* unifying and using cmn.GetFreePort()

* review fixes

* reordering and unifying drop connection

* closing instead of signalling

* refactored service loop

* removed superfluous brackets

* GetPubKey can return errors

* Revert "GetPubKey can return errors"

This reverts commit 68c06f19b4.

* adding entry to changelog

* Update CHANGELOG_PENDING.md

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_client.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_dialer_endpoint.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_dialer_endpoint.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_dialer_endpoint.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_dialer_endpoint.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* Update privval/signer_listener_endpoint_test.go

Co-Authored-By: jleni <juan.leni@zondax.ch>

* updating node.go

* review fixes

* fixes linter

* fixing unit test

* small fixes in comments

* addressing review comments

* addressing review comments 2

* reverting suggestion

* Update privval/signer_client_test.go

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* Update privval/signer_client_test.go

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* Update privval/signer_listener_endpoint_test.go

Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>

* do not expose brokenSignerDialerEndpoint

* clean up logging

* unifying methods

shorten test time
signer also drops

* reenabling pings

* improving testability + unit test

* fixing go fmt + unit test

* remove unused code

* Addressing review comments

* simplifying connection workflow

* fix linter/go import issue

* using base service quit

* updating comment

* Simplifying design + adjusting names

* fixing linter issues

* refactoring test harness + fixes

* Addressing review comments

* cleaning up

* adding additional error check

cleanup to add linter

    grpc change:
        https://godoc.org/google.golang.org/grpc#WithContextDialer
        https://godoc.org/google.golang.org/grpc#WithDialer
        grpc/grpc-go#2627
    prometheous change:
        due to UninstrumentedHandler, being deprecated in the future
    empty branch = empty if or else statement
        didn't delete them entirely but commented
        couldn't find a reason to have them
    could not replicate the issue #3406
        but if want to keep it commented then we should comment out the if statement as well

* Renamed wire.go to codec.go

- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* ide error

* rename amino.go to codec.go

- Govet issues fixed
- 1 gosec issue solved using nolint

Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>

* p2p: merge switch cases

also improve the error msg in privval

* pex: refactor code plus update specification

follow-up to https://github.com/tendermint/tendermint/pull/3603

* Update docs/spec/reactors/pex/pex.md

Co-Authored-By: melekes <anton.kalyaev@gmail.com>

This should fix #3576 (ran it many times locally but only time will tell). The test actually only checked for the opcode of the error. From the name of the test we actually want to test if we see a timeout after a pre-defined time.

## Commits:

* increase readWrite timeout as it is also used in the `Accept` of the tcp
listener:

 - before this caused the readWriteTimeout to kick in (rarely) while Accept
 - as a side-effect: remove obsolete time.Sleep: in both listener cases
 the Accept will only return after successfully accepting and the timeout
 that is supposed to be tested here will be triggered because there is a
 read without a write
 - see if we actually run into a timeout error (the whole purpose of
 this test AFAIU)

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

* makee local test-vars `const`

Signed-off-by: Ismail Khoffi <Ismail.Khoffi@gmail.com>

## Additional comments:

@xla: Confusing how an accept could take longer than that, but assuming a noisy environment full of little docker whales will be slower than what 50 years of silicon are capable of. The only thing I'd be vary of is that we mask structural issues with the code by just bumping the timeout, if we are sensitive towards that it warrants invesigation, but again this might only be true in the environment our CI runs in.

This issue is related to #3107
This is a first renaming/refactoring step before reworking and removing heartbeats.
As discussed with @Liamsi , we preferred to go for a couple of independent and separate PRs to simplify review work.

The changes:

    Help to clarify the relation between the validator and remote signer endpoints
    Differentiate between timeouts and deadlines
    Prepare to encapsulate networking related code behind RemoteSigner in the next PR

My intention is to separate and encapsulate the "network related" code from the actual signer.

SignerRemote ---(uses/contains)--> SignerValidatorEndpoint <--(connects to)--> SignerServiceEndpoint ---> SignerService (future.. not here yet but would like to decouple too)

All reconnection/heartbeat/whatever code goes in the endpoints. Signer[Remote/Service] do not need to know about that.

I agree Endpoint may not be the perfect name. I tried to find something "Go-ish" enough. It is a common name in go-kit, kubernetes, etc.

Right now:
SignerValidatorEndpoint:

    handles the listener
    contains SignerRemote
    Implements the PrivValidator interface
    connects and sets a connection object in a contained SignerRemote
    delegates PrivValidator some calls to SignerRemote which in turn uses the conn object that was set externally

SignerRemote:

    Implements the PrivValidator interface
    read/writes from a connection object directly
    handles heartbeats

SignerServiceEndpoint:

    Does most things in a single place
    delegates to a PrivValidator IIRC.

* cleanup

* Refactoring step 1

* Refactoring step 2

* move messages to another file

* mark for future work / next steps

* mark deprecated classes in docs

* Fix linter problems

* additional linter fixes

* make govet linter pass

Refs #3262

* close PipeReader and check for err

* node: decrease retry conn timeout in test

Should fix #3256

The retry timeout was set to the default, which is the same as the
accept timeout, so it's no wonder this would fail. Here we decrease the
retry timeout so we can try many times before the accept timeout.

* p2p: increase handshake timeout in test

This fails sometimes, presumably because the handshake timeout is so low
(only 50ms). So increase it to 1s. Should fix #3187

* privval: fix race with ping. closes #3237

Pings happen in a go-routine and can happen concurrently with other
messages. Since we use a request/response protocol, we expect to send a
request and get back the corresponding response. But with pings
happening concurrently, this assumption could be violated. We were using
a mutex, but only a RWMutex, where the RLock was being held for sending
messages - this was to allow the underlying connection to be replaced if
it fails. Turns out we actually need to use a full lock (not just a read
lock) to prevent multiple requests from happening concurrently.

* node: fix test name. DelayedStop -> DelayedStart

* autofile: Wait() method

In the TestWALTruncate in consensus/wal_test.go we remove the WAL
directory at the end of the test. However the wal.Stop() does not
properly wait for the autofile group to finish shutting down. Hence it
was possible that the group's go-routine is still running when the
cleanup happens, which causes a panic since the directory disappeared.
Here we add a Wait() method to properly wait until the go-routine exits
so we can safely clean up. This fixes #2852.

* privval: more info in errors

* wal: change Debug logs to Info

* wal: log and return error on corrupted wal instead of panicing

* fail: Exit right away instead of sending interupt

* consensus: FAIL before handling our own vote

allows to replicate #3089:
- run using `FAIL_TEST_INDEX=0`
- delete some bytes from the end of the WAL
- start normally

Results in logs like:

```
I[2019-02-03|18:12:58.225] Searching for height module=consensus wal=/Users/ethanbuchman/.tendermint/data/cs.wal/wal height=1 min=0 max=0
E[2019-02-03|18:12:58.225] Error on catchup replay. Proceeding to start ConsensusState anyway module=consensus err="failed to read data: EOF"
I[2019-02-03|18:12:58.225] Started node module=main nodeInfo="{ProtocolVersion:{P2P:6 Block:9 App:1} ID_:35e87e93f2e31f305b65a5517fd2102331b56002 ListenAddr:tcp://0.0.0.0:26656 Network:test-chain-J8JvJH Version:0.29.1 Channels:4020212223303800 Moniker:Ethans-MacBook-Pro.local Other:{TxIndex:on RPCAddress:tcp://0.0.0.0:26657}}"
E[2019-02-03|18:12:58.226] Couldn't connect to any seeds module=p2p
I[2019-02-03|18:12:59.229] Timed out module=consensus dur=998.568ms height=1 round=0 step=RoundStepNewHeight
I[2019-02-03|18:12:59.230] enterNewRound(1/0). Current: 1/0/RoundStepNewHeight module=consensus height=1 round=0
I[2019-02-03|18:12:59.230] enterPropose(1/0). Current: 1/0/RoundStepNewRound module=consensus height=1 round=0
I[2019-02-03|18:12:59.230] enterPropose: Our turn to propose module=consensus height=1 round=0 proposer=AD278B7767B05D7FBEB76207024C650988FA77D5 privValidator="PrivValidator{AD278B7767B05D7FBEB76207024C650988FA77D5 LH:1, LR:0, LS:2}"
E[2019-02-03|18:12:59.230] enterPropose: Error signing proposal module=consensus height=1 round=0 err="Error signing proposal: Step regression at height 1 round 0. Got 1, last step 2"
I[2019-02-03|18:13:02.233] Timed out module=consensus dur=3s height=1 round=0 step=RoundStepPropose
I[2019-02-03|18:13:02.233] enterPrevote(1/0). Current: 1/0/RoundStepPropose module=consensus
I[2019-02-03|18:13:02.233] enterPrevote: ProposalBlock is nil module=consensus height=1 round=0
E[2019-02-03|18:13:02.234] Error signing vote module=consensus height=1 round=0 vote="Vote{0:AD278B7767B0 1/00/1(Prevote) 000000000000 000000000000 @ 2019-02-04T02:13:02.233897Z}" err="Error signing vote: Conflicting data"
```

Notice the EOF, the step regression, and the conflicting data.

* wal: change errors to be DataCorruptionError

* exit on corrupt WAL

* fix log

* fix new line

in the attempt to fix https://circleci.com/gh/tendermint/tendermint/43165

also

    code is simplified by running gofmt -s .
    remove unused vars
    enable linters we're currently passing
    remove deprecated linters

As per conversation here: https://github.com/tendermint/tendermint/pull/3218#discussion_r251364041

This is the result of running the following code on the repo:

```bash
find . -name '*.go' | grep -v 'vendor/' | xargs -n 1 goimports -w
```

Fixes #3179

* Consolidates deadline tests for privval Unix/TCP

Following on from #3115 and #3132, this converts fundamental timeout
errors from the client's `acceptConnection()` method so that these can
be detected by the test for the TCP connection.

Timeout deadlines are now tested for both TCP and Unix domain socket
connections.

There is also no need for the additional secret connection code: the
connection will time out at the `acceptConnection()` phase for TCP
connections, and will time out when attempting to obtain the
`RemoteSigner`'s public key for Unix domain socket connections.

* Removes extraneous logging

* Adds IsConnTimeout helper function

This commit adds a helper function to detect whether an error is either
a fundamental networking timeout error, or an `ErrConnTimeout` error
specific to the `RemoteSigner` class.

* Adds a test for the IsConnTimeout() helper function

* Separates tests logically for IsConnTimeout

* Adds a random suffix to temporary Unix sockets during testing

* Adds Unix domain socket tests for client (FAILING)

This adds Unix domain socket tests for the privval client. Right now,
one of the tests (TestRemoteSignerRetry) fails, probably because the
Unix domain socket state is known instantaneously on both sides by the
OS. Committing this to collaborate on the error.

* Removes extraneous logging

* Completes testing of Unix sockets client version

This completes the testing of the client connecting via Unix sockets.
There are two specific tests (TestSocketPVDeadline and
TestRemoteSignerRetryTCPOnly) that are only relevant to TCP connections.

* Renames test to show TCP-specificity

* Adds testing into closures for consistency (forgot previously)

* Moves test specific to RemoteSigner into own file

As per discussion on #3132, `TestRemoteSignerRetryTCPOnly` doesn't
really belong with the client tests. This moves it into its own file
related to the `RemoteSigner` class.

https://github.com/tendermint/tendermint/pull/2923#pullrequestreview-192065694

This cuts out two tests by constructing test cases and iterating through
them, rather than having separate sets of tests for TCP and Unix listeners.
This is as per the feedback from #3121.

As per #3115, adds simple Unix socket connect/accept deadline tests in
pretty much the same way as the TCP connect/accept deadline tests work.

* Close and recreate a RemoteSigner on err

* Update changelog

* Address Anton's comments / suggestions:

 - update changelog
 - restart TCPVal
 - shut down on `ErrUnexpectedResponse`

* re-init remote signer client with fresh connection if Ping fails

- add/update TODOs in secret connection
- rename tcp.go -> tcp_client.go, same with ipc to clarify their purpose

* account for `conn returned by waitConnection can be `nil`

- also add TODO about RemoteSigner conn field

* Tests for retrying: IPC / TCP

 - shorter info log on success
 - set conn and use it in tests to close conn

* Tests for retrying: IPC / TCP

 - shorter info log on success
 - set conn and use it in tests to close conn
 - add rwmutex for conn field in IPC

* comments and doc.go

* fix ipc tests. fixes #2677

* use constants for tests

* cleanup some error statements

* fixes #2784, race in tests

* remove print statement

* minor fixes from review

* update comment on sts spec

* cosmetics

* p2p/conn: add failing tests

* p2p/conn: make SecretConnection thread safe

* changelog

* IPCVal signer refactor

- use a .reset() method
- don't use embedded RemoteSignerClient
- guard RemoteSignerClient with mutex
- drop the .conn
- expose Close() on RemoteSignerClient

* apply IPCVal refactor to TCPVal

* remove mtx from RemoteSignerClient

* consolidate IPCVal and TCPVal, fixes #3104

- done in tcp_client.go
- now called SocketVal
- takes a listener in the constructor
- make tcpListener and unixListener contain all the differences

* delete ipc files

* introduce unix and tcp dialer for RemoteSigner

* rename files

- drop tcp_ prefix
- rename priv_validator.go to file.go

* bring back listener options

* fix node

* fix priv_val_server

* fix node test

* minor cleanup and comments

privval: remove GetAddress(), memoize pubkey

* split immutable and mutable parts of priv_validator.json

* fix bugs

* minor changes

* retrig test

* delete scripts/wire2amino.go

* fix test

* fixes from review

* privval: remove mtx

* rearrange priv_validator.go

* upgrade path

* write tests for the upgrade

* fix for unsafe_reset_all

* add test

* add reset test

* 2871 remove proposalHeartbeat infrastructure

* 2871 add preliminary changelog entry

* update ConsensusState#OnStop comment

* consensus: set logger for WAL in tests

* refactor privValidator client code and tests

follow-up on https://github.com/tendermint/tendermint/pull/2866

* Align Proposal message with spec

* Update spec

* catch up with amino changes in
https://github.com/tendermint/go-amino/pull/222

* WIP: update to amino v0.13.0

* update to fixed amino release

Ref: #2563

I added IPC as an unencrypted alternative to SocketPV.

Besides I fixed the following aspects of SocketPV:

Added locking since we are operating on a single socket
The connection deadline is extended every time a successful packet exchange happens; otherwise the connection would always die permanently x seconds after the connection was established.
Added a ping/heartbeat mechanism to keep the connection alive; native TCP keepalives do not work in this use-case


* Extend the SecureConn socket to extend its deadline
* Add locking & ping/heartbeat packets to SocketPV
* Implement IPC PV and abstract socket signing
* Refactored IPC and SocketPV
* Implement @melekes comments
* Fixes to rebase

* WIP: switching to fixed offsets for SignBytes

* add version field to sign bytes and update order

* more comments on test-cases and add a tc with a chainID

* remove amino:"write_empty" tag

- it doesn't affect if default fixed size fields ((u)int64) are
written or not
- add comment about int->int64 casting

* update CHANGELOG_PENDING

* update documentation

* add back link to issue #1622 in documentation

* remove JSON tags and add (failing test-case)

* fix failing test

* update test-vectors due to added `Type` field

* change Type field from string to byte and add new type alias

- SignedMsgType replaces VoteTypePrevote, VoteTypePrecommit and adds new
ProposalType to separate votes from proposal when signed

- update test-vectors

* fix remains from rebasing

* use SignMessageType instead of byte everywhere

* fixes from review

* privval: set deadline in readMsg

* fixes from review

* remove some XXX

* config: remove Mempool.RecheckEmpty

* docs: remove recheck_empty

* switch to amino for SignBytes and add Reply with error message

- currently only Vote is done

* switch Reply type in socket for other messages

 - add error description on error

* add TODOs regarding error handling

* address comments from peer review session (thx @xla)

 - contains all changes besides the test-coverage / error'ing branches

* increase test coverage:

 - add tests for each newly introduced error'ing code path

* return error if received wrong response

* add test for wrong response branches (ErrUnexpectedResponse)

* update CHANGELOG_PENDING and related documentation (spec)

* fix typo: s/CanonicallockID/CanonicalBlockID

* fixes from review

* Implement BFT time

* set LastValidators when creating state in state helper

for heights >= 2

* libs: Remove usage of custom Fmt, in favor of fmt.Sprintf

Closes #2193

* Fix bug that was masked by custom Fmt!

Signatures are now []byte, which saves on the number of bytes after
amino encoding

(squash this) address Ismail's comment

Our Tempfile was just a wrapper on ioutil that panicked instead of error.

Our Tempdir was a less safe variant of ioutil's Tempdir.

before: 1.000000003s
after: 3.000000000s

Refs #2027

Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.

Ref discussion: https://github.com/tendermint/tendermint/pull/1966

Closes #1956

This reverts commit 58d0c8de89.

This reverts commit d02c5d1e30.