You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

371 lines
8.8 KiB

p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
  1. package p2p
  2. import (
  3. "fmt"
  4. "io"
  5. "net"
  6. "runtime/debug"
  7. "time"
  8. tmconn "github.com/tendermint/tendermint/internal/p2p/conn"
  9. "github.com/tendermint/tendermint/libs/cmap"
  10. "github.com/tendermint/tendermint/libs/log"
  11. "github.com/tendermint/tendermint/libs/service"
  12. "github.com/tendermint/tendermint/types"
  13. )
  14. //go:generate ../../scripts/mockery_generate.sh Peer
  15. const metricsTickerDuration = 10 * time.Second
  16. // Peer is an interface representing a peer connected on a reactor.
  17. type Peer interface {
  18. service.Service
  19. FlushStop()
  20. ID() types.NodeID // peer's cryptographic ID
  21. RemoteIP() net.IP // remote IP of the connection
  22. RemoteAddr() net.Addr // remote address of the connection
  23. IsOutbound() bool // did we dial the peer
  24. IsPersistent() bool // do we redial this peer when we disconnect
  25. CloseConn() error // close original connection
  26. NodeInfo() types.NodeInfo // peer's info
  27. Status() tmconn.ConnectionStatus
  28. SocketAddr() *NetAddress // actual address of the socket
  29. Send(byte, []byte) bool
  30. TrySend(byte, []byte) bool
  31. Set(string, interface{})
  32. Get(string) interface{}
  33. }
  34. //----------------------------------------------------------
  35. // peerConn contains the raw connection and its config.
  36. type peerConn struct {
  37. outbound bool
  38. persistent bool
  39. conn Connection
  40. ip net.IP // cached RemoteIP()
  41. }
  42. func newPeerConn(outbound, persistent bool, conn Connection) peerConn {
  43. return peerConn{
  44. outbound: outbound,
  45. persistent: persistent,
  46. conn: conn,
  47. }
  48. }
  49. // Return the IP from the connection RemoteAddr
  50. func (pc peerConn) RemoteIP() net.IP {
  51. if pc.ip == nil {
  52. pc.ip = pc.conn.RemoteEndpoint().IP
  53. }
  54. return pc.ip
  55. }
  56. // peer implements Peer.
  57. //
  58. // Before using a peer, you will need to perform a handshake on connection.
  59. type peer struct {
  60. service.BaseService
  61. // raw peerConn and the multiplex connection
  62. peerConn
  63. // peer's node info and the channel it knows about
  64. // channels = nodeInfo.Channels
  65. // cached to avoid copying nodeInfo in hasChannel
  66. nodeInfo types.NodeInfo
  67. channels []byte
  68. reactors map[byte]Reactor
  69. onPeerError func(Peer, interface{})
  70. // User data
  71. Data *cmap.CMap
  72. metrics *Metrics
  73. metricsTicker *time.Ticker
  74. }
  75. type PeerOption func(*peer)
  76. func newPeer(
  77. nodeInfo types.NodeInfo,
  78. pc peerConn,
  79. reactorsByCh map[byte]Reactor,
  80. onPeerError func(Peer, interface{}),
  81. options ...PeerOption,
  82. ) *peer {
  83. p := &peer{
  84. peerConn: pc,
  85. nodeInfo: nodeInfo,
  86. channels: nodeInfo.Channels,
  87. reactors: reactorsByCh,
  88. onPeerError: onPeerError,
  89. Data: cmap.NewCMap(),
  90. metricsTicker: time.NewTicker(metricsTickerDuration),
  91. metrics: NopMetrics(),
  92. }
  93. p.BaseService = *service.NewBaseService(nil, "Peer", p)
  94. for _, option := range options {
  95. option(p)
  96. }
  97. return p
  98. }
  99. // onError calls the peer error callback.
  100. func (p *peer) onError(err interface{}) {
  101. p.onPeerError(p, err)
  102. }
  103. // String representation.
  104. func (p *peer) String() string {
  105. if p.outbound {
  106. return fmt.Sprintf("Peer{%v %v out}", p.conn, p.ID())
  107. }
  108. return fmt.Sprintf("Peer{%v %v in}", p.conn, p.ID())
  109. }
  110. //---------------------------------------------------
  111. // Implements service.Service
  112. // SetLogger implements BaseService.
  113. func (p *peer) SetLogger(l log.Logger) {
  114. p.Logger = l
  115. }
  116. // OnStart implements BaseService.
  117. func (p *peer) OnStart() error {
  118. if err := p.BaseService.OnStart(); err != nil {
  119. return err
  120. }
  121. go p.processMessages()
  122. go p.metricsReporter()
  123. return nil
  124. }
  125. // processMessages processes messages received from the connection.
  126. func (p *peer) processMessages() {
  127. defer func() {
  128. if r := recover(); r != nil {
  129. p.Logger.Error("peer message processing panic", "err", r, "stack", string(debug.Stack()))
  130. p.onError(fmt.Errorf("panic during peer message processing: %v", r))
  131. }
  132. }()
  133. for {
  134. chID, msg, err := p.conn.ReceiveMessage()
  135. if err != nil {
  136. p.onError(err)
  137. return
  138. }
  139. reactor, ok := p.reactors[byte(chID)]
  140. if !ok {
  141. p.onError(fmt.Errorf("unknown channel %v", chID))
  142. return
  143. }
  144. reactor.Receive(byte(chID), p, msg)
  145. }
  146. }
  147. // FlushStop mimics OnStop but additionally ensures that all successful
  148. // .Send() calls will get flushed before closing the connection.
  149. // NOTE: it is not safe to call this method more than once.
  150. func (p *peer) FlushStop() {
  151. p.metricsTicker.Stop()
  152. p.BaseService.OnStop()
  153. if err := p.conn.FlushClose(); err != nil {
  154. p.Logger.Debug("error while stopping peer", "err", err)
  155. }
  156. }
  157. // OnStop implements BaseService.
  158. func (p *peer) OnStop() {
  159. p.metricsTicker.Stop()
  160. p.BaseService.OnStop()
  161. if err := p.conn.Close(); err != nil {
  162. p.Logger.Debug("error while stopping peer", "err", err)
  163. }
  164. }
  165. //---------------------------------------------------
  166. // Implements Peer
  167. // ID returns the peer's ID - the hex encoded hash of its pubkey.
  168. func (p *peer) ID() types.NodeID {
  169. return p.nodeInfo.ID()
  170. }
  171. // IsOutbound returns true if the connection is outbound, false otherwise.
  172. func (p *peer) IsOutbound() bool {
  173. return p.peerConn.outbound
  174. }
  175. // IsPersistent returns true if the peer is persitent, false otherwise.
  176. func (p *peer) IsPersistent() bool {
  177. return p.peerConn.persistent
  178. }
  179. // NodeInfo returns a copy of the peer's NodeInfo.
  180. func (p *peer) NodeInfo() types.NodeInfo {
  181. return p.nodeInfo
  182. }
  183. // SocketAddr returns the address of the socket.
  184. // For outbound peers, it's the address dialed (after DNS resolution).
  185. // For inbound peers, it's the address returned by the underlying connection
  186. // (not what's reported in the peer's NodeInfo).
  187. func (p *peer) SocketAddr() *NetAddress {
  188. endpoint := p.peerConn.conn.RemoteEndpoint()
  189. return &NetAddress{
  190. ID: p.ID(),
  191. IP: endpoint.IP,
  192. Port: endpoint.Port,
  193. }
  194. }
  195. // Status returns the peer's ConnectionStatus.
  196. func (p *peer) Status() tmconn.ConnectionStatus {
  197. return p.conn.Status()
  198. }
  199. // Send msg bytes to the channel identified by chID byte. Returns false if the
  200. // send queue is full after timeout, specified by MConnection.
  201. func (p *peer) Send(chID byte, msgBytes []byte) bool {
  202. if !p.IsRunning() {
  203. // see Switch#Broadcast, where we fetch the list of peers and loop over
  204. // them - while we're looping, one peer may be removed and stopped.
  205. return false
  206. } else if !p.hasChannel(chID) {
  207. return false
  208. }
  209. res, err := p.conn.SendMessage(ChannelID(chID), msgBytes)
  210. if err == io.EOF {
  211. return false
  212. } else if err != nil {
  213. p.onError(err)
  214. return false
  215. }
  216. if res {
  217. labels := []string{
  218. "peer_id", string(p.ID()),
  219. "chID", fmt.Sprintf("%#x", chID),
  220. }
  221. p.metrics.PeerSendBytesTotal.With(labels...).Add(float64(len(msgBytes)))
  222. }
  223. return res
  224. }
  225. // TrySend msg bytes to the channel identified by chID byte. Immediately returns
  226. // false if the send queue is full.
  227. func (p *peer) TrySend(chID byte, msgBytes []byte) bool {
  228. if !p.IsRunning() {
  229. return false
  230. } else if !p.hasChannel(chID) {
  231. return false
  232. }
  233. res, err := p.conn.TrySendMessage(ChannelID(chID), msgBytes)
  234. if err == io.EOF {
  235. return false
  236. } else if err != nil {
  237. p.onError(err)
  238. return false
  239. }
  240. if res {
  241. labels := []string{
  242. "peer_id", string(p.ID()),
  243. "chID", fmt.Sprintf("%#x", chID),
  244. }
  245. p.metrics.PeerSendBytesTotal.With(labels...).Add(float64(len(msgBytes)))
  246. }
  247. return res
  248. }
  249. // Get the data for a given key.
  250. func (p *peer) Get(key string) interface{} {
  251. return p.Data.Get(key)
  252. }
  253. // Set sets the data for the given key.
  254. func (p *peer) Set(key string, data interface{}) {
  255. p.Data.Set(key, data)
  256. }
  257. // hasChannel returns true if the peer reported
  258. // knowing about the given chID.
  259. func (p *peer) hasChannel(chID byte) bool {
  260. for _, ch := range p.channels {
  261. if ch == chID {
  262. return true
  263. }
  264. }
  265. // NOTE: probably will want to remove this
  266. // but could be helpful while the feature is new
  267. p.Logger.Debug(
  268. "Unknown channel for peer",
  269. "channel",
  270. chID,
  271. "channels",
  272. p.channels,
  273. )
  274. return false
  275. }
  276. // CloseConn closes original connection. Used for cleaning up in cases where the peer had not been started at all.
  277. func (p *peer) CloseConn() error {
  278. return p.peerConn.conn.Close()
  279. }
  280. //---------------------------------------------------
  281. // methods only used for testing
  282. // TODO: can we remove these?
  283. // CloseConn closes the underlying connection
  284. func (pc *peerConn) CloseConn() {
  285. pc.conn.Close()
  286. }
  287. // RemoteAddr returns peer's remote network address.
  288. func (p *peer) RemoteAddr() net.Addr {
  289. endpoint := p.conn.RemoteEndpoint()
  290. return &net.TCPAddr{
  291. IP: endpoint.IP,
  292. Port: int(endpoint.Port),
  293. }
  294. }
  295. //---------------------------------------------------
  296. func PeerMetrics(metrics *Metrics) PeerOption {
  297. return func(p *peer) {
  298. p.metrics = metrics
  299. }
  300. }
  301. func (p *peer) metricsReporter() {
  302. for {
  303. select {
  304. case <-p.metricsTicker.C:
  305. status := p.conn.Status()
  306. var sendQueueSize float64
  307. for _, chStatus := range status.Channels {
  308. sendQueueSize += float64(chStatus.SendQueueSize)
  309. }
  310. p.metrics.PeerPendingSendBytes.With("peer_id", string(p.ID())).Set(sendQueueSize)
  311. case <-p.Quit():
  312. return
  313. }
  314. }
  315. }