You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

518 lines
14 KiB

limit number of /subscribe clients and queries per client (#3269) * limit number of /subscribe clients and queries per client Add the following config variables (under [rpc] section): * max_subscription_clients * max_subscriptions_per_client * timeout_broadcast_tx_commit Fixes #2826 new HTTPClient interface for subscriptions finalize HTTPClient events interface remove EventSubscriber fix data race ``` WARNING: DATA RACE Read at 0x00c000a36060 by goroutine 129: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0 Previous write at 0x00c000a36060 by goroutine 132: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 129 (running) created at: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 132 (running) created at: testing.(*T).Run() /usr/local/go/src/testing/testing.go:878 +0x659 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 ================== ``` lite client works (tested manually) godoc comments httpclient: do not close the out channel use TimeoutBroadcastTxCommit no timeout for unsubscribe but 1s Local (5s HTTP) timeout for resubscribe format code change Subscribe#out cap to 1 and replace config vars with RPCConfig TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout rpc: Context as first parameter to all functions reformat code fixes after my own review fixes after Ethan's review add test stubs fix config.toml * fixes after manual testing - rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes Tendermint resources (pubsub) - rpc: better error in Subscribe and BroadcastTxCommit - HTTPClient: do not resubscribe if err = ErrAlreadySubscribed * fixes after Ismail's review * Update rpc/grpc/grpc_test.go Co-Authored-By: melekes <anton.kalyaev@gmail.com>
6 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
limit number of /subscribe clients and queries per client (#3269) * limit number of /subscribe clients and queries per client Add the following config variables (under [rpc] section): * max_subscription_clients * max_subscriptions_per_client * timeout_broadcast_tx_commit Fixes #2826 new HTTPClient interface for subscriptions finalize HTTPClient events interface remove EventSubscriber fix data race ``` WARNING: DATA RACE Read at 0x00c000a36060 by goroutine 129: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0 Previous write at 0x00c000a36060 by goroutine 132: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 129 (running) created at: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 132 (running) created at: testing.(*T).Run() /usr/local/go/src/testing/testing.go:878 +0x659 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 ================== ``` lite client works (tested manually) godoc comments httpclient: do not close the out channel use TimeoutBroadcastTxCommit no timeout for unsubscribe but 1s Local (5s HTTP) timeout for resubscribe format code change Subscribe#out cap to 1 and replace config vars with RPCConfig TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout rpc: Context as first parameter to all functions reformat code fixes after my own review fixes after Ethan's review add test stubs fix config.toml * fixes after manual testing - rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes Tendermint resources (pubsub) - rpc: better error in Subscribe and BroadcastTxCommit - HTTPClient: do not resubscribe if err = ErrAlreadySubscribed * fixes after Ismail's review * Update rpc/grpc/grpc_test.go Co-Authored-By: melekes <anton.kalyaev@gmail.com>
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
limit number of /subscribe clients and queries per client (#3269) * limit number of /subscribe clients and queries per client Add the following config variables (under [rpc] section): * max_subscription_clients * max_subscriptions_per_client * timeout_broadcast_tx_commit Fixes #2826 new HTTPClient interface for subscriptions finalize HTTPClient events interface remove EventSubscriber fix data race ``` WARNING: DATA RACE Read at 0x00c000a36060 by goroutine 129: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0 Previous write at 0x00c000a36060 by goroutine 132: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 129 (running) created at: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 132 (running) created at: testing.(*T).Run() /usr/local/go/src/testing/testing.go:878 +0x659 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 ================== ``` lite client works (tested manually) godoc comments httpclient: do not close the out channel use TimeoutBroadcastTxCommit no timeout for unsubscribe but 1s Local (5s HTTP) timeout for resubscribe format code change Subscribe#out cap to 1 and replace config vars with RPCConfig TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout rpc: Context as first parameter to all functions reformat code fixes after my own review fixes after Ethan's review add test stubs fix config.toml * fixes after manual testing - rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes Tendermint resources (pubsub) - rpc: better error in Subscribe and BroadcastTxCommit - HTTPClient: do not resubscribe if err = ErrAlreadySubscribed * fixes after Ismail's review * Update rpc/grpc/grpc_test.go Co-Authored-By: melekes <anton.kalyaev@gmail.com>
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
limit number of /subscribe clients and queries per client (#3269) * limit number of /subscribe clients and queries per client Add the following config variables (under [rpc] section): * max_subscription_clients * max_subscriptions_per_client * timeout_broadcast_tx_commit Fixes #2826 new HTTPClient interface for subscriptions finalize HTTPClient events interface remove EventSubscriber fix data race ``` WARNING: DATA RACE Read at 0x00c000a36060 by goroutine 129: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe.func1() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:168 +0x1f0 Previous write at 0x00c000a36060 by goroutine 132: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:191 +0x4e0 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 129 (running) created at: github.com/tendermint/tendermint/rpc/client.(*Local).Subscribe() /go/src/github.com/tendermint/tendermint/rpc/client/localclient.go:164 +0x4b7 github.com/tendermint/tendermint/rpc/client.WaitForOneEvent() /go/src/github.com/tendermint/tendermint/rpc/client/helpers.go:64 +0x178 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync.func1() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:139 +0x298 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 Goroutine 132 (running) created at: testing.(*T).Run() /usr/local/go/src/testing/testing.go:878 +0x659 github.com/tendermint/tendermint/rpc/client_test.TestTxEventsSentWithBroadcastTxSync() /go/src/github.com/tendermint/tendermint/rpc/client/event_test.go:119 +0x186 testing.tRunner() /usr/local/go/src/testing/testing.go:827 +0x162 ================== ``` lite client works (tested manually) godoc comments httpclient: do not close the out channel use TimeoutBroadcastTxCommit no timeout for unsubscribe but 1s Local (5s HTTP) timeout for resubscribe format code change Subscribe#out cap to 1 and replace config vars with RPCConfig TimeoutBroadcastTxCommit can't be greater than rpcserver.WriteTimeout rpc: Context as first parameter to all functions reformat code fixes after my own review fixes after Ethan's review add test stubs fix config.toml * fixes after manual testing - rpc: do not recommend to use BroadcastTxCommit because it's slow and wastes Tendermint resources (pubsub) - rpc: better error in Subscribe and BroadcastTxCommit - HTTPClient: do not resubscribe if err = ErrAlreadySubscribed * fixes after Ismail's review * Update rpc/grpc/grpc_test.go Co-Authored-By: melekes <anton.kalyaev@gmail.com>
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
7 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
rpc: add support for batched requests/responses (#3534) Continues from #3280 in building support for batched requests/responses in the JSON RPC (as per issue #3213). * Add JSON RPC batching for client and server As per #3213, this adds support for [JSON RPC batch requests and responses](https://www.jsonrpc.org/specification#batch). * Add additional checks to ensure client responses are the same as results * Fix case where a notification is sent and no response is expected * Add test to check that JSON RPC notifications in a batch are left out in responses * Update CHANGELOG_PENDING.md * Update PR number now that PR has been created * Make errors start with lowercase letter * Refactor batch functionality to be standalone This refactors the batching functionality to rather act in a standalone way. In light of supporting concurrent goroutines making use of the same client, it would make sense to have batching functionality where one could create a batch of requests per goroutine and send that batch without interfering with a batch from another goroutine. * Add examples for simple and batch HTTP client usage * Check errors from writer and remove nolinter directives * Make error strings start with lowercase letter * Refactor examples to make them testable * Use safer deferred shutdown for example Tendermint test node * Recompose rpcClient interface from pre-existing interface components * Rename WaitGroup for brevity * Replace empty ID string with request ID * Remove extraneous test case * Convert first letter of errors.Wrap() messages to lowercase * Remove extraneous function parameter * Make variable declaration terse * Reorder WaitGroup.Done call to help prevent race conditions in the face of failure * Swap mutex to value representation and remove initialization * Restore empty JSONRPC string ID in response to prevent nil * Make JSONRPCBufferedRequest private * Revert PR hard link in CHANGELOG_PENDING * Add client ID for JSONRPCClient This adds code to automatically generate a randomized client ID for the JSONRPCClient, and adds a check of the IDs in the responses (if one was set in the requests). * Extract response ID validation into separate function * Remove extraneous comments * Reorder fields to indicate clearly which are protected by the mutex * Refactor for loop to remove indexing * Restructure and combine loop * Flatten conditional block for better readability * Make multi-variable declaration slightly more readable * Change for loop style * Compress error check statements * Make function description more generic to show that we support different protocols * Preallocate memory for request and result objects
6 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
lite2: light client with weak subjectivity (#3989) Refs #1771 ADR: https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-044-lite-client-with-weak-subjectivity.md ## Commits: * add Verifier and VerifyCommitTrusting * add two more checks make trustLevel an option * float32 for trustLevel * check newHeader time * started writing lite Client * unify Verify methods * ensure h2.Header.bfttime < h1.Header.bfttime + tp * move trust checks into Verify function * add more comments * more docs * started writing tests * unbonding period failures * tests are green * export ErrNewHeaderTooFarIntoFuture * make golangci happy * test for non-adjusted headers * more precision * providers and stores * VerifyHeader and VerifyHeaderAtHeight funcs * fix compile errors * remove lastVerifiedHeight, persist new trusted header * sequential verification * remove TrustedStore option * started writing tests for light client * cover basic cases for linear verification * bisection tests PASS * rename BisectingVerification to SkippingVerification * refactor the code * add TrustedHeader method * consolidate sequential verification tests * consolidate skipping verification tests * rename trustedVals to trustedNextVals * start writing docs * ValidateTrustLevel func and ErrOldHeaderExpired error * AutoClient and example tests * fix errors * update doc * remove ErrNewHeaderTooFarIntoFuture This check is unnecessary given existing a) ErrOldHeaderExpired b) h2.Time > now checks. * return an error if we're at more recent height * add comments * add LastSignedHeaderHeight method to Store I think it's fine if Store tracks last height * copy over proxy from old lite package * make TrustedHeader return latest if height=0 * modify LastSignedHeaderHeight to return an error if no headers exist * copy over proxy impl * refactor proxy and start http lite client * Tx and BlockchainInfo methods * Block method * commit method * code compiles again * lite client compiles * extract updateLiteClientIfNeededTo func * move final parts * add placeholder for tests * force usage of lite http client in proxy * comment out query tests for now * explicitly mention tp: trusting period * verify nextVals in VerifyHeader * refactor bisection * move the NextValidatorsHash check into updateTrustedHeaderAndVals + update the comment * add ConsensusParams method to RPC client * add ConsensusParams to rpc/mock/client * change trustLevel type to a new cmn.Fraction type + update SkippingVerification comment * stress out trustLevel is only used for non-adjusted headers * fixes after Fede's review Co-authored-by: Federico Kunze <31522760+fedekunze@users.noreply.github.com> * compare newHeader with a header from an alternative provider * save pivot header Refs https://github.com/tendermint/tendermint/pull/3989#discussion_r349122824 * check header can still be trusted in TrustedHeader Refs https://github.com/tendermint/tendermint/pull/3989#discussion_r349101424 * lite: update Validators and Block endpoints - Block no longer contains BlockMeta - Validators now accept two additional params: page and perPage * make linter happy
5 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
cleanup: Reduce and normalize import path aliasing. (#6975) The code in the Tendermint repository makes heavy use of import aliasing. This is made necessary by our extensive reuse of common base package names, and by repetition of similar names across different subdirectories. Unfortunately we have not been very consistent about which packages we alias in various circumstances, and the aliases we use vary. In the spirit of the advice in the style guide and https://github.com/golang/go/wiki/CodeReviewComments#imports, his change makes an effort to clean up and normalize import aliasing. This change makes no API or behavioral changes. It is a pure cleanup intended o help make the code more readable to developers (including myself) trying to understand what is being imported where. Only unexported names have been modified, and the changes were generated and applied mechanically with gofmt -r and comby, respecting the lexical and syntactic rules of Go. Even so, I did not fix every inconsistency. Where the changes would be too disruptive, I left it alone. The principles I followed in this cleanup are: - Remove aliases that restate the package name. - Remove aliases where the base package name is unambiguous. - Move overly-terse abbreviations from the import to the usage site. - Fix lexical issues (remove underscores, remove capitalization). - Fix import groupings to more closely match the style guide. - Group blank (side-effecting) imports and ensure they are commented. - Add aliases to multiple imports with the same base package name.
3 years ago
  1. package http
  2. import (
  3. "context"
  4. "errors"
  5. "net/http"
  6. "time"
  7. "github.com/tendermint/tendermint/libs/bytes"
  8. rpcclient "github.com/tendermint/tendermint/rpc/client"
  9. "github.com/tendermint/tendermint/rpc/coretypes"
  10. jsonrpcclient "github.com/tendermint/tendermint/rpc/jsonrpc/client"
  11. "github.com/tendermint/tendermint/types"
  12. )
  13. /*
  14. HTTP is a Client implementation that communicates with a Tendermint node over
  15. JSON RPC and WebSockets.
  16. This is the main implementation you probably want to use in production code.
  17. There are other implementations when calling the Tendermint node in-process
  18. (Local), or when you want to mock out the server for test code (mock).
  19. You can subscribe for any event published by Tendermint using Subscribe method.
  20. Note delivery is best-effort. If you don't read events fast enough or network is
  21. slow, Tendermint might cancel the subscription. The client will attempt to
  22. resubscribe (you don't need to do anything). It will keep trying every second
  23. indefinitely until successful.
  24. Request batching is available for JSON RPC requests over HTTP, which conforms to
  25. the JSON RPC specification (https://www.jsonrpc.org/specification#batch). See
  26. the example for more details.
  27. Example:
  28. c, err := New("http://192.168.1.10:26657")
  29. if err != nil {
  30. // handle error
  31. }
  32. // call Start/Stop if you're subscribing to events
  33. err = c.Start()
  34. if err != nil {
  35. // handle error
  36. }
  37. defer c.Stop()
  38. res, err := c.Status()
  39. if err != nil {
  40. // handle error
  41. }
  42. // handle result
  43. */
  44. type HTTP struct {
  45. remote string
  46. rpc *jsonrpcclient.Client
  47. *baseRPCClient
  48. *wsEvents
  49. }
  50. // BatchHTTP provides the same interface as `HTTP`, but allows for batching of
  51. // requests (as per https://www.jsonrpc.org/specification#batch). Do not
  52. // instantiate directly - rather use the HTTP.NewBatch() method to create an
  53. // instance of this struct.
  54. //
  55. // Batching of HTTP requests is thread-safe in the sense that multiple
  56. // goroutines can each create their own batches and send them using the same
  57. // HTTP client. Multiple goroutines could also enqueue transactions in a single
  58. // batch, but ordering of transactions in the batch cannot be guaranteed in such
  59. // an example.
  60. type BatchHTTP struct {
  61. rpcBatch *jsonrpcclient.RequestBatch
  62. *baseRPCClient
  63. }
  64. // rpcClient is an internal interface to which our RPC clients (batch and
  65. // non-batch) must conform. Acts as an additional code-level sanity check to
  66. // make sure the implementations stay coherent.
  67. type rpcClient interface {
  68. rpcclient.ABCIClient
  69. rpcclient.HistoryClient
  70. rpcclient.NetworkClient
  71. rpcclient.SignClient
  72. rpcclient.StatusClient
  73. }
  74. // baseRPCClient implements the basic RPC method logic without the actual
  75. // underlying RPC call functionality, which is provided by `caller`.
  76. type baseRPCClient struct {
  77. caller jsonrpcclient.Caller
  78. }
  79. var (
  80. _ rpcClient = (*HTTP)(nil)
  81. _ rpcClient = (*BatchHTTP)(nil)
  82. _ rpcClient = (*baseRPCClient)(nil)
  83. )
  84. //-----------------------------------------------------------------------------
  85. // HTTP
  86. // New takes a remote endpoint in the form <protocol>://<host>:<port>. An error
  87. // is returned on invalid remote.
  88. func New(remote string) (*HTTP, error) {
  89. c, err := jsonrpcclient.DefaultHTTPClient(remote)
  90. if err != nil {
  91. return nil, err
  92. }
  93. return NewWithClient(remote, c)
  94. }
  95. // NewWithTimeout does the same thing as New, except you can set a Timeout for
  96. // http.Client. A Timeout of zero means no timeout.
  97. func NewWithTimeout(remote string, t time.Duration) (*HTTP, error) {
  98. c, err := jsonrpcclient.DefaultHTTPClient(remote)
  99. if err != nil {
  100. return nil, err
  101. }
  102. c.Timeout = t
  103. return NewWithClient(remote, c)
  104. }
  105. // NewWithClient constructs an RPC client using a custom HTTP client.
  106. // An error is reported if c == nil or remote is an invalid address.
  107. func NewWithClient(remote string, c *http.Client) (*HTTP, error) {
  108. if c == nil {
  109. return nil, errors.New("nil client")
  110. }
  111. rpc, err := jsonrpcclient.NewWithHTTPClient(remote, c)
  112. if err != nil {
  113. return nil, err
  114. }
  115. wsEvents, err := newWsEvents(remote)
  116. if err != nil {
  117. return nil, err
  118. }
  119. httpClient := &HTTP{
  120. rpc: rpc,
  121. remote: remote,
  122. baseRPCClient: &baseRPCClient{caller: rpc},
  123. wsEvents: wsEvents,
  124. }
  125. return httpClient, nil
  126. }
  127. var _ rpcclient.Client = (*HTTP)(nil)
  128. // Remote returns the remote network address in a string form.
  129. func (c *HTTP) Remote() string {
  130. return c.remote
  131. }
  132. // NewBatch creates a new batch client for this HTTP client.
  133. func (c *HTTP) NewBatch() *BatchHTTP {
  134. rpcBatch := c.rpc.NewRequestBatch()
  135. return &BatchHTTP{
  136. rpcBatch: rpcBatch,
  137. baseRPCClient: &baseRPCClient{
  138. caller: rpcBatch,
  139. },
  140. }
  141. }
  142. //-----------------------------------------------------------------------------
  143. // BatchHTTP
  144. // Send is a convenience function for an HTTP batch that will trigger the
  145. // compilation of the batched requests and send them off using the client as a
  146. // single request. On success, this returns a list of the deserialized results
  147. // from each request in the sent batch.
  148. func (b *BatchHTTP) Send(ctx context.Context) ([]interface{}, error) {
  149. return b.rpcBatch.Send(ctx)
  150. }
  151. // Clear will empty out this batch of requests and return the number of requests
  152. // that were cleared out.
  153. func (b *BatchHTTP) Clear() int {
  154. return b.rpcBatch.Clear()
  155. }
  156. // Count returns the number of enqueued requests waiting to be sent.
  157. func (b *BatchHTTP) Count() int {
  158. return b.rpcBatch.Count()
  159. }
  160. //-----------------------------------------------------------------------------
  161. // baseRPCClient
  162. func (c *baseRPCClient) Status(ctx context.Context) (*coretypes.ResultStatus, error) {
  163. result := new(coretypes.ResultStatus)
  164. if err := c.caller.Call(ctx, "status", nil, result); err != nil {
  165. return nil, err
  166. }
  167. return result, nil
  168. }
  169. func (c *baseRPCClient) ABCIInfo(ctx context.Context) (*coretypes.ResultABCIInfo, error) {
  170. result := new(coretypes.ResultABCIInfo)
  171. if err := c.caller.Call(ctx, "abci_info", nil, result); err != nil {
  172. return nil, err
  173. }
  174. return result, nil
  175. }
  176. func (c *baseRPCClient) ABCIQuery(
  177. ctx context.Context,
  178. path string,
  179. data bytes.HexBytes,
  180. ) (*coretypes.ResultABCIQuery, error) {
  181. return c.ABCIQueryWithOptions(ctx, path, data, rpcclient.DefaultABCIQueryOptions)
  182. }
  183. func (c *baseRPCClient) ABCIQueryWithOptions(
  184. ctx context.Context,
  185. path string,
  186. data bytes.HexBytes,
  187. opts rpcclient.ABCIQueryOptions) (*coretypes.ResultABCIQuery, error) {
  188. result := new(coretypes.ResultABCIQuery)
  189. if err := c.caller.Call(ctx, "abci_query", abciQueryArgs{
  190. Path: path,
  191. Data: data,
  192. Height: opts.Height,
  193. Prove: opts.Prove,
  194. }, result); err != nil {
  195. return nil, err
  196. }
  197. return result, nil
  198. }
  199. func (c *baseRPCClient) BroadcastTxCommit(
  200. ctx context.Context,
  201. tx types.Tx,
  202. ) (*coretypes.ResultBroadcastTxCommit, error) {
  203. result := new(coretypes.ResultBroadcastTxCommit)
  204. if err := c.caller.Call(ctx, "broadcast_tx_commit", txArgs{Tx: tx}, result); err != nil {
  205. return nil, err
  206. }
  207. return result, nil
  208. }
  209. func (c *baseRPCClient) BroadcastTxAsync(
  210. ctx context.Context,
  211. tx types.Tx,
  212. ) (*coretypes.ResultBroadcastTx, error) {
  213. return c.broadcastTX(ctx, "broadcast_tx_async", tx)
  214. }
  215. func (c *baseRPCClient) BroadcastTxSync(
  216. ctx context.Context,
  217. tx types.Tx,
  218. ) (*coretypes.ResultBroadcastTx, error) {
  219. return c.broadcastTX(ctx, "broadcast_tx_sync", tx)
  220. }
  221. func (c *baseRPCClient) broadcastTX(
  222. ctx context.Context,
  223. route string,
  224. tx types.Tx,
  225. ) (*coretypes.ResultBroadcastTx, error) {
  226. result := new(coretypes.ResultBroadcastTx)
  227. if err := c.caller.Call(ctx, route, txArgs{Tx: tx}, result); err != nil {
  228. return nil, err
  229. }
  230. return result, nil
  231. }
  232. func (c *baseRPCClient) UnconfirmedTxs(
  233. ctx context.Context,
  234. page *int,
  235. perPage *int,
  236. ) (*coretypes.ResultUnconfirmedTxs, error) {
  237. result := new(coretypes.ResultUnconfirmedTxs)
  238. if err := c.caller.Call(ctx, "unconfirmed_txs", unconfirmedArgs{Page: page, PerPage: perPage}, result); err != nil {
  239. return nil, err
  240. }
  241. return result, nil
  242. }
  243. func (c *baseRPCClient) NumUnconfirmedTxs(ctx context.Context) (*coretypes.ResultUnconfirmedTxs, error) {
  244. result := new(coretypes.ResultUnconfirmedTxs)
  245. if err := c.caller.Call(ctx, "num_unconfirmed_txs", nil, result); err != nil {
  246. return nil, err
  247. }
  248. return result, nil
  249. }
  250. func (c *baseRPCClient) CheckTx(ctx context.Context, tx types.Tx) (*coretypes.ResultCheckTx, error) {
  251. result := new(coretypes.ResultCheckTx)
  252. if err := c.caller.Call(ctx, "check_tx", txArgs{Tx: tx}, result); err != nil {
  253. return nil, err
  254. }
  255. return result, nil
  256. }
  257. func (c *baseRPCClient) RemoveTx(ctx context.Context, txKey types.TxKey) error {
  258. if err := c.caller.Call(ctx, "remove_tx", txKeyArgs{TxKey: txKey[:]}, nil); err != nil {
  259. return err
  260. }
  261. return nil
  262. }
  263. func (c *baseRPCClient) NetInfo(ctx context.Context) (*coretypes.ResultNetInfo, error) {
  264. result := new(coretypes.ResultNetInfo)
  265. if err := c.caller.Call(ctx, "net_info", nil, result); err != nil {
  266. return nil, err
  267. }
  268. return result, nil
  269. }
  270. func (c *baseRPCClient) DumpConsensusState(ctx context.Context) (*coretypes.ResultDumpConsensusState, error) {
  271. result := new(coretypes.ResultDumpConsensusState)
  272. if err := c.caller.Call(ctx, "dump_consensus_state", nil, result); err != nil {
  273. return nil, err
  274. }
  275. return result, nil
  276. }
  277. func (c *baseRPCClient) ConsensusState(ctx context.Context) (*coretypes.ResultConsensusState, error) {
  278. result := new(coretypes.ResultConsensusState)
  279. if err := c.caller.Call(ctx, "consensus_state", nil, result); err != nil {
  280. return nil, err
  281. }
  282. return result, nil
  283. }
  284. func (c *baseRPCClient) ConsensusParams(
  285. ctx context.Context,
  286. height *int64,
  287. ) (*coretypes.ResultConsensusParams, error) {
  288. result := new(coretypes.ResultConsensusParams)
  289. if err := c.caller.Call(ctx, "consensus_params", heightArgs{Height: height}, result); err != nil {
  290. return nil, err
  291. }
  292. return result, nil
  293. }
  294. func (c *baseRPCClient) Events(ctx context.Context, req *coretypes.RequestEvents) (*coretypes.ResultEvents, error) {
  295. result := new(coretypes.ResultEvents)
  296. if err := c.caller.Call(ctx, "events", req, result); err != nil {
  297. return nil, err
  298. }
  299. return result, nil
  300. }
  301. func (c *baseRPCClient) Health(ctx context.Context) (*coretypes.ResultHealth, error) {
  302. result := new(coretypes.ResultHealth)
  303. if err := c.caller.Call(ctx, "health", nil, result); err != nil {
  304. return nil, err
  305. }
  306. return result, nil
  307. }
  308. func (c *baseRPCClient) BlockchainInfo(
  309. ctx context.Context,
  310. minHeight,
  311. maxHeight int64,
  312. ) (*coretypes.ResultBlockchainInfo, error) {
  313. result := new(coretypes.ResultBlockchainInfo)
  314. if err := c.caller.Call(ctx, "blockchain", blockchainInfoArgs{
  315. MinHeight: minHeight,
  316. MaxHeight: maxHeight,
  317. }, result); err != nil {
  318. return nil, err
  319. }
  320. return result, nil
  321. }
  322. func (c *baseRPCClient) Genesis(ctx context.Context) (*coretypes.ResultGenesis, error) {
  323. result := new(coretypes.ResultGenesis)
  324. if err := c.caller.Call(ctx, "genesis", nil, result); err != nil {
  325. return nil, err
  326. }
  327. return result, nil
  328. }
  329. func (c *baseRPCClient) GenesisChunked(ctx context.Context, id uint) (*coretypes.ResultGenesisChunk, error) {
  330. result := new(coretypes.ResultGenesisChunk)
  331. if err := c.caller.Call(ctx, "genesis_chunked", genesisChunkArgs{Chunk: id}, result); err != nil {
  332. return nil, err
  333. }
  334. return result, nil
  335. }
  336. func (c *baseRPCClient) Block(ctx context.Context, height *int64) (*coretypes.ResultBlock, error) {
  337. result := new(coretypes.ResultBlock)
  338. if err := c.caller.Call(ctx, "block", heightArgs{Height: height}, result); err != nil {
  339. return nil, err
  340. }
  341. return result, nil
  342. }
  343. func (c *baseRPCClient) BlockByHash(ctx context.Context, hash bytes.HexBytes) (*coretypes.ResultBlock, error) {
  344. result := new(coretypes.ResultBlock)
  345. if err := c.caller.Call(ctx, "block_by_hash", hashArgs{Hash: hash}, result); err != nil {
  346. return nil, err
  347. }
  348. return result, nil
  349. }
  350. func (c *baseRPCClient) BlockResults(
  351. ctx context.Context,
  352. height *int64,
  353. ) (*coretypes.ResultBlockResults, error) {
  354. result := new(coretypes.ResultBlockResults)
  355. if err := c.caller.Call(ctx, "block_results", heightArgs{Height: height}, result); err != nil {
  356. return nil, err
  357. }
  358. return result, nil
  359. }
  360. func (c *baseRPCClient) Header(ctx context.Context, height *int64) (*coretypes.ResultHeader, error) {
  361. result := new(coretypes.ResultHeader)
  362. if err := c.caller.Call(ctx, "header", heightArgs{Height: height}, result); err != nil {
  363. return nil, err
  364. }
  365. return result, nil
  366. }
  367. func (c *baseRPCClient) HeaderByHash(ctx context.Context, hash bytes.HexBytes) (*coretypes.ResultHeader, error) {
  368. result := new(coretypes.ResultHeader)
  369. if err := c.caller.Call(ctx, "header_by_hash", hashArgs{Hash: hash}, result); err != nil {
  370. return nil, err
  371. }
  372. return result, nil
  373. }
  374. func (c *baseRPCClient) Commit(ctx context.Context, height *int64) (*coretypes.ResultCommit, error) {
  375. result := new(coretypes.ResultCommit)
  376. if err := c.caller.Call(ctx, "commit", heightArgs{Height: height}, result); err != nil {
  377. return nil, err
  378. }
  379. return result, nil
  380. }
  381. func (c *baseRPCClient) Tx(ctx context.Context, hash bytes.HexBytes, prove bool) (*coretypes.ResultTx, error) {
  382. result := new(coretypes.ResultTx)
  383. if err := c.caller.Call(ctx, "tx", hashArgs{Hash: hash, Prove: prove}, result); err != nil {
  384. return nil, err
  385. }
  386. return result, nil
  387. }
  388. func (c *baseRPCClient) TxSearch(
  389. ctx context.Context,
  390. query string,
  391. prove bool,
  392. page,
  393. perPage *int,
  394. orderBy string,
  395. ) (*coretypes.ResultTxSearch, error) {
  396. result := new(coretypes.ResultTxSearch)
  397. if err := c.caller.Call(ctx, "tx_search", searchArgs{
  398. Query: query,
  399. Prove: prove,
  400. OrderBy: orderBy,
  401. Page: page,
  402. PerPage: perPage,
  403. }, result); err != nil {
  404. return nil, err
  405. }
  406. return result, nil
  407. }
  408. func (c *baseRPCClient) BlockSearch(
  409. ctx context.Context,
  410. query string,
  411. page, perPage *int,
  412. orderBy string,
  413. ) (*coretypes.ResultBlockSearch, error) {
  414. result := new(coretypes.ResultBlockSearch)
  415. if err := c.caller.Call(ctx, "block_search", searchArgs{
  416. Query: query,
  417. OrderBy: orderBy,
  418. Page: page,
  419. PerPage: perPage,
  420. }, result); err != nil {
  421. return nil, err
  422. }
  423. return result, nil
  424. }
  425. func (c *baseRPCClient) Validators(
  426. ctx context.Context,
  427. height *int64,
  428. page,
  429. perPage *int,
  430. ) (*coretypes.ResultValidators, error) {
  431. result := new(coretypes.ResultValidators)
  432. if err := c.caller.Call(ctx, "validators", validatorArgs{
  433. Height: height,
  434. Page: page,
  435. PerPage: perPage,
  436. }, result); err != nil {
  437. return nil, err
  438. }
  439. return result, nil
  440. }
  441. func (c *baseRPCClient) BroadcastEvidence(
  442. ctx context.Context,
  443. ev types.Evidence,
  444. ) (*coretypes.ResultBroadcastEvidence, error) {
  445. result := new(coretypes.ResultBroadcastEvidence)
  446. if err := c.caller.Call(ctx, "broadcast_evidence", evidenceArgs{
  447. Evidence: coretypes.Evidence{Value: ev},
  448. }, result); err != nil {
  449. return nil, err
  450. }
  451. return result, nil
  452. }