You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

370 lines
8.7 KiB

p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: file descriptor leaks (#3150) * close peer's connection to avoid fd leak Fixes #2967 * rename peer#Addr to RemoteAddr * fix test * fixes after Ethan's review * bring back the check * changelog entry * write a test for switch#acceptRoutine * increase timeouts? :( * remove extra assertNPeersWithTimeout * simplify test * assert number of peers (just to be safe) * Cleanup in OnStop * run tests with verbose flag on CircleCI * spawn a reading routine to prevent connection from closing * get port from the listener random port is faster, but often results in ``` panic: listen tcp 127.0.0.1:44068: bind: address already in use [recovered] panic: listen tcp 127.0.0.1:44068: bind: address already in use goroutine 79 [running]: testing.tRunner.func1(0xc0001bd600) /usr/local/go/src/testing/testing.go:792 +0x387 panic(0x974d20, 0xc0001b0500) /usr/local/go/src/runtime/panic.go:513 +0x1b9 github.com/tendermint/tendermint/p2p.MakeSwitch(0xc0000f42a0, 0x0, 0x9fb9cc, 0x9, 0x9fc346, 0xb, 0xb42128, 0x0, 0x0, 0x0, ...) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:182 +0xa28 github.com/tendermint/tendermint/p2p.MakeConnectedSwitches(0xc0000f42a0, 0x2, 0xb42128, 0xb41eb8, 0x4f1205, 0xc0001bed80, 0x4f16ed) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/test_util.go:75 +0xf9 github.com/tendermint/tendermint/p2p.MakeSwitchPair(0xbb8d20, 0xc0001bd600, 0xb42128, 0x2f7, 0x4f16c0) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:94 +0x4c github.com/tendermint/tendermint/p2p.TestSwitches(0xc0001bd600) /home/vagrant/go/src/github.com/tendermint/tendermint/p2p/switch_test.go:117 +0x58 testing.tRunner(0xc0001bd600, 0xb42038) /usr/local/go/src/testing/testing.go:827 +0xbf created by testing.(*T).Run /usr/local/go/src/testing/testing.go:878 +0x353 exit status 2 FAIL github.com/tendermint/tendermint/p2p 0.350s ```
6 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
p2p: implement new Transport interface (#5791) This implements a new `Transport` interface and related types for the P2P refactor in #5670. Previously, `conn.MConnection` was very tightly coupled to the `Peer` implementation -- in order to allow alternative non-multiplexed transports (e.g. QUIC), MConnection has now been moved below the `Transport` interface, as `MConnTransport`, and decoupled from the peer. Since the `p2p` package is not covered by our Go API stability, this is not considered a breaking change, and not listed in the changelog. The initial approach was to implement the new interface in its final form (which also involved possible protocol changes, see https://github.com/tendermint/spec/pull/227). However, it turned out that this would require a large amount of changes to existing P2P code because of the previous tight coupling between `Peer` and `MConnection` and the reliance on subtleties in the MConnection behavior. Instead, I have broadened the `Transport` interface to expose much of the existing MConnection interface, preserved much of the existing MConnection logic and behavior in the transport implementation, and tried to make as few changes to the rest of the P2P stack as possible. We will instead reduce this interface gradually as we refactor other parts of the P2P stack. The low-level transport code and protocol (e.g. MConnection, SecretConnection and so on) has not been significantly changed, and refactoring this is not a priority until we come up with a plan for QUIC adoption, as we may end up discarding the MConnection code entirely. There are no tests of the new `MConnTransport`, as this code is likely to evolve as we proceed with the P2P refactor, but tests should be added before a final release. The E2E tests are sufficient for basic validation in the meanwhile.
4 years ago
  1. package p2p
  2. import (
  3. "fmt"
  4. "io"
  5. "net"
  6. "runtime/debug"
  7. "time"
  8. "github.com/tendermint/tendermint/libs/cmap"
  9. "github.com/tendermint/tendermint/libs/log"
  10. "github.com/tendermint/tendermint/libs/service"
  11. tmconn "github.com/tendermint/tendermint/p2p/conn"
  12. )
  13. //go:generate mockery --case underscore --name Peer
  14. const metricsTickerDuration = 10 * time.Second
  15. // Peer is an interface representing a peer connected on a reactor.
  16. type Peer interface {
  17. service.Service
  18. FlushStop()
  19. ID() NodeID // peer's cryptographic ID
  20. RemoteIP() net.IP // remote IP of the connection
  21. RemoteAddr() net.Addr // remote address of the connection
  22. IsOutbound() bool // did we dial the peer
  23. IsPersistent() bool // do we redial this peer when we disconnect
  24. CloseConn() error // close original connection
  25. NodeInfo() NodeInfo // peer's info
  26. Status() tmconn.ConnectionStatus
  27. SocketAddr() *NetAddress // actual address of the socket
  28. Send(byte, []byte) bool
  29. TrySend(byte, []byte) bool
  30. Set(string, interface{})
  31. Get(string) interface{}
  32. }
  33. //----------------------------------------------------------
  34. // peerConn contains the raw connection and its config.
  35. type peerConn struct {
  36. outbound bool
  37. persistent bool
  38. conn Connection
  39. ip net.IP // cached RemoteIP()
  40. }
  41. func newPeerConn(outbound, persistent bool, conn Connection) peerConn {
  42. return peerConn{
  43. outbound: outbound,
  44. persistent: persistent,
  45. conn: conn,
  46. }
  47. }
  48. // Return the IP from the connection RemoteAddr
  49. func (pc peerConn) RemoteIP() net.IP {
  50. if pc.ip == nil {
  51. pc.ip = pc.conn.RemoteEndpoint().IP
  52. }
  53. return pc.ip
  54. }
  55. // peer implements Peer.
  56. //
  57. // Before using a peer, you will need to perform a handshake on connection.
  58. type peer struct {
  59. service.BaseService
  60. // raw peerConn and the multiplex connection
  61. peerConn
  62. // peer's node info and the channel it knows about
  63. // channels = nodeInfo.Channels
  64. // cached to avoid copying nodeInfo in hasChannel
  65. nodeInfo NodeInfo
  66. channels []byte
  67. reactors map[byte]Reactor
  68. onPeerError func(Peer, interface{})
  69. // User data
  70. Data *cmap.CMap
  71. metrics *Metrics
  72. metricsTicker *time.Ticker
  73. }
  74. type PeerOption func(*peer)
  75. func newPeer(
  76. nodeInfo NodeInfo,
  77. pc peerConn,
  78. reactorsByCh map[byte]Reactor,
  79. onPeerError func(Peer, interface{}),
  80. options ...PeerOption,
  81. ) *peer {
  82. p := &peer{
  83. peerConn: pc,
  84. nodeInfo: nodeInfo,
  85. channels: nodeInfo.Channels, // TODO
  86. reactors: reactorsByCh,
  87. onPeerError: onPeerError,
  88. Data: cmap.NewCMap(),
  89. metricsTicker: time.NewTicker(metricsTickerDuration),
  90. metrics: NopMetrics(),
  91. }
  92. p.BaseService = *service.NewBaseService(nil, "Peer", p)
  93. for _, option := range options {
  94. option(p)
  95. }
  96. return p
  97. }
  98. // onError calls the peer error callback.
  99. func (p *peer) onError(err interface{}) {
  100. p.onPeerError(p, err)
  101. }
  102. // String representation.
  103. func (p *peer) String() string {
  104. if p.outbound {
  105. return fmt.Sprintf("Peer{%v %v out}", p.conn, p.ID())
  106. }
  107. return fmt.Sprintf("Peer{%v %v in}", p.conn, p.ID())
  108. }
  109. //---------------------------------------------------
  110. // Implements service.Service
  111. // SetLogger implements BaseService.
  112. func (p *peer) SetLogger(l log.Logger) {
  113. p.Logger = l
  114. }
  115. // OnStart implements BaseService.
  116. func (p *peer) OnStart() error {
  117. if err := p.BaseService.OnStart(); err != nil {
  118. return err
  119. }
  120. go p.processMessages()
  121. go p.metricsReporter()
  122. return nil
  123. }
  124. // processMessages processes messages received from the connection.
  125. func (p *peer) processMessages() {
  126. defer func() {
  127. if r := recover(); r != nil {
  128. p.Logger.Error("peer message processing panic", "err", r, "stack", string(debug.Stack()))
  129. p.onError(fmt.Errorf("panic during peer message processing: %v", r))
  130. }
  131. }()
  132. for {
  133. chID, msg, err := p.conn.ReceiveMessage()
  134. if err != nil {
  135. p.onError(err)
  136. return
  137. }
  138. reactor, ok := p.reactors[byte(chID)]
  139. if !ok {
  140. p.onError(fmt.Errorf("unknown channel %v", chID))
  141. return
  142. }
  143. reactor.Receive(byte(chID), p, msg)
  144. }
  145. }
  146. // FlushStop mimics OnStop but additionally ensures that all successful
  147. // .Send() calls will get flushed before closing the connection.
  148. // NOTE: it is not safe to call this method more than once.
  149. func (p *peer) FlushStop() {
  150. p.metricsTicker.Stop()
  151. p.BaseService.OnStop()
  152. if err := p.conn.FlushClose(); err != nil {
  153. p.Logger.Debug("error while stopping peer", "err", err)
  154. }
  155. }
  156. // OnStop implements BaseService.
  157. func (p *peer) OnStop() {
  158. p.metricsTicker.Stop()
  159. p.BaseService.OnStop()
  160. if err := p.conn.Close(); err != nil {
  161. p.Logger.Debug("error while stopping peer", "err", err)
  162. }
  163. }
  164. //---------------------------------------------------
  165. // Implements Peer
  166. // ID returns the peer's ID - the hex encoded hash of its pubkey.
  167. func (p *peer) ID() NodeID {
  168. return p.nodeInfo.ID()
  169. }
  170. // IsOutbound returns true if the connection is outbound, false otherwise.
  171. func (p *peer) IsOutbound() bool {
  172. return p.peerConn.outbound
  173. }
  174. // IsPersistent returns true if the peer is persitent, false otherwise.
  175. func (p *peer) IsPersistent() bool {
  176. return p.peerConn.persistent
  177. }
  178. // NodeInfo returns a copy of the peer's NodeInfo.
  179. func (p *peer) NodeInfo() NodeInfo {
  180. return p.nodeInfo
  181. }
  182. // SocketAddr returns the address of the socket.
  183. // For outbound peers, it's the address dialed (after DNS resolution).
  184. // For inbound peers, it's the address returned by the underlying connection
  185. // (not what's reported in the peer's NodeInfo).
  186. func (p *peer) SocketAddr() *NetAddress {
  187. endpoint := p.peerConn.conn.RemoteEndpoint()
  188. return &NetAddress{
  189. ID: p.ID(),
  190. IP: endpoint.IP,
  191. Port: endpoint.Port,
  192. }
  193. }
  194. // Status returns the peer's ConnectionStatus.
  195. func (p *peer) Status() tmconn.ConnectionStatus {
  196. return p.conn.Status()
  197. }
  198. // Send msg bytes to the channel identified by chID byte. Returns false if the
  199. // send queue is full after timeout, specified by MConnection.
  200. func (p *peer) Send(chID byte, msgBytes []byte) bool {
  201. if !p.IsRunning() {
  202. // see Switch#Broadcast, where we fetch the list of peers and loop over
  203. // them - while we're looping, one peer may be removed and stopped.
  204. return false
  205. } else if !p.hasChannel(chID) {
  206. return false
  207. }
  208. res, err := p.conn.SendMessage(ChannelID(chID), msgBytes)
  209. if err == io.EOF {
  210. return false
  211. } else if err != nil {
  212. p.onError(err)
  213. return false
  214. }
  215. if res {
  216. labels := []string{
  217. "peer_id", string(p.ID()),
  218. "chID", fmt.Sprintf("%#x", chID),
  219. }
  220. p.metrics.PeerSendBytesTotal.With(labels...).Add(float64(len(msgBytes)))
  221. }
  222. return res
  223. }
  224. // TrySend msg bytes to the channel identified by chID byte. Immediately returns
  225. // false if the send queue is full.
  226. func (p *peer) TrySend(chID byte, msgBytes []byte) bool {
  227. if !p.IsRunning() {
  228. return false
  229. } else if !p.hasChannel(chID) {
  230. return false
  231. }
  232. res, err := p.conn.TrySendMessage(ChannelID(chID), msgBytes)
  233. if err == io.EOF {
  234. return false
  235. } else if err != nil {
  236. p.onError(err)
  237. return false
  238. }
  239. if res {
  240. labels := []string{
  241. "peer_id", string(p.ID()),
  242. "chID", fmt.Sprintf("%#x", chID),
  243. }
  244. p.metrics.PeerSendBytesTotal.With(labels...).Add(float64(len(msgBytes)))
  245. }
  246. return res
  247. }
  248. // Get the data for a given key.
  249. func (p *peer) Get(key string) interface{} {
  250. return p.Data.Get(key)
  251. }
  252. // Set sets the data for the given key.
  253. func (p *peer) Set(key string, data interface{}) {
  254. p.Data.Set(key, data)
  255. }
  256. // hasChannel returns true if the peer reported
  257. // knowing about the given chID.
  258. func (p *peer) hasChannel(chID byte) bool {
  259. for _, ch := range p.channels {
  260. if ch == chID {
  261. return true
  262. }
  263. }
  264. // NOTE: probably will want to remove this
  265. // but could be helpful while the feature is new
  266. p.Logger.Debug(
  267. "Unknown channel for peer",
  268. "channel",
  269. chID,
  270. "channels",
  271. p.channels,
  272. )
  273. return false
  274. }
  275. // CloseConn closes original connection. Used for cleaning up in cases where the peer had not been started at all.
  276. func (p *peer) CloseConn() error {
  277. return p.peerConn.conn.Close()
  278. }
  279. //---------------------------------------------------
  280. // methods only used for testing
  281. // TODO: can we remove these?
  282. // CloseConn closes the underlying connection
  283. func (pc *peerConn) CloseConn() {
  284. pc.conn.Close()
  285. }
  286. // RemoteAddr returns peer's remote network address.
  287. func (p *peer) RemoteAddr() net.Addr {
  288. endpoint := p.conn.RemoteEndpoint()
  289. return &net.TCPAddr{
  290. IP: endpoint.IP,
  291. Port: int(endpoint.Port),
  292. }
  293. }
  294. //---------------------------------------------------
  295. func PeerMetrics(metrics *Metrics) PeerOption {
  296. return func(p *peer) {
  297. p.metrics = metrics
  298. }
  299. }
  300. func (p *peer) metricsReporter() {
  301. for {
  302. select {
  303. case <-p.metricsTicker.C:
  304. status := p.conn.Status()
  305. var sendQueueSize float64
  306. for _, chStatus := range status.Channels {
  307. sendQueueSize += float64(chStatus.SendQueueSize)
  308. }
  309. p.metrics.PeerPendingSendBytes.With("peer_id", string(p.ID())).Set(sendQueueSize)
  310. case <-p.Quit():
  311. return
  312. }
  313. }
  314. }