tendermint/CHANGELOG.md

# Changelog

Friendly reminder: We have a [bug bounty program](https://hackerone.com/cosmos).

## v0.35.0

November 4, 2021

Special thanks to external contributors on this release: @JayT106,
@bipulprasad, @alessio, @Yawning, @silasdavis, @cuonglm, @tanyabouman,
@JoeKash, @githubsands, @jeebster, @crypto-facs, @liamsi, and @gotjoshua

### FEATURES

- [cli] [#7033](https://github.com/tendermint/tendermint/pull/7033) Add a `rollback` command to rollback to the previous tendermint state in the event of an incorrect app hash. (@cmwaters)
- [config] [\#7174](https://github.com/tendermint/tendermint/pull/7174) expose ability to write config to arbitrary paths. (@tychoish)
- [mempool, rpc] [\#7065](https://github.com/tendermint/tendermint/pull/7065) add removetx rpc method (backport of #7047) (@tychoish).
- [\#6982](https://github.com/tendermint/tendermint/pull/6982) tendermint binary has built-in suppport for running the e2e application (with state sync support) (@cmwaters).
- [config] Add `--mode` flag and config variable. See [ADR-52](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-052-tendermint-mode.md) @dongsam
- [rpc] [\#6329](https://github.com/tendermint/tendermint/pull/6329) Don't cap page size in unsafe mode (@gotjoshua, @cmwaters)
- [pex] [\#6305](https://github.com/tendermint/tendermint/pull/6305) v2 pex reactor with backwards compatability. Introduces two new pex messages to
  accomodate for the new p2p stack. Removes the notion of seeds and crawling. All peer
  exchange reactors behave the same. (@cmwaters)
- [crypto] [\#6376](https://github.com/tendermint/tendermint/pull/6376) Enable sr25519 as a validator key type
- [mempool] [\#6466](https://github.com/tendermint/tendermint/pull/6466) Introduction of a prioritized mempool. (@alexanderbez)
  - `Priority` and `Sender` have been introduced into the `ResponseCheckTx` type, where the `priority` will determine the prioritization of
  the transaction when a proposer reaps transactions for a block proposal. The `sender` field acts as an index.
  - Operators may toggle between the legacy mempool reactor, `v0`, and the new prioritized reactor, `v1`, by setting the
  `mempool.version` configuration, where `v1` is the default configuration.
  - Applications that do not specify a priority, i.e. zero, will have transactions reaped by the order in which they are received by the node.
  - Transactions are gossiped in FIFO order as they are in `v0`.
- [config/indexer] [\#6411](https://github.com/tendermint/tendermint/pull/6411) Introduce support for custom event indexing data sources, specifically PostgreSQL. (@JayT106)
- [blocksync/event] [\#6619](https://github.com/tendermint/tendermint/pull/6619) Emit blocksync status event when switching consensus/blocksync (@JayT106)
- [statesync/event] [\#6700](https://github.com/tendermint/tendermint/pull/6700) Emit statesync status start/end event (@JayT106)
- [inspect] [\#6785](https://github.com/tendermint/tendermint/pull/6785) Add a new `inspect` command for introspecting the state and block store of a crashed tendermint node. (@williambanfield)

### BUG FIXES

- [\#7106](https://github.com/tendermint/tendermint/pull/7106) Revert mutex change to ABCI Clients (@tychoish).
- [\#7142](https://github.com/tendermint/tendermint/pull/7142) mempool: remove panic when recheck-tx was not sent to ABCI application (@williambanfield).
- [consensus]: [\#7060](https://github.com/tendermint/tendermint/pull/7060)
  wait until peerUpdates channel is closed to close remaining peers (@williambanfield)
- [privval] [\#5638](https://github.com/tendermint/tendermint/pull/5638) Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
- [evidence] [\#6375](https://github.com/tendermint/tendermint/pull/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (cmwaters)
- [rpc] [\#6507](https://github.com/tendermint/tendermint/pull/6507) Ensure RPC client can handle URLs without ports (@JayT106)
- [statesync] [\#6463](https://github.com/tendermint/tendermint/pull/6463) Adds Reverse Sync feature to fetch historical light blocks after state sync in order to verify any evidence (@cmwaters)
- [blocksync] [\#6590](https://github.com/tendermint/tendermint/pull/6590) Update the metrics during blocksync (@JayT106)

### BREAKING CHANGES

- Go API

  - [crypto/armor]: [\#6963](https://github.com/tendermint/tendermint/pull/6963) remove package which is unused, and based on
    deprecated fundamentals. Downstream users should maintain this
    library. (@tychoish)
  - [state] [store] [proxy] [rpc/core]: [\#6937](https://github.com/tendermint/tendermint/pull/6937) move packages to
    `internal` to prevent consumption of these internal APIs by
    external users. (@tychoish)
  - [pubsub] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `Query#Matches` method along with other pubsub methods, now accepts a `[]abci.Event` instead of `map[string][]string`. (@alexanderbez)
  - [p2p] [\#6618](https://github.com/tendermint/tendermint/pull/6618) [\#6583](https://github.com/tendermint/tendermint/pull/6583) Move `p2p.NodeInfo`, `p2p.NodeID` and `p2p.NetAddress` into `types` to support use in external packages. (@tychoish)
  - [node] [\#6540](https://github.com/tendermint/tendermint/pull/6540) Reduce surface area of the `node` package by making most of the implementation details private. (@tychoish)
  - [p2p] [\#6547](https://github.com/tendermint/tendermint/pull/6547) Move the entire `p2p` package and all reactor implementations into `internal`.  (@tychoish)
  - [libs/log] [\#6534](https://github.com/tendermint/tendermint/pull/6534) Remove the existing custom Tendermint logger backed by go-kit. The logging interface, `Logger`, remains. Tendermint still provides a default logger backed by the performant zerolog logger. (@alexanderbez)
  - [libs/time] [\#6495](https://github.com/tendermint/tendermint/pull/6495) Move types/time to libs/time to improve consistency. (@tychoish)
  - [mempool] [\#6529](https://github.com/tendermint/tendermint/pull/6529) The `Context` field has been removed from the `TxInfo` type. `CheckTx` now requires a `Context` argument. (@alexanderbez)
  - [abci/client, proxy] [\#5673](https://github.com/tendermint/tendermint/pull/5673) `Async` funcs return an error, `Sync` and `Async` funcs accept `context.Context` (@melekes)
  - [p2p] Remove unused function `MakePoWTarget`. (@erikgrinaker)
  - [libs/bits] [\#5720](https://github.com/tendermint/tendermint/pull/5720) Validate `BitArray` in `FromProto`, which now returns an error (@melekes)
  - [proto/p2p] Rename `DefaultNodeInfo` and `DefaultNodeInfoOther` to `NodeInfo` and `NodeInfoOther` (@erikgrinaker)
  - [proto/p2p] Rename `NodeInfo.default_node_id` to `node_id` (@erikgrinaker)
  - [libs/os] Kill() and {Must,}{Read,Write}File() functions have been removed. (@alessio)
  - [store] [\#5848](https://github.com/tendermint/tendermint/pull/5848) Remove block store state in favor of using the db iterators directly (@cmwaters)
  - [state] [\#5864](https://github.com/tendermint/tendermint/pull/5864) Use an iterator when pruning state (@cmwaters)
  - [types] [\#6023](https://github.com/tendermint/tendermint/pull/6023) Remove `tm2pb.Header`, `tm2pb.BlockID`, `tm2pb.PartSetHeader` and `tm2pb.NewValidatorUpdate`.
	- Each of the above types has a `ToProto` and `FromProto` method or function which replaced this logic.
  - [light] [\#6054](https://github.com/tendermint/tendermint/pull/6054) Move `MaxRetryAttempt` option from client to provider.
	- `NewWithOptions` now sets the max retry attempts and timeouts (@cmwaters)
  - [all] [\#6077](https://github.com/tendermint/tendermint/pull/6077) Change spelling from British English to American (@cmwaters)
	- Rename "Subscription.Cancelled()" to "Subscription.Canceled()" in libs/pubsub
	- Rename "behaviour" pkg to "behavior" and internalized it in blocksync v2
  - [rpc/client/http] [\#6176](https://github.com/tendermint/tendermint/pull/6176) Remove `endpoint` arg from `New`, `NewWithTimeout` and `NewWithClient` (@melekes)
  - [rpc/client/http] [\#6176](https://github.com/tendermint/tendermint/pull/6176) Unexpose `WSEvents` (@melekes)
  - [rpc/jsonrpc/client/ws_client] [\#6176](https://github.com/tendermint/tendermint/pull/6176) `NewWS` no longer accepts options (use `NewWSWithOptions` and `OnReconnect` funcs to configure the client) (@melekes)
  - [internal/libs] [\#6366](https://github.com/tendermint/tendermint/pull/6366) Move `autofile`, `clist`,`fail`,`flowrate`, `protoio`, `sync`, `tempfile`, `test` and `timer` lib packages to an internal folder
  - [libs/rand] [\#6364](https://github.com/tendermint/tendermint/pull/6364) Remove most of libs/rand in favour of standard lib's `math/rand` (@liamsi)
  - [mempool] [\#6466](https://github.com/tendermint/tendermint/pull/6466) The original mempool reactor has been versioned as `v0` and moved to a sub-package under the root `mempool` package.
	Some core types have been kept in the `mempool` package such as `TxCache` and it's implementations, the `Mempool` interface itself
	and `TxInfo`. (@alexanderbez)
  - [crypto/sr25519] [\#6526](https://github.com/tendermint/tendermint/pull/6526) Do not re-execute the Ed25519-style key derivation step when doing signing and verification.  The derivation is now done once and only once.  This breaks `sr25519.GenPrivKeyFromSecret` output compatibility. (@Yawning)
  - [types] [\#6627](https://github.com/tendermint/tendermint/pull/6627) Move `NodeKey` to types to make the type public.
  - [config] [\#6627](https://github.com/tendermint/tendermint/pull/6627) Extend `config` to contain methods `LoadNodeKeyID` and `LoadorGenNodeKeyID`
  - [blocksync] [\#6755](https://github.com/tendermint/tendermint/pull/6755) Rename `FastSync` and `Blockchain` package to `BlockSync` (@cmwaters)

- CLI/RPC/Config

  - [pubsub/events] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `ResultEvent.Events` field is now of type `[]abci.Event` preserving event order instead of `map[string][]string`. (@alexanderbez)
  - [config] [\#5598](https://github.com/tendermint/tendermint/pull/5598) The `test_fuzz` and `test_fuzz_config` P2P settings have been removed. (@erikgrinaker)
  - [config] [\#5728](https://github.com/tendermint/tendermint/pull/5728) `fastsync.version = "v1"` is no longer supported (@melekes)
  - [cli] [\#5772](https://github.com/tendermint/tendermint/pull/5772) `gen_node_key` prints JSON-encoded `NodeKey` rather than ID and does not save it to `node_key.json` (@melekes)
  - [cli] [\#5777](https://github.com/tendermint/tendermint/pull/5777) use hyphen-case instead of snake_case for all cli commands and config parameters (@cmwaters)
  - [rpc] [\#6019](https://github.com/tendermint/tendermint/pull/6019) standardise RPC errors and return the correct status code (@bipulprasad & @cmwaters)
  - [rpc] [\#6168](https://github.com/tendermint/tendermint/pull/6168) Change default sorting to desc for `/tx_search` results (@melekes)
  - [cli] [\#6282](https://github.com/tendermint/tendermint/pull/6282) User must specify the node mode when using `tendermint init` (@cmwaters)
  - [state/indexer] [\#6382](https://github.com/tendermint/tendermint/pull/6382) reconstruct indexer, move txindex into the indexer package (@JayT106)
  - [cli] [\#6372](https://github.com/tendermint/tendermint/pull/6372) Introduce `BootstrapPeers` as part of the new p2p stack. Peers to be connected on  startup (@cmwaters)
  - [config] [\#6462](https://github.com/tendermint/tendermint/pull/6462) Move `PrivValidator` configuration out of `BaseConfig` into its own section. (@tychoish)
  - [rpc] [\#6610](https://github.com/tendermint/tendermint/pull/6610) Add MaxPeerBlockHeight into /status rpc call (@JayT106)
  - [blocksync/rpc] [\#6620](https://github.com/tendermint/tendermint/pull/6620) Add TotalSyncedTime & RemainingTime to SyncInfo in /status RPC  (@JayT106)
  - [rpc/grpc] [\#6725](https://github.com/tendermint/tendermint/pull/6725) Mark gRPC in the RPC layer as deprecated.
  - [blocksync/v2] [\#6730](https://github.com/tendermint/tendermint/pull/6730) Fast Sync v2 is deprecated, please use v0
  - [rpc] Add genesis_chunked method to support paginated and parallel fetching of large genesis documents.
  - [rpc/jsonrpc/server] [\#6785](https://github.com/tendermint/tendermint/pull/6785) `Listen` function updated to take an `int` argument, `maxOpenConnections`, instead of an entire config object. (@williambanfield)
  - [rpc] [\#6820](https://github.com/tendermint/tendermint/pull/6820) Update RPC methods to reflect changes in the p2p layer, disabling support for `UnsafeDialPeers` and `UnsafeDialPeers` when used with the new p2p layer, and changing the response format of the peer list in `NetInfo` for all users.
  - [cli] [\#6854](https://github.com/tendermint/tendermint/pull/6854) Remove deprecated snake case commands. (@tychoish)
  - [tools] [\#6498](https://github.com/tendermint/tendermint/pull/6498) Set OS home dir to instead of the hardcoded PATH. (@JayT106)
  - [cli/indexer] [\#6676](https://github.com/tendermint/tendermint/pull/6676) Reindex events command line tooling. (@JayT106)

- Apps

  - [ABCI] [\#6408](https://github.com/tendermint/tendermint/pull/6408) Change the `key` and `value` fields from `[]byte` to `string` in the `EventAttribute` type. (@alexanderbez)
  - [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Remove `SetOption` method from `ABCI.Client` interface
  - [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Reset `Oneof` indexes for  `Request` and `Response`.
  - [ABCI] [\#5818](https://github.com/tendermint/tendermint/pull/5818) Use protoio for msg length delimitation. Migrates from int64 to uint64 length delimiters.
  - [ABCI] [\#3546](https://github.com/tendermint/tendermint/pull/3546) Add `mempool_error` field to `ResponseCheckTx`. This field will contain an error string if Tendermint encountered an error while adding a transaction to the mempool. (@williambanfield)
  - [Version] [\#6494](https://github.com/tendermint/tendermint/pull/6494) `TMCoreSemVer` has been renamed to `TMVersion`.
	- It is not required any longer to set ldflags to set version strings
  - [abci/counter] [\#6684](https://github.com/tendermint/tendermint/pull/6684) Delete counter example app

- Data Storage
  - [store/state/evidence/light] [\#5771](https://github.com/tendermint/tendermint/pull/5771) Use an order-preserving varint key encoding (@cmwaters)
  - [mempool] [\#6396](https://github.com/tendermint/tendermint/pull/6396) Remove mempool's write ahead log (WAL), (previously unused by the tendermint code). (@tychoish)
  - [state] [\#6541](https://github.com/tendermint/tendermint/pull/6541) Move pruneBlocks from consensus/state to state/execution. (@JayT106)

### IMPROVEMENTS

- [libs/log] Console log formatting changes as a result of [\#6534](https://github.com/tendermint/tendermint/pull/6534) and [\#6589](https://github.com/tendermint/tendermint/pull/6589). (@tychoish)
- [statesync] [\#6566](https://github.com/tendermint/tendermint/pull/6566) Allow state sync fetchers and request timeout to be configurable. (@alexanderbez)
- [types] [\#6478](https://github.com/tendermint/tendermint/pull/6478) Add `block_id` to `newblock` event (@jeebster)
- [crypto/ed25519] [\#5632](https://github.com/tendermint/tendermint/pull/5632) Adopt zip215 `ed25519` verification. (@marbar3778)
- [crypto/ed25519] [\#6526](https://github.com/tendermint/tendermint/pull/6526) Use [curve25519-voi](https://github.com/oasisprotocol/curve25519-voi) for `ed25519` signing and verification. (@Yawning)
- [crypto/sr25519] [\#6526](https://github.com/tendermint/tendermint/pull/6526) Use [curve25519-voi](https://github.com/oasisprotocol/curve25519-voi) for `sr25519` signing and verification. (@Yawning)
- [privval] [\#5603](https://github.com/tendermint/tendermint/pull/5603) Add `--key` to `init`, `gen_validator`, `testnet` & `unsafe_reset_priv_validator` for use in generating `secp256k1` keys.
- [privval] [\#5725](https://github.com/tendermint/tendermint/pull/5725) Add gRPC support to private validator.
- [privval] [\#5876](https://github.com/tendermint/tendermint/pull/5876) `tendermint show-validator` will query the remote signer if gRPC is being used (@marbar3778)
- [abci/client] [\#5673](https://github.com/tendermint/tendermint/pull/5673) `Async` requests return an error if queue is full (@melekes)
- [mempool] [\#5673](https://github.com/tendermint/tendermint/pull/5673) Cancel `CheckTx` requests if RPC client disconnects or times out (@melekes)
- [abci] [\#5706](https://github.com/tendermint/tendermint/pull/5706) Added `AbciVersion` to `RequestInfo` allowing applications to check ABCI version when connecting to Tendermint. (@marbar3778)
- [blocksync/v1] [\#5728](https://github.com/tendermint/tendermint/pull/5728) Remove blocksync v1 (@melekes)
- [blocksync/v0] [\#5741](https://github.com/tendermint/tendermint/pull/5741) Relax termination conditions and increase sync timeout (@melekes)
- [cli] [\#5772](https://github.com/tendermint/tendermint/pull/5772) `gen_node_key` output now contains node ID (`id` field) (@melekes)
- [blocksync/v2] [\#5774](https://github.com/tendermint/tendermint/pull/5774) Send status request when new peer joins (@melekes)
- [store] [\#5888](https://github.com/tendermint/tendermint/pull/5888) store.SaveBlock saves using batches instead of transactions for now to improve ACID properties. This is a quick fix for underlying issues around tm-db and ACID guarantees. (@githubsands)
- [consensus] [\#5987](https://github.com/tendermint/tendermint/pull/5987) and [\#5792](https://github.com/tendermint/tendermint/pull/5792) Remove the `time_iota_ms` consensus parameter. Merge `tmproto.ConsensusParams` and `abci.ConsensusParams`. (@marbar3778, @valardragon)
- [types] [\#5994](https://github.com/tendermint/tendermint/pull/5994) Reduce the use of protobuf types in core logic. (@marbar3778)
  - `ConsensusParams`, `BlockParams`, `ValidatorParams`, `EvidenceParams`, `VersionParams`, `sm.Version` and `version.Consensus` have become native types. They still utilize protobuf when being sent over the wire or written to disk.
- [rpc/client/http] [\#6163](https://github.com/tendermint/tendermint/pull/6163) Do not drop events even if the `out` channel is full (@melekes)
- [node] [\#6059](https://github.com/tendermint/tendermint/pull/6059) Validate and complete genesis doc before saving to state store (@silasdavis)
- [state] [\#6067](https://github.com/tendermint/tendermint/pull/6067) Batch save state data (@githubsands & @cmwaters)
- [crypto] [\#6120](https://github.com/tendermint/tendermint/pull/6120) Implement batch verification interface for ed25519 and sr25519. (@marbar3778)
- [types] [\#6120](https://github.com/tendermint/tendermint/pull/6120) use batch verification for verifying commits signatures.
  - If the key type supports the batch verification API it will try to batch verify. If the verification fails we will single verify each signature.
- [privval/file] [\#6185](https://github.com/tendermint/tendermint/pull/6185) Return error on `LoadFilePV`, `LoadFilePVEmptyState`. Allows for better programmatic control of Tendermint.
- [privval] [\#6240](https://github.com/tendermint/tendermint/pull/6240) Add `context.Context` to privval interface.
- [rpc] [\#6265](https://github.com/tendermint/tendermint/pull/6265) set cache control in http-rpc response header (@JayT106)
- [statesync] [\#6378](https://github.com/tendermint/tendermint/pull/6378) Retry requests for snapshots and add a minimum discovery time (5s) for new snapshots.
- [node/state] [\#6370](https://github.com/tendermint/tendermint/pull/6370) graceful shutdown in the consensus reactor (@JayT106)
- [crypto/merkle] [\#6443](https://github.com/tendermint/tendermint/pull/6443) Improve HashAlternatives performance (@cuonglm)
- [crypto/merkle] [\#6513](https://github.com/tendermint/tendermint/pull/6513) Optimize HashAlternatives (@marbar3778)
- [p2p/pex] [\#6509](https://github.com/tendermint/tendermint/pull/6509) Improve addrBook.hash performance (@cuonglm)
- [consensus/metrics] [\#6549](https://github.com/tendermint/tendermint/pull/6549) Change block_size gauge to a histogram for better observability over time (@marbar3778)
- [statesync] [\#6587](https://github.com/tendermint/tendermint/pull/6587) Increase chunk priority and re-request chunks that don't arrive (@cmwaters)
- [state/privval] [\#6578](https://github.com/tendermint/tendermint/pull/6578) No GetPubKey retry beyond the proposal/voting window (@JayT106)
- [rpc] [\#6615](https://github.com/tendermint/tendermint/pull/6615) Add TotalGasUsed to block_results response (@crypto-facs)
- [cmd/tendermint/commands] [\#6623](https://github.com/tendermint/tendermint/pull/6623) replace `$HOME/.some/test/dir` with `t.TempDir` (@tanyabouman)
- [statesync] \6807 Implement P2P state provider as an alternative to RPC (@cmwaters)

## v0.34.13

*September 6, 2021*

This release backports improvements to state synchronization and ABCI
performance under concurrent load, and the PostgreSQL event indexer.

### IMPROVEMENTS

- [statesync] [\#6881](https://github.com/tendermint/tendermint/issues/6881) improvements to stateprovider logic (@cmwaters)
- [ABCI] [\#6873](https://github.com/tendermint/tendermint/issues/6873) change client to use multi-reader mutexes (@tychoish)
- [indexing] [\#6906](https://github.com/tendermint/tendermint/issues/6906) enable the PostgreSQL indexer sink (@creachadair)

## v0.34.12

*August 17, 2021*

Special thanks to external contributors on this release: @JayT106.

### FEATURES

- [rpc] [\#6717](https://github.com/tendermint/tendermint/pull/6717) introduce
  `/genesis_chunked` rpc endpoint for handling large genesis files by chunking them (@tychoish)

### IMPROVEMENTS

- [rpc] [\#6825](https://github.com/tendermint/tendermint/issues/6825) Remove egregious INFO log from `ABCI#Query` RPC. (@alexanderbez)

### BUG FIXES

- [light] [\#6685](https://github.com/tendermint/tendermint/pull/6685) fix bug
  with incorrectly handling contexts that would occasionally freeze state sync. (@cmwaters)
- [privval] [\#6748](https://github.com/tendermint/tendermint/issues/6748) Fix vote timestamp to prevent chain halt (@JayT106)

## v0.34.11

*June 18, 2021*

This release improves the robustness of statesync; tweaking channel priorities and timeouts and
adding two new parameters to the state sync config.

### BREAKING CHANGES

- Apps
    - [Version] [\#6494](https://github.com/tendermint/tendermint/pull/6494) `TMCoreSemVer` is not required to be set as a ldflag any longer.

### IMPROVEMENTS

- [statesync] [\#6566](https://github.com/tendermint/tendermint/pull/6566) Allow state sync fetchers and request timeout to be configurable. (@alexanderbez)
- [statesync] [\#6378](https://github.com/tendermint/tendermint/pull/6378) Retry requests for snapshots and add a minimum discovery time (5s) for new snapshots. (@tychoish)
- [statesync] [\#6582](https://github.com/tendermint/tendermint/pull/6582) Increase chunk priority and add multiple retry chunk requests (@cmwaters)

### BUG FIXES

- [evidence] [\#6375](https://github.com/tendermint/tendermint/pull/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (@cmwaters)

## v0.34.10

*April 14, 2021*

This release fixes a bug where peers would sometimes try to send messages
on incorrect channels. Special thanks to our friends at Oasis Labs for surfacing
this issue!

- [p2p/node] [\#6339](https://github.com/tendermint/tendermint/issues/6339) Fix bug with using custom channels (@cmwaters)
- [light] [\#6346](https://github.com/tendermint/tendermint/issues/6346) Correctly handle too high errors to improve client robustness (@cmwaters)

## v0.34.9

*April 8, 2021*

This release fixes a moderate severity security issue, Security Advisory Alderfly,
which impacts all networks that rely on Tendermint light clients.
Further details will be released once networks have upgraded.

This release also includes a small Go API-breaking change, to reduce panics in the RPC layer.

Special thanks to our external contributors on this release: @gchaincl

### BREAKING CHANGES

- Go API
    - [rpc/jsonrpc/server] [\#6204](https://github.com/tendermint/tendermint/issues/6204) Modify `WriteRPCResponseHTTP(Error)` to return an error (@melekes)

### FEATURES

- [rpc] [\#6226](https://github.com/tendermint/tendermint/issues/6226) Index block events and expose a new RPC method, `/block_search`, to allow querying for blocks by `BeginBlock` and `EndBlock` events (@alexanderbez)

### BUG FIXES

- [rpc/jsonrpc/server] [\#6191](https://github.com/tendermint/tendermint/issues/6191) Correctly unmarshal `RPCRequest` when data is `null` (@melekes)
- [p2p] [\#6289](https://github.com/tendermint/tendermint/issues/6289) Fix "unknown channels" bug on CustomReactors (@gchaincl)
- [light/evidence] Adds logic to handle forward lunatic attacks (@cmwaters)

## v0.34.8

*February 25, 2021*

This release, in conjunction with [a fix in the Cosmos SDK](https://github.com/cosmos/cosmos-sdk/pull/8641),
introduces changes that should mean the logs are much, much quieter. 🎉

### IMPROVEMENTS

- [libs/log] [\#6174](https://github.com/tendermint/tendermint/issues/6174) Include timestamp (`ts` field; `time.RFC3339Nano` format) in JSON logger output (@melekes)

### BUG FIXES

- [abci] [\#6124](https://github.com/tendermint/tendermint/issues/6124) Fixes a panic condition during callback execution in `ReCheckTx` during high tx load. (@alexanderbez)

## v0.34.7

*February 18, 2021*

This release fixes a downstream security issue which impacts Cosmos SDK
users who are:

* Using Cosmos SDK v0.40.0 or later, AND
* Running validator nodes, AND
* Using the file-based `FilePV` implementation for their consensus keys

Users who fulfill all the above criteria were susceptible to leaking
private key material in the logs. All other users are unaffected.

The root cause was a discrepancy
between the Tendermint Core (untyped) logger and the Cosmos SDK (typed) logger:
Tendermint Core's logger automatically stringifies Go interfaces whenever possible;
however, the Cosmos SDK's logger uses reflection to log the fields within a Go interface.

The introduction of the typed logger meant that previously un-logged fields within
interfaces are now sometimes logged, including the private key material inside the
`FilePV` struct.

Tendermint Core v0.34.7 fixes this issue; however, we strongly recommend that all validators
use remote signer implementations instead of `FilePV` in production.

Thank you to @joe-bowman for his assistance with this vulnerability and a particular
shout-out to @marbar3778 for diagnosing it quickly.

### BUG FIXES

- [consensus] [\#6128](https://github.com/tendermint/tendermint/pull/6128) Remove privValidator from log call (@tessr)

## v0.34.6

*February 18, 2021*

_Tendermint Core v0.34.5 and v0.34.6 have been recalled due to release tooling problems._

## v0.34.4

*February 11, 2021*

This release includes a fix for a memory leak in the evidence reactor (see #6068, below).
All Tendermint clients are recommended to upgrade.
Thank you to our friends at Crypto.com for the initial report of this memory leak!

Special thanks to other external contributors on this release: @yayajacky, @odidev, @laniehei, and @c29r3!

### BUG FIXES

- [light] [\#6022](https://github.com/tendermint/tendermint/pull/6022) Fix a bug when the number of validators equals 100 (@melekes)
- [light] [\#6026](https://github.com/tendermint/tendermint/pull/6026) Fix a bug when height isn't provided for the rpc calls: `/commit` and `/validators` (@cmwaters)
- [evidence] [\#6068](https://github.com/tendermint/tendermint/pull/6068) Terminate broadcastEvidenceRoutine when peer is stopped (@melekes)

## v0.34.3

*January 19, 2021*

This release includes a fix for a high-severity security vulnerability,
a DoS-vector that impacted Tendermint Core v0.34.0-v0.34.2. For more details, see
[Security Advisory Mulberry](https://github.com/tendermint/tendermint/security/advisories/GHSA-p658-8693-mhvg)
or https://nvd.nist.gov/vuln/detail/CVE-2021-21271.

Tendermint Core v0.34.3 also updates GoGo Protobuf to 1.3.2 in order to pick up the fix for
https://nvd.nist.gov/vuln/detail/CVE-2021-3121.

### BUG FIXES

- [evidence] [[security fix]](https://github.com/tendermint/tendermint/security/advisories/GHSA-p658-8693-mhvg) Use correct source of evidence time (@cmwaters)
- [proto] [\#5886](https://github.com/tendermint/tendermint/pull/5889) Bump gogoproto to 1.3.2 (@marbar3778)

## v0.34.2

*January 12, 2021*

This release fixes a substantial bug in evidence handling where evidence could
sometimes be broadcast before the block containing that evidence was fully committed,
resulting in some nodes panicking when trying to verify said evidence.

### BREAKING CHANGES

- Go API
  - [libs/os] [\#5871](https://github.com/tendermint/tendermint/issues/5871) `EnsureDir` now propagates IO errors and checks the file type (@erikgrinaker)

### BUG FIXES

- [evidence] [\#5890](https://github.com/tendermint/tendermint/pull/5890) Add a buffer to evidence from consensus to avoid broadcasting and proposing evidence before the
  height of such an evidence has finished (@cmwaters)
- [statesync] [\#5889](https://github.com/tendermint/tendermint/issues/5889) Set `LastHeightConsensusParamsChanged` when bootstrapping Tendermint state (@cmwaters)

## v0.34.1

*January 6, 2021*

Special thanks to external contributors on this release:

@p4u from vocdoni.io reported that the mempool might behave incorrectly under a
high load. The consequences can range from pauses between blocks to the peers
disconnecting from this node. As a temporary remedy (until the mempool package
is refactored), the `max-batch-bytes` was disabled. Transactions will be sent
one by one without batching.

### BREAKING CHANGES

- CLI/RPC/Config
  - [cli] [\#5786](https://github.com/tendermint/tendermint/issues/5786) deprecate snake_case commands for hyphen-case (@cmwaters)

- Go API
  - [libs/protoio] [\#5868](https://github.com/tendermint/tendermint/issues/5868) Return number of bytes read in `Reader.ReadMsg()` (@erikgrinaker)

### IMPROVEMENTS

- [mempool] [\#5813](https://github.com/tendermint/tendermint/issues/5813) Add `keep-invalid-txs-in-cache` config option. When set to true, mempool will keep invalid transactions in the cache (@p4u)

### BUG FIXES

- [crypto] [\#5707](https://github.com/tendermint/tendermint/issues/5707) Fix infinite recursion in string formatting of Secp256k1 keys (@erikgrinaker)
- [mempool] [\#5800](https://github.com/tendermint/tendermint/issues/5800) Disable `max-batch-bytes` (@melekes)
- [p2p] [\#5868](https://github.com/tendermint/tendermint/issues/5868) Fix inbound traffic statistics and rate limiting in `MConnection` (@erikgrinaker)

## v0.34.0

*November 19, 2020*

Holy smokes, this is a big one! For a more reader-friendly overview of the changes in 0.34.0
(and of the changes you need to accommodate as a user), check out [UPGRADING.md](UPGRADING.md).

Special thanks to external contributors on this release: @james-ray, @fedekunze, @favadi, @alessio,
@joe-bowman, @cuonglm, @SadPencil and @dongsam.

### BREAKING CHANGES

- CLI/RPC/Config

   - [config] [\#5315](https://github.com/tendermint/tendermint/pull/5315) Rename `prof_laddr` to `pprof_laddr` and move it to `rpc` section (@melekes)
  - [evidence] [\#4959](https://github.com/tendermint/tendermint/pull/4959) Add JSON tags to `DuplicateVoteEvidence` (@marbar3778)
  - [light] [\#4946](https://github.com/tendermint/tendermint/pull/4946) `tendermint lite` command has been renamed to `tendermint light` (@marbar3778)
  - [privval] [\#4582](https://github.com/tendermint/tendermint/pull/4582) `round` in private_validator_state.json is no longer JSON string; instead it is a number (@marbar3778)
  - [rpc] [\#4792](https://github.com/tendermint/tendermint/pull/4792) `/validators` are now sorted by voting power (@melekes)
  - [rpc] [\#4947](https://github.com/tendermint/tendermint/pull/4947) Return an error when `page` pagination param is 0 in `/validators`, `tx_search` (@melekes)
  - [rpc] [\#5137](https://github.com/tendermint/tendermint/pull/5137) JSON tags of `gasWanted` and `gasUsed` in `ResponseCheckTx` and `ResponseDeliverTx` have been made snake_case (`gas_wanted` and `gas_used`) (@marbar3778)
  - [rpc] [\#5315](https://github.com/tendermint/tendermint/pull/5315) Remove `/unsafe_start_cpu_profiler`, `/unsafe_stop_cpu_profiler` and `/unsafe_write_heap_profile`. Please use pprof functionality instead (@melekes)
  - [rpc/client, rpc/jsonrpc/client] [\#5347](https://github.com/tendermint/tendermint/pull/5347) All client methods now accept `context.Context` as 1st param (@melekes)

- Apps

  - [abci] [\#4704](https://github.com/tendermint/tendermint/pull/4704) Add ABCI methods `ListSnapshots`, `LoadSnapshotChunk`, `OfferSnapshot`, and `ApplySnapshotChunk` for state sync snapshots. `ABCIVersion` bumped to 0.17.0. (@erikgrinaker)
  - [abci] [\#4989](https://github.com/tendermint/tendermint/pull/4989) `Proof` within `ResponseQuery` has been renamed to `ProofOps`  (@marbar3778)
  - [abci] [\#5096](https://github.com/tendermint/tendermint/pull/5096) `CheckTxType` Protobuf enum names are now uppercase, to follow Protobuf style guide (@erikgrinaker)
  - [abci] [\#5324](https://github.com/tendermint/tendermint/pull/5324) ABCI evidence type is now an enum with two types of possible evidence (@cmwaters)

- P2P Protocol

  - [blockchain] [\#4637](https://github.com/tendermint/tendermint/pull/4637) Migrate blockchain reactor(s) to Protobuf encoding (@marbar3778)
  - [evidence] [\#4949](https://github.com/tendermint/tendermint/pull/4949) Migrate evidence reactor to Protobuf encoding (@marbar3778)
  - [mempool] [\#4940](https://github.com/tendermint/tendermint/pull/4940) Migrate mempool from to Protobuf encoding (@marbar3778)
  - [mempool] [\#5321](https://github.com/tendermint/tendermint/pull/5321) Batch transactions when broadcasting them to peers (@melekes)
     - `MaxBatchBytes` new config setting defines the max size of one batch.
  - [p2p/pex] [\#4973](https://github.com/tendermint/tendermint/pull/4973) Migrate `p2p/pex` reactor to Protobuf encoding (@marbar3778)
  - [statesync] [\#4943](https://github.com/tendermint/tendermint/pull/4943) Migrate state sync reactor to Protobuf encoding (@marbar3778)

- Blockchain Protocol

  - [evidence] [\#4725](https://github.com/tendermint/tendermint/pull/4725) Remove `Pubkey` from `DuplicateVoteEvidence` (@marbar3778)
  - [evidence] [\#5499](https://github.com/tendermint/tendermint/pull/5449) Cap evidence to a maximum number of bytes (supercedes [\#4780](https://github.com/tendermint/tendermint/pull/4780)) (@cmwaters)
  - [merkle] [\#5193](https://github.com/tendermint/tendermint/pull/5193) Header hashes are no longer empty for empty inputs, notably `DataHash`, `EvidenceHash`, and `LastResultsHash` (@erikgrinaker)
  - [state] [\#4845](https://github.com/tendermint/tendermint/pull/4845) Include `GasWanted` and `GasUsed` into `LastResultsHash` (@melekes)
  - [types] [\#4792](https://github.com/tendermint/tendermint/pull/4792) Sort validators by voting power to enable faster commit verification (@melekes)

- On-disk serialization

  - [state] [\#4679](https://github.com/tendermint/tendermint/pull/4679) Migrate state module to Protobuf encoding (@marbar3778)
    - `BlockStoreStateJSON` is now `BlockStoreState` and is encoded as binary in the database
  - [store] [\#4778](https://github.com/tendermint/tendermint/pull/4778) Migrate store module to Protobuf encoding (@marbar3778)

- Light client, private validator

  - [light] [\#4964](https://github.com/tendermint/tendermint/pull/4964) Migrate light module migration to Protobuf encoding (@marbar3778)
  - [privval] [\#4985](https://github.com/tendermint/tendermint/pull/4985) Migrate `privval` module to Protobuf encoding (@marbar3778)

- Go API

  - [consensus] [\#4582](https://github.com/tendermint/tendermint/pull/4582) RoundState: `Round`, `LockedRound` & `CommitRound` are now `int32` (@marbar3778)
  - [consensus] [\#4582](https://github.com/tendermint/tendermint/pull/4582) HeightVoteSet: `round` is now `int32` (@marbar3778)
  - [crypto] [\#4721](https://github.com/tendermint/tendermint/pull/4721) Remove `SimpleHashFromMap()` and `SimpleProofsFromMap()` (@erikgrinaker)
  - [crypto] [\#4940](https://github.com/tendermint/tendermint/pull/4940) All keys have become `[]byte` instead of `[<size>]byte`. The byte method no longer returns the marshaled value but just the `[]byte` form of the data. (@marbar3778)
  - [crypto] [\#4988](https://github.com/tendermint/tendermint/pull/4988) Removal of key type multisig (@marbar3778)
    - The key has been moved to the [Cosmos-SDK](https://github.com/cosmos/cosmos-sdk/blob/master/crypto/types/multisig/multisignature.go)
  - [crypto] [\#4989](https://github.com/tendermint/tendermint/pull/4989) Remove `Simple` prefixes from `SimpleProof`, `SimpleValueOp` & `SimpleProofNode`. (@marbar3778)
    - `merkle.Proof` has been renamed to `ProofOps`.
    - Protobuf messages `Proof` & `ProofOp` has been moved to `proto/crypto/merkle`
    - `SimpleHashFromByteSlices` has been renamed to `HashFromByteSlices`
    - `SimpleHashFromByteSlicesIterative` has been renamed to `HashFromByteSlicesIterative`
    - `SimpleProofsFromByteSlices` has been renamed to `ProofsFromByteSlices`
  - [crypto] [\#4941](https://github.com/tendermint/tendermint/pull/4941) Remove suffixes from all keys. (@marbar3778)
    - ed25519: type `PrivKeyEd25519` is now `PrivKey`
    - ed25519: type `PubKeyEd25519` is now `PubKey`
    - secp256k1: type`PrivKeySecp256k1` is now `PrivKey`
    - secp256k1: type`PubKeySecp256k1` is now `PubKey`
    - sr25519: type `PrivKeySr25519` is now `PrivKey`
    - sr25519: type `PubKeySr25519` is now `PubKey`
  - [crypto] [\#5214](https://github.com/tendermint/tendermint/pull/5214) Change `GenPrivKeySecp256k1` to `GenPrivKeyFromSecret` to be consistent with other keys (@marbar3778)
  - [crypto] [\#5236](https://github.com/tendermint/tendermint/pull/5236) `VerifyBytes` is now `VerifySignature` on the `crypto.PubKey` interface (@marbar3778)
  - [evidence] [\#5361](https://github.com/tendermint/tendermint/pull/5361) Add LightClientAttackEvidence and change evidence interface (@cmwaters)
  - [libs] [\#4831](https://github.com/tendermint/tendermint/pull/4831) Remove `Bech32` pkg from Tendermint. This pkg now lives in the [cosmos-sdk](https://github.com/cosmos/cosmos-sdk/tree/4173ea5ebad906dd9b45325bed69b9c655504867/types/bech32) (@marbar3778)
  - [light] [\#4946](https://github.com/tendermint/tendermint/pull/4946) Rename `lite2` pkg to `light`. Remove `lite` implementation. (@marbar3778)
  - [light] [\#5347](https://github.com/tendermint/tendermint/pull/5347) `NewClient`, `NewHTTPClient`, `VerifyHeader` and `VerifyLightBlockAtHeight` now accept `context.Context` as 1st param (@melekes)
  - [merkle] [\#5193](https://github.com/tendermint/tendermint/pull/5193) `HashFromByteSlices` and `ProofsFromByteSlices` now return a hash for empty inputs, following RFC6962 (@erikgrinaker)
  - [proto] [\#5025](https://github.com/tendermint/tendermint/pull/5025) All proto files have been moved to `/proto` directory. (@marbar3778)
    - Using the recommended the file layout from buf, [see here for more info](https://buf.build/docs/lint-checkers#file_layout)
  - [rpc/client] [\#4947](https://github.com/tendermint/tendermint/pull/4947) `Validators`, `TxSearch` `page`/`per_page` params become pointers (@melekes)
    - `UnconfirmedTxs` `limit` param is a pointer
  - [rpc/jsonrpc/server] [\#5141](https://github.com/tendermint/tendermint/pull/5141) Remove `WriteRPCResponseArrayHTTP` (use `WriteRPCResponseHTTP` instead) (@melekes)
  - [state] [\#4679](https://github.com/tendermint/tendermint/pull/4679) `TxResult` is a Protobuf type defined in `abci` types directory (@marbar3778)
  - [state] [\#5191](https://github.com/tendermint/tendermint/pull/5191) Add `State.InitialHeight` field to record initial block height, must be `1` (not `0`) to start from 1 (@erikgrinaker)
  - [state] [\#5231](https://github.com/tendermint/tendermint/pull/5231) `LoadStateFromDBOrGenesisFile()` and `LoadStateFromDBOrGenesisDoc()` no longer saves the state in the database if not found, the genesis state is simply returned (@erikgrinaker)
  - [state] [\#5348](https://github.com/tendermint/tendermint/pull/5348) Define an Interface for the state store. (@marbar3778)
  - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939)  `SignedMsgType` has moved to a Protobuf enum types (@marbar3778)
  - [types] [\#4962](https://github.com/tendermint/tendermint/pull/4962) `ConsensusParams`, `BlockParams`, `EvidenceParams`, `ValidatorParams` & `HashedParams` are now Protobuf types (@marbar3778)
  - [types] [\#4852](https://github.com/tendermint/tendermint/pull/4852) Vote & Proposal `SignBytes` is now func `VoteSignBytes` & `ProposalSignBytes` (@marbar3778)
  - [types] [\#4798](https://github.com/tendermint/tendermint/pull/4798) Simplify `VerifyCommitTrusting` func + remove extra validation (@melekes)
  - [types] [\#4845](https://github.com/tendermint/tendermint/pull/4845) Remove `ABCIResult` (@melekes)
  - [types] [\#5029](https://github.com/tendermint/tendermint/pull/5029) Rename all values from `PartsHeader` to `PartSetHeader` to have consistency (@marbar3778)
  - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) `Total` in `Parts` & `PartSetHeader` has been changed from a `int` to a `uint32` (@marbar3778)
  - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Vote: `ValidatorIndex` & `Round` are now `int32` (@marbar3778)
  - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Proposal: `POLRound` & `Round` are now `int32` (@marbar3778)
  - [types] [\#4939](https://github.com/tendermint/tendermint/pull/4939) Block: `Round` is now `int32` (@marbar3778)

### FEATURES

- [abci] [\#5031](https://github.com/tendermint/tendermint/pull/5031) Add `AppVersion` to consensus parameters (@james-ray)
  - This makes it possible to update your ABCI application version via `EndBlock` response
- [abci] [\#5174](https://github.com/tendermint/tendermint/pull/5174) Remove `MockEvidence` in favor of testing with actual evidence types (`DuplicateVoteEvidence` & `LightClientAttackEvidence`) (@cmwaters)
- [abci] [\#5191](https://github.com/tendermint/tendermint/pull/5191) Add `InitChain.InitialHeight` field giving the initial block height (@erikgrinaker)
- [abci] [\#5227](https://github.com/tendermint/tendermint/pull/5227) Add `ResponseInitChain.app_hash` which is recorded in genesis block (@erikgrinaker)
- [config] [\#5147](https://github.com/tendermint/tendermint/pull/5147) Add `--consensus.double_sign_check_height` flag and `DoubleSignCheckHeight` config variable. See [ADR-51](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-051-double-signing-risk-reduction.md) (@dongsam)
- [db] [\#5233](https://github.com/tendermint/tendermint/pull/5233) Add support for `badgerdb` database backend (@erikgrinaker)
- [evidence] [\#4532](https://github.com/tendermint/tendermint/pull/4532) Handle evidence from light clients (@melekes)
- [evidence] [#4821](https://github.com/tendermint/tendermint/pull/4821) Amnesia (light client attack) evidence can be detected, verified and committed (@cmwaters)
- [genesis] [\#5191](https://github.com/tendermint/tendermint/pull/5191) Add `initial_height` field to specify the initial chain height (defaults to `1`) (@erikgrinaker)
- [libs/math] [\#5665](https://github.com/tendermint/tendermint/pull/5665) Make fractions unsigned integers (uint64) (@cmwaters)
- [light] [\#5298](https://github.com/tendermint/tendermint/pull/5298) Morph validator set and signed header into light block (@cmwaters)
- [p2p] [\#4981](https://github.com/tendermint/tendermint/pull/4981) Expose `SaveAs` func on NodeKey (@melekes)
- [privval] [\#5239](https://github.com/tendermint/tendermint/pull/5239) Add `chainID` to requests from client. (@marbar3778)
- [rpc] [\#4532](https://github.com/tendermint/tendermint/pull/4923) Support `BlockByHash` query (@fedekunze)
- [rpc] [\#4979](https://github.com/tendermint/tendermint/pull/4979) Support EXISTS operator in `/tx_search` query (@melekes)
- [rpc] [\#5017](https://github.com/tendermint/tendermint/pull/5017) Add `/check_tx` endpoint to check transactions without executing them or adding them to the mempool (@melekes)
- [rpc] [\#5108](https://github.com/tendermint/tendermint/pull/5108) Subscribe using the websocket for new evidence events (@cmwaters)
- [statesync] Add state sync support, where a new node can be rapidly bootstrapped by fetching state snapshots from peers instead of replaying blocks. See the `[statesync]` config section.
- [evidence] [\#5361](https://github.com/tendermint/tendermint/pull/5361) Add LightClientAttackEvidence and refactor evidence lifecycle - for more information see [ADR-059](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-059-evidence-composition-and-lifecycle.md) (@cmwaters)

### IMPROVEMENTS

- [blockchain] [\#5278](https://github.com/tendermint/tendermint/pull/5278) Verify only +2/3 of the signatures in a block when fast syncing. (@marbar3778)
- [consensus] [\#4578](https://github.com/tendermint/tendermint/pull/4578) Attempt to repair the consensus WAL file (`data/cs.wal/wal`) automatically in case of corruption (@alessio)
  - The original WAL file will be backed up to `data/cs.wal/wal.CORRUPTED`.
- [consensus] [\#5143](https://github.com/tendermint/tendermint/pull/5143) Only call `privValidator.GetPubKey` once per block (@melekes)
- [evidence] [\#4722](https://github.com/tendermint/tendermint/pull/4722) Consolidate evidence store and pool types to improve evidence DB (@cmwaters)
- [evidence] [\#4839](https://github.com/tendermint/tendermint/pull/4839) Reject duplicate evidence from being proposed (@cmwaters)
- [evidence] [\#5219](https://github.com/tendermint/tendermint/pull/5219) Change the source of evidence time to block time (@cmwaters)
- [libs] [\#5126](https://github.com/tendermint/tendermint/pull/5126) Add a sync package which wraps sync.(RW)Mutex & deadlock.(RW)Mutex and use a build flag (deadlock) in order to enable deadlock checking (@marbar3778)
- [light] [\#4935](https://github.com/tendermint/tendermint/pull/4935) Fetch and compare a new header with witnesses in parallel (@melekes)
- [light] [\#4929](https://github.com/tendermint/tendermint/pull/4929) Compare header with witnesses only when doing bisection (@melekes)
- [light] [\#4916](https://github.com/tendermint/tendermint/pull/4916) Validate basic for inbound validator sets and headers before further processing them (@cmwaters)
- [mempool] Add RemoveTxByKey() exported function for custom mempool cleaning (@p4u)
- [p2p/conn] [\#4795](https://github.com/tendermint/tendermint/pull/4795) Return err on `signChallenge()` instead of panic
- [privval] [\#5437](https://github.com/tendermint/tendermint/pull/5437) `NewSignerDialerEndpoint` can now be given `SignerServiceEndpointOption` (@erikgrinaker)
- [rpc] [\#4968](https://github.com/tendermint/tendermint/pull/4968) JSON encoding is now handled by `libs/json`, not Amino (@erikgrinaker)
- [rpc] [\#5293](https://github.com/tendermint/tendermint/pull/5293) `/dial_peers` has added `private` and `unconditional` as parameters. (@marbar3778)
- [state] [\#4781](https://github.com/tendermint/tendermint/pull/4781) Export `InitStateVersion` for the initial state version (@erikgrinaker)
- [txindex] [\#4466](https://github.com/tendermint/tendermint/pull/4466) Allow to index an event at runtime (@favadi)
  - `abci.EventAttribute` replaces `KV.Pair`
- [types] [\#4905](https://github.com/tendermint/tendermint/pull/4905) Add `ValidateBasic` to validator and validator set (@cmwaters)
- [types] [\#5340](https://github.com/tendermint/tendermint/pull/5340) Add check in `Header.ValidateBasic()` for block protocol version (@marbar3778)
- [types] [\#5490](https://github.com/tendermint/tendermint/pull/5490) Use `Commit` and `CommitSig` max sizes instead of vote max size to calculate the maximum block size. (@cmwaters)


### BUG FIXES

- [abci/grpc] [\#5520](https://github.com/tendermint/tendermint/pull/5520) Return async responses in order, to avoid mempool panics. (@erikgrinaker)
- [blockchain/v2] [\#4971](https://github.com/tendermint/tendermint/pull/4971) Correctly set block store base in status responses (@erikgrinaker)
- [blockchain/v2] [\#5499](https://github.com/tendermint/tendermint/pull/5499) Fix "duplicate block enqueued by processor" panic (@melekes)
- [blockchain/v2] [\#5530](https://github.com/tendermint/tendermint/pull/5530) Fix out of order block processing panic (@melekes)
- [blockchain/v2] [\#5553](https://github.com/tendermint/tendermint/pull/5553) Make the removal of an already removed peer a noop (@melekes)
- [consensus] [\#4895](https://github.com/tendermint/tendermint/pull/4895) Cache the address of the validator to reduce querying a remote KMS (@joe-bowman)
- [consensus] [\#4970](https://github.com/tendermint/tendermint/pull/4970) Don't allow `LastCommitRound` to be negative (@cuonglm)
- [consensus] [\#5329](https://github.com/tendermint/tendermint/pull/5329) Fix wrong proposer schedule for validators returned by `InitChain` (@erikgrinaker)
- [docker] [\#5385](https://github.com/tendermint/tendermint/pull/5385) Fix incorrect `time_iota_ms` default setting causing block timestamp drift (@erikgrinaker)
- [evidence] [\#5170](https://github.com/tendermint/tendermint/pull/5170) Change ABCI evidence time to the time the infraction happened not the time the evidence was committed on the block (@cmwaters)
- [evidence] [\#5610](https://github.com/tendermint/tendermint/pull/5610) Make it possible for ABCI evidence to be formed from Tendermint evidence (@cmwaters)
- [libs/rand] [\#5215](https://github.com/tendermint/tendermint/pull/5215) Fix out-of-memory error on unexpected argument of Str() (@SadPencil)
- [light] [\#5307](https://github.com/tendermint/tendermint/pull/5307) Persist correct proposer priority in light client validator sets (@cmwaters)
- [p2p] [\#5136](https://github.com/tendermint/tendermint/pull/5136) Fix error for peer with the same ID but different IPs (@valardragon)
- [privval] [\#5638](https://github.com/tendermint/tendermint/pull/5638) Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
- [proxy] [\#5078](https://github.com/tendermint/tendermint/pull/5078) Force Tendermint to exit when ABCI app crashes  (@melekes)
- [rpc] [\#5660](https://github.com/tendermint/tendermint/pull/5660) Set `application/json` as the `Content-Type` header in RPC responses. (@alexanderbez)
- [store] [\#5382](https://github.com/tendermint/tendermint/pull/5382) Fix race conditions when loading/saving/pruning blocks (@erikgrinaker)

## v0.33.8

*August 11, 2020*

### Go security update

Go reported a security vulnerability that affected the `encoding/binary` package. The most recent binary for tendermint is using 1.14.6, for this
reason the Tendermint engineering team has opted to conduct a release to aid users in using the correct version of Go. Read more about the security issue [here](https://github.com/golang/go/issues/40618).


## v0.33.7

 *August 4, 2020*

 ### BUG FIXES:

 - [go] Build release binary using Go 1.14.4, to avoid halt caused by Go 1.14.1 (https://github.com/golang/go/issues/38223)
 - [privval] [\#5140](https://github.com/tendermint/tendermint/pull/5140) `RemoteSignerError` from remote signers are no longer retried (@melekes)


## v0.33.6

*July 2, 2020*

This security release fixes:

### Denial of service

Tendermint 0.33.0 and above allow block proposers to include signatures for the
wrong block. This may happen naturally if you start a network, have it run for
some time and restart it **without changing the chainID**. (It is a
[misconfiguration](https://docs.tendermint.com/master/tendermint-core/using-tendermint.html)
to reuse chainIDs.) Correct block proposers will accidentally include signatures
for the wrong block if they see these signatures, and then commits won't validate,
making all proposed blocks invalid. A malicious validator (even with a minimal
amount of stake) can use this vulnerability to completely halt the network.

Tendermint 0.33.6 checks all the signatures are for the block with +2/3
majority before creating a commit.

### False Witness

Tendermint 0.33.1 and above are no longer fully verifying commit signatures
during block execution - they stop after +2/3. This means proposers can propose
blocks that contain valid +2/3 signatures and then the rest of the signatures
can be whatever they want. They can claim that all the other validators signed
just by including a CommitSig with arbitrary signature data. While this doesn't
seem to impact safety of Tendermint per se, it means that Commits may contain a
lot of invalid data.

_This was already true of blocks, since they could include invalid txs filled
with garbage, but in that case the application knew that they are invalid and
could punish the proposer. But since applications didn't--and don't--
verify commit signatures directly (they trust Tendermint to do that),
they won't be able to detect it._

This can impact incentivization logic in the application that depends on the
LastCommitInfo sent in BeginBlock, which includes which validators signed. For
instance, Gaia incentivizes proposers with a bonus for including more than +2/3
of the signatures. But a proposer can now claim that bonus just by including
arbitrary data for the final -1/3 of validators without actually waiting for
their signatures. There may be other tricks that can be played because of this.

Tendermint 0.33.6 verifies all the signatures during block execution.

_Please note that the light client does not check nil votes and exits as soon
as 2/3+ of the signatures are checked._

**All clients are recommended to upgrade.**

Special thanks to @njmurarka at Bluzelle Networks for reporting this.

### SECURITY:

- [consensus] Do not allow signatures for a wrong block in commits (@ebuchman)
- [consensus] Verify all the signatures during block execution (@melekes)

**Please note that the fix for the False Witness issue renames the `VerifyCommitTrusting`
function to `VerifyCommitLightTrusting`. If you were relying on the light client, you may
need to update your code.**

## v0.33.5

*May 28, 2020*

Special thanks to external contributors on this release: @tau3,

### BREAKING CHANGES:

- Go API

  - [privval] [\#4744](https://github.com/tendermint/tendermint/pull/4744) Remove deprecated `OldFilePV` (@melekes)
  - [mempool] [\#4759](https://github.com/tendermint/tendermint/pull/4759) Modify `Mempool#InitWAL` to return an error (@melekes)
  - [node] [\#4832](https://github.com/tendermint/tendermint/pull/4832) `ConfigureRPC` returns an error (@melekes)
  - [rpc] [\#4836](https://github.com/tendermint/tendermint/pull/4836) Overhaul `lib` folder (@melekes)
    Move lib/ folder to jsonrpc/.
    Rename:
      rpc package -> jsonrpc package
      rpcclient package -> client package
      rpcserver package -> server package
      JSONRPCClient to Client
      JSONRPCRequestBatch to RequestBatch
      JSONRPCCaller to Caller
      StartHTTPServer to Serve
      StartHTTPAndTLSServer to ServeTLS
      NewURIClient to NewURI
      NewJSONRPCClient to New
      NewJSONRPCClientWithHTTPClient to NewWithHTTPClient
      NewWSClient to NewWS
    Unexpose ResponseWriterWrapper
    Remove unused http_params.go


### FEATURES:

- [pex] [\#4439](https://github.com/tendermint/tendermint/pull/4439) Use highwayhash for pex buckets (@tau3)

### IMPROVEMENTS:

- [abci/server] [\#4719](https://github.com/tendermint/tendermint/pull/4719) Print panic & stack trace to STDERR if logger is not set (@melekes)
- [types] [\#4638](https://github.com/tendermint/tendermint/pull/4638) Implement `Header#ValidateBasic` (@alexanderbez)
- [buildsystem] [\#4378](https://github.com/tendermint/tendermint/pull/4738) Replace build_c and install_c with TENDERMINT_BUILD_OPTIONS parsing. The following options are available:
  - nostrip: don't strip debugging symbols nor DWARF tables.
  - cleveldb: use cleveldb as db backend instead of goleveldb.
  - race: pass -race to go build and enable data race detection.
- [mempool] [\#4759](https://github.com/tendermint/tendermint/pull/4759) Allow ReapX and CheckTx functions to run in parallel (@melekes)
- [rpc/core] [\#4844](https://github.com/tendermint/tendermint/pull/4844) Do not lock consensus state in `/validators`, `/consensus_params` and `/status` (@melekes)

### BUG FIXES:

- [blockchain/v2] [\#4761](https://github.com/tendermint/tendermint/pull/4761) Fix excessive CPU usage caused by spinning on closed channels (@erikgrinaker)
- [blockchain/v2] Respect `fast_sync` option (@erikgrinaker)
- [light] [\#4741](https://github.com/tendermint/tendermint/pull/4741) Correctly return  `ErrSignedHeaderNotFound` and `ErrValidatorSetNotFound` on corresponding RPC errors (@erikgrinaker)
- [rpc] [\#4805](https://github.com/tendermint/tendermint/issues/4805) Attempt to handle panics during panic recovery (@erikgrinaker)
- [types] [\#4764](https://github.com/tendermint/tendermint/pull/4764) Return an error if voting power overflows in `VerifyCommitTrusting` (@melekes)
- [privval] [\#4812](https://github.com/tendermint/tendermint/pull/4812) Retry `GetPubKey/SignVote/SignProposal` a few times before returning an error (@melekes)
- [p2p] [\#4847](https://github.com/tendermint/tendermint/pull/4847) Return masked IP (not the actual IP) in addrbook#groupKey (@melekes)

## v0.33.4

- Nodes are no longer guaranteed to contain all blocks up to the latest height. The ABCI app can now control which blocks to retain through the ABCI field `ResponseCommit.retain_height`, all blocks and associated data below this height will be removed.

*April 21, 2020*

Special thanks to external contributors on this release: @whylee259, @greg-szabo

### BREAKING CHANGES:

- Go API

  - [lite2] [\#4616](https://github.com/tendermint/tendermint/pull/4616) Make `maxClockDrift` an option `Verify/VerifyAdjacent/VerifyNonAdjacent` now accept `maxClockDrift time.Duration` (@melekes).
  - [rpc/client] [\#4628](https://github.com/tendermint/tendermint/pull/4628) Split out HTTP and local clients into `http` and `local` packages (@erikgrinaker).

### FEATURES:

- [abci] [\#4588](https://github.com/tendermint/tendermint/issues/4588) Add `ResponseCommit.retain_height` field, which will automatically remove blocks below this height. This bumps the ABCI version to 0.16.2 (@erikgrinaker).
- [cmd] [\#4665](https://github.com/tendermint/tendermint/pull/4665) New `tendermint completion` command to generate Bash/Zsh completion scripts (@alessio).
- [rpc] [\#4588](https://github.com/tendermint/tendermint/issues/4588) Add `/status` response fields for the earliest block available on the node (@erikgrinaker).
- [rpc] [\#4611](https://github.com/tendermint/tendermint/pull/4611) Add `codespace` to `ResultBroadcastTx` (@whylee259).

### IMPROVEMENTS:

- [all] [\#4608](https://github.com/tendermint/tendermint/pull/4608) Give reactors descriptive names when they're initialized (@tessr).
- [blockchain] [\#4588](https://github.com/tendermint/tendermint/issues/4588) Add `Base` to blockchain reactor P2P messages `StatusRequest` and `StatusResponse` (@erikgrinaker).
- [Docker] [\#4569](https://github.com/tendermint/tendermint/issues/4569) Default configuration added to docker image (you can still mount your own config the same way) (@greg-szabo).
- [example/kvstore] [\#4588](https://github.com/tendermint/tendermint/issues/4588) Add `RetainBlocks` option to control block retention (@erikgrinaker).
- [evidence] [\#4632](https://github.com/tendermint/tendermint/pull/4632) Inbound evidence checked if already existing (@cmwaters).
- [lite2] [\#4575](https://github.com/tendermint/tendermint/pull/4575) Use bisection for within-range verification (@cmwaters).
- [lite2] [\#4562](https://github.com/tendermint/tendermint/pull/4562) Cache headers when using bisection (@cmwaters).
- [p2p] [\#4548](https://github.com/tendermint/tendermint/pull/4548) Add ban list to address book (@cmwaters).
- [privval] [\#4534](https://github.com/tendermint/tendermint/issues/4534) Add `error` as a return value on`GetPubKey()` (@marbar3778).
- [p2p] [\#4621](https://github.com/tendermint/tendermint/issues/4621) Ban peers when messages are unsolicited or too frequent (@cmwaters).
- [rpc] [\#4703](https://github.com/tendermint/tendermint/pull/4703) Add `count` and `total` to `/validators` response (@melekes).
- [tools] [\#4615](https://github.com/tendermint/tendermint/issues/4615) Allow developers to use Docker to generate proto stubs, via `make proto-gen-docker` (@erikgrinaker).

### BUG FIXES:

- [rpc] [\#4568](https://github.com/tendermint/tendermint/issues/4568) Fix panic when `Subscribe` is called, but HTTP client is not running. `Subscribe`, `Unsubscribe(All)` methods return an error now (@melekes).

## v0.33.3

*April 6, 2020*

This security release fixes:

### Denial of service 1

Tendermint 0.33.2 and earlier does not limit P2P connection requests number.
For each p2p connection, Tendermint allocates ~0.5MB. Even though this
memory is garbage collected once the connection is terminated (due to duplicate
IP or reaching a maximum number of inbound peers), temporary memory spikes can
lead to OOM (Out-Of-Memory) exceptions.

Tendermint 0.33.3 (and 0.32.10) limits the total number of P2P incoming
connection requests to to `p2p.max_num_inbound_peers +
len(p2p.unconditional_peer_ids)`.

Notes:

- Tendermint does not rate limit P2P connection requests per IP (an attacker
  can saturate all the inbound slots);
- Tendermint does not rate limit HTTP(S) requests. If you expose any RPC
  endpoints to the public, please make sure to put in place some protection
  (https://www.nginx.com/blog/rate-limiting-nginx/). We may implement this in
  the future ([\#1696](https://github.com/tendermint/tendermint/issues/1696)).

### Denial of service 2

Tendermint 0.33.2 and earlier does not reclaim `activeID` of a peer after it's
removed in `Mempool` reactor. This does not happen all the time. It only
happens when a connection fails (for any reason) before the Peer is created and
added to all reactors. `RemovePeer` is therefore called before `AddPeer`, which
leads to always growing memory (`activeIDs` map). The `activeIDs` map has a
maximum size of 65535 and the node will panic if this map reaches the maximum.
An attacker can create a lot of connection attempts (exploiting Denial of
service 1), which ultimately will lead to the node panicking.

Tendermint 0.33.3 (and 0.32.10) claims `activeID` for a peer in `InitPeer`,
which is executed before `MConnection` is started.

Notes:

- `InitPeer` function was added to all reactors to combat a similar issue -
  [\#3338](https://github.com/tendermint/tendermint/issues/3338);
- Denial of service 2 is independent of Denial of service 1 and can be executed
  without it.

**All clients are recommended to upgrade**

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
and reporting this.

### SECURITY:

- [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
- [p2p] Limit the number of incoming connections (@melekes)

## v0.33.2

*March 11, 2020*

Special thanks to external contributors on this release:
@antho1404, @michaelfig, @gterzian, @tau3, @Shivani912

### BREAKING CHANGES:

- CLI/RPC/Config
  - [cli] [\#4505](https://github.com/tendermint/tendermint/pull/4505) `tendermint lite` sub-command new syntax (@melekes):
    `lite cosmoshub-3 -p 52.57.29.196:26657 -w public-seed-node.cosmoshub.certus.one:26657
    --height 962118 --hash 28B97BE9F6DE51AC69F70E0B7BFD7E5C9CD1A595B7DC31AFF27C50D4948`

- Go API
  - [lite2] [\#4535](https://github.com/tendermint/tendermint/pull/4535) Remove `Start/Stop` (@melekes)
  - [lite2] [\#4469](https://github.com/tendermint/tendermint/issues/4469) Remove `RemoveNoLongerTrustedHeaders` and `RemoveNoLongerTrustedHeadersPeriod` option (@cmwaters)
  - [lite2] [\#4473](https://github.com/tendermint/tendermint/issues/4473) Return height as a 2nd param in `TrustedValidatorSet` (@melekes)
  - [lite2] [\#4536](https://github.com/tendermint/tendermint/pull/4536) `Update` returns a signed header (1st param) (@melekes)


### IMPROVEMENTS:

- [blockchain/v2] [\#4361](https://github.com/tendermint/tendermint/pull/4361) Add reactor (@brapse)
- [cmd] [\#4515](https://github.com/tendermint/tendermint/issues/4515) Change `tendermint debug dump` sub-command archives filename's format (@melekes)
- [consensus] [\#3583](https://github.com/tendermint/tendermint/issues/3583) Reduce `non-deterministic signature` log noise (@tau3)
- [examples/kvstore] [\#4507](https://github.com/tendermint/tendermint/issues/4507) ABCI query now returns the proper height (@erikgrinaker)
- [lite2] [\#4462](https://github.com/tendermint/tendermint/issues/4462) Add `NewHTTPClient` and `NewHTTPClientFromTrustedStore` (@cmwaters)
- [lite2] [\#4329](https://github.com/tendermint/tendermint/issues/4329) modified bisection to loop (@cmwaters)
- [lite2] [\#4385](https://github.com/tendermint/tendermint/issues/4385) Disconnect from bad nodes (@melekes)
- [lite2] [\#4398](https://github.com/tendermint/tendermint/issues/4398) Add `VerifyAdjacent` and `VerifyNonAdjacent` funcs (@cmwaters)
- [lite2] [\#4426](https://github.com/tendermint/tendermint/issues/4426) Don't save intermediate headers (@cmwaters)
- [lite2] [\#4464](https://github.com/tendermint/tendermint/issues/4464) Cross-check first header (@cmwaters)
- [lite2] [\#4470](https://github.com/tendermint/tendermint/issues/4470) Fix inconsistent header-validatorset pairing (@melekes)
- [lite2] [\#4488](https://github.com/tendermint/tendermint/issues/4488) Allow local clock drift -10 sec. (@melekes)
- [p2p] [\#4449](https://github.com/tendermint/tendermint/pull/4449) Use `curve25519.X25519()` instead of `ScalarMult` (@erikgrinaker)
- [types] [\#4417](https://github.com/tendermint/tendermint/issues/4417) **VerifyCommitX() functions should return as soon as +2/3 threshold is reached** (@alessio).
- [libs/kv] [\#4542](https://github.com/tendermint/tendermint/pull/4542) remove unused type KI64Pair (@tessr)

### BUG FIXES:

- [cmd] [\#4303](https://github.com/tendermint/tendermint/issues/4303) Show useful error when Tendermint is not initialized (@melekes)
- [cmd] [\#4515](https://github.com/tendermint/tendermint/issues/4515) **Fix `tendermint debug kill` sub-command** (@melekes)
- [rpc] [\#3935](https://github.com/tendermint/tendermint/issues/3935) **Create buffered subscriptions on `/subscribe`** (@melekes)
- [rpc] [\#4375](https://github.com/tendermint/tendermint/issues/4375) Stop searching for txs in `/tx_search` upon client timeout (@gterzian)
- [rpc] [\#4406](https://github.com/tendermint/tendermint/pull/4406) Fix issue with multiple subscriptions on the websocket (@antho1404)
- [rpc] [\#4432](https://github.com/tendermint/tendermint/issues/4432) Fix `/tx_search` pagination with ordered results (@erikgrinaker)
- [rpc] [\#4492](https://github.com/tendermint/tendermint/issues/4492) Keep the original subscription "id" field when new RPCs come in (@michaelfig)


## v0.33.1

*Feburary 13, 2020*

Special thanks to external contributors on this release:
@princesinha19

### FEATURES:

- [rpc] [\#3333](https://github.com/tendermint/tendermint/issues/3333) Add `order_by` to `/tx_search` endpoint, allowing to change default ordering from asc to desc (@princesinha19)

### IMPROVEMENTS:

- [proto] [\#4369](https://github.com/tendermint/tendermint/issues/4369) Add [buf](https://buf.build/) for usage with linting and checking if there are breaking changes with the master branch.
- [proto] [\#4369](https://github.com/tendermint/tendermint/issues/4369) Add `make proto-gen` cmd to generate proto stubs outside of GOPATH.

### BUG FIXES:

- [node] [\#4311](https://github.com/tendermint/tendermint/issues/4311) Use `GRPCMaxOpenConnections` when creating the gRPC server, not `MaxOpenConnections`
- [rpc] [\#4319](https://github.com/tendermint/tendermint/issues/4319) Check `BlockMeta` is not nil in `/block` & `/block_by_hash`

## v0.33

Special thanks to external contributors on this release: @mrekucci, @PSalant726, @princesinha19, @greg-szabo, @dongsam, @cuonglm, @jgimeno, @yenkhoon

*January 14, 2020*

This release contains breaking changes to the `Block#Header`, specifically
`NumTxs` and `TotalTxs` were removed (\#2521). Here's how this change affects
different modules:

- apps: it breaks the ABCI header field numbering
- state: it breaks the format of `State` on disk
- RPC: all RPC requests which expose the header broke
- Go API: the `Header` broke
- P2P: since blocks go over the wire, technically the P2P protocol broke

Also, blocks are significantly smaller 🔥 because we got rid of the redundant
information in `Block#LastCommit`. `Commit` now mainly consists of a signature
and a validator address plus a timestamp. Note we may remove the validator
address & timestamp fields in the future (see ADR-25).

`lite2` package has been added to solve `lite` issues and introduce weak
subjectivity interface. Refer to the [spec](https://github.com/tendermint/spec/blob/master/spec/consensus/light-client.md) for complete details.
`lite` package is now deprecated and will be removed in v0.34 release.

### BREAKING CHANGES:

- CLI/RPC/Config

  - [rpc] [\#3471](https://github.com/tendermint/tendermint/issues/3471) Paginate `/validators` response (default: 30 vals per page)
  - [rpc] [\#3188](https://github.com/tendermint/tendermint/issues/3188) Remove `BlockMeta` in `ResultBlock` in favor of `BlockId` for `/block`
  - [rpc] `/block_results` response format updated (see RPC docs for details)
    ```
    {
      "jsonrpc": "2.0",
      "id": "",
      "result": {
        "height": "2109",
        "txs_results": null,
        "begin_block_events": null,
        "end_block_events": null,
        "validator_updates": null,
        "consensus_param_updates": null
      }
    }
    ```
  - [rpc] [\#4141](https://github.com/tendermint/tendermint/pull/4141) Remove `#event` suffix from the ID in event responses.
    `{"jsonrpc": "2.0", "id": 0, "result": ...}`
  - [rpc] [\#4141](https://github.com/tendermint/tendermint/pull/4141) Switch to integer IDs instead of `json-client-XYZ`
    ```
    id=0 method=/subscribe
    id=0 result=...
    id=1 method=/abci_query
    id=1 result=...
    ```
    - ID is unique for each request;
    - Request.ID is now optional. Notification is a Request without an ID. Previously ID="" or ID=0 were considered as notifications.

  - [config] [\#4046](https://github.com/tendermint/tendermint/issues/4046) Rename tag(s) to CompositeKey & places where tag is still present it was renamed to event or events. Find how a compositeKey is constructed [here](https://github.com/tendermint/tendermint/blob/6d05c531f7efef6f0619155cf10ae8557dd7832f/docs/app-dev/indexing-transactions.md)
    - You will have to generate a new config for your Tendermint node(s)
  - [genesis] [\#2565](https://github.com/tendermint/tendermint/issues/2565) Add `consensus_params.evidence.max_age_duration`. Rename
    `consensus_params.evidence.max_age` to `max_age_num_blocks`.
  - [cli] [\#1771](https://github.com/tendermint/tendermint/issues/1771) `tendermint lite` now uses new light client package (`lite2`)
    and has 3 more flags: `--trusting-period`, `--trusted-height` and
    `--trusted-hash`

- Apps

  - [tm-bench] Removed tm-bench in favor of [tm-load-test](https://github.com/informalsystems/tm-load-test)

- Go API

  - [rpc] [\#3953](https://github.com/tendermint/tendermint/issues/3953) Modify NewHTTP, NewXXXClient functions to return an error on invalid remote instead of panicking (@mrekucci)
  - [rpc/client] [\#3471](https://github.com/tendermint/tendermint/issues/3471) `Validators` now requires two more args: `page` and `perPage`
  - [libs/common] [\#3262](https://github.com/tendermint/tendermint/issues/3262) Make error the last parameter of `Task` (@PSalant726)
  - [cs/types] [\#3262](https://github.com/tendermint/tendermint/issues/3262) Rename `GotVoteFromUnwantedRoundError` to `ErrGotVoteFromUnwantedRound` (@PSalant726)
  - [libs/common] [\#3862](https://github.com/tendermint/tendermint/issues/3862) Remove `errors.go` from `libs/common`
  - [libs/common] [\#4230](https://github.com/tendermint/tendermint/issues/4230) Move `KV` out of common to its own pkg
  - [libs/common] [\#4230](https://github.com/tendermint/tendermint/issues/4230) Rename `cmn.KVPair(s)` to `kv.Pair(s)`s
  - [libs/common] [\#4232](https://github.com/tendermint/tendermint/issues/4232) Move `Service` & `BaseService` from `libs/common` to `libs/service`
  - [libs/common] [\#4232](https://github.com/tendermint/tendermint/issues/4232) Move `common/nil.go` to `types/utils.go` & make the functions private
  - [libs/common] [\#4231](https://github.com/tendermint/tendermint/issues/4231) Move random functions from `libs/common` into pkg `rand`
  - [libs/common] [\#4237](https://github.com/tendermint/tendermint/issues/4237) Move byte functions from `libs/common` into pkg `bytes`
  - [libs/common] [\#4237](https://github.com/tendermint/tendermint/issues/4237) Move throttletimer functions from `libs/common` into pkg `timer`
  - [libs/common] [\#4237](https://github.com/tendermint/tendermint/issues/4237) Move tempfile functions from `libs/common` into pkg `tempfile`
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move os functions from `libs/common` into pkg `os`
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move net functions from `libs/common` into pkg `net`
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move mathematical functions and types out of `libs/common` to `math` pkg
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move string functions out of `libs/common` to `strings` pkg
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move async functions out of `libs/common` to `async` pkg
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move bit functions out of `libs/common` to `bits` pkg
  - [libs/common] [\#4240](https://github.com/tendermint/tendermint/issues/4240) Move cmap functions out of `libs/common` to `cmap` pkg
  - [libs/common] [\#4258](https://github.com/tendermint/tendermint/issues/4258) Remove `Rand` from all `rand` pkg functions
  - [types] [\#2565](https://github.com/tendermint/tendermint/issues/2565) Remove `MockBadEvidence` & `MockGoodEvidence` in favor of `MockEvidence`

- Blockchain Protocol

  - [abci] [\#2521](https://github.com/tendermint/tendermint/issues/2521) Remove `TotalTxs` and `NumTxs` from `Header`
  - [types] [\#4151](https://github.com/tendermint/tendermint/pull/4151) Enforce ordering of votes in DuplicateVoteEvidence to be lexicographically sorted on BlockID
  - [types] [\#1648](https://github.com/tendermint/tendermint/issues/1648) Change `Commit` to consist of just signatures

- P2P Protocol

  - [p2p] [\#3668](https://github.com/tendermint/tendermint/pull/3668) Make `SecretConnection` non-malleable

- [proto] [\#3986](https://github.com/tendermint/tendermint/pull/3986) Prefix protobuf types to avoid name conflicts.
  - ABCI becomes `tendermint.abci.types` with the new API endpoint `/tendermint.abci.types.ABCIApplication/`
  - core_grpc becomes `tendermint.rpc.grpc` with the new API endpoint `/tendermint.rpc.grpc.BroadcastAPI/`
  - merkle becomes `tendermint.crypto.merkle`
  - libs.common becomes `tendermint.libs.common`
  - proto3 becomes `tendermint.types.proto3`

### FEATURES:

- [p2p] [\#4053](https://github.com/tendermint/tendermint/issues/4053) Add `unconditional_peer_ids` and `persistent_peers_max_dial_period` config variables (see ADR-050) (@dongsam)
- [tools] [\#4227](https://github.com/tendermint/tendermint/pull/4227) Implement `tendermint debug kill` and
  `tendermint debug dump` commands for Tendermint node debugging functionality. See `--help` in both
  commands for further documentation and usage.
- [cli] [\#4234](https://github.com/tendermint/tendermint/issues/4234) Add `--db_backend and --db_dir` flags (@princesinha19)
- [cli] [\#4113](https://github.com/tendermint/tendermint/issues/4113) Add optional `--genesis_hash` flag to check genesis hash upon startup
- [config] [\#3831](https://github.com/tendermint/tendermint/issues/3831) Add support for [RocksDB](https://rocksdb.org/) (@Stumble)
- [rpc] [\#3985](https://github.com/tendermint/tendermint/issues/3985) Add new `/block_by_hash` endpoint, which allows to fetch a block by its hash (@princesinha19)
- [metrics] [\#4263](https://github.com/tendermint/tendermint/issues/4263) Add
  - `consensus_validator_power`: track your validators power
  - `consensus_validator_last_signed_height`: track at which height the validator last signed
  - `consensus_validator_missed_blocks`: total amount of missed blocks for a validator
  as gauges in prometheus for validator specific metrics
- [rpc/lib] [\#4248](https://github.com/tendermint/tendermint/issues/4248) RPC client basic authentication support (@greg-szabo)
- [lite2] [\#1771](https://github.com/tendermint/tendermint/issues/1771) Light client with weak subjectivity

### IMPROVEMENTS:

- [rpc] [\#3188](https://github.com/tendermint/tendermint/issues/3188) Added `block_size` to `BlockMeta` this is reflected in `/blockchain`
- [types] [\#2521](https://github.com/tendermint/tendermint/issues/2521) Add `NumTxs` to `BlockMeta` and `EventDataNewBlockHeader`
- [p2p] [\#4185](https://github.com/tendermint/tendermint/pull/4185) Simplify `SecretConnection` handshake with merlin
- [cli] [\#4065](https://github.com/tendermint/tendermint/issues/4065) Add `--consensus.create_empty_blocks_interval` flag (@jgimeno)
- [docs] [\#4065](https://github.com/tendermint/tendermint/issues/4065) Document `--consensus.create_empty_blocks_interval` flag (@jgimeno)
- [crypto] [\#4190](https://github.com/tendermint/tendermint/pull/4190) Added SR25519 signature scheme
- [abci] [\#4177] kvstore: Return `LastBlockHeight` and `LastBlockAppHash` in `Info` (@princesinha19)
- [rpc] [\#2741](https://github.com/tendermint/tendermint/issues/2741) Add `proposer` to `/consensus_state` response (@princesinha19)
- [deps] [\#4289](https://github.com/tendermint/tendermint/pull/4289) Update tm-db to 0.4.0, this includes major breaking changes in the dep that change how errors are handled.

### BUG FIXES:

- [rpc/lib][\#4051](https://github.com/tendermint/tendermint/pull/4131) Fix RPC client, which was previously resolving https protocol to http (@yenkhoon)
- [rpc] [\#4141](https://github.com/tendermint/tendermint/pull/4141) JSONRPCClient: validate that Response.ID matches Request.ID
- [rpc] [\#4141](https://github.com/tendermint/tendermint/pull/4141) WSClient: check for unsolicited responses
- [types] [\4164](https://github.com/tendermint/tendermint/pull/4164) Prevent temporary power overflows on validator updates
- [cs] [\#4069](https://github.com/tendermint/tendermint/issues/4069) Don't panic when block meta is not found in store (@gregzaitsev)
- [types] [\#4164](https://github.com/tendermint/tendermint/issues/4164) Prevent temporary power overflows on validator updates (joint
  efforts of @gchaincl and @ancazamfir)
- [p2p] [\#4140](https://github.com/tendermint/tendermint/issues/4140) `SecretConnection`: use the transcript solely for authentication (i.e. MAC)
- [consensus/types] [\#4243](https://github.com/tendermint/tendermint/issues/4243) fix BenchmarkRoundStateDeepCopy panics (@cuonglm)
- [rpc] [\#4256](https://github.com/tendermint/tendermint/issues/4256) Pass `outCapacity` to `eventBus#Subscribe` when subscribing using a local client

## v0.32.13

*August 5, 2020*

 ### BUG FIXES

 - [privval] [\#5112](https://github.com/tendermint/tendermint/issues/5112) If remote signer errors, don't retry (@melekes)

## v0.32.12

*May 19, 2020*

### BUG FIXES

- [p2p] [\#4847](https://github.com/tendermint/tendermint/pull/4847) Return masked IP (not the actual IP) in addrbook#groupKey (@melekes)

## v0.32.11

*April 29, 2020*

### BUG FIXES:

- [privval] [\#4275](https://github.com/tendermint/tendermint/issues/4275) Fix consensus failure when remote signer drops (@melekes)

## v0.32.10

*April 6, 2020*

This security release fixes:

### Denial of Service 1

Tendermint 0.33.2 and earlier does not limit the number of P2P connection
requests. For each p2p connection, Tendermint allocates ~0.5MB. Even though
this memory is garbage collected once the connection is terminated (due to
duplicate IP or reaching a maximum number of inbound peers), temporary memory
spikes can lead to OOM (Out-Of-Memory) exceptions.

Tendermint 0.33.3 (and 0.32.10) limits the total number of P2P incoming
connection requests to to `p2p.max_num_inbound_peers +
len(p2p.unconditional_peer_ids)`.

Notes:

- Tendermint does not rate limit P2P connection requests per IP (an attacker
  can saturate all the inbound slots);
- Tendermint does not rate limit HTTP(S) requests. If you expose any RPC
  endpoints to the public, please make sure to put in place some protection
  (https://www.nginx.com/blog/rate-limiting-nginx/). We may implement this in
  the future ([\#1696](https://github.com/tendermint/tendermint/issues/1696)).

### Denial of Service 2

Tendermint 0.33.2 and earlier does not reclaim `activeID` of a peer after it's
removed in `Mempool` reactor. This does not happen all the time. It only
happens when a connection fails (for any reason) before the Peer is created and
added to all reactors. `RemovePeer` is therefore called before `AddPeer`, which
leads to always growing memory (`activeIDs` map). The `activeIDs` map has a
maximum size of 65535 and the node will panic if this map reaches the maximum.
An attacker can create a lot of connection attempts (exploiting Denial of
Service 1), which ultimately will lead to the node panicking.

Tendermint 0.33.3 (and 0.32.10) claims `activeID` for a peer in `InitPeer`,
which is executed before `MConnection` is started.

Notes:

- `InitPeer` function was added to all reactors to combat a similar issue -
  [\#3338](https://github.com/tendermint/tendermint/issues/3338);
- Denial of Service 2 is independent of Denial of Service 1 and can be executed
  without it.

**All clients are recommended to upgrade**

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
and reporting this.

### SECURITY:

- [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
- [p2p] Limit the number of incoming connections (@melekes)

## v0.32.9

_January, 9, 2020_

Special thanks to external contributors on this release: @greg-szabo, @gregzaitsev, @yenkhoon

### FEATURES:

- [rpc/lib] [\#4248](https://github.com/tendermint/tendermint/issues/4248) RPC client basic authentication support (@greg-szabo)

- [metrics] [\#4294](https://github.com/tendermint/tendermint/pull/4294) Add
  - `consensus_validator_power`: track your validators power
  - `consensus_validator_last_signed_height`: track at which height the validator last signed
  - `consensus_validator_missed_blocks`: total amount of missed blocks for a validator
    as gauges in prometheus for validator specific metrics

### BUG FIXES:

- [rpc/lib] [\#4131](https://github.com/tendermint/tendermint/pull/4131) Fix RPC client, which was previously resolving https protocol to http (@yenkhoon)
- [cs] [\#4069](https://github.com/tendermint/tendermint/issues/4069) Don't panic when block meta is not found in store (@gregzaitsev)

## v0.32.8

*November 19, 2019*

Special thanks to external contributors on this release: @erikgrinaker, @guagualvcha, @hsyis, @cosmostuba, @whunmr, @austinabell


### BREAKING CHANGES:

- Go API

  - [libs/pubsub] [\#4070](https://github.com/tendermint/tendermint/pull/4070) `Query#(Matches|Conditions)` returns an error.

### IMPROVEMENTS:

- [mempool] [\#4083](https://github.com/tendermint/tendermint/pull/4083) Added TxInfo parameter to CheckTx(), and removed CheckTxWithInfo() (@erikgrinaker)
- [mempool] [\#4057](https://github.com/tendermint/tendermint/issues/4057) Include peer ID when logging rejected txns (@erikgrinaker)
- [tools] [\#4023](https://github.com/tendermint/tendermint/issues/4023) Improved `tm-monitor` formatting of start time and avg tx throughput (@erikgrinaker)
- [p2p] [\#3991](https://github.com/tendermint/tendermint/issues/3991) Log "has been established or dialed" as debug log instead of Error for connected peers (@whunmr)
- [rpc] [\#4077](https://github.com/tendermint/tendermint/pull/4077) Added support for `EXISTS` clause to the Websocket query interface.
- [privval] Add `SignerDialerEndpointRetryWaitInterval` option (@cosmostuba)
- [crypto] Add `RegisterKeyType` to amino to allow external key types registration (@austinabell)

### BUG FIXES:

- [libs/pubsub] [\#4070](https://github.com/tendermint/tendermint/pull/4070) Strip out non-numeric characters when attempting to match numeric values.
- [libs/pubsub] [\#4070](https://github.com/tendermint/tendermint/pull/4070) No longer panic in Query#(Matches|Conditions) preferring to return an error instead.
- [tools] [\#4023](https://github.com/tendermint/tendermint/issues/4023) Refresh `tm-monitor` health when validator count is updated (@erikgrinaker)
- [state] [\#4104](https://github.com/tendermint/tendermint/pull/4104) txindex/kv: Fsync data to disk immediately after receiving it (@guagualvcha)
- [state] [\#4095](https://github.com/tendermint/tendermint/pull/4095) txindex/kv: Return an error if there's one when the user searches for a tx (hash=X) (@hsyis)

## v0.32.7

*October 18, 2019*

This security release fixes a vulnerability found in the `consensus` package,
where an attacker could construct a `BlockPartMessage` message in such a way
that it will lead to consensus failure. A few similar issues have been
identified and fixed here.

**All clients are recommended to upgrade**

Special thanks to [elvishacker](https://hackerone.com/elvishacker) for finding
and reporting this.

### BREAKING CHANGES:

- Go API
  - [consensus] Modify `WAL#Write` and `WAL#WriteSync` to return an error if
    they fail to write a message

### SECURITY:

- [consensus] Validate incoming messages more throughly

## v0.32.6

*October 8, 2019*

The previous patch was insufficient because the attacker could still find a way
to submit a `nil` pubkey by constructing a `PubKeyMultisigThreshold` pubkey
with `nil` subpubkeys for example.

This release provides multiple fixes, which include recovering from panics when
accepting new peers and only allowing `ed25519` pubkeys.

**All clients are recommended to upgrade**

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for pointing
this out.

### SECURITY:

- [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Only allow ed25519 pubkeys when connecting

## v0.32.5

*October 1, 2019*

This release fixes a major security vulnerability found in the `p2p` package.
All clients are recommended to upgrade. See
[\#4030](https://github.com/tendermint/tendermint/issues/4030) for details.

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for discovering
and reporting this issue.

### SECURITY:

- [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Fix for panic on nil public key send to a peer

## v0.32.4

*September 19, 2019*

Special thanks to external contributors on this release: @jon-certik, @gracenoah, @PSalant726, @gchaincl

### BREAKING CHANGES:

- CLI/RPC/Config
  - [rpc] [\#3984](https://github.com/tendermint/tendermint/issues/3984) Add `MempoolClient` interface to `Client` interface

### IMPROVEMENTS:

- [rpc] [\#2010](https://github.com/tendermint/tendermint/issues/2010) Add NewHTTPWithClient and NewJSONRPCClientWithHTTPClient (note these and NewHTTP, NewJSONRPCClient functions panic if remote is invalid) (@gracenoah)
- [rpc] [\#3882](https://github.com/tendermint/tendermint/issues/3882) Add custom marshalers to proto messages to disable `omitempty`
- [deps] [\#3952](https://github.com/tendermint/tendermint/pull/3952) bump github.com/go-kit/kit from 0.6.0 to 0.9.0
- [deps] [\#3951](https://github.com/tendermint/tendermint/pull/3951) bump github.com/stretchr/testify from 1.3.0 to 1.4.0
- [deps] [\#3945](https://github.com/tendermint/tendermint/pull/3945) bump github.com/gorilla/websocket from 1.2.0 to 1.4.1
- [deps] [\#3948](https://github.com/tendermint/tendermint/pull/3948) bump github.com/libp2p/go-buffer-pool from 0.0.1 to 0.0.2
- [deps] [\#3943](https://github.com/tendermint/tendermint/pull/3943) bump github.com/fortytw2/leaktest from 1.2.0 to 1.3.0
- [deps] [\#3939](https://github.com/tendermint/tendermint/pull/3939) bump github.com/rs/cors from 1.6.0 to 1.7.0
- [deps] [\#3937](https://github.com/tendermint/tendermint/pull/3937) bump github.com/magiconair/properties from 1.8.0 to 1.8.1
- [deps] [\#3947](https://github.com/tendermint/tendermint/pull/3947) update gogo/protobuf version from v1.2.1 to v1.3.0
- [deps] [\#4001](https://github.com/tendermint/tendermint/pull/4001) bump github.com/tendermint/tm-db from 0.1.1 to 0.2.0

### BUG FIXES:

- [consensus] [\#3908](https://github.com/tendermint/tendermint/issues/3908) Wait `timeout_commit` to pass even if `create_empty_blocks` is `false`
- [mempool] [\#3968](https://github.com/tendermint/tendermint/issues/3968) Fix memory loading error on 32-bit machines (@jon-certik)

## v0.32.3

*August 28, 2019*

@climber73 wrote the [Writing a Tendermint Core application in Java
(gRPC)](https://github.com/tendermint/tendermint/blob/master/docs/guides/java.md)
guide.

Special thanks to external contributors on this release:
@gchaincl, @bluele, @climber73

### IMPROVEMENTS:

- [consensus] [\#3839](https://github.com/tendermint/tendermint/issues/3839) Reduce "Error attempting to add vote" message severity (Error -> Info)
- [mempool] [\#3877](https://github.com/tendermint/tendermint/pull/3877) Make `max_tx_bytes` configurable instead of `max_msg_bytes` (@bluele)
- [privval] [\#3370](https://github.com/tendermint/tendermint/issues/3370) Refactor and simplify validator/kms connection handling. Please refer to [this comment](https://github.com/tendermint/tendermint/pull/3370#issue-257360971) for details
- [rpc] [\#3880](https://github.com/tendermint/tendermint/issues/3880) Document endpoints with `swagger`, introduce contract tests of implementation against documentation

### BUG FIXES:

- [config] [\#3868](https://github.com/tendermint/tendermint/issues/3868) Move misplaced `max_msg_bytes` into mempool section (@bluele)
- [rpc] [\#3910](https://github.com/tendermint/tendermint/pull/3910) Fix DATA RACE in HTTP client (@gchaincl)
- [store] [\#3893](https://github.com/tendermint/tendermint/issues/3893) Fix "Unregistered interface types.Evidence" panic

## v0.32.2

*July 31, 2019*

Special thanks to external contributors on this release:
@ruseinov, @bluele, @guagualvcha

### BREAKING CHANGES:

- Go API
  - [libs] [\#3811](https://github.com/tendermint/tendermint/issues/3811) Remove `db` from libs in favor of `https://github.com/tendermint/tm-db`

### FEATURES:

- [blockchain] [\#3561](https://github.com/tendermint/tendermint/issues/3561) Add early version of the new blockchain reactor, which is supposed to be more modular and testable compared to the old version. To try it, you'll have to change `version` in the config file, [here](https://github.com/tendermint/tendermint/blob/master/config/toml.go#L303) NOTE: It's not ready for a production yet. For further information, see [ADR-40](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-040-blockchain-reactor-refactor.md) & [ADR-43](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-043-blockchain-riri-org.md)
- [mempool] [\#3826](https://github.com/tendermint/tendermint/issues/3826) Make `max_msg_bytes` configurable(@bluele)
- [node] [\#3846](https://github.com/tendermint/tendermint/pull/3846) Allow replacing existing p2p.Reactor(s) using [`CustomReactors`
  option](https://godoc.org/github.com/tendermint/tendermint/node#CustomReactors).
  Warning: beware of accidental name clashes. Here is the list of existing
  reactors: MEMPOOL, BLOCKCHAIN, CONSENSUS, EVIDENCE, PEX.
- [rpc] [\#3818](https://github.com/tendermint/tendermint/issues/3818) Make `max_body_bytes` and `max_header_bytes` configurable(@bluele)
- [rpc] [\#2252](https://github.com/tendermint/tendermint/issues/2252) Add `/broadcast_evidence` endpoint to submit double signing and other types of evidence

### IMPROVEMENTS:

- [abci] [\#3809](https://github.com/tendermint/tendermint/issues/3809) Recover from application panics in `server/socket_server.go` to allow socket cleanup (@ruseinov)
- [p2p] [\#3664](https://github.com/tendermint/tendermint/issues/3664) p2p/conn: reuse buffer when write/read from secret connection(@guagualvcha)
- [p2p] [\#3834](https://github.com/tendermint/tendermint/issues/3834) Do not write 'Couldn't connect to any seeds' error log if there are no seeds in config file
- [rpc] [\#3076](https://github.com/tendermint/tendermint/issues/3076) Improve transaction search performance

### BUG FIXES:

- [p2p] [\#3644](https://github.com/tendermint/tendermint/issues/3644) Fix error logging for connection stop (@defunctzombie)
- [rpc] [\#3813](https://github.com/tendermint/tendermint/issues/3813) Return err if page is incorrect (less than 0 or greater than total pages)

## v0.32.1

*July 15, 2019*

Special thanks to external contributors on this release:
@ParthDesai, @climber73, @jim380, @ashleyvega

This release contains a minor enhancement to the ABCI and some breaking changes to our libs folder, namely:
- CheckTx requests include a `CheckTxType` enum that can be set to `Recheck` to indicate to the application that this transaction was already checked/validated and certain expensive operations (like checking signatures) can be skipped
- Removed various functions from `libs` pkgs

### BREAKING CHANGES:

- Go API

  -  [abci] [\#2127](https://github.com/tendermint/tendermint/issues/2127) The CheckTx and DeliverTx methods in the ABCI `Application` interface now take structs  as arguments (RequestCheckTx and RequestDeliverTx, respectively), instead of just the raw tx bytes. This allows more information to be passed to these methods, for instance, indicating whether a tx has already been checked.
  - [libs] Remove unused `db/debugDB` and `common/colors.go` & `errors/errors.go` files (@marbar3778)
  - [libs] [\#2432](https://github.com/tendermint/tendermint/issues/2432) Remove unused `common/heap.go` file (@marbar3778)
  - [libs] Remove unused `date.go`, `io.go`. Remove `GoPath()`, `Prompt()` and `IsDirEmpty()` functions from `os.go` (@marbar3778)
  - [libs] Remove unused `FailRand()` func and minor clean up to `fail.go`(@marbar3778)

### FEATURES:

- [node] Add variadic argument to `NewNode` to support functional options, allowing the Node to be more easily customized.
- [node][\#3730](https://github.com/tendermint/tendermint/pull/3730) Add `CustomReactors` option to `NewNode` allowing caller to pass
  custom reactors to run inside Tendermint node (@ParthDesai)
- [abci] [\#2127](https://github.com/tendermint/tendermint/issues/2127)RequestCheckTx has a new field, `CheckTxType`, which can take values of `CheckTxType_New` and `CheckTxType_Recheck`, indicating whether this is a new tx being checked for the first time or whether this tx is being rechecked after a block commit. This allows applications to skip certain expensive operations, like signature checking, if they've already been done once. see [docs](https://github.com/tendermint/tendermint/blob/eddb433d7c082efbeaf8974413a36641519ee895/docs/spec/abci/apps.md#mempool-connection)

### IMPROVEMENTS:

- [rpc] [\#3700](https://github.com/tendermint/tendermint/issues/3700) Make possible to set absolute paths for TLS cert and key (@climber73)
- [abci] [\#3513](https://github.com/tendermint/tendermint/issues/3513) Call the reqRes callback after the resCb so they always happen in the same order

### BUG FIXES:

- [p2p] [\#3338](https://github.com/tendermint/tendermint/issues/3338) Prevent "sent next PEX request too soon" errors by not calling
  ensurePeers outside of ensurePeersRoutine
- [behaviour] [\3772](https://github.com/tendermint/tendermint/pull/3772) Return correct reason in MessageOutOfOrder (@jim380)
- [config] [\#3723](https://github.com/tendermint/tendermint/issues/3723) Add consensus_params to testnet config generation; document time_iota_ms (@ashleyvega)


## v0.32.0

*June 25, 2019*

Special thanks to external contributors on this release:
@needkane, @SebastianElvis, @andynog, @Yawning, @wooparadog

This release contains breaking changes to our build and release processes, ABCI,
and the RPC, namely:
- Use Go modules instead of dep
- Bring active development to the `master` Github branch
- ABCI Tags are now Events - see
  [docs](https://github.com/tendermint/tendermint/blob/60827f75623b92eff132dc0eff5b49d2025c591e/docs/spec/abci/abci.md#events)
- Bind RPC to localhost by default, not to the public interface [UPGRADING/RPC_Changes](./UPGRADING.md#rpc_changes)

### BREAKING CHANGES:

* CLI/RPC/Config
  - [cli] [\#3613](https://github.com/tendermint/tendermint/issues/3613) Switch from golang/dep to Go Modules to resolve dependencies:
    It is recommended to switch to Go Modules if your project has tendermint as
    a dependency. Read more on Modules here:
    https://github.com/golang/go/wiki/Modules
  - [config] [\#3632](https://github.com/tendermint/tendermint/pull/3632) Removed `leveldb` as generic
    option for `db_backend`. Must be `goleveldb` or `cleveldb`.
  - [rpc] [\#3616](https://github.com/tendermint/tendermint/issues/3616) Fix field names for `/block_results` response (eg. `results.DeliverTx`
    -> `results.deliver_tx`). See docs for details.
  - [rpc] [\#3724](https://github.com/tendermint/tendermint/issues/3724) RPC now binds to `127.0.0.1` by default instead of `0.0.0.0`

* Apps
  - [abci] [\#1859](https://github.com/tendermint/tendermint/issues/1859) `ResponseCheckTx`, `ResponseDeliverTx`, `ResponseBeginBlock`,
    and `ResponseEndBlock` now include `Events` instead of `Tags`. Each `Event`
    contains a `type` and a list of `attributes` (list of key-value pairs)
    allowing for inclusion of multiple distinct events in each response.

* Go API
  - [abci] [\#3193](https://github.com/tendermint/tendermint/issues/3193) Use RequestDeliverTx and RequestCheckTx in the ABCI
    Application interface
  - [libs/db] [\#3632](https://github.com/tendermint/tendermint/pull/3632) Removed deprecated `LevelDBBackend` const
    If you have `db_backend` set to `leveldb` in your config file, please
    change it to `goleveldb` or `cleveldb`.
  - [p2p] [\#3521](https://github.com/tendermint/tendermint/issues/3521) Remove NewNetAddressStringWithOptionalID

* Blockchain Protocol

* P2P Protocol

### FEATURES:

### IMPROVEMENTS:
- [abci/examples] [\#3659](https://github.com/tendermint/tendermint/issues/3659) Change validator update tx format in the `persistent_kvstore` to use base64 for pubkeys instead of hex (@needkane)
- [consensus] [\#3656](https://github.com/tendermint/tendermint/issues/3656) Exit if SwitchToConsensus fails
- [p2p] [\#3666](https://github.com/tendermint/tendermint/issues/3666) Add per channel telemetry to improve reactor observability
- [rpc] [\#3686](https://github.com/tendermint/tendermint/pull/3686) `HTTPClient#Call` returns wrapped errors, so a caller could use `errors.Cause` to retrieve an error code. (@wooparadog)

### BUG FIXES:
- [libs/db] [\#3717](https://github.com/tendermint/tendermint/issues/3717) Fixed the BoltDB backend's Batch.Delete implementation (@Yawning)
- [libs/db] [\#3718](https://github.com/tendermint/tendermint/issues/3718) Fixed the BoltDB backend's Get and Iterator implementation (@Yawning)
- [node] [\#3716](https://github.com/tendermint/tendermint/issues/3716) Fix a bug where `nil` is recorded as node's address
- [node] [\#3741](https://github.com/tendermint/tendermint/issues/3741) Fix profiler blocking the entire node

*Tendermint 0.31 release series has reached End-Of-Life and is no longer supported.*

## v0.31.12

*April 6, 2020*

This security release fixes:

### Denial of Service 1

Tendermint 0.33.2 and earlier does not limit the number of P2P connection requests.
For each p2p connection, Tendermint allocates ~0.5MB. Even though this
memory is garbage collected once the connection is terminated (due to duplicate
IP or reaching a maximum number of inbound peers), temporary memory spikes can
lead to OOM (Out-Of-Memory) exceptions.

Tendermint 0.33.3, 0.32.10, and 0.31.12 limit the total number of P2P incoming
connection requests to to `p2p.max_num_inbound_peers +
len(p2p.unconditional_peer_ids)`.

Notes:

- Tendermint does not rate limit P2P connection requests per IP (an attacker
  can saturate all the inbound slots);
- Tendermint does not rate limit HTTP(S) requests. If you expose any RPC
  endpoints to the public, please make sure to put in place some protection
  (https://www.nginx.com/blog/rate-limiting-nginx/). We may implement this in
  the future ([\#1696](https://github.com/tendermint/tendermint/issues/1696)).

### Denial of Service 2

Tendermint 0.33.2 and earlier does not reclaim `activeID` of a peer after it's
removed in `Mempool` reactor. This does not happen all the time. It only
happens when a connection fails (for any reason) before the Peer is created and
added to all reactors. `RemovePeer` is therefore called before `AddPeer`, which
leads to always growing memory (`activeIDs` map). The `activeIDs` map has a
maximum size of 65535 and the node will panic if this map reaches the maximum.
An attacker can create a lot of connection attempts (exploiting Denial of
Service 1), which ultimately will lead to the node panicking.

Tendermint 0.33.3, 0.32.10, and 0.31.12 claim `activeID` for a peer in `InitPeer`,
which is executed before `MConnection` is started.

Notes:

- `InitPeer` function was added to all reactors to combat a similar issue -
  [\#3338](https://github.com/tendermint/tendermint/issues/3338);
- Denial of Service 2 is independent of Denial of Service 1 and can be executed
  without it.

**All clients are recommended to upgrade**

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for finding
and reporting this.


### SECURITY:

- [mempool] Reserve IDs in InitPeer instead of AddPeer (@tessr)
- [p2p] Limit the number of incoming connections (@melekes)

## v0.31.11

*October 18, 2019*

This security release fixes a vulnerability found in the `consensus` package,
where an attacker could construct a `BlockPartMessage` message in such a way
that it will lead to consensus failure. A few similar issues have been
identified and fixed here.

**All clients are recommended to upgrade**

Special thanks to [elvishacker](https://hackerone.com/elvishacker) for finding
and reporting this.


### BREAKING CHANGES:

- Go API
  - [consensus] Modify `WAL#Write` and `WAL#WriteSync` to return an error if
    they fail to write a message

### SECURITY:

- [consensus] Validate incoming messages more throughly

## v0.31.10

*October 8, 2019*

The previous patch was insufficient because the attacker could still find a way
to submit a `nil` pubkey by constructing a `PubKeyMultisigThreshold` pubkey
with `nil` subpubkeys for example.

This release provides multiple fixes, which include recovering from panics when
accepting new peers and only allowing `ed25519` pubkeys.

**All clients are recommended to upgrade**

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for pointing
this out.


### SECURITY:

- [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Only allow ed25519 pubkeys when connecting

## v0.31.9

*October 1, 2019*

This release fixes a major security vulnerability found in the `p2p` package.
All clients are recommended to upgrade. See
[\#4030](https://github.com/tendermint/tendermint/issues/4030) for details.

Special thanks to [fudongbai](https://hackerone.com/fudongbai) for discovering
and reporting this issue.


### SECURITY:

- [p2p] [\#4030](https://github.com/tendermint/tendermint/issues/4030) Fix for panic on nil public key send to a peer

### BUG FIXES:

- [node] [\#3716](https://github.com/tendermint/tendermint/issues/3716) Fix a bug where `nil` is recorded as node's address
- [node] [\#3741](https://github.com/tendermint/tendermint/issues/3741) Fix profiler blocking the entire node

## v0.31.8

*July 29, 2019*

This releases fixes one bug in the PEX reactor and adds a `recover` to the Go's
ABCI server, which allows it to properly cleanup.

### IMPROVEMENTS:
- [abci] [\#3809](https://github.com/tendermint/tendermint/issues/3809) Recover from application panics in `server/socket_server.go` to allow socket cleanup (@ruseinov)

### BUG FIXES:
- [p2p] [\#3338](https://github.com/tendermint/tendermint/issues/3338) Prevent "sent next PEX request too soon" errors by not calling
  ensurePeers outside of ensurePeersRoutine

## v0.31.7

*June 3, 2019*

This releases fixes a regression in the mempool introduced in v0.31.6.
The regression caused the invalid committed txs to be proposed in blocks over and
over again.

### BUG FIXES:
- [mempool] [\#3699](https://github.com/tendermint/tendermint/issues/3699) Remove all committed txs from the mempool.
    This reverts the change from v0.31.6 where we only remove valid txs from the mempool.
    Note this means malicious proposals can cause txs to be dropped from the
    mempools of other nodes by including them in blocks before they are valid.
    See [\#3322](https://github.com/tendermint/tendermint/issues/3322).

## v0.31.6

*May 31st, 2019*

This release contains many fixes and improvements, primarily for p2p functionality.
It also fixes a security issue in the mempool package.

With this release, Tendermint now supports [boltdb](https://github.com/etcd-io/bbolt), although
in experimental mode. Feel free to try and report to us any findings/issues.
Note also that the build tags for compiling CLevelDB have changed.

Special thanks to external contributors on this release:
@guagualvcha, @james-ray, @gregdhill, @climber73, @yutianwu,
@carlosflrs, @defunctzombie, @leoluk, @needkane, @CrocdileChan

### BREAKING CHANGES:

* Go API
  - [libs/common] Removed deprecated `PanicSanity`, `PanicCrisis`,
    `PanicConsensus` and `PanicQ`
  - [mempool, state] [\#2659](https://github.com/tendermint/tendermint/issues/2659) `Mempool` now an interface that lives in the mempool package.
    See issue and PR for more details.
  - [p2p] [\#3346](https://github.com/tendermint/tendermint/issues/3346) `Reactor#InitPeer` method is added to `Reactor` interface
  - [types] [\#1648](https://github.com/tendermint/tendermint/issues/1648) `Commit#VoteSignBytes` signature was changed

### FEATURES:
- [node] [\#2659](https://github.com/tendermint/tendermint/issues/2659) Add `node.Mempool()` method, which allows you to access mempool
- [libs/db] [\#3604](https://github.com/tendermint/tendermint/pull/3604) Add experimental support for bolt db (etcd's fork of bolt) (@CrocdileChan)

### IMPROVEMENTS:
- [cli] [\#3585](https://github.com/tendermint/tendermint/issues/3585) Add `--keep-addr-book` option to `unsafe_reset_all` cmd to not
  clear the address book (@climber73)
- [cli] [\#3160](https://github.com/tendermint/tendermint/issues/3160) Add
  `--config=<path-to-config>` option to `testnet` cmd (@gregdhill)
- [cli] [\#3661](https://github.com/tendermint/tendermint/pull/3661) Add
  `--hostname-suffix`, `--hostname` and `--random-monikers` options to `testnet`
  cmd for greater peer address/identity generation flexibility.
- [crypto] [\#3672](https://github.com/tendermint/tendermint/issues/3672) Return more info in the `AddSignatureFromPubKey` error
- [cs/replay] [\#3460](https://github.com/tendermint/tendermint/issues/3460) Check appHash for each block
- [libs/db] [\#3611](https://github.com/tendermint/tendermint/issues/3611) Conditional compilation
  * Use `cleveldb` tag instead of `gcc` to compile Tendermint with CLevelDB or
    use `make build_c` / `make install_c` (full instructions can be found at
    https://docs.tendermint.com/master/introduction/install.html#compile-with-cleveldb-support)
  * Use `boltdb` tag to compile Tendermint with bolt db
- [node] [\#3362](https://github.com/tendermint/tendermint/issues/3362) Return an error if `persistent_peers` list is invalid (except
  when IP lookup fails)
- [p2p] [\#3463](https://github.com/tendermint/tendermint/pull/3463) Do not log "Can't add peer's address to addrbook" error for a private peer (@guagualvcha)
- [p2p] [\#3531](https://github.com/tendermint/tendermint/issues/3531) Terminate session on nonce wrapping (@climber73)
- [pex] [\#3647](https://github.com/tendermint/tendermint/pull/3647) Dial seeds, if any, instead of crawling peers first (@defunctzombie)
- [rpc] [\#3534](https://github.com/tendermint/tendermint/pull/3534) Add support for batched requests/responses in JSON RPC
- [rpc] [\#3362](https://github.com/tendermint/tendermint/issues/3362) `/dial_seeds` & `/dial_peers` return errors if addresses are
  incorrect (except when IP lookup fails)

### BUG FIXES:
- [consensus] [\#3067](https://github.com/tendermint/tendermint/issues/3067) Fix replay from appHeight==0 with validator set changes (@james-ray)
- [consensus] [\#3304](https://github.com/tendermint/tendermint/issues/3304) Create a peer state in consensus reactor before the peer
  is started (@guagualvcha)
- [lite] [\#3669](https://github.com/tendermint/tendermint/issues/3669) Add context parameter to RPC Handlers in proxy routes (@yutianwu)
- [mempool] [\#3322](https://github.com/tendermint/tendermint/issues/3322) When a block is committed, only remove committed txs from the mempool
that were valid (ie. `ResponseDeliverTx.Code == 0`)
- [p2p] [\#3338](https://github.com/tendermint/tendermint/issues/3338) Ensure `RemovePeer` is always called before `InitPeer` (upon a peer
  reconnecting to our node)
- [p2p] [\#3532](https://github.com/tendermint/tendermint/issues/3532) Limit the number of attempts to connect to a peer in seed mode
  to 16 (as a result, the node will stop retrying after a 35 hours time window)
- [p2p] [\#3362](https://github.com/tendermint/tendermint/issues/3362) Allow inbound peers to be persistent, including for seed nodes.
- [pex] [\#3603](https://github.com/tendermint/tendermint/pull/3603) Dial seeds when addrbook needs more addresses (@defunctzombie)

### OTHERS:
- [networks] fixes ansible integration script (@carlosflrs)

## v0.31.5

*April 16th, 2019*

This release fixes a regression from v0.31.4 where, in existing chains that
were upgraded, `/validators` could return an empty validator set. This is true
for almost all heights, given the validator set remains the same.

Special thanks to external contributors on this release:
@brapse, @guagualvcha, @dongsam, @phucc

### IMPROVEMENTS:

- [libs/common] `CMap`: slight optimization in `Keys()` and `Values()` (@phucc)
- [gitignore] gitignore: add .vendor-new (@dongsam)

### BUG FIXES:

- [state] [\#3537](https://github.com/tendermint/tendermint/pull/3537#issuecomment-482711833)
  `LoadValidators`: do not return an empty validator set
- [blockchain] [\#3457](https://github.com/tendermint/tendermint/issues/3457)
  Fix "peer did not send us anything" in `fast_sync` mode when under high pressure

## v0.31.4

*April 12th, 2019*

This release fixes a regression from v0.31.3 which used the peer's `SocketAddr` to add the peer to
the address book. This swallowed the peer's self-reported port which is important in case of reconnect.
It brings back `NetAddress()` to `NodeInfo` and uses it instead of `SocketAddr` for adding peers.
Additionally, it improves response time on the `/validators` or `/status` RPC endpoints.
As a side-effect it makes these RPC endpoint more difficult to DoS and fixes a performance degradation in `ExecCommitBlock`.
Also, it contains an [ADR](https://github.com/tendermint/tendermint/pull/3539) that proposes decoupling the
responsibility for peer behaviour from the `p2p.Switch` (by @brapse).

Special thanks to external contributors on this release:
@brapse, @guagualvcha, @mydring

### IMPROVEMENTS:

- [p2p] [\#3463](https://github.com/tendermint/tendermint/pull/3463) Do not log "Can't add peer's address to addrbook" error for a private peer
- [p2p] [\#3547](https://github.com/tendermint/tendermint/pull/3547) Fix a couple of annoying typos (@mdyring)

### BUG FIXES:

- [docs] [\#3514](https://github.com/tendermint/tendermint/issues/3514) Fix block.Header.Time description (@melekes)
- [p2p] [\#2716](https://github.com/tendermint/tendermint/issues/2716) Check if we're already connected to peer right before dialing it (@melekes)
- [p2p] [\#3545](https://github.com/tendermint/tendermint/issues/3545) Add back `NetAddress()` to `NodeInfo` and use it instead of peer's `SocketAddr()` when adding a peer to the `PEXReactor` (potential fix for [\#3532](https://github.com/tendermint/tendermint/issues/3532))
- [state] [\#3438](https://github.com/tendermint/tendermint/pull/3438)
  Persist validators every 100000 blocks even if no changes to the set
  occurred (@guagualvcha). This
  1) Prevents possible DoS attack using `/validators` or `/status` RPC
  endpoints. Before response time was growing linearly with height if no
  changes were made to the validator set.
  2) Fixes performance degradation in `ExecCommitBlock` where we call
  `LoadValidators` for each `Evidence` in the block.

## v0.31.3

*April 1st, 2019*

This release includes two security sensitive fixes: it ensures generated private
keys are valid, and it prevents certain DNS lookups that would cause the node to
panic if the lookup failed.

### BREAKING CHANGES:
* Go API
  - [crypto/secp256k1] [\#3439](https://github.com/tendermint/tendermint/issues/3439)
    The `secp256k1.GenPrivKeySecp256k1` function has changed to guarantee that it returns a valid key, which means it
    will return a different private key than in previous versions for the same secret.

### BUG FIXES:

- [crypto/secp256k1] [\#3439](https://github.com/tendermint/tendermint/issues/3439)
    Ensure generated private keys are valid by randomly sampling until a valid key is found.
    Previously, it was possible (though rare!) to generate keys that exceeded the curve order.
    Such keys would lead to invalid signatures.
- [p2p] [\#3522](https://github.com/tendermint/tendermint/issues/3522) Memoize
  socket address in peer connections to avoid DNS lookups. Previously, failed
  DNS lookups could cause the node to panic.

## v0.31.2

*March 30th, 2019*

This release fixes a regression from v0.31.1 where Tendermint panics under
mempool load for external ABCI apps.

Special thanks to external contributors on this release:
@guagualvcha

### BREAKING CHANGES:

* CLI/RPC/Config

* Apps

* Go API
  - [libs/autofile] [\#3504](https://github.com/tendermint/tendermint/issues/3504) Remove unused code in autofile package. Deleted functions: `Group.Search`, `Group.FindLast`, `GroupReader.ReadLine`, `GroupReader.PushLine`, `MakeSimpleSearchFunc` (@guagualvcha)

* Blockchain Protocol

* P2P Protocol

### FEATURES:

### IMPROVEMENTS:

- [circle] [\#3497](https://github.com/tendermint/tendermint/issues/3497) Move release management to CircleCI

### BUG FIXES:

- [mempool] [\#3512](https://github.com/tendermint/tendermint/issues/3512) Fix panic from concurrent access to txsMap, a regression for external ABCI apps introduced in v0.31.1

## v0.31.1

*March 27th, 2019*

This release contains a major improvement for the mempool that reduce the amount of sent data by about 30%
(see some numbers below).
It also fixes a memory leak in the mempool and adds TLS support to the RPC server by providing a certificate and key in the config.

Special thanks to external contributors on this release:
@brapse, @guagualvcha, @HaoyangLiu, @needkane, @TraceBundy

### BREAKING CHANGES:

* CLI/RPC/Config

* Apps

* Go API
  - [crypto] [\#3426](https://github.com/tendermint/tendermint/pull/3426) Remove `Ripemd160` helper method (@needkane)
  - [libs/common] [\#3429](https://github.com/tendermint/tendermint/pull/3429) Remove `RepeatTimer` (also `TimerMaker` and `Ticker` interface)
  - [rpc/client] [\#3458](https://github.com/tendermint/tendermint/issues/3458) Include `NetworkClient` interface into `Client` interface
  - [types] [\#3448](https://github.com/tendermint/tendermint/issues/3448) Remove method `PB2TM.ConsensusParams`

* Blockchain Protocol

* P2P Protocol

### FEATURES:

 - [rpc] [\#3419](https://github.com/tendermint/tendermint/issues/3419) Start HTTPS server if `rpc.tls_cert_file` and `rpc.tls_key_file` are provided in the config (@guagualvcha)

### IMPROVEMENTS:

- [docs] [\#3140](https://github.com/tendermint/tendermint/issues/3140) Formalize proposer election algorithm properties
- [docs] [\#3482](https://github.com/tendermint/tendermint/issues/3482) Fix broken links (@brapse)
- [mempool] [\#2778](https://github.com/tendermint/tendermint/issues/2778) No longer send txs back to peers who sent it to you.
Also, limit to 65536 active peers.
This vastly improves the bandwidth consumption of nodes.
For instance, for a 4 node localnet, in a test sending 250byte txs for 120 sec. at 500 txs/sec (total of 15MB):
  - total bytes received from 1st node:
     - before: 42793967 (43MB)
     - after: 30003256 (30MB)
  - total bytes sent to 1st node:
     - before: 30569339 (30MB)
     - after: 19304964 (19MB)
- [p2p] [\#3475](https://github.com/tendermint/tendermint/issues/3475) Simplify `GetSelectionWithBias` for addressbook (@guagualvcha)
- [rpc/lib/client] [\#3430](https://github.com/tendermint/tendermint/issues/3430) Disable compression for HTTP client to prevent GZIP-bomb DoS attacks (@guagualvcha)

### BUG FIXES:

- [blockchain] [\#2699](https://github.com/tendermint/tendermint/issues/2699) Update the maxHeight when a peer is removed
- [mempool] [\#3478](https://github.com/tendermint/tendermint/issues/3478) Fix memory-leak related to `broadcastTxRoutine` (@HaoyangLiu)


## v0.31.0

*March 16th, 2019*

Special thanks to external contributors on this release:
@danil-lashin, @guagualvcha, @siburu, @silasdavis, @srmo, @Stumble, @svenstaro

This release is primarily about the new pubsub implementation, dubbed `pubsub 2.0`, and related changes,
like configurable limits on the number of active RPC subscriptions at a time (`max_subscription_clients`).
Pubsub 2.0 is an improved version of the older pubsub that is non-blocking and has a nicer API.
Note the improved pubsub API also resulted in some improvements to the HTTPClient interface and the API for WebSocket subscriptions.
This release also adds a configurable limit to the mempool size (`max_txs_bytes`, default 1GB)
and a configurable timeout for the `/broadcast_tx_commit` endpoint.

See the [v0.31.0
Milestone](https://github.com/tendermint/tendermint/milestone/19?closed=1) for
more details.


### BREAKING CHANGES:

* CLI/RPC/Config
  - [config] [\#2920](https://github.com/tendermint/tendermint/issues/2920) Remove `consensus.blocktime_iota` parameter
  - [rpc] [\#3227](https://github.com/tendermint/tendermint/issues/3227) New PubSub design does not block on clients when publishing
    messages. Slow clients may miss messages and receive an error, terminating
    the subscription.
  - [rpc] [\#3269](https://github.com/tendermint/tendermint/issues/2826) Limit number of unique clientIDs with open subscriptions. Configurable via `rpc.max_subscription_clients`
  - [rpc] [\#3269](https://github.com/tendermint/tendermint/issues/2826) Limit number of unique queries a given client can subscribe to at once. Configurable via `rpc.max_subscriptions_per_client`.
  - [rpc] [\#3435](https://github.com/tendermint/tendermint/issues/3435) Default ReadTimeout and WriteTimeout changed to 10s. WriteTimeout can increased by setting `rpc.timeout_broadcast_tx_commit` in the config.
  - [rpc/client] [\#3269](https://github.com/tendermint/tendermint/issues/3269) Update `EventsClient` interface to reflect new pubsub/eventBus API [ADR-33](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-033-pubsub.md). This includes `Subscribe`, `Unsubscribe`, and `UnsubscribeAll` methods.

* Apps
  - [abci] [\#3403](https://github.com/tendermint/tendermint/issues/3403) Remove `time_iota_ms` from BlockParams. This is a
    ConsensusParam but need not be exposed to the app for now.
  - [abci] [\#2920](https://github.com/tendermint/tendermint/issues/2920) Rename `consensus_params.block_size` to `consensus_params.block` in ABCI ConsensusParams

* Go API
  - [libs/common] TrapSignal accepts logger as a first parameter and does not block anymore
    * previously it was dumping "captured ..." msg to os.Stdout
    * TrapSignal should not be responsible for blocking thread of execution
  - [libs/db] [\#3397](https://github.com/tendermint/tendermint/pull/3397) Add possibility to `Close()` `Batch` to prevent memory leak when using ClevelDB. (@Stumble)
  - [types] [\#3354](https://github.com/tendermint/tendermint/issues/3354) Remove RoundState from EventDataRoundState
  - [rpc] [\#3435](https://github.com/tendermint/tendermint/issues/3435) `StartHTTPServer` / `StartHTTPAndTLSServer` now require a Config (use `rpcserver.DefaultConfig`)

* Blockchain Protocol

* P2P Protocol

### FEATURES:
- [config] [\#3269](https://github.com/tendermint/tendermint/issues/2826) New configuration values for controlling RPC subscriptions:
    - `rpc.max_subscription_clients` sets the maximum number of unique clients
      with open subscriptions
    - `rpc.max_subscriptions_per_client`sets the maximum number of unique
      subscriptions from a given client
    - `rpc.timeout_broadcast_tx_commit` sets the time to wait for a tx to be committed during `/broadcast_tx_commit`
- [types] [\#2920](https://github.com/tendermint/tendermint/issues/2920) Add `time_iota_ms` to block's consensus parameters (not exposed to the application)
- [lite] [\#3269](https://github.com/tendermint/tendermint/issues/3269) Add `/unsubscribe_all` endpoint to unsubscribe from all events
- [mempool] [\#3079](https://github.com/tendermint/tendermint/issues/3079) Bound mempool memory usage via the `mempool.max_txs_bytes` configuration value. Set to 1GB by default. The mempool's current `txs_total_bytes` is exposed via `total_bytes` field in
  `/num_unconfirmed_txs` and `/unconfirmed_txs` RPC endpoints.

### IMPROVEMENTS:
- [all] [\#3385](https://github.com/tendermint/tendermint/issues/3385), [\#3386](https://github.com/tendermint/tendermint/issues/3386) Various linting improvements
- [crypto] [\#3371](https://github.com/tendermint/tendermint/issues/3371) Copy in secp256k1 package from go-ethereum instead of importing
  go-ethereum (@silasdavis)
- [deps] [\#3382](https://github.com/tendermint/tendermint/issues/3382) Don't pin repos without releases
- [deps] [\#3357](https://github.com/tendermint/tendermint/issues/3357), [\#3389](https://github.com/tendermint/tendermint/issues/3389), [\#3392](https://github.com/tendermint/tendermint/issues/3392) Update gogo/protobuf, golang/protobuf, levigo, golang.org/x/crypto
- [libs/common] [\#3238](https://github.com/tendermint/tendermint/issues/3238) exit with zero (0) code upon receiving SIGTERM/SIGINT
- [libs/db] [\#3378](https://github.com/tendermint/tendermint/issues/3378) CLevelDB#Stats now returns the following properties:
  - leveldb.num-files-at-level{n}
  - leveldb.stats
  - leveldb.sstables
  - leveldb.blockpool
  - leveldb.cachedblock
  - leveldb.openedtables
  - leveldb.alivesnaps
  - leveldb.aliveiters
- [privval] [\#3351](https://github.com/tendermint/tendermint/pull/3351) First part of larger refactoring that clarifies and separates concerns in the privval package.

### BUG FIXES:
- [blockchain] [\#3358](https://github.com/tendermint/tendermint/pull/3358) Fix timer leak in `BlockPool` (@guagualvcha)
- [cmd] [\#3408](https://github.com/tendermint/tendermint/issues/3408) Fix `testnet` command's panic when creating non-validator configs (using `--n` flag) (@srmo)
- [libs/db/remotedb/grpcdb] [\#3402](https://github.com/tendermint/tendermint/issues/3402) Close Iterator/ReverseIterator after use
- [libs/pubsub] [\#951](https://github.com/tendermint/tendermint/issues/951), [\#1880](https://github.com/tendermint/tendermint/issues/1880) Use non-blocking send when dispatching messages [ADR-33](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-033-pubsub.md)
- [lite] [\#3364](https://github.com/tendermint/tendermint/issues/3364) Fix `/validators` and `/abci_query` proxy endpoints
  (@guagualvcha)
- [p2p/conn] [\#3347](https://github.com/tendermint/tendermint/issues/3347) Reject all-zero shared secrets in the Diffie-Hellman step of secret-connection
- [p2p] [\#3369](https://github.com/tendermint/tendermint/issues/3369) Do not panic when filter times out
- [p2p] [\#3359](https://github.com/tendermint/tendermint/pull/3359) Fix reconnecting report duplicate ID error due to race condition between adding peer to peerSet and starting it (@guagualvcha)

## v0.30.2

*March 10th, 2019*

This release fixes a CLevelDB memory leak. It was happening because we were not
closing the WriteBatch object after use. See [levigo's
godoc](https://godoc.org/github.com/jmhodges/levigo#WriteBatch.Close) for the
Close method. Special thanks goes to @Stumble who both reported an issue in
[cosmos-sdk](https://github.com/cosmos/cosmos-sdk/issues/3842) and provided a
fix here.

### BREAKING CHANGES:

* Go API
  - [libs/db] [\#3842](https://github.com/cosmos/cosmos-sdk/issues/3842) Add Close() method to Batch interface (@Stumble)

### BUG FIXES:
- [libs/db] [\#3842](https://github.com/cosmos/cosmos-sdk/issues/3842) Fix CLevelDB memory leak (@Stumble)

## v0.30.1

*February 20th, 2019*

This release fixes a consensus halt and a DataCorruptionError after restart
discovered in `game_of_stakes_6`. It also fixes a security issue in the p2p
handshake by authenticating the NetAddress.ID of the peer we're dialing.

### IMPROVEMENTS:

* [config] [\#3291](https://github.com/tendermint/tendermint/issues/3291) Make
  config.ResetTestRootWithChainID() create concurrency-safe test directories.

### BUG FIXES:

* [consensus] [\#3295](https://github.com/tendermint/tendermint/issues/3295)
  Flush WAL on stop to prevent data corruption during graceful shutdown.
* [consensus] [\#3302](https://github.com/tendermint/tendermint/issues/3302)
  Fix possible halt by resetting TriggeredTimeoutPrecommit before starting next height.
* [rpc] [\#3251](https://github.com/tendermint/tendermint/issues/3251) Fix
  `/net_info#peers#remote_ip` format. New format spec:
  * dotted decimal ("192.0.2.1"), if ip is an IPv4 or IP4-mapped IPv6 address
  * IPv6 ("2001:db8::1"), if ip is a valid IPv6 address
* [cmd] [\#3314](https://github.com/tendermint/tendermint/issues/3314) Return
  an error on `show_validator` when the private validator file does not exist.
* [p2p] [\#3010](https://github.com/tendermint/tendermint/issues/3010#issuecomment-464287627)
  Authenticate a peer against its NetAddress.ID when dialing.

## v0.30.0

*February 8th, 2019*

This release fixes yet another issue with the proposer selection algorithm.
We hope it's the last one, but we won't be surprised if it's not.
We plan to one day expose the selection algorithm more directly to
the application ([\#3285](https://github.com/tendermint/tendermint/issues/3285)), and even to support randomness ([\#763](https://github.com/tendermint/tendermint/issues/763)).
For more, see issues marked
[proposer-selection](https://github.com/tendermint/tendermint/labels/proposer-selection).

This release also includes a fix to prevent Tendermint from including the same
piece of evidence in more than one block. This issue was reported by @chengwenxi in our
[bug bounty program](https://hackerone.com/tendermint).

### BREAKING CHANGES:

* Apps
  - [state] [\#3222](https://github.com/tendermint/tendermint/issues/3222)
    Duplicate updates for the same validator are forbidden. Apps must ensure
    that a given `ResponseEndBlock.ValidatorUpdates` contains only one entry per pubkey.

* Go API
  - [types] [\#3222](https://github.com/tendermint/tendermint/issues/3222)
    Remove `Add` and `Update` methods from `ValidatorSet` in favor of new
    `UpdateWithChangeSet`. This allows updates to be applied as a set, instead of
    one at a time.

* Block Protocol
  - [state] [\#3286](https://github.com/tendermint/tendermint/issues/3286) Blocks that include already committed evidence are invalid.

* P2P Protocol
  - [consensus] [\#3222](https://github.com/tendermint/tendermint/issues/3222)
    Validator updates are applied as a set, instead of one at a time, thus
    impacting the proposer priority calculation. This ensures that the proposer
    selection algorithm does not depend on the order of updates in
    `ResponseEndBlock.ValidatorUpdates`.

### IMPROVEMENTS:
- [crypto] [\#3279](https://github.com/tendermint/tendermint/issues/3279) Use `btcec.S256().N` directly instead of hard coding a copy.

### BUG FIXES:
- [state] [\#3222](https://github.com/tendermint/tendermint/issues/3222) Fix validator set updates so they are applied as a set, rather
  than one at a time. This makes the proposer selection algorithm independent of
  the order of updates in `ResponseEndBlock.ValidatorUpdates`.
- [evidence] [\#3286](https://github.com/tendermint/tendermint/issues/3286) Don't add committed evidence to evidence pool.

## v0.29.2

*February 7th, 2019*

Special thanks to external contributors on this release:
@ackratos, @rickyyangz

**Note**: This release contains security sensitive patches in the `p2p` and
`crypto` packages:
- p2p:
  - Partial fix for MITM attacks on the p2p connection. MITM conditions may
    still exist. See [\#3010](https://github.com/tendermint/tendermint/issues/3010).
- crypto:
  - Eliminate our fork of `btcd` and use the `btcd/btcec` library directly for
    native secp256k1 signing. Note we still modify the signature encoding to
    prevent malleability.
  - Support the libsecp256k1 library via CGo through the `go-ethereum/crypto/secp256k1` package.
  - Eliminate MixEntropy functions

### BREAKING CHANGES:

* Go API
  - [crypto] [\#3278](https://github.com/tendermint/tendermint/issues/3278) Remove
    MixEntropy functions
  - [types] [\#3245](https://github.com/tendermint/tendermint/issues/3245) Commit uses `type CommitSig Vote` instead of `Vote` directly.
    In preparation for removing redundant fields from the commit [\#1648](https://github.com/tendermint/tendermint/issues/1648)

### IMPROVEMENTS:
- [consensus] [\#3246](https://github.com/tendermint/tendermint/issues/3246) Better logging and notes on recovery for corrupted WAL file
- [crypto] [\#3163](https://github.com/tendermint/tendermint/issues/3163) Use ethereum's libsecp256k1 go-wrapper for signatures when cgo is available
- [crypto] [\#3162](https://github.com/tendermint/tendermint/issues/3162) Wrap btcd instead of forking it to keep up with fixes (used if cgo is not available)
- [makefile] [\#3233](https://github.com/tendermint/tendermint/issues/3233) Use golangci-lint instead of go-metalinter
- [tools] [\#3218](https://github.com/tendermint/tendermint/issues/3218) Add go-deadlock tool to help detect deadlocks
- [tools] [\#3106](https://github.com/tendermint/tendermint/issues/3106) Add tm-signer-harness test harness for remote signers
- [tests] [\#3258](https://github.com/tendermint/tendermint/issues/3258) Fixed a bunch of non-deterministic test failures

### BUG FIXES:
- [node] [\#3186](https://github.com/tendermint/tendermint/issues/3186) EventBus and indexerService should be started before first block (for replay last block on handshake) execution (@ackratos)
- [p2p] [\#3232](https://github.com/tendermint/tendermint/issues/3232) Fix infinite loop leading to addrbook deadlock for seed nodes
- [p2p] [\#3247](https://github.com/tendermint/tendermint/issues/3247) Fix panic in SeedMode when calling FlushStop and OnStop
  concurrently
- [p2p] [\#3040](https://github.com/tendermint/tendermint/issues/3040) Fix MITM on secret connection by checking low-order points
- [privval] [\#3258](https://github.com/tendermint/tendermint/issues/3258) Fix race between sign requests and ping requests in socket that was causing messages to be corrupted

## v0.29.1

*January 24, 2019*

Special thanks to external contributors on this release:
@infinytum, @gauthamzz

This release contains two important fixes: one for p2p layer where we sometimes
were not closing connections and one for consensus layer where consensus with
no empty blocks (`create_empty_blocks = false`) could halt.


### IMPROVEMENTS:
- [pex] [\#3037](https://github.com/tendermint/tendermint/issues/3037) Only log "Reached max attempts to dial" once
- [rpc] [\#3159](https://github.com/tendermint/tendermint/issues/3159) Expose
  `triggered_timeout_commit` in the `/dump_consensus_state`

### BUG FIXES:
- [consensus] [\#3199](https://github.com/tendermint/tendermint/issues/3199) Fix consensus halt with no empty blocks from not resetting triggeredTimeoutCommit
- [p2p] [\#2967](https://github.com/tendermint/tendermint/issues/2967) Fix file descriptor leak

## v0.29.0

*January 21, 2019*

Special thanks to external contributors on this release:
@bradyjoestar, @kunaldhariwal, @gauthamzz, @hrharder

This release is primarily about making some breaking changes to
the Block protocol version before Cosmos launch, and to fixing more issues
in the proposer selection algorithm discovered on Cosmos testnets.

The Block protocol changes include using a standard Merkle tree format (RFC 6962),
fixing some inconsistencies between field orders in Vote and Proposal structs,
and constraining the hash of the ConsensusParams to include only a few fields.

The proposer selection algorithm saw significant progress,
including a [formal proof by @cwgoes for the base-case in Idris](https://github.com/cwgoes/tm-proposer-idris)
and a [much more detailed specification (still in progress) by
@ancazamfir](https://github.com/tendermint/tendermint/pull/3140).

Fixes to the proposer selection algorithm include normalizing the proposer
priorities to mitigate the effects of large changes to the validator set.
That said, we just discovered [another bug](https://github.com/tendermint/tendermint/issues/3181),
which will be fixed in the next breaking release.

While we are trying to stabilize the Block protocol to preserve compatibility
with old chains, there may be some final changes yet to come before Cosmos
launch as we continue to audit and test the software.


### BREAKING CHANGES:

* CLI/RPC/Config

* Apps
  - [state] [\#3049](https://github.com/tendermint/tendermint/issues/3049) Total voting power of the validator set is upper bounded by
    `MaxInt64 / 8`. Apps must ensure they do not return changes to the validator
    set that cause this maximum to be exceeded.

* Go API
  - [node] [\#3082](https://github.com/tendermint/tendermint/issues/3082) MetricsProvider now requires you to pass a chain ID
  - [types] [\#2713](https://github.com/tendermint/tendermint/issues/2713) Rename `TxProof.LeafHash` to `TxProof.Leaf`
  - [crypto/merkle] [\#2713](https://github.com/tendermint/tendermint/issues/2713) `SimpleProof.Verify` takes a `leaf` instead of a
    `leafHash` and performs the hashing itself

* Blockchain Protocol
  * [crypto/merkle] [\#2713](https://github.com/tendermint/tendermint/issues/2713) Merkle trees now match the RFC 6962 specification
  * [types] [\#3078](https://github.com/tendermint/tendermint/issues/3078) Re-order Timestamp and BlockID in CanonicalVote so it's
    consistent with CanonicalProposal (BlockID comes
    first)
  * [types] [\#3165](https://github.com/tendermint/tendermint/issues/3165) Hash of ConsensusParams only includes BlockSize.MaxBytes and
    BlockSize.MaxGas

* P2P Protocol
  - [consensus] [\#3049](https://github.com/tendermint/tendermint/issues/3049) Normalize priorities to not exceed `2*TotalVotingPower` to mitigate unfair proposer selection
    heavily preferring earlier joined validators in the case of an early bonded large validator unbonding

### FEATURES:

### IMPROVEMENTS:
- [rpc] [\#3065](https://github.com/tendermint/tendermint/issues/3065) Return maxPerPage (100), not defaultPerPage (30) if `per_page` is greater than the max 100.
- [instrumentation] [\#3082](https://github.com/tendermint/tendermint/issues/3082) Add `chain_id` label for all metrics

### BUG FIXES:
- [crypto] [\#3164](https://github.com/tendermint/tendermint/issues/3164) Update `btcd` fork for rare signRFC6979 bug
- [lite] [\#3171](https://github.com/tendermint/tendermint/issues/3171) Fix verifying large validator set changes
- [log] [\#3125](https://github.com/tendermint/tendermint/issues/3125) Fix year format
- [mempool] [\#3168](https://github.com/tendermint/tendermint/issues/3168) Limit tx size to fit in the max reactor msg size
- [scripts] [\#3147](https://github.com/tendermint/tendermint/issues/3147) Fix json2wal for large block parts (@bradyjoestar)

## v0.28.1

*January 18th, 2019*

Special thanks to external contributors on this release:
@HaoyangLiu


### BUG FIXES:
- [consensus] Fix consensus halt from proposing blocks with too much evidence

## v0.28.0

*January 16th, 2019*

Special thanks to external contributors on this release:
@fmauricios, @gianfelipe93, @husio, @needkane, @srmo, @yutianwu

This release is primarily about upgrades to the `privval` system -
separating the `priv_validator.json` into distinct config and data files, and
refactoring the socket validator to support reconnections.

**Note:** Please backup your existing `priv_validator.json` before using this
version.

See [UPGRADING.md](UPGRADING.md) for more details.

### BREAKING CHANGES:

* CLI/RPC/Config
  - [cli] Removed `--proxy_app=dummy` option. Use `kvstore` (`persistent_kvstore`) instead.
  - [cli] Renamed `--proxy_app=nilapp` to `--proxy_app=noop`.
  - [config] [\#2992](https://github.com/tendermint/tendermint/issues/2992) `allow_duplicate_ip` is now set to false
  - [privval] [\#1181](https://github.com/tendermint/tendermint/issues/1181) Split `priv_validator.json` into immutable (`config/priv_validator_key.json`) and mutable (`data/priv_validator_state.json`) parts (@yutianwu)
  - [privval] [\#2926](https://github.com/tendermint/tendermint/issues/2926) Split up `PubKeyMsg` into `PubKeyRequest` and `PubKeyResponse` to be consistent with other message types
  - [privval] [\#2923](https://github.com/tendermint/tendermint/issues/2923) Listen for unix socket connections instead of dialing them

* Apps

* Go API
  - [types] [\#2981](https://github.com/tendermint/tendermint/issues/2981) Remove `PrivValidator.GetAddress()`

* Blockchain Protocol

* P2P Protocol

### FEATURES:
- [rpc] [\#3052](https://github.com/tendermint/tendermint/issues/3052) Include peer's remote IP in `/net_info`

### IMPROVEMENTS:
- [consensus] [\#3086](https://github.com/tendermint/tendermint/issues/3086) Log peerID on ignored votes (@srmo)
- [docs] [\#3061](https://github.com/tendermint/tendermint/issues/3061) Added specification for signing consensus msgs at
  ./docs/spec/consensus/signing.md
- [privval] [\#2948](https://github.com/tendermint/tendermint/issues/2948) Memoize pubkey so it's only requested once on startup
- [privval] [\#2923](https://github.com/tendermint/tendermint/issues/2923) Retry RemoteSigner connections on error

### BUG FIXES:

- [build] [\#3085](https://github.com/tendermint/tendermint/issues/3085) Fix `Version` field in build scripts (@husio)
- [crypto/multisig] [\#3102](https://github.com/tendermint/tendermint/issues/3102) Fix multisig keys address length
- [crypto/encoding] [\#3101](https://github.com/tendermint/tendermint/issues/3101) Fix `PubKeyMultisigThreshold` unmarshaling into `crypto.PubKey` interface
- [p2p/conn] [\#3111](https://github.com/tendermint/tendermint/issues/3111) Make SecretConnection thread safe
- [rpc] [\#3053](https://github.com/tendermint/tendermint/issues/3053) Fix internal error in `/tx_search` when results are empty
  (@gianfelipe93)
- [types] [\#2926](https://github.com/tendermint/tendermint/issues/2926) Do not panic if retrieving the privval's public key fails

## v0.27.4

*December 21st, 2018*

### BUG FIXES:

- [mempool] [\#3036](https://github.com/tendermint/tendermint/issues/3036) Fix
  LRU cache by popping the least recently used item when the cache is full,
  not the most recently used one!

## v0.27.3

*December 16th, 2018*

### BREAKING CHANGES:

* Go API
  - [dep] [\#3027](https://github.com/tendermint/tendermint/issues/3027) Revert to mainline Go crypto library, eliminating the modified
    `bcrypt.GenerateFromPassword`

## v0.27.2

*December 16th, 2018*

### IMPROVEMENTS:

- [node] [\#3025](https://github.com/tendermint/tendermint/issues/3025) Validate NodeInfo addresses on startup.

### BUG FIXES:

- [p2p] [\#3025](https://github.com/tendermint/tendermint/pull/3025) Revert to using defers in addrbook.  Fixes deadlocks in pex and consensus upon invalid ExternalAddr/ListenAddr configuration.

## v0.27.1

*December 15th, 2018*

Special thanks to external contributors on this release:
@danil-lashin, @hleb-albau, @james-ray, @leo-xinwang

### FEATURES:
- [rpc] [\#2964](https://github.com/tendermint/tendermint/issues/2964) Add `UnconfirmedTxs(limit)` and `NumUnconfirmedTxs()` methods to HTTP/Local clients (@danil-lashin)
- [docs] [\#3004](https://github.com/tendermint/tendermint/issues/3004) Enable full-text search on docs pages

### IMPROVEMENTS:
- [consensus] [\#2971](https://github.com/tendermint/tendermint/issues/2971) Return error if ValidatorSet is empty after InitChain
  (@leo-xinwang)
- [ci/cd] [\#3005](https://github.com/tendermint/tendermint/issues/3005) Updated CircleCI job to trigger website build when docs are updated
- [docs] Various updates

### BUG FIXES:
- [cmd] [\#2983](https://github.com/tendermint/tendermint/issues/2983) `testnet` command always sets `addr_book_strict = false`
- [config] [\#2980](https://github.com/tendermint/tendermint/issues/2980) Fix CORS options formatting
- [kv indexer] [\#2912](https://github.com/tendermint/tendermint/issues/2912) Don't ignore key when executing CONTAINS
- [mempool] [\#2961](https://github.com/tendermint/tendermint/issues/2961) Call `notifyTxsAvailable` if there're txs left after committing a block, but recheck=false
- [mempool] [\#2994](https://github.com/tendermint/tendermint/issues/2994) Reject txs with negative GasWanted
- [p2p] [\#2990](https://github.com/tendermint/tendermint/issues/2990) Fix a bug where seeds don't disconnect from a peer after 3h
- [consensus] [\#3006](https://github.com/tendermint/tendermint/issues/3006) Save state after InitChain only when stateHeight is also 0 (@james-ray)

## v0.27.0

*December 5th, 2018*

Special thanks to external contributors on this release:
@danil-lashin, @srmo

Special thanks to @dlguddus for discovering a [major
issue](https://github.com/tendermint/tendermint/issues/2718#issuecomment-440888677)
in the proposer selection algorithm.


This release is primarily about fixes to the proposer selection algorithm
in preparation for the [Cosmos Game of
Stakes](https://blog.cosmos.network/the-game-of-stakes-is-open-for-registration-83a404746ee6).
It also makes use of the `ConsensusParams.Validator.PubKeyTypes` to restrict the
key types that can be used by validators, and removes the `Heartbeat` consensus
message.

### BREAKING CHANGES:

* CLI/RPC/Config
  - [rpc] [\#2932](https://github.com/tendermint/tendermint/issues/2932) Rename `accum` to `proposer_priority`

* Go API
  - [db] [\#2913](https://github.com/tendermint/tendermint/pull/2913)
    ReverseIterator API change: start < end, and end is exclusive.
  - [types] [\#2932](https://github.com/tendermint/tendermint/issues/2932) Rename `Validator.Accum` to `Validator.ProposerPriority`

* Blockchain Protocol
  - [state] [\#2714](https://github.com/tendermint/tendermint/issues/2714) Validators can now only use pubkeys allowed within
    ConsensusParams.Validator.PubKeyTypes

* P2P Protocol
  - [consensus] [\#2871](https://github.com/tendermint/tendermint/issues/2871)
    Remove *ProposalHeartbeat* message as it serves no real purpose (@srmo)
  - [state] Fixes for proposer selection:
    - [\#2785](https://github.com/tendermint/tendermint/issues/2785) Accum for new validators is `-1.125*totalVotingPower` instead of 0
    - [\#2941](https://github.com/tendermint/tendermint/issues/2941) val.Accum is preserved during ValidatorSet.Update to avoid being
      reset to 0

### IMPROVEMENTS:

- [state] [\#2929](https://github.com/tendermint/tendermint/issues/2929) Minor refactor of updateState logic (@danil-lashin)
- [node] [\#2959](https://github.com/tendermint/tendermint/issues/2959) Allow node to start even if software's BlockProtocol is
  different from state's BlockProtocol
- [pex] [\#2959](https://github.com/tendermint/tendermint/issues/2959) Pex reactor logger uses `module=pex`

### BUG FIXES:

- [p2p] [\#2968](https://github.com/tendermint/tendermint/issues/2968) Panic on transport error rather than continuing to run but not
  accept new connections
- [p2p] [\#2969](https://github.com/tendermint/tendermint/issues/2969) Fix mismatch in peer count between `/net_info` and the prometheus
  metrics
- [rpc] [\#2408](https://github.com/tendermint/tendermint/issues/2408) `/broadcast_tx_commit`: Fix "interface conversion: interface {} in nil, not EventDataTx" panic (could happen if somebody sent a tx using `/broadcast_tx_commit` while Tendermint was being stopped)
- [state] [\#2785](https://github.com/tendermint/tendermint/issues/2785) Fix accum for new validators to be `-1.125*totalVotingPower`
  instead of 0, forcing them to wait before becoming the proposer. Also:
    - do not batch clip
    - keep accums averaged near 0
- [txindex/kv] [\#2925](https://github.com/tendermint/tendermint/issues/2925) Don't return false positives when range searching for a prefix of a tag value
- [types] [\#2938](https://github.com/tendermint/tendermint/issues/2938) Fix regression in v0.26.4 where we panic on empty
  genDoc.Validators
- [types] [\#2941](https://github.com/tendermint/tendermint/issues/2941) Preserve val.Accum during ValidatorSet.Update to avoid it being
  reset to 0 every time a validator is updated

## v0.26.4

*November 27th, 2018*

Special thanks to external contributors on this release:
@ackratos, @goolAdapter, @james-ray, @joe-bowman, @kostko,
@nagarajmanjunath, @tomtau


### FEATURES:

- [rpc] [\#2747](https://github.com/tendermint/tendermint/issues/2747) Enable subscription to tags emitted from `BeginBlock`/`EndBlock` (@kostko)
- [types] [\#2747](https://github.com/tendermint/tendermint/issues/2747) Add `ResultBeginBlock` and `ResultEndBlock` fields to `EventDataNewBlock`
    and `EventDataNewBlockHeader` to support subscriptions (@kostko)
- [types] [\#2918](https://github.com/tendermint/tendermint/issues/2918) Add Marshal, MarshalTo, Unmarshal methods to various structs
  to support Protobuf compatibility (@nagarajmanjunath)

### IMPROVEMENTS:

- [config] [\#2877](https://github.com/tendermint/tendermint/issues/2877) Add `blocktime_iota` to the config.toml (@ackratos)
    - NOTE: this should be a ConsensusParam, not part of the config, and will be
      removed from the config at a later date
      ([\#2920](https://github.com/tendermint/tendermint/issues/2920).
- [mempool] [\#2882](https://github.com/tendermint/tendermint/issues/2882) Add txs from Update to cache
- [mempool] [\#2891](https://github.com/tendermint/tendermint/issues/2891) Remove local int64 counter from being stored in every tx
- [node] [\#2866](https://github.com/tendermint/tendermint/issues/2866) Add ability to instantiate IPCVal (@joe-bowman)

### BUG FIXES:

- [blockchain] [\#2731](https://github.com/tendermint/tendermint/issues/2731) Retry both blocks if either is bad to avoid getting stuck during fast sync (@goolAdapter)
- [consensus] [\#2893](https://github.com/tendermint/tendermint/issues/2893) Use genDoc.Validators instead of state.NextValidators on replay when appHeight==0 (@james-ray)
- [log] [\#2868](https://github.com/tendermint/tendermint/issues/2868) Fix `module=main` setting overriding all others
    - NOTE: this changes the default logging behaviour to be much less verbose.
      Set `log_level="info"` to restore the previous behaviour.
- [rpc] [\#2808](https://github.com/tendermint/tendermint/issues/2808) Fix `accum` field in `/validators` by calling `IncrementAccum` if necessary
- [rpc] [\#2811](https://github.com/tendermint/tendermint/issues/2811) Allow integer IDs in JSON-RPC requests (@tomtau)
- [txindex/kv] [\#2759](https://github.com/tendermint/tendermint/issues/2759) Fix tx.height range queries
- [txindex/kv] [\#2775](https://github.com/tendermint/tendermint/issues/2775) Order tx results by index if height is the same
- [txindex/kv] [\#2908](https://github.com/tendermint/tendermint/issues/2908) Don't return false positives when searching for a prefix of a tag value

## v0.26.3

*November 17th, 2018*

Special thanks to external contributors on this release:
@danil-lashin, @kevlubkcm, @krhubert, @srmo


### BREAKING CHANGES:

* Go API
  - [rpc] [\#2791](https://github.com/tendermint/tendermint/issues/2791) Functions that start HTTP servers are now blocking:
    - Impacts `StartHTTPServer`, `StartHTTPAndTLSServer`, and `StartGRPCServer`
    - These functions now take a `net.Listener` instead of an address
  - [rpc] [\#2767](https://github.com/tendermint/tendermint/issues/2767) Subscribing to events
  `NewRound` and `CompleteProposal` return new types `EventDataNewRound` and
  `EventDataCompleteProposal`, respectively, instead of the generic `EventDataRoundState`. (@kevlubkcm)

### FEATURES:

- [log] [\#2843](https://github.com/tendermint/tendermint/issues/2843) New `log_format` config option, which can be set to 'plain' for colored
  text or 'json' for JSON output
- [types] [\#2767](https://github.com/tendermint/tendermint/issues/2767) New event types EventDataNewRound (with ProposerInfo) and EventDataCompleteProposal (with BlockID). (@kevlubkcm)

### IMPROVEMENTS:

- [dep] [\#2844](https://github.com/tendermint/tendermint/issues/2844) Dependencies are no longer pinned to an exact version in the
  Gopkg.toml:
  - Serialization libs are allowed to vary by patch release
  - Other libs are allowed to vary by minor release
- [p2p] [\#2857](https://github.com/tendermint/tendermint/issues/2857) "Send failed" is logged at debug level instead of error.
- [rpc] [\#2780](https://github.com/tendermint/tendermint/issues/2780) Add read and write timeouts to HTTP servers
- [state] [\#2848](https://github.com/tendermint/tendermint/issues/2848) Make "Update to validators" msg value pretty (@danil-lashin)

### BUG FIXES:
- [consensus] [\#2819](https://github.com/tendermint/tendermint/issues/2819) Don't send proposalHearbeat if not a validator
- [docs] [\#2859](https://github.com/tendermint/tendermint/issues/2859) Fix ConsensusParams details in spec
- [libs/autofile] [\#2760](https://github.com/tendermint/tendermint/issues/2760) Comment out autofile permissions check - should fix
  running Tendermint on Windows
- [p2p] [\#2869](https://github.com/tendermint/tendermint/issues/2869) Set connection config properly instead of always using default
- [p2p/pex] [\#2802](https://github.com/tendermint/tendermint/issues/2802) Seed mode fixes:
  - Only disconnect from inbound peers
  - Use FlushStop instead of Sleep to ensure all messages are sent before
    disconnecting

## v0.26.2

*November 15th, 2018*

Special thanks to external contributors on this release: @hleb-albau, @zhuzeyu

### FEATURES:

- [rpc] [\#2582](https://github.com/tendermint/tendermint/issues/2582) Enable CORS on RPC API (@hleb-albau)

### BUG FIXES:

- [abci] [\#2748](https://github.com/tendermint/tendermint/issues/2748) Unlock mutex in localClient so even when app panics (e.g. during CheckTx), consensus continue working
- [abci] [\#2748](https://github.com/tendermint/tendermint/issues/2748) Fix DATA RACE in localClient
- [amino] [\#2822](https://github.com/tendermint/tendermint/issues/2822) Update to v0.14.1 to support compiling on 32-bit platforms
- [rpc] [\#2748](https://github.com/tendermint/tendermint/issues/2748) Drain channel before calling Unsubscribe(All) in `/broadcast_tx_commit`

## v0.26.1

*November 11, 2018*

Special thanks to external contributors on this release: @katakonst

### IMPROVEMENTS:

- [consensus] [\#2704](https://github.com/tendermint/tendermint/issues/2704) Simplify valid POL round logic
- [docs] [\#2749](https://github.com/tendermint/tendermint/issues/2749) Deduplicate some ABCI docs
- [mempool] More detailed log messages
    - [\#2724](https://github.com/tendermint/tendermint/issues/2724)
    - [\#2762](https://github.com/tendermint/tendermint/issues/2762)

### BUG FIXES:

- [autofile] [\#2703](https://github.com/tendermint/tendermint/issues/2703) Do not panic when checking Head size
- [crypto/merkle] [\#2756](https://github.com/tendermint/tendermint/issues/2756) Fix crypto/merkle ProofOperators.Verify to check bounds on keypath parts.
- [mempool] fix a bug where we create a WAL despite `wal_dir` being empty
- [p2p] [\#2771](https://github.com/tendermint/tendermint/issues/2771) Fix `peer-id` label name to `peer_id` in prometheus metrics
- [p2p] [\#2797](https://github.com/tendermint/tendermint/pull/2797) Fix IDs in peer NodeInfo and require them for addresses
  in AddressBook
- [p2p] [\#2797](https://github.com/tendermint/tendermint/pull/2797) Do not close conn immediately after sending pex addrs in seed mode. Partial fix for [\#2092](https://github.com/tendermint/tendermint/issues/2092).

## v0.26.0

*November 2, 2018*

Special thanks to external contributors on this release:
@bradyjoestar, @connorwstein, @goolAdapter, @HaoyangLiu,
@james-ray, @overbool, @phymbert, @Slamper, @Uzair1995, @yutianwu.

Special thanks to @Slamper for a series of bug reports in our [bug bounty
program](https://hackerone.com/tendermint) which are fixed in this release.

This release is primarily about adding Version fields to various data structures,
optimizing consensus messages for signing and verification in
restricted environments (like HSMs and the Ethereum Virtual Machine), and
aligning the consensus code with the [specification](https://arxiv.org/abs/1807.04938).
It also includes our first take at a generalized merkle proof system, and
changes the length of hashes used for hashing data structures from 20 to 32
bytes.

See the [UPGRADING.md](UPGRADING.md#v0.26.0) for details on upgrading to the new
version.

Please note that we are still making breaking changes to the protocols.
While the new Version fields should help us to keep the software backwards compatible
even while upgrading the protocols, we cannot guarantee that new releases will
be compatible with old chains just yet. We expect there will be another breaking
release or two before the Cosmos Hub launch, but we will otherwise be paying
increasing attention to backwards compatibility. Thanks for bearing with us!

### BREAKING CHANGES:

* CLI/RPC/Config
  * [config] [\#2232](https://github.com/tendermint/tendermint/issues/2232) Timeouts are now strings like "3s" and "100ms", not ints
  * [config] [\#2505](https://github.com/tendermint/tendermint/issues/2505) Remove Mempool.RecheckEmpty (it was effectively useless anyways)
  * [config] [\#2490](https://github.com/tendermint/tendermint/issues/2490) `mempool.wal` is disabled by default
  * [privval] [\#2459](https://github.com/tendermint/tendermint/issues/2459) Split `SocketPVMsg`s implementations into Request and Response, where the Response may contain a error message (returned by the remote signer)
  * [state] [\#2644](https://github.com/tendermint/tendermint/issues/2644) Add Version field to State, breaking the format of State as
    encoded on disk.
  * [rpc] [\#2298](https://github.com/tendermint/tendermint/issues/2298) `/abci_query` takes `prove` argument instead of `trusted` and switches the default
    behaviour to `prove=false`
  * [rpc] [\#2654](https://github.com/tendermint/tendermint/issues/2654) Remove all `node_info.other.*_version` fields in `/status` and
    `/net_info`
  * [rpc] [\#2636](https://github.com/tendermint/tendermint/issues/2636) Remove
    `_params` suffix from fields in `consensus_params`.

* Apps
  * [abci] [\#2298](https://github.com/tendermint/tendermint/issues/2298) ResponseQuery.Proof is now a structured merkle.Proof, not just
    arbitrary bytes
  * [abci] [\#2644](https://github.com/tendermint/tendermint/issues/2644) Add Version to Header and shift all fields by one
  * [abci] [\#2662](https://github.com/tendermint/tendermint/issues/2662) Bump the field numbers for some `ResponseInfo` fields to make room for
      `AppVersion`
  * [abci] [\#2636](https://github.com/tendermint/tendermint/issues/2636) Updates to ConsensusParams
    * Remove `Params` suffix from field names
    * Add `Params` suffix to message types
    * Add new field and type, `Validator ValidatorParams`, to control what types of validator keys are allowed.

* Go API
  * [config] [\#2232](https://github.com/tendermint/tendermint/issues/2232) Timeouts are time.Duration, not ints
  * [crypto/merkle & lite] [\#2298](https://github.com/tendermint/tendermint/issues/2298) Various changes to accomodate General Merkle trees
  * [crypto/merkle] [\#2595](https://github.com/tendermint/tendermint/issues/2595) Remove all Hasher objects in favor of byte slices
  * [crypto/merkle] [\#2635](https://github.com/tendermint/tendermint/issues/2635) merkle.SimpleHashFromTwoHashes is no longer exported
  * [node] [\#2479](https://github.com/tendermint/tendermint/issues/2479) Remove node.RunForever
  * [rpc/client] [\#2298](https://github.com/tendermint/tendermint/issues/2298) `ABCIQueryOptions.Trusted` -> `ABCIQueryOptions.Prove`
  * [types] [\#2298](https://github.com/tendermint/tendermint/issues/2298) Remove `Index` and `Total` fields from `TxProof`.
  * [types] [\#2598](https://github.com/tendermint/tendermint/issues/2598)
    `VoteTypeXxx` are now of type `SignedMsgType byte` and named `XxxType`, eg.
    `PrevoteType`, `PrecommitType`.
  * [types] [\#2636](https://github.com/tendermint/tendermint/issues/2636) Rename fields in ConsensusParams to remove `Params` suffixes
  * [types] [\#2735](https://github.com/tendermint/tendermint/issues/2735) Simplify Proposal message to align with spec

* Blockchain Protocol
  * [crypto/tmhash] [\#2732](https://github.com/tendermint/tendermint/issues/2732) TMHASH is now full 32-byte SHA256
    * All hashes in the block header and Merkle trees are now 32-bytes
    * PubKey Addresses are still only 20-bytes
  * [state] [\#2587](https://github.com/tendermint/tendermint/issues/2587) Require block.Time of the fist block to be genesis time
  * [state] [\#2644](https://github.com/tendermint/tendermint/issues/2644) Require block.Version to match state.Version
  * [types] Update SignBytes for `Vote`/`Proposal`/`Heartbeat`:
    * [\#2459](https://github.com/tendermint/tendermint/issues/2459) Use amino encoding instead of JSON in `SignBytes`.
    * [\#2598](https://github.com/tendermint/tendermint/issues/2598) Reorder fields and use fixed sized encoding.
    * [\#2598](https://github.com/tendermint/tendermint/issues/2598) Change `Type` field from `string` to `byte` and use new
      `SignedMsgType` to enumerate.
  * [types] [\#2730](https://github.com/tendermint/tendermint/issues/2730) Use
    same order for fields in `Vote` as in the SignBytes
  * [types] [\#2732](https://github.com/tendermint/tendermint/issues/2732) Remove the address field from the validator hash
  * [types] [\#2644](https://github.com/tendermint/tendermint/issues/2644) Add Version struct to Header
  * [types] [\#2609](https://github.com/tendermint/tendermint/issues/2609) ConsensusParams.Hash() is the hash of the amino encoded
    struct instead of the Merkle tree of the fields
  * [types] [\#2670](https://github.com/tendermint/tendermint/issues/2670) Header.Hash() builds Merkle tree out of fields in the same
    order they appear in the header, instead of sorting by field name
  * [types] [\#2682](https://github.com/tendermint/tendermint/issues/2682) Use proto3 `varint` encoding for ints that are usually unsigned (instead of zigzag encoding).
  * [types] [\#2636](https://github.com/tendermint/tendermint/issues/2636) Add Validator field to ConsensusParams
      (Used to control which pubkey types validators can use, by abci type).

* P2P Protocol
  * [consensus] [\#2652](https://github.com/tendermint/tendermint/issues/2652)
    Replace `CommitStepMessage` with `NewValidBlockMessage`
  * [consensus] [\#2735](https://github.com/tendermint/tendermint/issues/2735) Simplify `Proposal` message to align with spec
  * [consensus] [\#2730](https://github.com/tendermint/tendermint/issues/2730)
    Add `Type` field to `Proposal` and use same order of fields as in the
    SignBytes for both `Proposal` and `Vote`
  * [p2p] [\#2654](https://github.com/tendermint/tendermint/issues/2654) Add `ProtocolVersion` struct with protocol versions to top of
    DefaultNodeInfo and require `ProtocolVersion.Block` to match during peer handshake


### FEATURES:
- [abci] [\#2557](https://github.com/tendermint/tendermint/issues/2557) Add `Codespace` field to `Response{CheckTx, DeliverTx, Query}`
- [abci] [\#2662](https://github.com/tendermint/tendermint/issues/2662) Add `BlockVersion` and `P2PVersion` to `RequestInfo`
- [crypto/merkle] [\#2298](https://github.com/tendermint/tendermint/issues/2298) General Merkle Proof scheme for chaining various types of Merkle trees together
- [docs/architecture] [\#1181](https://github.com/tendermint/tendermint/issues/1181) S
plit immutable and mutable parts of priv_validator.json

### IMPROVEMENTS:
- Additional Metrics
    - [consensus] [\#2169](https://github.com/cosmos/cosmos-sdk/issues/2169)
    - [p2p] [\#2169](https://github.com/cosmos/cosmos-sdk/issues/2169)
- [config] [\#2232](https://github.com/tendermint/tendermint/issues/2232) Added ValidateBasic method, which performs basic checks
- [crypto/ed25519] [\#2558](https://github.com/tendermint/tendermint/issues/2558) Switch to use latest `golang.org/x/crypto` through our fork at
  github.com/tendermint/crypto
- [libs/log] [\#2707](https://github.com/tendermint/tendermint/issues/2707) Add year to log format (@yutianwu)
- [tools] [\#2238](https://github.com/tendermint/tendermint/issues/2238) Binary dependencies are now locked to a specific git commit

### BUG FIXES:
- [\#2711](https://github.com/tendermint/tendermint/issues/2711) Validate all incoming reactor messages. Fixes various bugs due to negative ints.
- [autofile] [\#2428](https://github.com/tendermint/tendermint/issues/2428) Group.RotateFile need call Flush() before rename (@goolAdapter)
- [common] [\#2533](https://github.com/tendermint/tendermint/issues/2533) Fixed a bug in the `BitArray.Or` method
- [common] [\#2506](https://github.com/tendermint/tendermint/issues/2506) Fixed a bug in the `BitArray.Sub` method (@james-ray)
- [common] [\#2534](https://github.com/tendermint/tendermint/issues/2534) Fix `BitArray.PickRandom` to choose uniformly from true bits
- [consensus] [\#1690](https://github.com/tendermint/tendermint/issues/1690) Wait for
  timeoutPrecommit before starting next round
- [consensus] [\#1745](https://github.com/tendermint/tendermint/issues/1745) Wait for
  Proposal or timeoutProposal before entering prevote
- [consensus] [\#2642](https://github.com/tendermint/tendermint/issues/2642) Only propose ValidBlock, not LockedBlock
- [consensus] [\#2642](https://github.com/tendermint/tendermint/issues/2642) Initialized ValidRound and LockedRound to -1
- [consensus] [\#1637](https://github.com/tendermint/tendermint/issues/1637) Limit the amount of evidence that can be included in a
  block
- [consensus] [\#2652](https://github.com/tendermint/tendermint/issues/2652) Ensure valid block property with faulty proposer
- [evidence] [\#2515](https://github.com/tendermint/tendermint/issues/2515) Fix db iter leak (@goolAdapter)
- [libs/event] [\#2518](https://github.com/tendermint/tendermint/issues/2518) Fix event concurrency flaw (@goolAdapter)
- [node] [\#2434](https://github.com/tendermint/tendermint/issues/2434) Make node respond to signal interrupts while sleeping for genesis time
- [state] [\#2616](https://github.com/tendermint/tendermint/issues/2616) Pass nil to NewValidatorSet() when genesis file's Validators field is nil
- [p2p] [\#2555](https://github.com/tendermint/tendermint/issues/2555) Fix p2p switch FlushThrottle value (@goolAdapter)
- [p2p] [\#2668](https://github.com/tendermint/tendermint/issues/2668) Reconnect to originally dialed address (not self-reported address) for persistent peers

## v0.25.0

*September 22, 2018*

Special thanks to external contributors on this release:
@scriptionist, @bradyjoestar, @WALL-E

This release is mostly about the ConsensusParams - removing fields and enforcing MaxGas.
It also addresses some issues found via security audit, removes various unused
functions from `libs/common`, and implements
[ADR-012](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-012-peer-transport.md).

BREAKING CHANGES:

* CLI/RPC/Config
  * [rpc] [\#2391](https://github.com/tendermint/tendermint/issues/2391) /status `result.node_info.other` became a map
  * [types] [\#2364](https://github.com/tendermint/tendermint/issues/2364) Remove `TxSize` and `BlockGossip` from `ConsensusParams`
    * Maximum tx size is now set implicitly via the `BlockSize.MaxBytes`
    * The size of block parts in the consensus is now fixed to 64kB

* Apps
  * [mempool] [\#2360](https://github.com/tendermint/tendermint/issues/2360) Mempool tracks the `ResponseCheckTx.GasWanted` and
    `ConsensusParams.BlockSize.MaxGas` and enforces:
    - `GasWanted <= MaxGas` for every tx
    - `(sum of GasWanted in block) <= MaxGas` for block proposal

* Go API
  * [libs/common] [\#2431](https://github.com/tendermint/tendermint/issues/2431) Remove Word256 due to lack of use
  * [libs/common] [\#2452](https://github.com/tendermint/tendermint/issues/2452) Remove the following functions due to lack of use:
    * byteslice.go: cmn.IsZeros, cmn.RightPadBytes, cmn.LeftPadBytes, cmn.PrefixEndBytes
    * strings.go: cmn.IsHex, cmn.StripHex
    * int.go: Uint64Slice, all put/get int64 methods

FEATURES:
- [rpc] [\#2415](https://github.com/tendermint/tendermint/issues/2415) New `/consensus_params?height=X` endpoint to query the consensus
  params at any height (@scriptonist)
- [types] [\#1714](https://github.com/tendermint/tendermint/issues/1714) Add Address to GenesisValidator
- [metrics] [\#2337](https://github.com/tendermint/tendermint/issues/2337) `consensus.block_interval_metrics` is now gauge, not histogram (you will be able to see spikes, if any)
- [libs] [\#2286](https://github.com/tendermint/tendermint/issues/2286) Panic if `autofile` or `db/fsdb` permissions change from 0600.

IMPROVEMENTS:
- [libs/db] [\#2371](https://github.com/tendermint/tendermint/issues/2371) Output error instead of panic when the given `db_backend` is not initialized (@bradyjoestar)
- [mempool] [\#2399](https://github.com/tendermint/tendermint/issues/2399) Make mempool cache a proper LRU (@bradyjoestar)
- [p2p] [\#2126](https://github.com/tendermint/tendermint/issues/2126) Introduce PeerTransport interface to improve isolation of concerns
- [libs/common] [\#2326](https://github.com/tendermint/tendermint/issues/2326) Service returns ErrNotStarted

BUG FIXES:
- [node] [\#2294](https://github.com/tendermint/tendermint/issues/2294) Delay starting node until Genesis time
- [consensus] [\#2048](https://github.com/tendermint/tendermint/issues/2048) Correct peer statistics for marking peer as good
- [rpc] [\#2460](https://github.com/tendermint/tendermint/issues/2460) StartHTTPAndTLSServer() now passes StartTLS() errors back to the caller rather than hanging forever.
- [p2p] [\#2047](https://github.com/tendermint/tendermint/issues/2047) Accept new connections asynchronously
- [tm-bench] [\#2410](https://github.com/tendermint/tendermint/issues/2410) Enforce minimum transaction size (@WALL-E)

## 0.24.0

*September 6th, 2018*

Special thanks to external contributors with PRs included in this release: ackratos, james-ray, bradyjoestar,
peerlink, Ahmah2009, bluele, b00f.

This release includes breaking upgrades in the block header,
including the long awaited changes for delaying validator set updates by one
block to better support light clients.
It also fixes enforcement on the maximum size of blocks, and includes a BFT
timestamp in each block that can be safely used by applications.
There are also some minor breaking changes to the rpc, config, and ABCI.

See the [UPGRADING.md](UPGRADING.md#v0.24.0) for details on upgrading to the new
version.

From here on, breaking changes will be broken down to better reflect how users
are affected by a change.

A few more breaking changes are in the works - each will come with a clear
Architecture Decision Record (ADR) explaining the change. You can review ADRs
[here](https://github.com/tendermint/tendermint/tree/develop/docs/architecture)
or in the [open Pull Requests](https://github.com/tendermint/tendermint/pulls).
You can also check in on the [issues marked as
breaking](https://github.com/tendermint/tendermint/issues?q=is%3Aopen+is%3Aissue+label%3Abreaking).

BREAKING CHANGES:

* CLI/RPC/Config
  - [config] [\#2169](https://github.com/tendermint/tendermint/issues/2169) Replace MaxNumPeers with MaxNumInboundPeers and MaxNumOutboundPeers
  - [config] [\#2300](https://github.com/tendermint/tendermint/issues/2300) Reduce default mempool size from 100k to 5k, until ABCI rechecking is implemented.
  - [rpc] [\#1815](https://github.com/tendermint/tendermint/issues/1815) `/commit` returns a `signed_header` field instead of everything being top-level

* Apps
  - [abci] Added address of the original proposer of the block to Header
  - [abci] Change ABCI Header to match Tendermint exactly
  - [abci] [\#2159](https://github.com/tendermint/tendermint/issues/2159) Update use of `Validator` (see
    [ADR-018](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-018-ABCI-Validators.md)):
    - Remove PubKey from `Validator` (so it's just Address and Power)
    - Introduce `ValidatorUpdate` (with just PubKey and Power)
    - InitChain and EndBlock use ValidatorUpdate
    - Update field names and types in BeginBlock
  - [state] [\#1815](https://github.com/tendermint/tendermint/issues/1815) Validator set changes are now delayed by one block
    - updates returned in ResponseEndBlock for block H will be included in RequestBeginBlock for block H+2

* Go API
  - [lite] [\#1815](https://github.com/tendermint/tendermint/issues/1815) Complete refactor of the package
  - [node] [\#2212](https://github.com/tendermint/tendermint/issues/2212) NewNode now accepts a `*p2p.NodeKey` (@bradyjoestar)
  - [libs/common] [\#2199](https://github.com/tendermint/tendermint/issues/2199) Remove Fmt, in favor of fmt.Sprintf
  - [libs/common] SplitAndTrim was deleted
  - [libs/common] [\#2274](https://github.com/tendermint/tendermint/issues/2274) Remove unused Math functions like MaxInt, MaxInt64,
    MinInt, MinInt64 (@Ahmah2009)
  - [libs/clist] Panics if list extends beyond MaxLength
  - [crypto] [\#2205](https://github.com/tendermint/tendermint/issues/2205) Rename AminoRoute variables to no longer be prefixed by signature type.

* Blockchain Protocol
  - [state] [\#1815](https://github.com/tendermint/tendermint/issues/1815) Validator set changes are now delayed by one block (!)
    - Add NextValidatorSet to State, changes on-disk representation of state
  - [state] [\#2184](https://github.com/tendermint/tendermint/issues/2184) Enforce ConsensusParams.BlockSize.MaxBytes (See
    [ADR-020](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-020-block-size.md)).
    - Remove ConsensusParams.BlockSize.MaxTxs
    - Introduce maximum sizes for all components of a block, including ChainID
  - [types] Updates to the block Header:
    - [\#1815](https://github.com/tendermint/tendermint/issues/1815) NextValidatorsHash - hash of the validator set for the next block,
      so the current validators actually sign over the hash for the new
      validators
    - [\#2106](https://github.com/tendermint/tendermint/issues/2106) ProposerAddress - address of the block's original proposer
  - [consensus] [\#2203](https://github.com/tendermint/tendermint/issues/2203) Implement BFT time
    - Timestamp in block must be monotonic and equal the median of timestamps in block's LastCommit
  - [crypto] [\#2239](https://github.com/tendermint/tendermint/issues/2239) Secp256k1 signature changes (See
    [ADR-014](https://github.com/tendermint/tendermint/blob/develop/docs/architecture/adr-014-secp-malleability.md)):
    - format changed from DER to `r || s`, both little endian encoded as 32 bytes.
    - malleability removed by requiring `s` to be in canonical form.

* P2P Protocol
  - [p2p] [\#2263](https://github.com/tendermint/tendermint/issues/2263) Update secret connection to use a little endian encoded nonce
  - [blockchain] [\#2213](https://github.com/tendermint/tendermint/issues/2213) Fix Amino routes for blockchain reactor messages
    (@peerlink)


FEATURES:
- [types] [\#2015](https://github.com/tendermint/tendermint/issues/2015) Allow genesis file to have 0 validators (@b00f)
  - Initial validator set can be determined by the app in ResponseInitChain
- [rpc] [\#2161](https://github.com/tendermint/tendermint/issues/2161) New event `ValidatorSetUpdates` for when the validator set changes
- [crypto/multisig] [\#2164](https://github.com/tendermint/tendermint/issues/2164) Introduce multisig pubkey and signature format
- [libs/db] [\#2293](https://github.com/tendermint/tendermint/issues/2293) Allow passing options through when creating instances of leveldb dbs

IMPROVEMENTS:
- [docs] Lint documentation with `write-good` and `stop-words`.
- [docs] [\#2249](https://github.com/tendermint/tendermint/issues/2249) Refactor, deduplicate, and improve the ABCI docs and spec (with thanks to @ttmc).
- [scripts] [\#2196](https://github.com/tendermint/tendermint/issues/2196) Added json2wal tool, which is supposed to help our users restore (@bradyjoestar)
  corrupted WAL files and compose test WAL files (@bradyjoestar)
- [mempool] [\#2234](https://github.com/tendermint/tendermint/issues/2234) Now stores txs by hash inside of the cache, to mitigate memory leakage
- [mempool] [\#2166](https://github.com/tendermint/tendermint/issues/2166) Set explicit capacity for map when updating txs (@bluele)

BUG FIXES:
- [config] [\#2284](https://github.com/tendermint/tendermint/issues/2284) Replace `db_path` with `db_dir` from automatically generated configuration files.
- [mempool] [\#2188](https://github.com/tendermint/tendermint/issues/2188) Fix OOM issue from cache map and list getting out of sync
- [state] [\#2051](https://github.com/tendermint/tendermint/issues/2051) KV store index supports searching by `tx.height` (@ackratos)
- [rpc] [\#2327](https://github.com/tendermint/tendermint/issues/2327) `/dial_peers` does not try to dial existing peers
- [node] [\#2323](https://github.com/tendermint/tendermint/issues/2323) Filter empty strings from config lists (@james-ray)
- [abci/client] [\#2236](https://github.com/tendermint/tendermint/issues/2236) Fix closing GRPC connection (@bradyjoestar)

## 0.23.1

*August 22nd, 2018*

BUG FIXES:
- [libs/autofile] [\#2261](https://github.com/tendermint/tendermint/issues/2261) Fix log rotation so it actually happens.
    - Fixes issues with consensus WAL growing unbounded ala [\#2259](https://github.com/tendermint/tendermint/issues/2259)

## 0.23.0

*August 5th, 2018*

This release includes breaking upgrades in our P2P encryption,
some ABCI messages, and how we encode time and signatures.

A few more changes are still coming to the Header, ABCI,
and validator set handling to better support light clients, BFT time, and
upgrades. Most notably, validator set changes will be delayed by one block (see
[#1815][i1815]).

We also removed `make ensure_deps` in favour of `make get_vendor_deps`.

BREAKING CHANGES:
- [abci] Changed time format from int64 to google.protobuf.Timestamp
- [abci] Changed Validators to LastCommitInfo in RequestBeginBlock
- [abci] Removed Fee from ResponseDeliverTx and ResponseCheckTx
- [crypto] Switch crypto.Signature from interface to []byte for space efficiency
  [#2128](https://github.com/tendermint/tendermint/pull/2128)
    - NOTE: this means signatures no longer have the prefix bytes in Amino
      binary nor the `type` field in Amino JSON. They're just bytes.
- [p2p] Remove salsa and ripemd primitives, in favor of using chacha as a stream cipher, and hkdf [#2054](https://github.com/tendermint/tendermint/pull/2054)
- [tools] Removed `make ensure_deps` in favor of `make get_vendor_deps`
- [types] CanonicalTime uses nanoseconds instead of clipping to ms
    - breaks serialization/signing of all messages with a timestamp

FEATURES:
- [tools] Added `make check_dep`
    - ensures gopkg.lock is synced with gopkg.toml
    - ensures no branches are used in the gopkg.toml

IMPROVEMENTS:
- [blockchain] Improve fast-sync logic
  [#1805](https://github.com/tendermint/tendermint/pull/1805)
    - tweak params
    - only process one block at a time to avoid starving
- [common] bit array functions which take in another parameter are now thread safe
- [crypto] Switch hkdfchachapoly1305 to xchachapoly1305
- [p2p] begin connecting to peers as soon a seed node provides them to you ([#2093](https://github.com/tendermint/tendermint/issues/2093))

BUG FIXES:
- [common] Safely handle cases where atomic write files already exist [#2109](https://github.com/tendermint/tendermint/issues/2109)
- [privval] fix a deadline for accepting new connections in socket private
  validator.
- [p2p] Allow startup if a configured seed node's IP can't be resolved ([#1716](https://github.com/tendermint/tendermint/issues/1716))
- [node] Fully exit when CTRL-C is pressed even if consensus state panics [#2072](https://github.com/tendermint/tendermint/issues/2072)

[i1815]: https://github.com/tendermint/tendermint/pull/1815

## 0.22.8

*July 26th, 2018*

BUG FIXES

- [consensus, blockchain] Fix 0.22.7 below.

## 0.22.7

*July 26th, 2018*

BUG FIXES

- [consensus, blockchain] Register the Evidence interface so it can be
  marshalled/unmarshalled by the blockchain and consensus reactors

## 0.22.6

*July 24th, 2018*

BUG FIXES

- [rpc] Fix `/blockchain` endpoint
    - (#2049) Fix OOM attack by returning error on negative input
    - Fix result length to have max 20 (instead of 21) block metas
- [rpc] Validate height is non-negative in `/abci_query`
- [consensus] (#2050) Include evidence in proposal block parts (previously evidence was
  not being included in blocks!)
- [p2p] (#2046) Close rejected inbound connections so file descriptor doesn't
  leak
- [Gopkg] (#2053) Fix versions in the toml

## 0.22.5

*July 23th, 2018*

BREAKING CHANGES:
- [crypto] Refactor `tendermint/crypto` into many subpackages
- [libs/common] remove exponentially distributed random numbers

IMPROVEMENTS:
- [abci, libs/common] Generated gogoproto static marshaller methods
- [config] Increase default send/recv rates to 5 mB/s
- [p2p] reject addresses coming from private peers
- [p2p] allow persistent peers to be private

BUG FIXES:
- [mempool] fixed a race condition when `create_empty_blocks=false` where a
  transaction is published at an old height.
- [p2p] dial external IP setup by `persistent_peers`, not internal NAT IP
- [rpc] make `/status` RPC endpoint resistant to consensus halt

## 0.22.4

*July 14th, 2018*

BREAKING CHANGES:
- [genesis] removed deprecated `app_options` field.
- [types] Genesis.AppStateJSON -> Genesis.AppState

FEATURES:
- [tools] Merged in from github.com/tendermint/tools

BUG FIXES:
- [tools/tm-bench] Various fixes
- [consensus] Wait for WAL to stop on shutdown
- [abci] Fix #1891, pending requests cannot hang when abci server dies.
  Previously a crash in BeginBlock could leave tendermint in broken state.

## 0.22.3

*July 10th, 2018*

IMPROVEMENTS
- Update dependencies
    * pin all values in Gopkg.toml to version or commit
    * update golang/protobuf to v1.1.0

## 0.22.2

*July 10th, 2018*

IMPROVEMENTS
- More cleanup post repo merge!
- [docs] Include `ecosystem.json` and `tendermint-bft.md` from deprecated `aib-data` repository.
- [config] Add `instrumentation.max_open_connections`, which limits the number
  of requests in flight to Prometheus server (if enabled). Default: 3.


BUG FIXES
- [rpc] Allow unquoted integers in requests
    - NOTE: this is only for URI requests. JSONRPC requests and all responses
      will use quoted integers (the proto3 JSON standard).
- [consensus] Fix halt on shutdown

## 0.22.1

*July 5th, 2018*

IMPROVEMENTS

* Cleanup post repo-merge.
* [docs] Various improvements.

BUG FIXES

* [state] Return error when EndBlock returns a 0-power validator that isn't
  already in the validator set.
* [consensus] Shut down WAL properly.


## 0.22.0

*July 2nd, 2018*

BREAKING CHANGES:
- [config]
    * Remove `max_block_size_txs` and `max_block_size_bytes` in favor of
        consensus params from the genesis file.
    * Rename `skip_upnp` to `upnp`, and turn it off by default.
    * Change `max_packet_msg_size` back to `max_packet_msg_payload_size`
- [rpc]
    * All integers are encoded as strings (part of the update for Amino v0.10.1)
    * `syncing` is now called `catching_up`
- [types] Update Amino to v0.10.1
    * Amino is now fully proto3 compatible for the basic types
    * JSON-encoded types now use the type name instead of the prefix bytes
    * Integers are encoded as strings
- [crypto] Update go-crypto to v0.10.0 and merge into `crypto`
    * privKey.Sign returns error.
    * ed25519 address changed to the first 20-bytes of the SHA256 of the raw pubkey bytes
    * `tmlibs/merkle` -> `crypto/merkle`. Uses SHA256 instead of RIPEMD160
- [tmlibs] Update to v0.9.0 and merge into `libs`
    * remove `merkle` package (moved to `crypto/merkle`)

FEATURES
- [cmd] Added metrics (served under `/metrics` using a Prometheus client;
  disabled by default). See the new `instrumentation` section in the config and
  [metrics](https://tendermint.readthedocs.io/projects/tools/en/develop/metrics.html)
  guide.
- [p2p] Add IPv6 support to peering.
- [p2p] Add `external_address` to config to allow specifying the address for
  peers to dial

IMPROVEMENT
- [rpc/client] Supports https and wss now.
- [crypto] Make public key size into public constants
- [mempool] Log tx hash, not entire tx
- [abci] Merged in github.com/tendermint/abci
- [crypto] Merged in github.com/tendermint/go-crypto
- [libs] Merged in github.com/tendermint/tmlibs
- [docs] Move from .rst to .md

BUG FIXES:
- [rpc] Limit maximum number of HTTP/WebSocket connections
  (`rpc.max_open_connections`) and gRPC connections
  (`rpc.grpc_max_open_connections`). Check out "Running In Production" guide if
  you want to increase them.
- [rpc] Limit maximum request body size to 1MB (header is limited to 1MB).
- [consensus] Fix a halting bug where `create_empty_blocks=false`
- [p2p] Fix panic in seed mode

## 0.21.0

*June 21th, 2018*

BREAKING CHANGES

- [config] Change default ports from 4665X to 2665X. Ports over 32768 are
  ephemeral and reserved for use by the kernel.
- [cmd] `unsafe_reset_all` removes the addrbook.json

IMPROVEMENT

- [pubsub] Set default capacity to 0
- [docs] Various improvements

BUG FIXES

- [consensus] Fix an issue where we don't make blocks after `fast_sync` when `create_empty_blocks=false`
- [mempool] Fix #1761 where we don't process txs if `cache_size=0`
- [rpc] Fix memory leak in Websocket (when using `/subscribe` method)
- [config] Escape paths in config - fixes config paths on Windows

## 0.20.0

*June 6th, 2018*

This is the first in a series of breaking releases coming to Tendermint after
soliciting developer feedback and conducting security audits.

This release does not break any blockchain data structures or
protocols other than the ABCI messages between Tendermint and the application.

Applications that upgrade for ABCI v0.11.0 should be able to continue running Tendermint
v0.20.0 on blockchains created with v0.19.X

BREAKING CHANGES

- [abci] Upgrade to
  [v0.11.0](https://github.com/tendermint/abci/blob/master/CHANGELOG.md#0110)
- [abci] Change Query path for filtering peers by node ID from
  `p2p/filter/pubkey/<id>` to `p2p/filter/id/<id>`

## 0.19.9

*June 5th, 2018*

BREAKING CHANGES

- [types/priv_validator] Moved to top level `privval` package

FEATURES

- [config] Collapse PeerConfig into P2PConfig
- [docs] Add quick-install script
- [docs/spec] Add table of Amino prefixes

BUG FIXES

- [rpc] Return 404 for unknown endpoints
- [consensus] Flush WAL on stop
- [evidence] Don't send evidence to peers that are behind
- [p2p] Fix memory leak on peer disconnects
- [rpc] Fix panic when `per_page=0`

## 0.19.8

*June 4th, 2018*

BREAKING:

- [p2p] Remove `auth_enc` config option, peer connections are always auth
  encrypted. Technically a breaking change but seems no one was using it and
  arguably a bug fix :)

BUG FIXES

- [mempool] Fix deadlock under high load when `skip_timeout_commit=true` and
  `create_empty_blocks=false`

## 0.19.7

*May 31st, 2018*

BREAKING:

- [libs/pubsub] TagMap#Get returns a string value
- [libs/pubsub] NewTagMap accepts a map of strings

FEATURES

- [rpc] the RPC documentation is now published to https://tendermint.github.io/slate
- [p2p] AllowDuplicateIP config option to refuse connections from same IP.
    - true by default for now, false by default in next breaking release
- [docs] Add docs for query, tx indexing, events, pubsub
- [docs] Add some notes about running Tendermint in production

IMPROVEMENTS:

- [consensus] Consensus reactor now receives events from a separate synchronous event bus,
  which is not dependant on external RPC load
- [consensus/wal] do not look for height in older files if we've seen height - 1
- [docs] Various cleanup and link fixes

## 0.19.6

*May 29th, 2018*

BUG FIXES

- [blockchain] Fix fast-sync deadlock during high peer turnover

BUG FIX:

- [evidence] Dont send peers evidence from heights they haven't synced to yet
- [p2p] Refuse connections to more than one peer with the same IP
- [docs] Various fixes

## 0.19.5

*May 20th, 2018*

BREAKING CHANGES

- [rpc/client] TxSearch and UnconfirmedTxs have new arguments (see below)
- [rpc/client] TxSearch returns ResultTxSearch
- [version] Breaking changes to Go APIs will not be reflected in breaking
  version change, but will be included in changelog.

FEATURES

- [rpc] `/tx_search` takes `page` (starts at 1) and `per_page` (max 100, default 30) args to paginate results
- [rpc] `/unconfirmed_txs` takes `limit` (max 100, default 30) arg to limit the output
- [config] `mempool.size` and `mempool.cache_size` options

IMPROVEMENTS

- [docs] Lots of updates
- [consensus] Only Fsync() the WAL before executing msgs from ourselves

BUG FIXES

- [mempool] Enforce upper bound on number of transactions

## 0.19.4 (May 17th, 2018)

IMPROVEMENTS

- [state] Improve tx indexing by using batches
- [consensus, state] Improve logging (more consensus logs, fewer tx logs)
- [spec] Moved to `docs/spec` (TODO cleanup the rest of the docs ...)

BUG FIXES

- [consensus] Fix issue #1575 where a late proposer can get stuck

## 0.19.3 (May 14th, 2018)

FEATURES

- [rpc] New `/consensus_state` returns just the votes seen at the current height

IMPROVEMENTS

- [rpc] Add stringified votes and fraction of power voted to `/dump_consensus_state`
- [rpc] Add PeerStateStats to `/dump_consensus_state`

BUG FIXES

- [cmd] Set GenesisTime during `tendermint init`
- [consensus] fix ValidBlock rules

## 0.19.2 (April 30th, 2018)

FEATURES:

- [p2p] Allow peers with different Minor versions to connect
- [rpc] `/net_info` includes `n_peers`

IMPROVEMENTS:

- [p2p] Various code comments, cleanup, error types
- [p2p] Change some Error logs to Debug

BUG FIXES:

- [p2p] Fix reconnect to persistent peer when first dial fails
- [p2p] Validate NodeInfo.ListenAddr
- [p2p] Only allow (MaxNumPeers - MaxNumOutboundPeers) inbound peers
- [p2p/pex] Limit max msg size to 64kB
- [p2p] Fix panic when pex=false
- [p2p] Allow multiple IPs per ID in AddrBook
- [p2p] Fix before/after bugs in addrbook isBad()

## 0.19.1 (April 27th, 2018)

Note this release includes some small breaking changes in the RPC and one in the
config that are really bug fixes. v0.19.1 will work with existing chains, and make Tendermint
easier to use and debug. With <3

BREAKING (MINOR)

- [config] Removed `wal_light` setting. If you really needed this, let us know

FEATURES:

- [networks] moved in tooling from devops repo: terraform and ansible scripts for deploying testnets !
- [cmd] Added `gen_node_key` command

BUG FIXES

Some of these are breaking in the RPC response, but they're really bugs!

- [spec] Document address format and pubkey encoding pre and post Amino
- [rpc] Lower case JSON field names
- [rpc] Fix missing entries, improve, and lower case the fields in `/dump_consensus_state`
- [rpc] Fix NodeInfo.Channels format to hex
- [rpc] Add Validator address to `/status`
- [rpc] Fix `prove` in ABCIQuery
- [cmd] MarshalJSONIndent on init

## 0.19.0 (April 13th, 2018)

BREAKING:
- [cmd] improved `testnet` command; now it can fill in `persistent_peers` for you in the config file and much more (see `tendermint testnet --help` for details)
- [cmd] `show_node_id` now returns an error if there is no node key
- [rpc]: changed the output format for the `/status` endpoint (see https://godoc.org/github.com/tendermint/tendermint/rpc/core#Status)

Upgrade from go-wire to go-amino. This is a sweeping change that breaks everything that is
serialized to disk or over the network.

See github.com/tendermint/go-amino for details on the new format.

See `scripts/wire2amino.go` for a tool to upgrade
genesis/priv_validator/node_key JSON files.

FEATURES

- [test] docker-compose for local testnet setup (thanks Greg!)

## 0.18.0 (April 6th, 2018)

BREAKING:

- [types] Merkle tree uses different encoding for varints (see tmlibs v0.8.0)
- [types] ValidtorSet.GetByAddress returns -1 if no validator found
- [p2p] require all addresses come with an ID no matter what
- [rpc] Listening address must contain tcp:// or unix:// prefix

FEATURES:

- [rpc] StartHTTPAndTLSServer (not used yet)
- [rpc] Include validator's voting power in `/status`
- [rpc] `/tx` and `/tx_search` responses now include the transaction hash
- [rpc] Include peer NodeIDs in `/net_info`

IMPROVEMENTS:
- [config] trim whitespace from elements of lists (like `persistent_peers`)
- [rpc] `/tx_search` results are sorted by height
- [p2p] do not try to connect to ourselves (ok, maybe only once)
- [p2p] seeds respond with a bias towards good peers

BUG FIXES:
- [rpc] fix subscribing using an abci.ResponseDeliverTx tag
- [rpc] fix tx_indexers matchRange
- [rpc] fix unsubscribing (see tmlibs v0.8.0)

## 0.17.1 (March 27th, 2018)

BUG FIXES:
- [types] Actually support `app_state` in genesis as `AppStateJSON`

## 0.17.0 (March 27th, 2018)

BREAKING:
- [types] WriteSignBytes -> SignBytes

IMPROVEMENTS:
- [all] renamed `dummy` (`persistent_dummy`) to `kvstore` (`persistent_kvstore`) (name "dummy" is deprecated and will not work in the next breaking release)
- [docs] note on determinism (docs/determinism.rst)
- [genesis] `app_options` field is deprecated. please rename it to `app_state` in your genesis file(s). `app_options` will not work in the next breaking release
- [p2p] dial seeds directly without potential peers
- [p2p] exponential backoff for addrs in the address book
- [p2p] mark peer as good if it contributed enough votes or block parts
- [p2p] stop peer if it sends incorrect data, msg to unknown channel, msg we did not expect
- [p2p] when `auth_enc` is true, all dialed peers must have a node ID in their address
- [spec] various improvements
- switched from glide to dep internally for package management
- [wire] prep work for upgrading to new go-wire (which is now called go-amino)

FEATURES:
- [config] exposed `auth_enc` flag to enable/disable encryption
- [config] added the `--p2p.private_peer_ids` flag and `PrivatePeerIDs` config variable (see config for description)
- [rpc] added `/health` endpoint, which returns empty result for now
- [types/priv_validator] new format and socket client, allowing for remote signing

BUG FIXES:
- [consensus] fix liveness bug by introducing ValidBlock mechanism

## 0.16.0 (February 20th, 2018)

BREAKING CHANGES:
- [config] use $TMHOME/config for all config and json files
- [p2p] old `--p2p.seeds` is now `--p2p.persistent_peers` (persistent peers to which TM will always connect to)
- [p2p] now `--p2p.seeds` only used for getting addresses (if addrbook is empty; not persistent)
- [p2p] NodeInfo: remove RemoteAddr and add Channels
    - we must have at least one overlapping channel with peer
    - we only send msgs for channels the peer advertised
- [p2p/conn] pong timeout
- [lite] comment out IAVL related code

FEATURES:
- [p2p] added new `/dial_peers&persistent=_` **unsafe** endpoint
- [p2p] persistent node key in `$THMHOME/config/node_key.json`
- [p2p] introduce peer ID and authenticate peers by ID using addresses like `ID@IP:PORT`
- [p2p/pex] new seed mode crawls the network and serves as a seed.
- [config] MempoolConfig.CacheSize
- [config] P2P.SeedMode (`--p2p.seed_mode`)

IMPROVEMENT:
- [p2p/pex] stricter rules in the PEX reactor for better handling of abuse
- [p2p] various improvements to code structure including subpackages for `pex` and `conn`
- [docs] new spec!
- [all] speed up the tests!

BUG FIX:
- [blockchain] StopPeerForError on timeout
- [consensus] StopPeerForError on a bad Maj23 message
- [state] flush mempool conn before calling commit
- [types] fix priv val signing things that only differ by timestamp
- [mempool] fix memory leak causing zombie peers
- [p2p/conn] fix potential deadlock

## 0.15.0 (December 29, 2017)

BREAKING CHANGES:
- [p2p] enable the Peer Exchange reactor by default
- [types] add Timestamp field to Proposal/Vote
- [types] add new fields to Header: TotalTxs, ConsensusParamsHash, LastResultsHash, EvidenceHash
- [types] add Evidence to Block
- [types] simplify ValidateBasic
- [state] updates to support changes to the header
- [state] Enforce <1/3 of validator set can change at a time

FEATURES:
- [state] Send indices of absent validators and addresses of byzantine validators in BeginBlock
- [state] Historical ConsensusParams and ABCIResponses
- [docs] Specification for the base Tendermint data structures.
- [evidence] New evidence reactor for gossiping and managing evidence
- [rpc] `/block_results?height=X` returns the DeliverTx results for a given height.

IMPROVEMENTS:
- [consensus] Better handling of corrupt WAL file

BUG FIXES:
- [lite] fix race
- [state] validate block.Header.ValidatorsHash
- [p2p] allow seed addresses to be prefixed with eg. `tcp://`
- [p2p] use consistent key to refer to peers so we dont try to connect to existing peers
- [cmd] fix `tendermint init` to ignore files that are there and generate files that aren't.

## 0.14.0 (December 11, 2017)

BREAKING CHANGES:
- consensus/wal: removed separator
- rpc/client: changed Subscribe/Unsubscribe/UnsubscribeAll funcs signatures to be identical to event bus.

FEATURES:
- new `tendermint lite` command (and `lite/proxy` pkg) for running a light-client RPC proxy.
    NOTE it is currently insecure and its APIs are not yet covered by semver

IMPROVEMENTS:
- rpc/client: can act as event bus subscriber (See https://github.com/tendermint/tendermint/issues/945).
- p2p: use exponential backoff from seconds to hours when attempting to reconnect to persistent peer
- config: moniker defaults to the machine's hostname instead of "anonymous"

BUG FIXES:
- p2p: no longer exit if one of the seed addresses is incorrect

## 0.13.0 (December 6, 2017)

BREAKING CHANGES:
- abci: update to v0.8 using gogo/protobuf; includes tx tags, vote info in RequestBeginBlock, data.Bytes everywhere, use int64, etc.
- types: block heights are now `int64` everywhere
- types & node: EventSwitch and EventCache have been replaced by EventBus and EventBuffer; event types have been overhauled
- node: EventSwitch methods now refer to EventBus
- rpc/lib/types: RPCResponse is no longer a pointer; WSRPCConnection interface has been modified
- rpc/client: WaitForOneEvent takes an EventsClient instead of types.EventSwitch
- rpc/client: Add/RemoveListenerForEvent are now Subscribe/Unsubscribe
- rpc/core/types: ResultABCIQuery wraps an abci.ResponseQuery
- rpc: `/subscribe` and `/unsubscribe` take `query` arg instead of `event`
- rpc: `/status` returns the LatestBlockTime in human readable form instead of in nanoseconds
- mempool: cached transactions return an error instead of an ABCI response with BadNonce

FEATURES:
- rpc: new `/unsubscribe_all` WebSocket RPC endpoint
- rpc: new `/tx_search` endpoint for filtering transactions by more complex queries
- p2p/trust: new trust metric for tracking peers. See ADR-006
- config: TxIndexConfig allows to set what DeliverTx tags to index

IMPROVEMENTS:
- New asynchronous events system using `tmlibs/pubsub`
- logging: Various small improvements
- consensus: Graceful shutdown when app crashes
- tests: Fix various non-deterministic errors
- p2p: more defensive programming

BUG FIXES:
- consensus: fix panic where prs.ProposalBlockParts is not initialized
- p2p: fix panic on bad channel

## 0.12.1 (November 27, 2017)

BUG FIXES:
- upgrade tmlibs dependency to enable Windows builds for Tendermint

## 0.12.0 (October 27, 2017)

BREAKING CHANGES:
 - rpc/client: websocket ResultsCh and ErrorsCh unified in ResponsesCh.
 - rpc/client: ABCIQuery no longer takes `prove`
 - state: remove GenesisDoc from state.
 - consensus: new binary WAL format provides efficiency and uses checksums to detect corruption
    - use scripts/wal2json to convert to json for debugging

FEATURES:
 - new `Verifiers` pkg contains the tendermint light-client library (name subject to change)!
 - rpc: `/genesis` includes the `app_options` .
 - rpc: `/abci_query` takes an additional `height` parameter to support historical queries.
 - rpc/client: new ABCIQueryWithOptions supports options like `trusted` (set false to get a proof) and `height` to query a historical height.

IMPROVEMENTS:
 - rpc: `/genesis` result includes `app_options`
 - rpc/lib/client: add jitter to reconnects.
 - rpc/lib/types: `RPCError` satisfies the `error` interface.

BUG FIXES:
 - rpc/client: fix ws deadlock after stopping
 - blockchain: fix panic on AddBlock when peer is nil
 - mempool: fix sending on TxsAvailable when a tx has been invalidated
 - consensus: dont run WAL catchup if we fast synced

## 0.11.1 (October 10, 2017)

IMPROVEMENTS:
 - blockchain/reactor: respondWithNoResponseMessage for missing height

BUG FIXES:
 - rpc: fixed client WebSocket timeout
 - rpc: client now resubscribes on reconnection
 - rpc: fix panics on missing params
 - rpc: fix `/dump_consensus_state` to have normal json output (NOTE: technically breaking, but worth a bug fix label)
 - types: fixed out of range error in VoteSet.addVote
 - consensus: fix wal autofile via https://github.com/tendermint/tmlibs/blob/master/CHANGELOG.md#032-october-2-2017

## 0.11.0 (September 22, 2017)

BREAKING:
 - genesis file: validator `amount` is now `power`
 - abci: Info, BeginBlock, InitChain all take structs
 - rpc: various changes to match JSONRPC spec (http://www.jsonrpc.org/specification), including breaking ones:
    - requests that previously returned HTTP code 4XX now return 200 with an error code in the JSONRPC.
    - `rpctypes.RPCResponse` uses new `RPCError` type instead of `string`.

 - cmd: if there is no genesis, exit immediately instead of waiting around for one to show.
 - types: `Signer.Sign` returns an error.
 - state: every validator set change is persisted to disk, which required some changes to the `State` structure.
 - p2p: new `p2p.Peer` interface used for all reactor methods (instead of `*p2p.Peer` struct).

FEATURES:
 - rpc: `/validators?height=X` allows querying of validators at previous heights.
 - rpc: Leaving the `height` param empty for `/block`, `/validators`, and `/commit` will return the value for the latest height.

IMPROVEMENTS:
 - docs: Moved all docs from the website and tools repo in, converted to `.rst`, and cleaned up for presentation on `tendermint.readthedocs.io`

BUG FIXES:
 - fix WAL openning issue on Windows

## 0.10.4 (September 5, 2017)

IMPROVEMENTS:
- docs: Added Slate docs to each rpc function (see rpc/core)
- docs: Ported all website docs to Read The Docs
- config: expose some p2p params to tweak performance: RecvRate, SendRate, and MaxMsgPacketPayloadSize
- rpc: Upgrade the websocket client and server, including improved auto reconnect, and proper ping/pong

BUG FIXES:
- consensus: fix panic on getVoteBitArray
- consensus: hang instead of panicking on byzantine consensus failures
- cmd: dont load config for version command

## 0.10.3 (August 10, 2017)

FEATURES:
- control over empty block production:
  - new flag, `--consensus.create_empty_blocks`; when set to false, blocks are only created when there are txs or when the AppHash changes.
  - new config option, `consensus.create_empty_blocks_interval`; an empty block is created after this many seconds.
  - in normal operation, `create_empty_blocks = true` and `create_empty_blocks_interval = 0`, so blocks are being created all the time (as in all previous versions of tendermint). The number of empty blocks can be reduced by increasing `create_empty_blocks_interval` or by setting `create_empty_blocks = false`.
  - new `TxsAvailable()` method added to Mempool that returns a channel which fires when txs are available.
  - new heartbeat message added to consensus reactor to notify peers that a node is waiting for txs before entering propose step.
- rpc: Add `syncing` field to response returned by `/status`. Is `true` while in fast-sync mode.

IMPROVEMENTS:
- various improvements to documentation and code comments

BUG FIXES:
- mempool: pass height into constructor so it doesn't always start at 0

## 0.10.2 (July 10, 2017)

FEATURES:
- Enable lower latency block commits by adding consensus reactor sleep durations and p2p flush throttle timeout to the config

IMPROVEMENTS:
- More detailed logging in the consensus reactor and state machine
- More in-code documentation for many exposed functions, especially in consensus/reactor.go and p2p/switch.go
- Improved readability for some function definitions and code blocks with long lines

## 0.10.1 (June 28, 2017)

FEATURES:
- Use `--trace` to get stack traces for logged errors
- types: GenesisDoc.ValidatorHash returns the hash of the genesis validator set
- types: GenesisDocFromFile parses a GenesiDoc from a JSON file

IMPROVEMENTS:
- Add a Code of Conduct
- Variety of improvements as suggested by `megacheck` tool
- rpc: deduplicate tests between rpc/client and rpc/tests
- rpc: addresses without a protocol prefix default to `tcp://`. `http://` is also accepted as an alias for `tcp://`
- cmd: commands are more easily reuseable from other tools
- DOCKER: automate build/push

BUG FIXES:
- Fix log statements using keys with spaces (logger does not currently support spaces)
- rpc: set logger on websocket connection
- rpc: fix ws connection stability by setting write deadline on pings

## 0.10.0 (June 2, 2017)

Includes major updates to configuration, logging, and json serialization.
Also includes the Grand Repo-Merge of 2017.

BREAKING CHANGES:

- Config and Flags:
  - The `config` map is replaced with a [`Config` struct](https://github.com/tendermint/tendermint/blob/master/config/config.go#L11),
containing substructs: `BaseConfig`, `P2PConfig`, `MempoolConfig`, `ConsensusConfig`, `RPCConfig`
  - This affects the following flags:
    - `--seeds` is now `--p2p.seeds`
    - `--node_laddr` is now `--p2p.laddr`
    - `--pex` is now `--p2p.pex`
    - `--skip_upnp` is now `--p2p.skip_upnp`
    - `--rpc_laddr` is now `--rpc.laddr`
    - `--grpc_laddr` is now `--rpc.grpc_laddr`
  - Any configuration option now within a substract must come under that heading in the `config.toml`, for instance:
    ```
    [p2p]
    laddr="tcp://1.2.3.4:46656"

    [consensus]
    timeout_propose=1000
    ```
  - Use viper and `DefaultConfig() / TestConfig()` functions to handle defaults, and remove `config/tendermint` and `config/tendermint_test`
  - Change some function and method signatures to
  - Change some [function and method signatures](https://gist.github.com/ebuchman/640d5fc6c2605f73497992fe107ebe0b) accomodate new config

- Logger
  - Replace static `log15` logger with a simple interface, and provide a new implementation using `go-kit`.
See our new [logging library](https://github.com/tendermint/tmlibs/log) and [blog post](https://tendermint.com/blog/abstracting-the-logger-interface-in-go) for more details
  - Levels `warn` and `notice` are removed (you may need to change them in your `config.toml`!)
  - Change some [function and method signatures](https://gist.github.com/ebuchman/640d5fc6c2605f73497992fe107ebe0b) to accept a logger

- JSON serialization:
  - Replace `[TypeByte, Xxx]` with `{"type": "some-type", "data": Xxx}` in RPC and all `.json` files by using `go-wire/data`. For instance, a public key is now:
    ```
    "pub_key": {
      "type": "ed25519",
      "data": "83DDF8775937A4A12A2704269E2729FCFCD491B933C4B0A7FFE37FE41D7760D0"
    }
    ```
  - Remove type information about RPC responses, so `[TypeByte, {"jsonrpc": "2.0", ... }]` is now just `{"jsonrpc": "2.0", ... }`
  - Change `[]byte` to `data.Bytes` in all serialized types (for hex encoding)
  - Lowercase the JSON tags in `ValidatorSet` fields
  - Introduce `EventDataInner` for serializing events

- Other:
  - Send InitChain message in handshake if `appBlockHeight == 0`
  - Do not include the `Accum` field when computing the validator hash. This makes the ValidatorSetHash unique for a given validator set, rather than changing with every block (as the Accum changes)
  - Unsafe RPC calls are not enabled by default. This includes `/dial_seeds`, and all calls prefixed with `unsafe`. Use the `--rpc.unsafe` flag to enable.


FEATURES:

- Per-module log levels. For instance, the new default is `state:info,*:error`, which means the `state` package logs at `info` level, and everything else logs at `error` level
- Log if a node is validator or not in every consensus round
- Use ldflags to set git hash as part of the version
- Ignore `address` and `pub_key` fields in `priv_validator.json` and overwrite them with the values derrived from the `priv_key`

IMPROVEMENTS:

- Merge `tendermint/go-p2p -> tendermint/tendermint/p2p` and `tendermint/go-rpc -> tendermint/tendermint/rpc/lib`
- Update paths for grand repo merge:
  - `go-common -> tmlibs/common`
  - `go-data -> go-wire/data`
  - All other `go-` libs, except `go-crypto` and `go-wire`, are merged under `tmlibs`
- No global loggers (loggers are passed into constructors, or preferably set with a SetLogger method)
- Return HTTP status codes with errors for RPC responses
- Limit `/blockchain_info` call to return a maximum of 20 blocks
- Use `.Wrap()` and `.Unwrap()` instead of eg. `PubKeyS` for `go-crypto` types
- RPC JSON responses use pretty printing (via `json.MarshalIndent`)
- Color code different instances of the consensus for tests
- Isolate viper to `cmd/tendermint/commands` and do not read config from file for tests


## 0.9.2 (April 26, 2017)

BUG FIXES:

- Fix bug in `ResetPrivValidator` where we were using the global config and log (causing external consumers, eg. basecoin, to fail).

## 0.9.1 (April 21, 2017)

FEATURES:

- Transaction indexing - txs are indexed by their hash using a simple key-value store; easily extended to more advanced indexers
- New `/tx?hash=X` endpoint to query for transactions and their DeliverTx result by hash. Optionally returns a proof of the tx's inclusion in the block
- `tendermint testnet` command initializes files for a testnet

IMPROVEMENTS:

- CLI now uses Cobra framework
- TMROOT is now TMHOME (TMROOT will stop working in 0.10.0)
- `/broadcast_tx_XXX` also returns the Hash (can be used to query for the tx)
- `/broadcast_tx_commit` also returns the height the block was committed in
- ABCIResponses struct persisted to disk before calling Commit; makes handshake replay much cleaner
- WAL uses #ENDHEIGHT instead of #HEIGHT (#HEIGHT will stop working in 0.10.0)
- Peers included via `--seeds`, under `seeds` in the config, or in `/dial_seeds` are now persistent, and will be reconnected to if the connection breaks

BUG FIXES:

- Fix bug in fast-sync where we stop syncing after a peer is removed, even if they're re-added later
- Fix handshake replay to handle validator set changes and results of DeliverTx when we crash after app.Commit but before state.Save()

## 0.9.0 (March 6, 2017)

BREAKING CHANGES:

- Update ABCI to v0.4.0, where Query is now `Query(RequestQuery) ResponseQuery`, enabling precise proofs at particular heights:

```
message RequestQuery{
	bytes data = 1;
	string path = 2;
	uint64 height = 3;
	bool prove = 4;
}

message ResponseQuery{
	CodeType          code        = 1;
	int64             index       = 2;
	bytes             key         = 3;
	bytes             value       = 4;
	bytes             proof       = 5;
	uint64            height      = 6;
	string            log         = 7;
}
```


- `BlockMeta` data type unifies its Hash and PartSetHash under a `BlockID`:

```
type BlockMeta struct {
	BlockID BlockID `json:"block_id"` // the block hash and partsethash
	Header  *Header `json:"header"`   // The block's Header
}
```

- `ValidatorSet.Proposer` is exposed as a field and persisted with the `State`. Use `GetProposer()` to initialize or update after validator-set changes.

- `tendermint gen_validator` command output is now pure JSON

FEATURES:

- New RPC endpoint `/commit?height=X` returns header and commit for block at height `X`
- Client API for each endpoint, including mocks for testing

IMPROVEMENTS:

- `Node` is now a `BaseService`
- Simplified starting Tendermint in-process from another application
- Better organized Makefile
- Scripts for auto-building binaries across platforms
- Docker image improved, slimmed down (using Alpine), and changed from tendermint/tmbase to tendermint/tendermint
- New repo files: `CONTRIBUTING.md`, Github `ISSUE_TEMPLATE`, `CHANGELOG.md`
- Improvements on CircleCI for managing build/test artifacts
- Handshake replay is doen through the consensus package, possibly using a mockApp
- Graceful shutdown of RPC listeners
- Tests for the PEX reactor and DialSeeds

BUG FIXES:

- Check peer.Send for failure before updating PeerState in consensus
- Fix panic in `/dial_seeds` with invalid addresses
- Fix proposer selection logic in ValidatorSet by taking the address into account in the `accumComparable`
- Fix inconcistencies with `ValidatorSet.Proposer` across restarts by persisting it in the `State`


## 0.8.0 (January 13, 2017)

BREAKING CHANGES:

- New data type `BlockID` to represent blocks:

```
type BlockID struct {
	Hash        []byte        `json:"hash"`
	PartsHeader PartSetHeader `json:"parts"`
}
```

- `Vote` data type now includes validator address and index:

```
type Vote struct {
	ValidatorAddress []byte           `json:"validator_address"`
	ValidatorIndex   int              `json:"validator_index"`
	Height           int              `json:"height"`
	Round            int              `json:"round"`
	Type             byte             `json:"type"`
	BlockID          BlockID          `json:"block_id"` // zero if vote is nil.
	Signature        crypto.Signature `json:"signature"`
}
```

- Update TMSP to v0.3.0, where it is now called ABCI and AppendTx is DeliverTx
- Hex strings in the RPC are now "0x" prefixed


FEATURES:

- New message type on the ConsensusReactor, `Maj23Msg`, for peers to alert others they've seen a Maj23,
in order to track and handle conflicting votes intelligently to prevent Byzantine faults from causing halts:

```
type VoteSetMaj23Message struct {
	Height  int
	Round   int
	Type    byte
	BlockID types.BlockID
}
```

- Configurable block part set size
- Validator set changes
- Optionally skip TimeoutCommit if we have all the votes
- Handshake between Tendermint and App on startup to sync latest state and ensure consistent recovery from crashes
- GRPC server for BroadcastTx endpoint

IMPROVEMENTS:

- Less verbose logging
- Better test coverage (37% -> 49%)
- Canonical SignBytes for signable types
- Write-Ahead Log for Mempool and Consensus via tmlibs/autofile
- Better in-process testing for the consensus reactor and byzantine faults
- Better crash/restart testing for individual nodes at preset failure points, and of networks at arbitrary points
- Better abstraction over timeout mechanics

BUG FIXES:

- Fix memory leak in mempool peer
- Fix panic on POLRound=-1
- Actually set the CommitTime
- Actually send BeginBlock message
- Fix a liveness issues caused by Byzantine proposals/votes. Uses the new `Maj23Msg`.


## 0.7.4 (December 14, 2016)

FEATURES:

- Enable the Peer Exchange reactor with the `--pex` flag for more resilient gossip network (feature still in development, beware dragons)

IMPROVEMENTS:

- Remove restrictions on RPC endpoint `/dial_seeds` to enable manual network configuration

## 0.7.3 (October 20, 2016)

IMPROVEMENTS:

- Type safe FireEvent
- More WAL/replay tests
- Cleanup some docs

BUG FIXES:

- Fix deadlock in mempool for synchronous apps
- Replay handles non-empty blocks
- Fix race condition in HeightVoteSet

## 0.7.2 (September 11, 2016)

BUG FIXES:

- Set mustConnect=false so tendermint will retry connecting to the app

## 0.7.1 (September 10, 2016)

FEATURES:

- New TMSP connection for Query/Info
- New RPC endpoints:
	- `tmsp_query`
	- `tmsp_info`
- Allow application to filter peers through Query (off by default)

IMPROVEMENTS:

- TMSP connection type enforced at compile time
- All listen/client urls use a "tcp://" or "unix://" prefix

BUG FIXES:

- Save LastSignature/LastSignBytes to `priv_validator.json` for recovery
- Fix event unsubscribe
- Fix fastsync/blockchain reactor

## 0.7.0 (August 7, 2016)

BREAKING CHANGES:

- Strict SemVer starting now!
- Update to ABCI v0.2.0
- Validation types now called Commit
- NewBlock event only returns the block header


FEATURES:

- TMSP and RPC support TCP and UNIX sockets
- Addition config options including block size and consensus parameters
- New WAL mode `cswal_light`; logs only the validator's own votes
- New RPC endpoints:
	- for starting/stopping profilers, and for updating config
	- `/broadcast_tx_commit`, returns when tx is included in a block, else an error
	- `/unsafe_flush_mempool`, empties the mempool


IMPROVEMENTS:

- Various optimizations
- Remove bad or invalidated transactions from the mempool cache (allows later duplicates)
- More elaborate testing using CircleCI including benchmarking throughput on 4 digitalocean droplets

BUG FIXES:

- Various fixes to WAL and replay logic
- Various race conditions

## PreHistory

Strict versioning only began with the release of v0.7.0, in late summer 2016.
The project itself began in early summer 2014 and was workable decentralized cryptocurrency software by the end of that year.
Through the course of 2015, in collaboration with Eris Industries (now Monax Industries),
many additional features were integrated, including an implementation from scratch of the Ethereum Virtual Machine.
That implementation now forms the heart of [Burrow](https://github.com/hyperledger/burrow).
In the later half of 2015, the consensus algorithm was upgraded with a more asynchronous design and a more deterministic and robust implementation.

By late 2015, frustration with the difficulty of forking a large monolithic stack to create alternative cryptocurrency designs led to the
invention of the Application Blockchain Interface (ABCI), then called the Tendermint Socket Protocol (TMSP).
The Ethereum Virtual Machine and various other transaction features were removed, and Tendermint was whittled down to a core consensus engine
driving an application running in another process.
The ABCI interface and implementation were iterated on and improved over the course of 2016,
until versioned history kicked in with v0.7.0.