@JoeKash, @githubsands, @jeebster, @crypto-facs, @liamsi, and @gotjoshua
### FEATURES
- [cli] [#7033](https://github.com/tendermint/tendermint/pull/7033) Add a `rollback` command to rollback to the previous tendermint state in the event of an incorrect app hash. (@cmwaters)
- [config] \#7174 expose ability to write config to arbitrary paths. (@tychoish)
- [config] [\#7174](https://github.com/tendermint/tendermint/pull/7174) expose ability to write config to arbitrary paths. (@tychoish)
- [\#6982](https://github.com/tendermint/tendermint/pull/6982) tendermint binary has built-in suppport for running the e2e application (with state sync support) (@cmwaters).
- [config] Add `--mode` flag and config variable. See [ADR-52](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-052-tendermint-mode.md) @dongsam
- [rpc] [\#6329](https://github.com/tendermint/tendermint/pull/6329) Don't cap page size in unsafe mode (@gotjoshua, @cmwaters)
- [pex] [\#6305](https://github.com/tendermint/tendermint/pull/6305) v2 pex reactor with backwards compatability. Introduces two new pex messages to
accomodate for the new p2p stack. Removes the notion of seeds and crawling. All peer
exchange reactors behave the same. (@cmwaters)
- [crypto] [\#6376](https://github.com/tendermint/tendermint/pull/6376) Enable sr25519 as a validator key type
- [mempool] [\#6466](https://github.com/tendermint/tendermint/pull/6466) Introduction of a prioritized mempool. (@alexanderbez)
- `Priority` and `Sender` have been introduced into the `ResponseCheckTx` type, where the `priority` will determine the prioritization of
the transaction when a proposer reaps transactions for a block proposal. The `sender` field acts as an index.
- Operators may toggle between the legacy mempool reactor, `v0`, and the new prioritized reactor, `v1`, by setting the
`mempool.version` configuration, where `v1` is the default configuration.
- Applications that do not specify a priority, i.e. zero, will have transactions reaped by the order in which they are received by the node.
- Transactions are gossiped in FIFO order as they are in `v0`.
- [config/indexer] [\#6411](https://github.com/tendermint/tendermint/pull/6411) Introduce support for custom event indexing data sources, specifically PostgreSQL. (@JayT106)
- [blocksync/event] [\#6619](https://github.com/tendermint/tendermint/pull/6619) Emit blocksync status event when switching consensus/blocksync (@JayT106)
- [statesync/event] [\#6700](https://github.com/tendermint/tendermint/pull/6700) Emit statesync status start/end event (@JayT106)
- [inspect] [\#6785](https://github.com/tendermint/tendermint/pull/6785) Add a new `inspect` command for introspecting the state and block store of a crashed tendermint node. (@williambanfield)
### BUG FIXES
- [\#7106](https://github.com/tendermint/tendermint/pull/7106) Revert mutex change to ABCI Clients (@tychoish).
- [\#7142](https://github.com/tendermint/tendermint/pull/7142) mempool: remove panic when recheck-tx was not sent to ABCI application (@williambanfield).
wait until peerUpdates channel is closed to close remaining peers (@williambanfield)
## v0.35.0-rc2
September 27, 2021
- [privval] [\#5638](https://github.com/tendermint/tendermint/pull/5638) Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
- [evidence] [\#6375](https://github.com/tendermint/tendermint/pull/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (cmwaters)
- [rpc] [\#6507](https://github.com/tendermint/tendermint/pull/6507) Ensure RPC client can handle URLs without ports (@JayT106)
- [statesync] [\#6463](https://github.com/tendermint/tendermint/pull/6463) Adds Reverse Sync feature to fetch historical light blocks after state sync in order to verify any evidence (@cmwaters)
- [blocksync] [\#6590](https://github.com/tendermint/tendermint/pull/6590) Update the metrics during blocksync (@JayT106)
### BREAKING CHANGES
@ -44,53 +56,6 @@ September 27, 2021
- [state] [store] [proxy] [rpc/core]: [\#6937](https://github.com/tendermint/tendermint/pull/6937) move packages to
`internal` to prevent consumption of these internal APIs by
external users. (@tychoish)
### FEATURES
- [\#6982](https://github.com/tendermint/tendermint/pull/6982) tendermint binary has built-in suppport for running the e2e application (with state sync support) (@cmwaters).
## v0.35.0-rc1
September 8, 2021
Special thanks to external contributors on this release: @JayT106, @bipulprasad, @alessio, @Yawning, @silasdavis,
@cuonglm, @tanyabouman, @JoeKash, @githubsands, @jeebster, @crypto-facs, @liamsi, and @gotjoshua
### BREAKING CHANGES
- CLI/RPC/Config
- [pubsub/events] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `ResultEvent.Events` field is now of type `[]abci.Event` preserving event order instead of `map[string][]string`. (@alexanderbez)
- [config] [\#5598](https://github.com/tendermint/tendermint/pull/5598) The `test_fuzz` and `test_fuzz_config` P2P settings have been removed. (@erikgrinaker)
- [config] [\#5728](https://github.com/tendermint/tendermint/pull/5728) `fastsync.version = "v1"` is no longer supported (@melekes)
- [cli] [\#5772](https://github.com/tendermint/tendermint/pull/5772) `gen_node_key` prints JSON-encoded `NodeKey` rather than ID and does not save it to `node_key.json` (@melekes)
- [cli] [\#5777](https://github.com/tendermint/tendermint/pull/5777) use hyphen-case instead of snake_case for all cli commands and config parameters (@cmwaters)
- [rpc] [\#6019](https://github.com/tendermint/tendermint/pull/6019) standardise RPC errors and return the correct status code (@bipulprasad &@cmwaters)
- [rpc] [\#6168](https://github.com/tendermint/tendermint/pull/6168) Change default sorting to desc for `/tx_search` results (@melekes)
- [cli] [\#6282](https://github.com/tendermint/tendermint/pull/6282) User must specify the node mode when using `tendermint init` (@cmwaters)
- [state/indexer] [\#6382](https://github.com/tendermint/tendermint/pull/6382) reconstruct indexer, move txindex into the indexer package (@JayT106)
- [cli] [\#6372](https://github.com/tendermint/tendermint/pull/6372) Introduce `BootstrapPeers` as part of the new p2p stack. Peers to be connected on startup (@cmwaters)
- [config] [\#6462](https://github.com/tendermint/tendermint/pull/6462) Move `PrivValidator` configuration out of `BaseConfig` into its own section. (@tychoish)
- [rpc] [\#6610](https://github.com/tendermint/tendermint/pull/6610) Add MaxPeerBlockHeight into /status rpc call (@JayT106)
- [blocksync/rpc] [\#6620](https://github.com/tendermint/tendermint/pull/6620) Add TotalSyncedTime & RemainingTime to SyncInfo in /status RPC (@JayT106)
- [rpc/grpc] [\#6725](https://github.com/tendermint/tendermint/pull/6725) Mark gRPC in the RPC layer as deprecated.
- [blocksync/v2] [\#6730](https://github.com/tendermint/tendermint/pull/6730) Fast Sync v2 is deprecated, please use v0
- [rpc] Add genesis_chunked method to support paginated and parallel fetching of large genesis documents.
- [rpc/jsonrpc/server] [\#6785](https://github.com/tendermint/tendermint/pull/6785) `Listen` function updated to take an `int` argument, `maxOpenConnections`, instead of an entire config object. (@williambanfield)
- [rpc] [\#6820](https://github.com/tendermint/tendermint/pull/6820) Update RPC methods to reflect changes in the p2p layer, disabling support for `UnsafeDialPeers` and `UnsafeDialPeers` when used with the new p2p layer, and changing the response format of the peer list in `NetInfo` for all users.
- [cli] [\#6854](https://github.com/tendermint/tendermint/pull/6854) Remove deprecated snake case commands. (@tychoish)
- Apps
- [ABCI] [\#6408](https://github.com/tendermint/tendermint/pull/6408) Change the `key` and `value` fields from `[]byte` to `string` in the `EventAttribute` type. (@alexanderbez)
- [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Remove `SetOption` method from `ABCI.Client` interface
- [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Reset `Oneof` indexes for `Request` and `Response`.
- [ABCI] [\#5818](https://github.com/tendermint/tendermint/pull/5818) Use protoio for msg length delimitation. Migrates from int64 to uint64 length delimiters.
- [ABCI] [\#3546](https://github.com/tendermint/tendermint/pull/3546) Add `mempool_error` field to `ResponseCheckTx`. This field will contain an error string if Tendermint encountered an error while adding a transaction to the mempool. (@williambanfield)
- [Version] [\#6494](https://github.com/tendermint/tendermint/pull/6494) `TMCoreSemVer` has been renamed to `TMVersion`.
- It is not required any longer to set ldflags to set version strings
- [abci/counter] [\#6684](https://github.com/tendermint/tendermint/pull/6684) Delete counter example app
- Go API
- [pubsub] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `Query#Matches` method along with other pubsub methods, now accepts a `[]abci.Event` instead of `map[string][]string`. (@alexanderbez)
- [p2p] [\#6618](https://github.com/tendermint/tendermint/pull/6618) [\#6583](https://github.com/tendermint/tendermint/pull/6583) Move `p2p.NodeInfo`, `p2p.NodeID` and `p2p.NetAddress` into `types` to support use in external packages. (@tychoish)
- [node] [\#6540](https://github.com/tendermint/tendermint/pull/6540) Reduce surface area of the `node` package by making most of the implementation details private. (@tychoish)
@ -126,34 +91,45 @@ Special thanks to external contributors on this release: @JayT106, @bipulprasad,
- [config] [\#6627](https://github.com/tendermint/tendermint/pull/6627) Extend `config` to contain methods `LoadNodeKeyID` and `LoadorGenNodeKeyID`
- [blocksync] [\#6755](https://github.com/tendermint/tendermint/pull/6755) Rename `FastSync` and `Blockchain` package to `BlockSync` (@cmwaters)
- Data Storage
- [store/state/evidence/light] [\#5771](https://github.com/tendermint/tendermint/pull/5771) Use an order-preserving varint key encoding (@cmwaters)
- [mempool] [\#6396](https://github.com/tendermint/tendermint/pull/6396) Remove mempool's write ahead log (WAL), (previously unused by the tendermint code). (@tychoish)
- [state] [\#6541](https://github.com/tendermint/tendermint/pull/6541) Move pruneBlocks from consensus/state to state/execution. (@JayT106)
- CLI/RPC/Config
- Tooling
- [pubsub/events] [\#6634](https://github.com/tendermint/tendermint/pull/6634) The `ResultEvent.Events` field is now of type `[]abci.Event` preserving event order instead of `map[string][]string`. (@alexanderbez)
- [config] [\#5598](https://github.com/tendermint/tendermint/pull/5598) The `test_fuzz` and `test_fuzz_config` P2P settings have been removed. (@erikgrinaker)
- [config] [\#5728](https://github.com/tendermint/tendermint/pull/5728) `fastsync.version = "v1"` is no longer supported (@melekes)
- [cli] [\#5772](https://github.com/tendermint/tendermint/pull/5772) `gen_node_key` prints JSON-encoded `NodeKey` rather than ID and does not save it to `node_key.json` (@melekes)
- [cli] [\#5777](https://github.com/tendermint/tendermint/pull/5777) use hyphen-case instead of snake_case for all cli commands and config parameters (@cmwaters)
- [rpc] [\#6019](https://github.com/tendermint/tendermint/pull/6019) standardise RPC errors and return the correct status code (@bipulprasad &@cmwaters)
- [rpc] [\#6168](https://github.com/tendermint/tendermint/pull/6168) Change default sorting to desc for `/tx_search` results (@melekes)
- [cli] [\#6282](https://github.com/tendermint/tendermint/pull/6282) User must specify the node mode when using `tendermint init` (@cmwaters)
- [state/indexer] [\#6382](https://github.com/tendermint/tendermint/pull/6382) reconstruct indexer, move txindex into the indexer package (@JayT106)
- [cli] [\#6372](https://github.com/tendermint/tendermint/pull/6372) Introduce `BootstrapPeers` as part of the new p2p stack. Peers to be connected on startup (@cmwaters)
- [config] [\#6462](https://github.com/tendermint/tendermint/pull/6462) Move `PrivValidator` configuration out of `BaseConfig` into its own section. (@tychoish)
- [rpc] [\#6610](https://github.com/tendermint/tendermint/pull/6610) Add MaxPeerBlockHeight into /status rpc call (@JayT106)
- [blocksync/rpc] [\#6620](https://github.com/tendermint/tendermint/pull/6620) Add TotalSyncedTime & RemainingTime to SyncInfo in /status RPC (@JayT106)
- [rpc/grpc] [\#6725](https://github.com/tendermint/tendermint/pull/6725) Mark gRPC in the RPC layer as deprecated.
- [blocksync/v2] [\#6730](https://github.com/tendermint/tendermint/pull/6730) Fast Sync v2 is deprecated, please use v0
- [rpc] Add genesis_chunked method to support paginated and parallel fetching of large genesis documents.
- [rpc/jsonrpc/server] [\#6785](https://github.com/tendermint/tendermint/pull/6785) `Listen` function updated to take an `int` argument, `maxOpenConnections`, instead of an entire config object. (@williambanfield)
- [rpc] [\#6820](https://github.com/tendermint/tendermint/pull/6820) Update RPC methods to reflect changes in the p2p layer, disabling support for `UnsafeDialPeers` and `UnsafeDialPeers` when used with the new p2p layer, and changing the response format of the peer list in `NetInfo` for all users.
- [cli] [\#6854](https://github.com/tendermint/tendermint/pull/6854) Remove deprecated snake case commands. (@tychoish)
- [tools] [\#6498](https://github.com/tendermint/tendermint/pull/6498) Set OS home dir to instead of the hardcoded PATH. (@JayT106)
- [cli/indexer] [\#6676](https://github.com/tendermint/tendermint/pull/6676) Reindex events command line tooling. (@JayT106)
### FEATURES
- Apps
- [config] Add `--mode` flag and config variable. See [ADR-52](https://github.com/tendermint/tendermint/blob/master/docs/architecture/adr-052-tendermint-mode.md) @dongsam
- [rpc] [\#6329](https://github.com/tendermint/tendermint/pull/6329) Don't cap page size in unsafe mode (@gotjoshua, @cmwaters)
- [pex] [\#6305](https://github.com/tendermint/tendermint/pull/6305) v2 pex reactor with backwards compatability. Introduces two new pex messages to
accomodate for the new p2p stack. Removes the notion of seeds and crawling. All peer
exchange reactors behave the same. (@cmwaters)
- [crypto] [\#6376](https://github.com/tendermint/tendermint/pull/6376) Enable sr25519 as a validator key type
- [mempool] [\#6466](https://github.com/tendermint/tendermint/pull/6466) Introduction of a prioritized mempool. (@alexanderbez)
- `Priority` and `Sender` have been introduced into the `ResponseCheckTx` type, where the `priority` will determine the prioritization of
the transaction when a proposer reaps transactions for a block proposal. The `sender` field acts as an index.
- Operators may toggle between the legacy mempool reactor, `v0`, and the new prioritized reactor, `v1`, by setting the
`mempool.version` configuration, where `v1` is the default configuration.
- Applications that do not specify a priority, i.e. zero, will have transactions reaped by the order in which they are received by the node.
- Transactions are gossiped in FIFO order as they are in `v0`.
- [config/indexer] [\#6411](https://github.com/tendermint/tendermint/pull/6411) Introduce support for custom event indexing data sources, specifically PostgreSQL. (@JayT106)
- [blocksync/event] [\#6619](https://github.com/tendermint/tendermint/pull/6619) Emit blocksync status event when switching consensus/blocksync (@JayT106)
- [statesync/event] [\#6700](https://github.com/tendermint/tendermint/pull/6700) Emit statesync status start/end event (@JayT106)
- [inspect] [\#6785](https://github.com/tendermint/tendermint/pull/6785) Add a new `inspect` command for introspecting the state and block store of a crashed tendermint node. (@williambanfield)
- [ABCI] [\#6408](https://github.com/tendermint/tendermint/pull/6408) Change the `key` and `value` fields from `[]byte` to `string` in the `EventAttribute` type. (@alexanderbez)
- [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Remove `SetOption` method from `ABCI.Client` interface
- [ABCI] [\#5447](https://github.com/tendermint/tendermint/pull/5447) Reset `Oneof` indexes for `Request` and `Response`.
- [ABCI] [\#5818](https://github.com/tendermint/tendermint/pull/5818) Use protoio for msg length delimitation. Migrates from int64 to uint64 length delimiters.
- [ABCI] [\#3546](https://github.com/tendermint/tendermint/pull/3546) Add `mempool_error` field to `ResponseCheckTx`. This field will contain an error string if Tendermint encountered an error while adding a transaction to the mempool. (@williambanfield)
- [Version] [\#6494](https://github.com/tendermint/tendermint/pull/6494) `TMCoreSemVer` has been renamed to `TMVersion`.
- It is not required any longer to set ldflags to set version strings
- [abci/counter] [\#6684](https://github.com/tendermint/tendermint/pull/6684) Delete counter example app
- Data Storage
- [store/state/evidence/light] [\#5771](https://github.com/tendermint/tendermint/pull/5771) Use an order-preserving varint key encoding (@cmwaters)
- [mempool] [\#6396](https://github.com/tendermint/tendermint/pull/6396) Remove mempool's write ahead log (WAL), (previously unused by the tendermint code). (@tychoish)
- [state] [\#6541](https://github.com/tendermint/tendermint/pull/6541) Move pruneBlocks from consensus/state to state/execution. (@JayT106)
### IMPROVEMENTS
@ -198,14 +174,6 @@ Special thanks to external contributors on this release: @JayT106, @bipulprasad,
- [cmd/tendermint/commands] [\#6623](https://github.com/tendermint/tendermint/pull/6623) replace `$HOME/.some/test/dir` with `t.TempDir` (@tanyabouman)
- [statesync] \6807 Implement P2P state provider as an alternative to RPC (@cmwaters)
### BUG FIXES
- [privval] [\#5638](https://github.com/tendermint/tendermint/pull/5638) Increase read/write timeout to 5s and calculate ping interval based on it (@JoeKash)
- [evidence] [\#6375](https://github.com/tendermint/tendermint/pull/6375) Fix bug with inconsistent LightClientAttackEvidence hashing (cmwaters)
- [rpc] [\#6507](https://github.com/tendermint/tendermint/pull/6507) Ensure RPC client can handle URLs without ports (@JayT106)
- [statesync] [\#6463](https://github.com/tendermint/tendermint/pull/6463) Adds Reverse Sync feature to fetch historical light blocks after state sync in order to verify any evidence (@cmwaters)
- [blocksync] [\#6590](https://github.com/tendermint/tendermint/pull/6590) Update the metrics during blocksync (@JayT106)
M. J. Fromberger
3 years ago
GitHub