* optimize the main scan/iwinfo call (performance & system load):
- remove a needless f_trim function call
- remove a redundant awk call
- reduce the scan buffer size and
make it configurable (trm_scanbuffer, default 1024 bytes)
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add a 'Net Error Check' which treats a missing
internet availability as an error (disabled by default)
* add a 'List Auto Expiry' which automatically resets
the 'Faulty Stations' list after n minutes,
default is '0' which means no expiry (old behaviour).
* rework major parts of the check subroutine
* add both features to LuCI frontend (separate PR/commit)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix a json related ressource leak
* add a reload trigger when the wireless config gets changed
* set an interface default 'trm_wwan' (like the LuCI frontend)
* reordered nested loops to optimize the connection handling
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix for #8357
* fix unexpectedy calling option_cb() during wireless config_load
* react immediately when the current active uplink connection
gets deleted
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add captive portal domains automatically to the related
domain whitelist (dhcp option 'rebind_domain'),
if rebind protection/RFC1918 is enabled
Signed-off-by: Dirk Brenken <dev@brenken.org>
* remove the "--spider" download option from captive portal
detection to make the heartbeat function more robust.
Keep the uplink connection 'alive' with all sorts of portals.
Signed-off-by: Dirk Brenken <dev@brenken.org>
* proactively scan and switch to a higher prioritized uplink,
despite of an already existing connection,
this is configurable via 'trm_proactive' option
(default '1', enabled)
* fix some minor list trim issues
* optimize wlan scanning behavior
* refine debug messages
Signed-off-by: Dirk Brenken <dev@brenken.org>
* with the config option 'trm_radio' you can now restrict travelmate
to a single radio (e.g. 'radio1') or change the overall
scanning order (e.g. 'radio1 radio2 radio0')
* LuCI: show QR codes now inline on the overview page
(collapsed by default)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* remove needless third status "not connected", use only "running / not
connected" and "connected"
* change indentation from spaces to tabs (saves 4kb)
* small fixes
* update readme
Signed-off-by: Dirk Brenken <dev@brenken.org>
* fix restart behaviour after successful connection
* fix labeling of faulty stations
* optimize re-connect behaviour at locations where multiple uplinks with
the same SSID are in range
* use procd pidfile handling
* refine logging
* small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer rename faulty uplinks in /etc/config/wireless, but save
uplink state in json runtime information. To reset the saved state
simply restart travelmate processing.
Signed-off-by: Dirk Brenken <dev@brenken.org>
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
* checks continuously the signal quality for conditional
uplink (dis-) connections
* captive portal detection with internet online check and
a 'heartbeat' function to keep the uplink connection up & running
Signed-off-by: Dirk Brenken <dev@brenken.org>
* corner case fix with multiple (partly disabled) radios
* LuCI: BSSID will be ignored by default in 'wireless add' dialog
* LuCI: Textarea 'autoscroll down' in logfile view
* LuCI: refine logfile search term
Signed-off-by: Dirk Brenken <dev@brenken.org>
* limit sta interface selection/handling
to defined travelmate interface (trm_iface) only
* check eap capabilities and ignore enterprise uplinks
as long as eap support is not available
* documentation update
* cosmetics
* LuCI: various cleanups
Signed-off-by: Dirk Brenken <dev@brenken.org>
* backend/frontend: supports a Connection Limit ('trm_maxretry')
of '0', to disable this feature (unlimited retries)
Signed-off-by: Dirk Brenken <dev@brenken.org>
0.9.1
backend:
* load procd reload trigger only in 'manual' mode
* documentation update
frontend:
* further optimized Station Overview & Scan page,
especially for mobile devices
* add a "Rescan" button in manual mode on overview page
* XHTML fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
backend:
* handle errors due to misconfigured uplinks
* various bugfixes
luci frontend:
* add a powerful wireless station manager to edit and delete existing
interfaces or scan for new uplinks
Signed-off-by: Dirk Brenken <dev@brenken.org>
* wait for hostapd comes up during boot
* remove needless ubus call during script startup
* remove needless iwinfo check (covered by package dependency)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* use iwinfo instead iw for wlan scanning,
scanning now works on radio-level
* enhance multiple radio support:
* support STA-only radio configurations,
e.g first radio with local AP, second radio
with a bunch of STAs (without APs)
Signed-off-by: Dirk Brenken <dev@brenken.org>
* always update the connection status, even in case of an error
* merge multiple ubus network calls in central check routine
Signed-off-by: Dirk Brenken <dev@brenken.org>
* no longer misuse ubus/procd service object for travelmate runtime
information, now save all required information directly
in a JSON file/format
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested & slow modem/router setups, set 'trm_triggerdelay' accordingly
* change start priority & refine reload timings
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* rework automatic mode (active scan/re-connection handling):
* much more procd & resource friendly
* now enabled by default
* save runtime information in ubus service (data section)
* final backend preparation for new LuCI-GUI (still WIP!)
* documentation update
Signed-off-by: Dirk Brenken <dev@brenken.org>
For consistency, use full name instead of $(PKG_NAME) in define and eval
lines for all packages.
I've seen reviews that asked to do this before, and I am asking the same
during reviews now. To avoid this in the future, fix this treewide so
when people use existing packages as example, we will not have to
request this change anymore.
This makes all packages consistent with both LEDE and OpenWrt base
repositories.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* optimized connection handling -
removed needless timeouts & wireless commits
* set the pre-configured reload timeout to
a more conservative/realistic value of 30 seconds
* further logging tweaks
Signed-off-by: Dirk Brenken <dev@brenken.org>
Dirk Brenken
Stijn Tintel