Assuming the following dns zone configuration for kresin.me:
. 1800 IN NS ns.inwx.de.
home.kresin.me. 1800 IN NS gw.home.kresin.me.
gw.home.kresin.me. 60 IN A 198.51.100.1
Using the example, gw.home.kresin.me is a glue record and used as DDNS
record as well. gw.home.kresin.me points to the OpenWrt installation
where the ddns-scripts are running.
Since ns.inwx.de isn't the authoritative server for home.kresin.me,
a query for the the A record of gw.home.kresin.me will be "forwarded"
to and replied by the authoritative server 198.51.100.1. If the
authoritative server can't be reached, the query times out without any
address returned.
The only way to get the A record of the glue record is to use bind
host in verbose output mode, query ns.inwx.de for gw.home.kresin.me and
evaluate the additional section of the response.
To my knowledge, only bind host in verbose output mode shows the
additional section of the response. Therefore, this features depends on
bind host.
It is not possible to use the bind host verbose mode for all queries.
In verbose mode the "has address" line isn't returned. Grepping for the
hostname might fail if the hostname is CNAME. Grepping for the first
occurrence of an ip-address is way to error prone, since it could
return the ip address of a different record type.
Signed-off-by: Mathias Kresin <dev@kresin.me>
ktutil_funcs.c: In function 'ktutil_delete':
ktutil_funcs.c:75:28: error: 'prev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Signed-off-by: John Crispin <john@phrozen.org>
Add back from oldpackages with fixes for build errors and UCIfication
(for LuCI app submitted in a related PR (against LuCI repo)).
NOTE: Untested packages have been marked with @BROKEN. This can
be undone of others report success with the sniffer
Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
If the liblz4 library exists within the build environment, the openconnect
configure will pick it up and start depending on it, leading to the following
build error:
Package openconnect is missing dependencies for the following libraries:
liblz4.so.1
Disable LZ4 support in configure in order to avoid this implicit,
nondeterministic dependency.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Mark the usbip package nonshared so that is built along with the target
specific binaries and not within the SDK environment.
This is needed since the usbip package draws its source files directly
from the kernel tree which is unavailable within the SDK.
Fixes the following build error encountered by the LEDE buildbots:
http://downloads.lede-project.org/snapshots/faillogs/mipsel_1004kc_dsp/packages/usbip/compile.txt
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The most recent developer of netdiscover had self-hosted downloads
but also put the project on SourceForge. The self-hosted site went
down but SourceForge is much more reliable so I have moved the
download URI to SourceForge (md5sum is the same).
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
- add DNS lookup support for "drill" and "khost" (Knot DNS) #2637
- new service nsupdate.info (IPv4 and IPv6) #2433
- new services dyndnss.net, dyns.net (IPv4 only)
- new services dnshome.de, goip.de, myonlineportal.net (IPv4 and IPv6)
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* push gnurl, gnutls and libmicrohttpd dependencies down to modules
* use standard UID/GID for gnunet (958/958)
* use GID adjecent (452) to dnsmasq (453) for gnunetdns to allow
using the owner match with a range of GIDs (452-452)
* package new gnunet-social pub/sub CLI tool
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Fixes the following CVEs:
Bug 3020 / CVE-2016-1551: Refclock impersonation vulnerability, AKA: refclock-peering
Reported by Matt Street and others of Cisco ASIG
Bug 3012 / CVE-2016-1549: Sybil vulnerability: ephemeral association attack, AKA: ntp-sybil - MITIGATION ONLY
Reported by Matthew Van Gundy of Cisco ASIG
Bug 3011 / CVE-2016-2516: Duplicate IPs on unconfig directives will cause an assertion botch
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3010 / CVE-2016-2517: Remote configuration trustedkey/requestkey values are not properly validated
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3009 / CVE-2016-2518: Crafted addpeer with hmode > 7 causes array wraparound with MATCH_ASSOC
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3008 / CVE-2016-2519: ctl_getitem() return value not always checked
Reported by Yihan Lian of the Cloud Security Team, Qihoo 360
Bug 3007 / CVE-2016-1547: Validate crypto-NAKs, AKA: nak-dos
Reported by Stephen Gray and Matthew Van Gundy of Cisco ASIG
Bug 2978 / CVE-2016-1548: Interleave-pivot - MITIGATION ONLY
Reported by Miroslav Lichvar of RedHat and separately by Jonathan Gardner of Cisco ASIG
Bug 2952 / CVE-2015-7704: KoD fix: peer associations were broken by the fix for NtpBug2901, AKA: Symmetric active/passive mode is broken
Reported by Michael Tatarinov, NTP Project Developer Volunteer
Bug 2945 / Bug 2901 / CVE-2015-8138: Zero Origin Timestamp Bypass, AKA: Additional KoD Checks
Reported by Jonathan Gardner of Cisco ASIG
Bug 2879 / CVE-2016-1550: Improve NTP security against buffer comparison timing attacks, authdecrypt-timing, AKA: authdecrypt-timing
Reported independently by Loganaden Velvindron, and Matthew Van Gundy and Stephen Gray of Cisco ASIG.
Signed-off-by: Peter Wagner <tripolar@gmx.at>
OpenWrt offers a special 'prelocal' routing table at priority 0.
Use it, so local-to-local DNS traffic also gets redirected properly.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
fwknop Makefile had two conffiles sections. Combine them.
Remove also the whitespace from conffiles section (see #2652)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
The conffiles definition in Makefile should not contain leading whitespace.
Remove whitespace from Makefile of motion, dnscrypt-proxy and sstp-client.
Reference to discussion at #2652
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* support more router modes, as long as the firewall and the DNS server
are enabled
* new source sites can be added & changed via awk ruleset in uci config
* source domain count, last update time & overall count will be stored
in uci config
* added 3 new source sites:
ransomware tracker
rolist/easylist
winspy
* switch to minimal inline base64 encoded 1×1 GIF for pixel server
(separate png image no longer needed)
* simplified uci parser
* source download & domain sort optimization
* add whitelist parser with wildcard support
* reduced code size & various cleanups
* updated documentation
Signed-off-by: Dirk Brenken <openwrt@brenken.org>
Mathias Kresin
Xotic750
Hsing-Wang Liao
John Crispin
Maxim Storchak
Dirk Brenken
Yousong Zhou
Daniel Salzman
Karl Palsson
Daniel Dickinson
Nikos Mavrogiannopoulos
Daniel Golle
Jo-Philipp Wich
mogulapranay
Peter Wagner
Felix Fietkau
Dov Murik
Dirk Feytons
heil
Daniel Dickinson
Dirk Brenken
Christian Schoenebeck
Anthony Brown
Hannu Nyman
Marty R
Joel Johnson
Maximilian Mehnert
Dirk Brenken
Andreas Shimokawa
Gergely Kiss