libgd fails to build due to missing dependency if the libtiff
package is selected. Fix the build issue and add two new
configuration options, both disabled by default:
1) enable TIFF support, and
2) enable Freetype 2.x support.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
This was suggested by @hnyman because hg is not a prerequisite in
LEDE or Openwrt, so using that should be avoided, if possible.
The tricky part is that the filename is appended to the URL,
thus we construct/use an URL where the appended filename does not hurt.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
This patch tries to address the following package issues:
- the upstream hg repository seems to contain some invalid timestamps,
at least the following warning are generated during package compilation
(only one example):
emcy.c: Timestamp out of range; substituting 2514-05-30 01:53:03.999999999
This can be fixed by touching all files after unpacking, thus tar is
now given the -m switch.
- one or more LEDE buildbot(s) do not have hg tool installed and thus are not
able to checkout the sources from upstream
This patch populates PKG_MIRROR_HASH in the hope that the buildbot's first
try is to download an already packed source tarball prior to checkout it out
from upstream.
- While at packaging from upstream, use the common infrastructure, i.e. use
a source date etc. This also results in tar.xz files and thus reduces the
disk footprint a little bit.
- during compilation the follwing warning could be observed:
cc1: note: someone does not honour copts correctly, passed 0 times
To silent down these warning, patch the Makefiles and pass the expected
option.
Important note: changes are only compile tested due to missing hardware at
hand.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Avoid using 'hg' (Mercurial) to download sources.
'hg' is not an official prerequisite and it is not installed
in all buildslaves in Openwrt and LEDE buildbots, which
leads to frequent build failures.
Download the .tar.gz source archive instead.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This fixes a stupid typo from last commit which lead to the following
compiler warning:
cc1: warning: command line option '-std=c++11' is valid for C++/ObjC++ but not for C
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
This fixes the following build error (shortened paths for readability):
-snip-
In file included from .../php-7.1.4/ext/intl/intl_convertcpp.h:26:0,
from .../php-7.1.4/ext/intl/intl_convertcpp.cpp:21:
.../staging_dir/target-arm_arm926ej-s_musl_eabi/usr/include/unicode/unistr.h:56:16: error: 'UChar' does not name a type
u_strlen(const UChar *s);
^
.../staging_dir/target-arm_arm926ej-s_musl_eabi/usr/include/unicode/unistr.h:80:19: error: 'char16_t' has not been declared
char16_t *dest, int32_t destCapacity,
^
.../staging_dir/target-arm_arm926ej-s_musl_eabi/usr/include/unicode/unistr.h:81:25: error: 'char16_t' does not name a type
const char16_t *src, int32_t srcLength,
^
In file included from .../php-7.1.4/ext/intl/intl_convertcpp.h:26:0,
from .../php-7.1.4/ext/intl/intl_convertcpp.cpp:21:
.../staging_dir/target-arm_arm926ej-s_musl_eabi/usr/include/unicode/unistr.h:462:16: error: 'char16_t' does not name a type
const char16_t *srcChars) const;
^
[...]
-snap-
This build error was introduced by update of icu to 59.1.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
MUSL is complaining about <sys/poll.h> instead of <poll.h>.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
[ Replaced the *-t1lib filtering stuff by simply removing the
left-over configure option ]
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* change start priority to get all interface trigger events, even on
fast hardware
* made default trigger delay more conservative to fix possible start up
issues
Signed-off-by: Dirk Brenken <dev@brenken.org>
In case a toolchain supports OpenMP (e.g: external toolchains), just
disable support for it in libsoxr since cmake would detect that and
later we would fail to create the package because there is no libgomp
package being created.
In case OpenMP is desireable and this is supported by the toolchain, we
should introduce a specific option for that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
As reported by @thornley-touchstar, there are some issues in the
showshortport and showport commands on the monitoring channel.
After short dicussion with upstream, the following patches were merged
upstream to fix the issue(s).
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
As lcd4linux is all kinds of BROKEN lately, and of unknown status.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Harald Geyer <harald@ccbib.org>
If you have a firstboot script which seeds a passwd based on
run-time information (like MAC addresses, hostname, etc) then
you need to be able to pass in a cleartext string via chpasswd.
Other applets are similarly potentially useful in other corner
cases.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Filter support brings several useful features which many PHP applications
rely on. To make it easier for users who don't want to build own packages
enable this by default. This slightly increases the binary SAPI packages,
but since PHP is a huge monster anyway, I doubt this hurts anybody.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
darkstat's configure script searches for libbsd for different routines,
so if it manages to pick it up, make sure the dependency is reflected.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Use newest acme.sh release (2.6.8).
Remove dependency on ca-certificates and add dependency on ca-bundle.
Update environment variable.
Signed-off-by: Daniel Halmschlager <da@halms.at>
* no longer misuse ubus/procd service object for adblock runtime
information, now save all required information directly
in a JSON file/format (/tmp/adb_runtime.json)
* new 'status' init command to print runtime information
* add a configurable interface trigger timeout for
nested or slow modem/router setups,
set 'adb_triggerdelay' accordingly (default 1 second)
* add support for pure http download utilities like wget-nossl
or uclient-fetch without libustream-ssl (http donwloads only!)
* fix stop action
* fix enabled/disabled action
* fix country code in regional list for china
* LuCI update to reflect all changes
Signed-off-by: Dirk Brenken <dev@brenken.org>
The gettext extension is only useful when linked against libintl-full
package, however, the detection did not work sucessfully. This patch
by @Dimazhan fixes this.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
If interface is getting down by netifd (unplug ethernet cable)
mwan3track will not recognize this change. It will also generate an
additional down event when he notice does his tracking interface is offline.
Mwan3track will now be informed by a signal (trap) USR1 during down event
that the interface is already down. An additional down event will not be
generated.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
dibdot
doclm
Val Kulkov
Hannu Nyman
Michael Heimpold
Florian Fainelli
Matthew McClintock
Philip Prindeville
Daniel Engberg
Hirokazu MORIKAWA
Lucian Cristian
Shuanglei Tao
Daniel Golle
Daniel H
Kevin Darbyshire-Bryant
Florian Eckert