This should massively improve performance for (at least) MIPS targets:

    * poly1305: optimize unaligned access

    This is a very appreciated fix from René van Dorst, adjusting the
    arithmetic in Poly1305 to work fast on platforms with slow unaligned
    access, such as MIPS. According to his calculation, this gives a 50%
    improvement on small MIPS boxes.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>

Signed-off-by: Ted Hess <thess@kitschensync.net>

Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>

mii-tool: fix variable being declared too early

Also switch git to https.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>

adblock: update 1.4.10

- add 'enabled' check to iface hotplug event handler
- decrease startup priority from 99 to 90
- fix tab indentation in config

Signed-off-by: Dirk Brenken <dev@brenken.org>

Update libedit and Knot DNS

mwan3: remove bad local shell variable declarations

You can now specify in '/etc/config/network'

config interface 'eth1_autoip'
	option ifname	'eth1'
	option proto	'autoip'

And netifd would handle the rest of the logic/setup.

Signed-off-by: Claudiu Brasovean <cbrasho@gmail.com>
Signed-off-by: Ted Hess <thess@kitschensync.net>

ddns-scripts: fix reporting wrong version

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

Also switches git to https

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

Signed-off-by: Noah Meyerhans <frodo@morgul.net>

netdata: update to 1.3.0 and use procd init

ttyd: new package

Signed-off-by: Shuanglei Tao <tsl0922@gmail.com>

Update to 1.3.0
Change init.d script to use procd
Use release binary instead of git

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>

mii-tool: re-introduce from oldpackages

Both postgresql-server and postgresql-cli install /usr/bin/psql which
thus creates a conflict when installing both packages.
Fix this by removing duplicate and useless binaries from the
postgresql-server package.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ffmpeg: Update 2.8.8, add codecs, update dlna profile, correct libopus use

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>

hd-idle: convert init script to procd

sngrep: update to snapshot 2016-09-27

exfat-nofuse: update to snapshot 2016-09-26

Update snapshot and change PKG_VERSION layout to be more consistent with base packages.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Update snapshot and change PKG_VERSION layout to be more consistent with base packages.
Change bz2 to gz for consistency with other base packages.
Adds support for Linux 4.7 kernels.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

libstrophe: Update to version 0.9.1

Signed-off-by: Chih-Wei Chen <changeway@gmail.com>

dmidecode: use url alias

ddns-scripts: bump to version 2.7.5

remove postinst (of main package) from Makefile because all is done inside uci-defaults scripts

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

Update ffmpeg to 2.8.8.

Adds HEVC, Opus, VC-1 and Vorbis to custom and minidlna profiles. This should
more closely match formats media being streamed on the local network via
DLNA/UPNP.

Removes raw aac, ac3 and h264 from minidlna profile. Most players expect
this content to come within a container (mkv, mov, mp4, mpegts, etc...),
so this was unnecessary for the profile's goals.

Remove libopus from being selected by the -custom's audio-dec profile, and as
a depend on -audio-dec. -audio-dec uses ffmpeg's internal Opus decoder, not
the external library.

Don't select specific parsers in libffmpeg-mini profile. The demuxers separate
streams from containers. Parsers break up the streams. These are not needed
for DLNA/UPNP. If a parser is needed, the ffmpeg configure script should grab
it.

Signed-off-by: Ian Leonard <antonlacon@gmail.com>

commands to apply changes introduced during release changes, moved from Makefile postinst to /etc/uci-defaults

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

Use url alias instead of hardcoded URL.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

- add support of knsupdate (update_nsupdate.sh
- url update easydns.com
- add some service answers
- alphabetic reorder services files for easier reading
- rename services/provider (Makefile postinst handle /etc/config/ddns)
 -- freedns.afraid.org -> afraid.org
 -- free.editdns.net -> editdns.net
 -- domains.google.com -> google.com
 -- spdns.de -> spdyn.de
 -- strato.de -> strato.com
- new provider (looking in deep into https://sourceforge.net/projects/inadyn-mt project)
 -- dyn.com (= dyndns.org)
 -- ddnss.de
 -- dhis.org
 -- dnspark.com (IPv4 only)
 -- dynsip.org (IPv4 only)
 -- dynv6.com
 -- joker.com (IPv4 only)
 -- loopia.com (= loopia.se)
 -- sitelutions.com (IPv4 only)
 -- system-ns.com (IPv4 only)
- new provider (looking in deep into /etc.defaults/ddns_provider.conf file for Synology DiskStation published at https://gist.github.com/ntrepid8/6653274)
 -- able.or.kr (IPv4 only)
 -- ddo.jp (IPv4 only)
 -- dnsmadeeasy.com (IPv4 only)
 -- oray.com (IPv4 only)
- new provider (looking in deep into https://github.com/ipfire/ddns project)
 -- all-inkl.com
 -- desec.io
 -- domopoli.de (IPv4 only)
 -- opendns.com (IPv4 only)
 -- udmedia.de
 -- xlhost.de (IPv4 only)
- new provider (looking in deep into https://github.com/yaddns/yaddns project )
 -- dyndns.it (IPv4 only)

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

gdisk: new package

Add gdisk to repo

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

psidhu: Update Maintainer Email

Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>

Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>

gpsd: fix cross platform compilation

bmon: Update to 3.9

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>