This guarantees for the package feeds that
the mk files will always be available for all packages.
Will need to see about external-feed Python packages
a bit later.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The only difference just a parameter for Python3
[ -b to compile bytecodes in legacy mode ].
No need to keep 2 almost identical files now
that they're exported.
I'm a bit scared of that param, since it may get
removed at some point.
But let's see until then.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Since `lang/python` is it's own folder of Python packages
(for both Python 2 & 3), and these build rules are needed
in a lot of packages [especially Python packages],
putting them here makes sense architecturally,
to be shared.
This also helps get rid of the `include_mk` construct
which relies on OpenWrt core to provide, and seems
like a broken design idea that has persisted for a while.
Reason is: it requires that Python 2/3 be built to provide
these mk files for other Python packages,
which seems like a bad idea.
Long-term, there could be an issue where some other feeds
would require these mk files [e.g. telephony] for
some Python packages.
We'll see how we handle this a bit later.
For now we limit this to this feed.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The .mk snippets are not really usable at the moment, as they cannot be
considered for metadata collection (package DUMP) when included through
include_mk. Python packages do not use include_mk anymore for this reason,
so the install commands can be removed as well.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Build depends refer to source package names, not binary package names.
In many cases, PKG_BUILD_DEPENDS simply duplicated runtime dependencies of
a source package's binary packages; as the corresponding source packages
are implicitly added as bulid dependencies, PKG_BUILD_DEPENDS can simply be
dropped in these cases. In the other cases, *_BUILD_DEPENDS is fixed to
refer to the correct source package name.
Dependency of mysql-server is adjusted from libncursesw to libncurses
(as libncursesw is a virtual package provided by libncurses), so the build
dependency on ncurses is emitted unconditionally.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
This reverts commits 4333d1dcbf and
074d2863be, making Python packages
discoverable again by pkg_resources.
Fixes#5361.
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Also remove the superfluous + sign in PKG_BUILD_DEPENDS (a + sign does not
have meaning in build depends).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Remove a patch which was included upstream.
While at, also add openssl configuration parameters when modules are selected
which depend on openssl (reported by Philip Prindeville).
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
This reverts commit 3c6d14021e.
( which is a revert of commit c764f77dc1 )
The initiall commit ( c764f77dc1 )
was reverted, becase zlib did not have a host-build.
Now it does:
cbe71649bc
So, now it should be good to put this in.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Re-worked patch `003-do-not-run-distutils-tests.patch`
to reduce patch-size.
Removed `011-fix-ncursesw-definition-colisions.patch`
it is fixed upstream.
Refreshed with `make package/python3/refresh`
Resetting PKG_RELEASE to 1.
This variable was never used for pip3 & setuptools, since
VERSION is specified in the package definitions.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Fixes:
https://github.com/openwrt/packages/issues/5318
Not sure how this worked before.
The host python-cffi needs a libffi installed on the host side.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
The check to enable/disable this new feature of PHP 7.2 works
incorrectly when cross-compiling because it detects the host headers
only and there is no way to pass in a dedicated directory.
The wish to change this was reported upstream at:
https://bugs.php.net/bug.php?id=75722
For the meantime, use a self-cooked patch.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
This release includes some bug fixes and a security fix.
CVE-2017-17405: Command injection vulnerability in Net::FTP
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Also drop mcrypt module as it's deprecated.
Dropped patches have been accepted upstream or something homologous.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
See:
https://github.com/openwrt/packages/issues/5278
This should make Python & Python3 packages reproducible
when building.
In my local tests, I got the same sha256 for a sample
.pyc file, so likely this is the solution that should address
this.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This reverts commit c764f77dc1.
The commit caused warnings to be displayed at make defconfig etc.
WARNING: Makefile 'package/feeds/packages/python/python/Makefile'
has a host build dependency on 'zlib/host' but
'package/libs/zlib/Makefile' does not implement a 'host' build type
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
This should fix the zlibmodule build on the host side.
Usually, if zlib is not found, Python/Python3 builds fine
without it, but there are some cases where the Python/Python3
interpreter on the host-side requires zlib to run.
At the moment, zlib does not have a host-build.
This should be available when this PR gets merged:
https://github.com/lede-project/source/pull/1329
[ or a similar one that contains host-build support for zlib ].
In the meantime, this change can go into Python/Python3.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
It was reported via
https://github.com/openwrt/packages/pull/5122#issuecomment-347395472
that if bluez-libs is selected as an installable package,
then the error below will show up:
```
* satisfy_dependencies_for: Cannot satisfy the following dependencies for python-light:
* bluez-libs *
* opkg_install_cmd: Cannot install package python-light.
```
This looks like a limitation in the design of package deps,
and maybe a misuse of conditional deps (i.e. PACKAGE_bluez-libs:bluez-libs).
So, to fix this, an idea we're adding an extra symbol
that enfoces installation of bluez-libs if selected.
We also need to add a way to disable bluetooth build
if PYTHON(3)_BLUETOOTH_SUPPORT is de-selected.
Otherwise, bluetooth is installed and the socket
module is broken due to linker errors.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
This should improve build time if you only want to
build Python3 (and not Python).
Because python-pip-conf was part of the python package,
the whole python package (host + target) would get built if Python3
would need to get built.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
When libpam is selected, then mod_imap pulls in a dep to libpam,
and there seems no way to disable it via configure arguments.
So add this dep here conditionally.
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Detection of U8T_DECOMPOSE seems to be broken when cross-compiling,
so needs to be preseeded.
-snip-
checking for utf8_mime2text signature... new
checking for U8T_DECOMPOSE...
configure: error: utf8_mime2text() has new signature, but U8T_CANONICAL
is missing. This should not happen. Check config.log for additional information.
-snap-
This requires also a patch for PHP to make the preseeding working.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Add Freetype 2 support to php7-mod-gd. Introduce a configuration
parameter to disable Freetype 2 support if the increased package
size is a concern.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
This part of the Makefile was commented out during update from
PHP 5.x to 7.x and not re-enabled in the meanswhile, so fix this finally.
Reported-by: Val Kulkov <val.kulkov@gmail.com>
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
This should hopefully fix the Python3 build on buildbot.
For a while I assumed it may be a build-bot issue, but
then looking through the packages repo [and finding
the bluez package] it looks like, if you try
to build all packages, Python3 detects the bluetooth
headers installed by bluez.
It looks like Python's bluetooth support was somewhat
broken ; it was not detecting the <bluetooth/bluetooth.h>
header, so a backport from Python3 to Python fixed that.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Two important configuration files, /etc/php7-fpm.conf and
/etc/php7-fpm.d/www.conf are silently overwritten on each php7-fpm
upgrade or lost on a sysupgrade.
This commit adds the conffiles section for php7-fpm and revises
the conffiles section for php7.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
Jeffery To
Alexandru Ardelean
Matthias Schiffer
Luiz Angelo Daros de Luca
Michael Heimpold
Philip Prindeville
Hannu Nyman
Alexander Couzens
Waldemar Konik
Lucian Cristian
Tomasz Maciej Nowak
Val Kulkov
mike mcginty
Karl Palsson