Even though error was fixed the interface checks still fails, if last_resort
was set to blackhole or unreachable.
To fix this issue do not remove failure interface from iptables change on
down event.
Reported-by: Colby Whitney <colby.whitney@luxul.com>
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
If two interface have the same prefix "wan" for example "wan" and "wan1"
pgrep returns the PID for wan1 also "pgrep -f mwan3track wan".
Before this fix "wan1" was also killed! This is not what we want.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* print only 'missing plugins support warning' if user really configured
'blacklist' or 'block_ipv6' parameter.
Signed-off-by: Dirk Brenken <dev@brenken.org>
When the strongswan service is running, `ipsec status` returns 0. Check
the return value instead of checking its output.
While at it, remove the [[ ]] bashism, use rereadall instead of
(reread)secrets, and move it inside the if statement.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
In commit 36e073d820, some checks were
added to see if the UCI config file exists and if there are any peers
configured in it. Due to these checks, if /etc/config/ipsec exists, but
contains no enabled peers, strongswan will not be started. This is not
ideal, as a user might want to experiment with the UCI config while
keeping existing connections in /etc/ipsec.conf operational.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Since the strongswan-utils package now only contains the aging ipsec
utility, rename it to strongswan-ipsec.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We currently include the SCEP client in strongswan-utils, which is a
dependency of the strongswan-default meta-package. As it's generally not
recommended to generate keys on embedded devices due to lack of entropy,
move the SCEP client to a separate package, and only depend on it in the
strongswan-full meta-package.
While at it, add scepclient.conf to the package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
We currently include the PKI tool in strongswan-utils, which is a
dependency of the strongswan-default meta-package. As it's generally not
recommended to generate keys on embedded devices due to lack of entropy,
move the PKI tool to a separate package, and only depend on it in the
strongswan-full meta-package.
While at it, add pki.conf to the package.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* Update nmap-suite to 7.60
* Use PKG_HASH as PKG_MD5SUM is deprecated
* Switch download URL to HTTPS
* Add zlib as dependency and link libpcre dynamically
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* Start dnscrypt-proxy from procd interface trigger rather than
immediately in init, to fix a possible race condition during boot and
get rid of rc.local restarts. You can restrict trigger interface(s) by
'procd_trigger' in new global config section.
* tab/whitespace cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
* add preliminary kresd dns backend support for turris devices,
see readme (experimental / untested!)
* use tld compression for overall list, too
* cosmetics
Signed-off-by: Dirk Brenken <dev@brenken.org>
Adds support for interface tracking using either ping, arping or
httping. This allows to track interface status on networks with filtered
ICMP traffic or simply to monitor data link layer etc.
To facilitate binding to a specified interface its IP address is passed
as a new mwan3track parameter. It's currently required by httping
and possibly by other tools that may be added in the future.
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
0.9.1
backend:
* load procd reload trigger only in 'manual' mode
* documentation update
frontend:
* further optimized Station Overview & Scan page,
especially for mobile devices
* add a "Rescan" button in manual mode on overview page
* XHTML fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
I do not use this software any more and due to lack of time, I give the
maintenance responsibility back to the community.
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
This commit introduces nlbwmon, the lightweight NetLink BandWidth Montor.
The nlbwmon daemon gathers per-host traffic statistics by querying netlink
accounting data. Due to this approach, the executable is very small and does
not rely on libpcap and CPU intensive raw sockets to monitor traffic.
Besides raw per-host traffic counters, nlbwmon also support rudimentary
traffic classification by observing IP protocols and used port numbers.
Gathered accounting data is stored into a series of database files which
are regularily committed to persistent storage.
Refresh, commit and accounting intervals are freely configurable as well
as the layer7 protocol mapping rules and observed source subnets.
This package also bundles a cli client which can be used to dump the
gathered traffic data as JSON, CSV or plaintext data. A pull request to
add a graphical LuCI frontend for nlbwmon is pending.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
The softethervpn does not actually supported CCFLAGS, or other standard
variables, so we need to override CC to include all of those to fix
build errors with external toolchains.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
- It's a common practice that assert should be ignored in release build
- Whether to enable ssp should be decided by the config of build system
This was taken from Makefile in shadowsocks/openwrt-shadowsocks.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Package version upgraded to 2.5 with patches:
- Fixed compiler warnings
- Fixed miscalculated response time
- Reduced binary size by stripping unused code
Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
Florian Eckert
Kevin Darbyshire-Bryant
Philip Prindeville
Daniel Engberg
Dirk Brenken
Stijn Tintel
Peter Wagner
Christian Schoenebeck
Lars Schumann
Yousong Zhou
Marcin Jurkowski
Jo-Philipp Wich
Alexandru Ardelean
Daniel Salzman
Jason A. Donenfeld
Noah Meyerhans
Florian Fainelli