The intended behavior is to has the buildbot select all the applets
as well as packages only selecting what they need. This should do it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
As some ipq40xx CPUs support frequency scaling, enable building
collectd-mod-cpufreq for ipq40xx (for private builds) and
its package architecture brcm2708_bcm2709 (for buildbot)
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
MariaDB 10.4 includes some changes in sql/sql_statistics.cc that require
std::fmin and std::fmax. But these functions aren't available when
libstdc++ is compiled against uClibc, because uClibc doesn't pass the
test when libstdc++ checks for C99 math that supports "TR1" facilities
(macro: GLIBCXX_CHECK_C99_TR1).
Hence compilation fails:
[ 90%] Building CXX object sql/CMakeFiles/sql.dir/sql_table.cc.o
/builder/shared-workdir/build/sdk/build_dir/target-arc_archs_uClibc/mariadb-10.4.10/sql/sql_statistics.cc: In member function 'void Column_statistics_collected::finish(ha_rows, double)':
/builder/shared-workdir/build/sdk/build_dir/target-arc_archs_uClibc/mariadb-10.4.10/sql/sql_statistics.cc:2533:20: error: 'fmax' is not a member of 'std'
val = std::fmax(estimate_total_distincts * (rows - nulls) / rows, 1.0);
This commit updates package dependencies to prevent a build against
uClibc. There is no reason to waste CPU cycles on the build bots.
The dependencies are also tidied up. In the past it made sense to define
MARIADB_COMMON_DEPENDS and MARIADB_COMMON_DEPENDS_EXE, because the
server had different dependencies compared to the library. But since the
library is now in its own package we can remove the differentiation.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
CMake is faster and allows to simplify the Makefile slightly. It also
creates a slightly smaller package for some reason.
Fixed license information.
Ran postinst through shellcheck. It was using bashisms.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Drop the config knob 'listen_address' and introduce 'listen_interface'
and 'listen_ipv6' instead.
'listen_interface' takes an openwrt interface name ('loopback', 'lan',
'wan' etc, or "*" for all), from which the primary IP is used to listen
on. If 'listen_ipv6' is set to '1', the IPv6 adress will be used, IPv4
elsewise.
procd interface triggers are now combined with this, so if the listen
interface is not yet configured when the init script is executed, the
process start is defered, and the trigger takes care of that once
the interface is ready.
Fixes#7670
Signed-off-by: Andre Heider <a.heider@gmail.com>
This adds a few lines to the BuildPlugin routine to install some missing
files for auth_pam as well as ha_spider.
It also adds a postinstall script that updates the ownership of a
directory used by auth_pam.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This way when only wanting the library nobody needs to download and
compile the server package, saving space and time. Also this way we can
avoid sudden SONAME bumps during a server upgrade.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
This moves mariadb-common into its own (tiny) package in preparation for
moving out libmariadb as well. Otherwise the library would have a
dependency on the big mariadb package.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Highlights:
- Bump from 10.2.26 to 10.4.10
- auth_pam got replaced with never version, old one still available as
auth_pam_v1
- semisync plugins were merged into the core
- Upstream now installs symlinks for binaries with mariadb prefix. To
accommodate that this commit updates Package/mariadb/install/bin
accordingly.
- Patches are updated with new ones from Debian and Arch (thanks!)
- libedit patch dropped because it's upstream now.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Update collectd to 5.10.0
* leave new plugins as disabled for now (procevent, sysevent)
* refresh patches. Remove unenecessary version fix
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Add the OpenWrt TARGET_LDFLAGS to the compile command to activate PIE support
for the io tool when it is activated globally in OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
On 64 bit Linux systems long is 8 bytes long, on 32 bit Linux systems it
is 4 bytes long. Here we want to print 4 bytes and not 8 bytes, use int
instead of long.
This fixes printing 4 bytes on 64 bit systems.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is need by eg. gpsd to build with proper PPS support.
It was already submitted once in #2892 which ended in a stalemate.
Signed-off-by: Wolfgang Breyha <wbreyha@gmx.net>
Switched to codeload for simplicity.
Switched to PKG_INSTALL for consistency.
Added PKG_BUILD_PARALLEL for faster compilation.
Added extra utilities added by the newer version.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Adjust the reaction to a polling interval timestamp that references
to a past time.
Past timestamps can happen when ntpd adjusts router's time after network
connectivity is obtained after boot. Collectd shows warnings for each plugin
as it tries to enter new values with the same timestamp as the previous one.
This patch adjusts the next polling time to be now+2 seconds for the main
loop and for the plugin-specific read loops. That avoids the warnings, but
does not overreact in case there are shorter polling intervals or the time
gets adjusted for other reasons.
Additionally some debug statements are aded, but they are visible only
when --enable-debug configure option is used in Makefile.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Indeterminably vim/host fails on the build bots:
objects/fileio.o: In function `readfile':
fileio.c:(.text+0x5b3f): undefined reference to `libiconv_close'
fileio.c:(.text+0x61ad): undefined reference to `libiconv_close'
fileio.c:(.text+0x62f6): undefined reference to `libiconv'
fileio.c:(.text+0x6794): undefined reference to `libiconv_close'
objects/fileio.o: In function `buf_write_bytes':
fileio.c:(.text+0xa1fe): undefined reference to `libiconv'
fileio.c:(.text+0xa54a): undefined reference to `libiconv'
objects/fileio.o: In function `buf_write':
fileio.c:(.text+0xaf48): undefined reference to `libiconv_close'
objects/mbyte.o: In function `my_iconv_open.part.18':
mbyte.c:(.text+0x2ced): undefined reference to `libiconv_open'
mbyte.c:(.text+0x2d3a): undefined reference to `libiconv'
mbyte.c:(.text+0x2d5f): undefined reference to `libiconv_close'
objects/mbyte.o: In function `convert_setup_ext':
mbyte.c:(.text+0x33bf): undefined reference to `libiconv_close'
objects/mbyte.o: In function `string_convert_ext':
mbyte.c:(.text+0x363c): undefined reference to `libiconv'
collect2: error: ld returned 1 exit status
link.sh: Linking failed
Makefile:1949: recipe for target 'vim' failed
This is addressed by pulling in libiconv/host. Also configure switches
are added that keep external dependencies to a minimum, for instance
avoiding to link to X11 or gettext.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Just Need runtime tests
* libsane dependency on libusb moved to those drivers that requires it
* clean up some ./configure args
* added saned-ricoh2 for new backend
* enabled saned-gphoto2 (after c8fbe26c53)
* disabled kvs40xx and mustek_usb2 that requires pthread while the issue is
not solved (https://gitlab.com/sane-project/backends/issues/153)
* patches refreshed:
- 002-remove-uneeded.patch
* patches dropped:
- 031-fix_uclibc.patch
- 050-remove_linked_libs_for_unused_preload.patch (with --disable-preload)
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Rosen Penev
Hannu Nyman
Josef Schlehofer
Sebastian Kemper
Yousong Zhou
Etienne Champetier
Zoltan Haindrich
Andre Heider
Johann Neuhauser
Hauke Mehrtens
Hauke Mehrtens
Wolfgang Breyha
Yuhei OKAWA
Luiz Angelo Daros de Luca
Peter Liedholm
Hirokazu MORIKAWA
Gerard Ryan