/net/crowdsec/
Crowdsec - An open-source, lightweight agent to detect
and respond to bad behaviours.
It also automatically benefits from a global community-wide
IP reputation database.
Signed-off-by: Kerma Gérald <gandalf@gk2.net>
Open vSwitch supports SSL to connect to an OpenFlow controller. This is
recommended for security. Expand the UCI ovs config section to allow
configuring SSL CA, certificate and private key.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The Open vSwitch init script does not set USE_PROCD=1. Instead, it
defines most of the functions and variables that would be set when
USE_PROCD is set to 1, but with some minor changes.
The basescript variable however, which is used when calling
procd_open_service and procd_kill, is not set. As a result, basename of
the contents of the initscript variable is used as the service name. As
the service is automatically started via its symlink in /etc/rc.d,
S15openvswitch, the service name is S15openvswitch.
Set the basescript variable so that the service name is openvswitch.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
By default, Open vSwitch will generate the OpenFlow datapath ID of a
bridge based on the MAC address of one of its ports. Due to this, it's
possible that the datapath ID changes when new ports are added. When the
datapath ID changes, Open vSwitch disconnects from the controller, as
there is no way to notify the controller that the datapath ID has
changed.
Add an option to set the datapath ID so that the above situation can be
avoided. The option takes either exactly 16 hex characters, or when
prefixed with 0x, between 1 and 16 hex characters.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
The config symbol is named CONFIG_OPENVSWITCH_WITH_LIBUNBOUND, so check
for that instead of the non-existent CONFIG_OPENVSWITCH_WITH_UNBOUND.
Fixes: 45c8cc9d8a ("openvswitch: make libunbound optional")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
support for 21.02.0-rc2 and up
support for reloading a single interface on ifup/ifupdate
rename config file
updated shellcheck compatibility
remove obsolete create/remove_lock
interface processing optimizations to speed up reloads
drop dependency on curl in user scripts
uniform styling of functions
Signed-off-by: Stan Grishin <stangri@melmac.net>
Installing openvswitch on an x86/64 snapshot image pulls in a bunch of
dependencies, good for a total size of 3648406 byte. Disabling
libunbound reduces that with 559941 byte, for a total of 3088465 byte.
This is quite a big reduction for a small tradeoff: without libunbound,
hostnames can not be used to specify OpenFlow managers or controllers.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* code cleanup
* add auto login script for Julianahoeve beach resort (NL)
* add auto login script for Vodafone hotspots (DE)
* add auto login script for telekom hotspots (DE)
* enhance captive portal detection to support html redirects as well
* change default captive portal detection url to
'detectportal.firefox.com'
Signed-off-by: Dirk Brenken <dev@brenken.org>
Building without the mirror-tarballs fails to PKG_SOURCE_SUBDIR not
matching the hostapd source subdir name. Fix that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The current way to add ports to an Open vSwitch bridge does not allow
complex port configurations. Use a dedicated uci config section per port
instead of the current port:type syntax. This way we can easily support
more features like setting the VLAN tag or the OpenFlow port number.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Calling the ovs_bridge_init function when stopping the service will
result in ovs-vsctl being called after ovsdb-server has been shut down.
This causes the following error:
ovs-vsctl: unix:/var/run/openvswitch/db.sock: database connection failed (No such file or directory)
Calling the ovs_bridge_init function when requesting the service status
has no added value.
Only call ovs_bridge_init during start or restart to fix this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
CI run fails due to dirty patches, so refresh them.
Fixes: f4f1a25e80 ("openvswitch: bump to version 2.15.0")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
bugfix: domain names bypass
rename config file
update Makefile
updated README link
updated shellcheck compatibility
support for 21.02.0-rc2 and later
updated code for interface triggers
add newline to test.sh
Signed-off-by: Stan Grishin <stangri@melmac.net>
- Bump yggdrasil-go version to v0.4.0
- Update ygguci tool for compatibility with the new yggdrasil-go version
- Yggdrasil's config file is now generated in a separate command before running the daemon
Signed-off-by: George Iv <zhoreeq@users.noreply.github.com>
This matches an ipv4 change in 21f5cdd2fa and has the same rationale.
Google requires https for both ipv6 and ipv6.
Signed-off-by: Scott Lamb <slamb@slamb.org>
A simple DNS proxy server that supports all existing DNS protocols
including DNS-over-TLS, DNS-over-HTTPS, DNSCrypt, and DNS-over-QUIC.
Moreover, it can work as a DNS-over-HTTPS, DNS-over-TLS or
DNS-over-QUIC server.
For documents, see https://github.com/AdguardTeam/dnsproxy.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
A simple command line utility to make DNS lookups. Supports all known
DNS protocols: plain DNS, DoH, DoT, DoQ, DNSCrypt.
For documents, see https://github.com/ameshkov/dnslookup.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
User that don't control both OpenVPN client and server
might still need LZO support, so keep it enable by default for at least
OpenSSL variant.
Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
The commit updating the seccomp filter didn't bump PKG_RELEASE.
Do that now.
Fixes: 1141ee1e5 ("transmission: add new syscalls to seccomp filter)"
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Testing showed that additional syscalls are needed on ARMv7.
Add "getegid32", "geteuid32", "getgid32" and "getrandom" as they are
all innocent.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
555268b ubus: filter neighbors by SSID when preparing nr
3db9607 data storage: match SSID when searching ap entry
a22f5a7 storage: ensure SSID strings are NULL-terminated
Signed-off-by: Nick Hainke <vincent@systemli.org>
Makefile changes include:
* Remove USE_UCLIBC, as uclibc is no longer supported
* Package output modules
* Move main binary (back) to /usr/sbin, as it is system administration
related and requires superuser privileges
New patches:
* 003-add-space-for-null-byte.patch - from
374cfd2cab
* 004-more-specific-library-linking.patch - from
27b57d9da3
* 005-use-c99-format-macro-constants.patch - from
https://github.com/fln/addrwatch/pull/28
Init script changes include:
* Change from explicit disable to explicit enable, so that the service
is disabled by default and on first install
* Set config option default values to default values of the main binary
* Fix command-line option names and format (from
https://forum.openwrt.org/t/cant-start-addrwatch-service/60499/3)
* Always use the --quiet command-line option, as the procd instance is
not configured to capture stdout/stderr
* Change the syslog config option to start the syslog output module
Signed-off-by: Jeffery To <jeffery.to@gmail.com>
Until now the additional tables listed in gobal 'rt_table_lookup' were
not considered for interfaces.
In order to be able to also use interface-defined routes from tables
other than main, consider also tables listed in 'rt_table_lookup'.
Update version to 2.10.10 as requested by maintainer.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Kerma Gérald
Stijn Tintel
Nick Hainke
Josef Schlehofer
Rosen Penev
Stan Grishin
Dirk Brenken
Daniel Golle
Tianling Shen
Felix Fietkau
Jan Hak
George Iv
Scott Lamb
Noel Kuntze
DENG Qingfang
Etienne Champetier
Wojciech Dubowik
Florian Eckert
Jeffery To
Peter van Dijk